ZigBee Smart plug
Panduan Pengguna

Pengenalan Produk

Berat perangkat kurang dari 1 kg. Ketinggian pemasangan disarankan kurang dari 2 m.

Petunjuk instalasi

1. Matikan daya Untuk menghindari sengatan listrik, silakan berkonsultasi dengan dealer atau profesional yang berkualifikasi untuk mendapatkan bantuan saat memasang dan memperbaiki.
2. Instruksi pengkabelan
   Pastikan kabel yang benar sebelum menyalakan perangkat. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Spesifikasi

Tipe Produk	Steker Pintar Zigbee
Masukan	Tegangan 100-240 VAC 50/60 Hz
Keluaran	Tegangan 100-240 VAC 50/60 Hz
Muat	10A/13A/16A/20A
Sistem ZigBee	IEEE 802.15.4 2.4GHZ
Bahan	VO PC

Fitur

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Kontrol Jarak Jauh	Jadwal Waktu
Kontrol Suara	Kontrol Berbagi
Adegan Cerdas

The above functions are determined by the ZigBee Hub.

Instruksi Pengoperasian

1. Unduh APLIKASINYA
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   Benda Pintar	Kontak Amazon.com	Warna

2. koneksi hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Studio Gema
   Gema Ditambah (model: ZE39KL)
   Pertunjukan Gema Generasi Kedua (model: DW2JL)
   Echo Plus Generasi Kedua (model: L2D9R)
   Pusat Samsung SmartThings
   Philips Warna
   Jika koneksi gagal, dekatkan hub ke ponsel Anda dan coba lagi.
3. Nyalakan daya
   Setelah dihidupkan, perangkat akan memasuki mode berpasangan selama penggunaan pertama, dan indikator sinyal LED berkedip.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Hubungkan ke Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Terhubung ke SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Reset Pabrik

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Dibuat di Tiongkok

Dokumen / Sumber Daya

ZigBee Light Switch Module [Bahasa Indonesia:] Panduan Pengguna Light Switch Module, Switch Module, Module

Referensi

• Panduan Pengguna