ZigBee Smart plug
Manual mai amfani

Gabatarwar Samfur

Nauyin na'urar bai wuce kilogiram ɗaya ba. Ana ba da shawarar tsayin shigarwa na ƙasa da 1 m.

umarnin shigarwa

1. A kashe wuta Don guje wa girgizar wutar lantarki, da fatan za a tuntuɓi dila ko ƙwararren ƙwararren don taimako lokacin girka da gyarawa.
2. Umarnin waya
   Tabbatar da daidai wayoyi kafin kunna na'urar. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Ƙayyadaddun bayanai

Nau'in Samfur	Zigbee Smart Toshe
Shigarwa	100-240VAC 50/60Hz
Fitowa	100-240VAC 50/60Hz
Max.Load	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Kayan abu	PC VO

Siffofin

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Ikon nesa	Jadawalin Lokaci
Ikon murya	Raba Sarrafa
Yanayi mai Kyau

The above functions are determined by the ZigBee Hub.

Umarnin Aiki

1. Zazzage APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Hue

2. Haɗin mahaɗin
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (samfurin: ZE39KL)
   Nunin Echo na Gen na biyu (samfurin: DW2JL)
   2nd Gen Echo Plus (samfurin: L9D29R)
   Samsung SmartThings hub
   Philips Hue
   Idan haɗin ya gaza, da fatan za a matsar da cibiya kusa da wayarka kuma a sake gwadawa.
3. A kunne
   Bayan kunna wuta, na'urar za ta shiga yanayin haɗawa yayin amfani da farko, kuma alamar siginar LED tana walƙiya.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Haɗa zuwa Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Haɗa zuwa SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Sake saitin masana'anta

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Anyi a China

Takardu / Albarkatu

ZigBee Light Switch Module [pdf] Manual mai amfani Light Switch Module, Switch Module, Module

Magana

• Manual mai amfani