ZigBee Smart plug
Lámhleabhar Úsáideora

Réamhrá Táirge

Tá meáchan an fheiste níos lú ná 1 kg. Moltar airde suiteála níos lú ná 2 m.

Treoracha suiteála

1. Cumhacht as Chun turraingí leictreacha a sheachaint, téigh i gcomhairle leis an déileálaí nó le gairmí cáilithe chun cabhair a fháil agus tú ag suiteáil agus ag deisiú.
2. Treoir sreangú
   Cinntigh an sreangú ceart sula gcuirfeá an gléas ar siúl. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Sonraíochtaí

Cineál Táirge	Breiseán Cliste Zigbee
Ionchur	100-240VAC 50/60Hz
Aschur	100-240VAC 50/60Hz
Uas.Luch	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Ábhar	PC VO

Gnéithe

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Cianrialú	Sceideal Ama
Rialú Gutha	Rialú Comhroinnte
Radharc Cliste

The above functions are determined by the ZigBee Hub.

Treoir Oibriúcháin

1. Íoslódáil an APSS
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Lí

2. Ceangal mol
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Stiúideo macalla
   Echo Plus (samhail: ZE39KL)
   2ú Seó Gen Echo (samhail: DW84JL)
   2ú Gen Echo Plus (samhail: L9D29R)
   Mol Samsung SmartThings
   Philips Hue
   Má theipeann ar an nasc, bog an mol níos gaire do do ghuthán agus bain triail eile as.
3. Cumhacht ar
   Tar éis cumhacht a thabhairt dó, rachaidh an gléas isteach sa mhodh péireála le linn na chéad úsáide, agus flashes an táscaire comhartha LED.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Ceangail le Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Ceangail le SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Athshocrú Monarcha

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Déanta sa tSín

Doiciméid / Acmhainní

ZigBee Light Switch Module [pdfLámhleabhar Úsáideora Light Switch Module, Switch Module, Module

Tagairtí

• Lámhleabhar Úsáideora