ZigBee Smart plug
User Manual
Produkt Yntroduksje
It gewicht fan it apparaat is minder as 1 kg. De ynstallaasje hichte fan minder as 2 m wurdt oanrikkemandearre.
Ynstallaasje ynstruksjes
- Power off
Om elektryske skokken te foarkommen, rieplachtsje asjebleaft de dealer of in kwalifisearre profesjonele foar help by it ynstallearjen en reparearjen. - Wiring ynstruksje
Soargje derfoar dat de bedrading goed is foardat jo it apparaat oansette.
S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.
Spesifikaasjes
| Produkt Type | Zigbee Smart Plug |
| Ynfier | 100-240VAC 50/60Hz |
| Utfier | 100-240VAC 50/60Hz |
| Max.Load | 10A/13A/16A/20A |
| ZigBee | IEEE 802.15.4 2.4GHZ |
| Materiaal | PC VO |
Features
ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.
 Remote Control |
 Timingskema |
 Stim kontrôle |
 Diele kontrôle |
 Smart Scene |
|
The above functions are determined by the ZigBee Hub.
Operating Instruction
- Download de APP
Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:
SmartThings Amazon Alexa Hue - Hub ferbining
Set the hub according to the user guide.
Support ZigBee plug hubs as follows:
Echo Studio
Echo Plus (model: ZE39KL)
2e Gen Echo Show (model: DW84JL)
2e generaasje Echo Plus (model: L9D29R)
Samsung SmartThings hub
Philips Hue
As de ferbining mislearret, ferpleatse asjebleaft de hub tichter by jo tillefoan en besykje it nochris. - Power oan
Nei it ynskeakeljen sil it apparaat de koppelingsmodus yngean by it earste gebrûk, en de LED-sinjaalindikator knippert.
The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release. - Ferbine mei Alexa
1. Power on the Plug
2. Ask, “Alexa, discover devices!
3. Plug ashes once it’s connected
4. Wait until Alexa finishes, check the new devices” First/Second….plug”
Ferbine mei SmartThings
- Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
- Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”
Fabriek weromsette
Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.
If you pair the device with the hub again, please reset the device to factory default.
Makke yn Sina
Dokuminten / Resources
 |
ZigBee Light Switch Module [pdf] Brûkershânlieding Light Switch Module, Switch Module, Module |