I-Handytrac Trac Biometric Key Control User Guide

Izingxenye Zihlanganisiwe

Siyakuhalalisela ngokuthenga Uhlelo lwakho Olusha Lokulawula Ukhiye We-HandyTrac. Le khithi ihlanganisa yonke into oyoyidinga ukuze usethe isistimu. Uma unemibuzo mayelana nale nqubo sicela uxhumane nochwepheshe be-HandyTrac ku 888-458-9994 noma i-imeyili service@handytrac.com.

Nakhu okuhlanganisa le kit:

NAKHU OKUDINGAYO

(Ikhasimende lidinga ukuhlinzeka) Izingxenye Ezidingekayo:

1. I-Uninterruptible Power Supply (UPS) yokuvikela ukuhlinza namandla ebhethri ayisipele.
2. Ama-Mounting Fasteners akwazi ukubamba ama-50 lbs. wokwakha, udonga olomile, izinkuni noma izikhonkwane zensimbi.

Amathuluzi Ayadingeka: 

1. I-Drill & Drill Bits
2. Izinga
3. I-Flat Head Screwdrivers
4. Phillips Head Screwdrivers
5. Udlawu

Uxhumano Lwe-inthanethi: 

1. I-HandyTrac izohlinzeka ngentambo yenethiwekhi engamamitha angu-6. Uma udinga ubude obude uzodinga ukuyithenga.

Nasi isifinyezo sezinyathelo zokufaka Isistimu yakho

Zijwayeze nalezi zinyathelo ngaphambi kokuthi uqale!

1. Agibele iKhabhinethi odongeni
2. Khipha Ibhokisi Lokulawula kanye Nekhiphedi Yedatha odongeni
3. Faka Amaphaneli Abalulekile

Imiyalelo Yokufaka Ikhabhinethi

1. Thola i-stud align stud okungenani enembobo eyodwa kweziyisithupha ezibhoboziwe phezulu ekhabetheni. Sincoma ngokuqinile ukuthi unamathisele ikhabethe ku-stud, uma kungenzeka.
2. Ikhabethe lebhokisi lesitaki langena futhi ibhokisi lelo bhokisi lokulawula langena phezu kwelinye.
3. Lokhu kuzokunikeza inkundla engu-42″ ephezulu.
4. Beka ikhabethe phezu kwala mabhokisi amabili kanye nezinga phezulu kwekhabhinethi.
5. Lapho ulinganisa ikhabhinethi, sebenzisa ipensela ukumaka izimbobo zakho.
6. Uma zonke izimbobo zimakisiwe, sebenzisa izikulufu ezingena okungenani amayintshi angu-2 ku-stud namahange obondeni akwazi ukubamba okungenani ama-lbs angu-50. Landela iziqondiso zomkhiqizi zamahange odongeni.
7. Mount Cabinet- Phakamisa ikhabhinethi endaweni. Qinisa zonke izinsimbi eziqinile, kodwa hhayi eziqinile kakhulu. Beka izinga lakho phezu kwekhabhinethi futhi uhlole ngokuphindaphindiwe njengoba uqinisa zonke izinsimbi.

Ukuqondaniswa Komnyango

Hlola igebe phakathi komnyango nohlaka lomnyango phezulu, phansi naseceleni. Uma igebe lingafani ngaso sonke isikhathi, ikhabhinethi kuzodingeka ukuthi icwebezeliswe ukuze kunxeshezelwe udonga olungalingani.
Amathiphu lapho ucwebezela:

1. Sebenzisa insimbi noma ipulasitiki-ukhuni kanye nerabha akubambi ukuma kwawo kahle.
2. Uma igebe phezulu likhulu kunegebe elingezansi, shima phezulu kwekhabhinethi ekhoneni elingakwesokudla.
3. Uma igebe elingezansi likhulu kunegebe phezulu, shima phansi kwekhabhinethi ekhoneni elingakwesokudla.

Khipha Ibhokisi Lokulawula

Bamba i-Control Box uyishaye eceleni kwekhabhinethi. Imbobo ye-Electronic Lock eseceleni kwekhabhinethi kufanele ihambisane ne-Electronic Lock Cables esuka ku-Control Box. Ngaphambi kokukhweza Ibhokisi Lokulawula, phakela ngobumnene Amakhebuli Okhiye We-Electronic ngembobo yekhebula le-Electronic Lock elingakwesokudla seKhabhinethi Ebalulekile. Bophela Ibhokisi Lokulawula odongeni. Xhuma Ikhebula Lokukhiya Kagesi Kusixhumi Sokukhiya Kagesi ngaphakathi kweKhabhinethi Eyisihluthulelo. Thinta ikhebula kuziqeshana ezibambile ngaphakathi kwekhabethe ukuze uvimbele ukuthintana namaphaneli angukhiye ngesikhathi sokusebenza. Ungakhohlwa mayelana ne-UPS yakho !!! (Ukuphakela Amandla Okungaphazamiseki) Isiqinisekiso sizovalwa uma i-UPS ingasetshenziswa.

Khipha Amaphaneli Abalulekile

Iphaneli ngayinye ibhalwe ngohlamvu ekhoneni elingaphandle elingezansi, futhi ihuku ngalinye linenombolo. Amaphaneli kufanele abekwe ngokulandelana kwe-alfabhethi kusukela phambili kuya emuva kukhabhinethi. Shelelisa iphinikhodi yephaneli ephezulu embobeni kubakaki bokukhweza bephaneli yokhiye ongaphezulu. Phakamisa iphaneli ifike phezulu njengoba izohamba bese uzungezisa iphinikhodi efakwayo engezansi embotsheni ehambisanayo kubakaki abaphansi. Yehlisa iphaneli endaweni. Phinda kuwo wonke amaphaneli.

Ilungiselela ukusethwa

Iskena ukhiye wakho tags
Thola izikhwama zokhiye onebhakhodi tags ukuskena. Lapho uwaskena ohlelweni, i-Datalog-Keypad izocela okhiye ngokulandelana kwezinombolo ngokwenombolo ye-Apartment. Awudingi ukulandela ukhiye tags phakathi nalesi sinyathelo. I-HandyTrac incoma ukunamathisela okhiye phela tags ziskenwa ohlelweni. QAPHELA: Ungase ufune ukushiya ukhiye wakho omdala Tags qhubeka izinsuku ezimbalwa uze uqonde ngokugcwele uhlelo lwe-HandyTrac.
ISINYATHELO SOKUQALA: Ukuxhuma Ikhebuli Yenethiwekhi kanye Nokusungula Ukuxhumana

• Usebenzisa isikrudrayiva esinekhanda eliyisicaba, susa isikulufu ngaphansi kwekhava emise okuka-L etholakala ngezansi kwe-Datalog-Keypad. Ukwehlukanisa ikhava emise okwe-L ku-Datalog-Keypad kuzodalula inethiwekhi noxhumo lwamandla.
• Yondla isiphetho samahhala sekhebula yakho yenethiwekhi ngembobo esike kuhlaka olungezansi Kwekhiphedi Yedatha.
• Xhuma isiphetho sekhebula yenethiwekhi kujack ephezulu ngakwesokunxele se-Datalog-Keypad.
• Ukukhanya okuqinile okuluhlaza eduze kwepulaki yenethiwekhi ku-Datalog-Keypad kuzoqinisekisa ukuxhumana okusebenzayo.
• Xhuma ikhebula lamandla le-Datalog-Keypad ku-UPS Backup Bettery. Isikhathi/usuku kufanele kuvele esibukweni, futhi ungahlola uxhumano lwakho ngokucindezela inkinobho engu-5 ku-Datalog-Keypad.
• Uma inkinobho yenombolo 5 icindezelwa i-Datalog-Keypad izokwazisa ukuthi uqale ukuskena okhiye bakho. Lokhu kubonisa ukuthi ukuxhumana kusungulwe ngeseva ye-HandyTrac.

KUBALULEKILE: Uma ukuxhumana kwehluleka i-Datalog-Keypad izoveza “COM CHECK FAILED SICELA UFONE 888-458-9994”. Ukucindezela inkinobho ethi "Enter" ku-Datalog-Keypad kuzoyibuyisela kusibonisi "sesikhathi/idethi" ukuze kuxazululwe ukuxhumana. QAPHELA: Kubalulekile ukuxhuma isistimu yakho ye-HandyTrac ku-UPS (Uninterruptable Power Supply) esebenza njengesipele sebhethri lakho kanye nedivayisi yokuvikela ukuhlinza. Ngaphandle kwe-UPS, ulwazi olubalulekile lungalahleka uma kwenzeka kuba namandlatage. Iwaranti izovalwa uma i-UPS ingasetshenziswa.

ISINYATHELO SESIBILI: Iskena Okhiye Kukhiphedi Yedatha

• Ngekhiphedi yedatha IVULIWE, cindezela inkinobho engu-5. Bese, uskena ukhiye onebhakhodi tag inombolo Yeyunithi/Ifulethi elibonisiwe (okungukuthi #101).
  Qaphela:  Uma uskena Ukhiye Tags khumbula ukuthatha isikhathi sakho. Kwesinye isikhathi kuba khona isikhashana phakathi kokuskena a tag bese ubona ulwazi luvela esikrinini. Uma lokhu kwenzeka futhi uskene ukhiye ofanayo ungaqondile tag kabili, i-Datalog-Keypad izobonisa okuthi “Duplicate Tag” umlayezo wephutha. Setha i- tag eceleni bese uqhubeka nokuskena Iyunithi/Ifulethi elilandelayo esohlwini lwesibonisi. Ungakwazi ke ukuskena "Impinda Tags” ngaphakathi ngemva kokuqedwa kokuskena ngokusebenzisa “ukhiye wokubuyisela” IN noma 01 ikhodi yomsebenzi.
• Ikhiphedi Yedatha ibonisa ibha yekhodi yangempela yeyunithi eskeniwe (okungukuthi 7044) futhi ikutshela ukuthi iyiphi ihuku ongayibeka kuyo (okungukuthi, A5). Iphinde ikutshele Iyunithi/Ifulethi elilandelayo ozoskena (okungukuthi #102).
• Qhubeka le nqubo kuze kube yilapho wonke ukhiye tags abekwe ezingwegweni zawo eziwukhiye ezifanele.
• Uma ukuskena sekuqediwe, Ikhiphedi yeDathalog yakho izoveza umlayezo "WENZIWE CIKOZA FAKA".
• Shayela i-HandyTrac ukuze isebenze ku- 888-458-9994. Ngesikhathi sokwenza kusebenze uzonikezwa igama lakho lomsebenzisi nephasiwedi ye-HandyTrac.com.
• Isistimu yakho ye-HandyTrac manje isikulungele ukuthi unamathisele okhiye bakho kukhiye onebhakhodi tags.

QAPHELA: Indlela efanele yokulengisa okhiye ngokhiye tagImbobo ye-punch ephakathi. Lokhu kuzobamba okhiye babekwe ngendlela efanele futhi bahleleke ukuze kube lula ukutholakala ngesikhathi sokusetshenziswa. Ngesikhathi sokusebenza kohlelo lwakho lwe-HandyTrac uzonikezwa Igama lomsebenzisi nephasiwedi ye-HandyTrac.com. Uma usungenile, usuyakwazi view imibiko ehlukahlukene njengombiko wokhiye wokuphuma, imibiko yeyunithi, isisebenzi kanye nomsebenzi. Imephu engukhiye ikhombisa indawo yamanje yesethi yezinkinobho. Lolu lwazi ludinga ukugcinwa luyimfihlo. Khumbula Ukuyigcina ENDAWENI EPHEPHILE noma kwenye IVIKELE.

Ukwengeza Isisebenzi

• Chofoza isixhumanisi esithi “ABASEBENZI” esikubha yomsebenzi ompunga
• Faka abasebenzi “Igama Lokuqala” kanye “Nesibongo” emikhakheni ehlonishwayo
• Faka “Inombolo Yebheji” (inombolo yebhakhodi “15”)
• Gcwalisa “Inombolo-PIN” (ungakhetha noma iyiphi inombolo ye-PIN oyithandayo)
• Khetha “Ileveli yokufinyelela” yalesi sisebenzi
• Isisebenzi - Abasebenzi abazovele badonse futhi babuyisele okhiye phakathi
• I-Master - Amalungelo agcwele okuphatha ohlelweni lwe-HandyTrac
• Faka uphawu lokuhlola ebhokisini elithi “Kuyasebenza” ukuze wenze lesi sisebenzi sisebenze
• Chofoza ku- "Engeza Umsebenzi Wokuvuselela"
• Cindezela inkinobho yokufaka eluhlaza okwesibhakabhaka ku-Datalog-Keypad ukuze uqalise isibuyekezo se-EOP.

Ukuhlela Isisebenzi

• Chofoza okuthi “ABASEBENZI” etholakala kubha yomsebenzi empunga
• Chofoza umcibisholo wokudonsela phansi kunkambu Yezisebenzi Ezisebenzayo
• Gqamisa bese uchofoza kusisebenzi ofisa ukusihlela
• Thayipha ukuhlela kulwazi lomsebenzi
• Chofoza ku- "Engeza Umsebenzi Wokuvuselela"
• Qalisa i-EOPA)

Ukuvala Isisebenzi
(Izisebenzi azikwazi ukususwa, zivalwa kuphela uma sezingeziwe)

• Landela iziqondiso zokuhlela Isisebenzi
• Susa umaka ebhokisini elisebenzayo
• Chofoza inkinobho ethi "Engeza/Buyekeza Isisebenzi" bese usebenzisa i-EOP.

UKUSEBENZA

Ukufinyelela Uhlelo
Le nqubo iyadingeka kuyo yonke imisebenzi.
(Uma unohlelo lwe-HandyTrac Biometric sicela ubhekisele ku-HandyTrac EASY GUIDE – Biometric System.)

1. Uhlelo kufanele lube sesikrinini Sesikhathi/Idethi ukuze umsebenzisi athole ukufinyelela.
2. Skena ibheji lesisebenzi sakho kulogi yedatha uhlangothi olunebhakhodi lubheke kulogi yedatha. Uzozwa ibhiphu, futhi isikrini sizoshintsha ukuze sibukeke kanje.
3. Faka i-PIN# yakho enamadijithi angu-4. Manje usuziveze njengomsebenzisi ogunyaziwe.
4. Isikrini sikwazisa ukuthi ufake umsebenzi.

Ungadonsa kanjani ukhiye

1. Finyelela kusistimu usebenzisa ibheji nephinikhodi yakho.
2. Faka Ikhodi Yomsebenzi enezinhlamvu ezi-2 - ubhekisele ohlwini oluthumele eduze Nerekhodi Lokusebenza.
3. Faka Ifulethi/Iyunithi# bese ucindezela inkinobho ethi ENTER.
4. Isikrini sibonisa indawo yehhuku, kulesi sifanisoample, yi-A46. Lapho ilokhi ye-elekthronikhi inqamuka, skena isethi yokhiye ngokusebenzisa isifundi sekhodi yebha ikhodi yebha ibheke Kulogi Yedatha.
5. Ungakwazi ukufaka enye indawo uma udinga izinkinobho ezingaphezu kweyodwa, noma ucindezele okuthi PHUMA ukuze uqedele umsebenzi wakho.
6. Uma ukhiye uphumile ohlelweni cindezela u-1 ukuze uthole ukuthi ubani onalo. Cindezela u-2 ukudonsa omunye ukhiye. Cindezela okuthi OUT ukuze uqedele umsebenzi wakho.

Indlela Yokubuyisela Ukhiye

1. Finyelela kusistimu usebenzisa ibheji nephinikhodi yakho.
2. Cindezela inkinobho eluhlaza "IN" noma faka ikhodi yomsebenzi 01 - Ikhi Yokubuyisela.
3. Ukhiye wokuskena tag ngokusebenzisa Ilogi Yedatha njengoba utshelwa isikrini.
4. Isikrini sizobonisa inombolo yehhuku efanele futhi ikhabhinethi izovula. Beka isethi yokhiye kuhhuku ekhonjiswe esikrinini.
5. Manje unezinketho ezingu-2… skena omunye ukhiye tag (uma ubuyisela okhiye abangaphezu kowodwa) noma cindezela u-OUT ukuze uqedele umsebenzi wakho. Vala ikhabethe ngokuphephile.

Kanjani Review Izikhiye Zokuphuma

1. Finyelela kusistimu usebenzisa ibheji nephinikhodi yakho.
2. Faka Ikhodi Yomsebenzi 06 – Audit Keys Phuma.
3. Isikrini sizobonisa uhlu lwazo zonke izinkinobho eziphumayo, eyodwa ngesikhathi (Sizonikeza iyunithi #, umuntu, idethi nesikhathi ukhiye othathwe ngaso).
4. Cindezela u-enter ukuze uskrole ohlwini.
5. Uma iyunithi yokugcina iboniswa uthola umlayezo: EKUPHELENI KOHLU – CINDEZA SULA NOMA PHUMA.

Ungakubonisa Kanjani Okwenziwayo Kokugcina

1. Finyelela kusistimu usebenzisa ibheji nephinikhodi yakho.
2. Faka Ikhodi Yomsebenzi 08 – Okwenziwa Kokugcina; isikrini sizobonisa umsebenzi wokugcina oyimpumelelo owuqedileampi-le ikhombisa 01 (ukhiye wokubuyisela) weyunithi #3 nesikhathi (11:50:52) Cindezela u-enter uma ufuna omunye umsebenzi noma cindezela u-OUT.

Hlela Ukhiye Tags

Uma ukhiye tag iyalahleka noma yonakale, uzodinga UKUHLELA endala tag ngaphandle kwe-Datalog-Key Pad.

UKUHLELA UKHIYE TAG

1. Finyelela kusistimu usebenzisa ibheji nephinikhodi yakho.
   • Ibheji kufanele ibe Nokufinyelela Okuyinhloko ukuze uhlele ukhiyetags!*
2. Faka Ikhodi Yomsebenzi 04 (ukhiye wokuhlela tag).
3. Faka ukhiye omdala tag inombolo. Uma ungenayo endala tag uzodinga ukubheka kumephu engukhiye.
4. SKENA okusha tag ukungena kuyo.
5. Isikrini siqinisekisa i- tag ishintshiwe. Uma ucindezela u-ENTER, isikrini sizobuyela kokuthi ENTER OLD TAG isikrini esinyathelweni sesi-3. Faka inombolo yeyunithi elandelayo ofuna ukuyishintsha noma cindezela u-OUT.

Shintsha i-APT / UNIT #

Lolu hlelo lukuvumela ukuthi uguqule igama Lendawo noma Into enokhiye abagcinwe kukhabhinethi. Fushanisa amagama ngangokunokwenzeka. Okwesiboneloample APT/UNIT#1 ingamela “Isitoreji”. Kuzokwenza ukuthi inqubo ihambe ngokushesha kakhulu futhi yenze kube lula ukudonsa okhiye uma ubadinga.

1. Skena ibheji lakho lomsebenzi bese ufaka i-PIN yakho enamadijithi angu-4.
2. Faka Ikhodi Yomsebenzi 02 (Shintsha
   I-APT/UNIT#). Uhlelo luzokhala, futhi likwazise ukuthi ufake iyunithi endala #. Thayipha i-APT/UNIT # ofuna ukuyishintsha bese ucindezela u-ENTER.
3. Isistimu izokwazisa ukuthi ufake i-APT/UNIT# entsha. Thayipha i-APT/UNIT # entsha bese ucindezela u-ENTER ukuze umiselele i-APT/UNIT #.
4. Uhlelo luqinisekisa ukuthi ukushintshwa kuqediwe. Cindezela okuthi ENTER ukuze umiselele i-APT/UNIT #. Cindezela okuthi CLEAR ukuze ushintshele komunye umsebenzi, noma cindezela u-OUT ukuze uqedele lesi sikhathi.

QAPHELA: Uma usebenzisa izinhlamvu ze-Alpha emagameni akho e-APT/UNIT#, bheka emuva ekhasini 8 ukuze uthole usizo. Fushanisa ngangokunokwenzeka; okwesibample: iyunithi yesitoreji 1 ingaba "i-S1".

AMAKHODI OMSEBENZI

888-458-9994
SULA Shintsha Ikhodi Yomsebenzi
Kudingeka Ibheji Eliyinhloko

• IGCINIWE
• noma IN Return Key
• Hlela i-Apt/Iyunithi # *
• IGCINIWE
• Hlela Ukhiye Tag*
• IGCINIWE
• Okhiye Bokuhlola Ukuphuma *
• IGCINIWE
• Umsebenzi wokugcina*
• IGCINIWE
• IGCINIWE
• Bonisa Iyunithi
• Bonisa Iyunithi/Isikhangiso 1
• Bonisa Iyunithi/Isikhangiso 2
• Bonisa/Umhlahlandlela ofanele
• Bonisa/Ukuqasha
• I-Show/Referral
• Bonisa/Okunye Ukudluliselwa
• Bonisa/Indawo
• Bonisa/Sign
• Umsebenzi 20
• Ukuhlolwa kwe-Mgmt
• Hlola Umnikazi/Umabolekisi
• Izinsiza: Igesi
• Izinsiza: Ezogesi
• Imidiya/Ikhebula
• I-Telcom
• Ukulawula Izinambuzane
• Ukuphepha/Ukuvikeleka
• I-Preventative Main
• I-Resident Lockout
• Isakhamuzi Sangena
• Ukukhiya Kweyunithi Shintsha 33 Iyunithi Yokukhipha Udoti
• I-Ready Unit/Turnkey 35 Iyunithi Yokupenda
• Hlanza Iyunithi
• Ukhaphethi ohlanzekile
• I-Punch Out Unit
• Izimpumputhe/Drapes
• I-Work Order
• Amapayipi amanzi
• I-Plg Kitchen Faucet 43 Plg Kitchen Sink 44 Plg Disposal
• I-Plg Bath Faucet
• I-Plg Bath Lavatory 47 Plg Tub/Shower 48 Plg Toilet
• Isifudumezi Samanzi Ashisayo 50 Umsebenzi 50
• I-HVAC
• I-HVAC Ayipholi
• Ukuvuza kwe-HVAC
• Umlandeli we-HVAC
• Isihlungi se-HVAC Thermostat 56 HVAC
• I-HVAC Akukho Ukushisa
• Umthengisi 1
• Umthengisi 2
• Umthengisi 3
• Izinto zikagesi
• Isiqandisi
• Isitofu
• Ihhavini
• Umshini wokuwasha izitsha
• I-Vent Hood
• I-microwave
• I-Compactor kadoti
• Iwasha
• Isomisi
• Ezogesi
• Amandla Ngaphandle
• Shintsha
• I-Outlet
• Ukukhanya
• Umlandeli
• Ngaphakathi
• Upende Wangaphakathi
• Ukuvuza Kwangaphakathi
• Ingaphakathi laphansi
• Ukubaza
• I-Crp Lock
• Umnyango we-Crp
• Iwindi le-Crp
• Isikrini se-Crp
• Crp Cab/Counter Top 87 Building Entry/Amahholo 88 Building Stairs
• Amakheshi Okwakha Ama-90 Basement/Isitoreji 91 Ngaphandle
• Uphahla
• I-Gutter/Downspouts 94 Ukukhanya Kwangaphandle
• I-Special In
• I-Special Out
• Isisebenzi IN
• Isisebenzi OUT

UDONSA KANJANI UKHIYE

1. Skena ibheji ku-Data Log / faka i-PIN #
2. Faka Ikhodi Yomsebenzi ohlwini olungaphezulu
3. Faka inombolo ye-Apt/Iyunithi
4. Susa isethi yokhiye bese uskena ukhiye tag
5. Faka indawo entsha noma cindezela u-OUT

UNGABUYISA KANJANI UKHIYE

1. Skena ibheji ku-Data\ Log - Faka i-PIN #
2. Cindezela inkinobho ethi IN
3. Skena ukhiye tag
4. Beka ukhiye ku-Hook # ekhonjiwe
5. Skena elinye isethi yezinkinobho noma cindezela PHUMA

UNGAKHOMBISA KANJANI UKWENZISWA KOKUGCINA 

1. Skena ibheji ku-Data Log / faka i-PIN #
2. Faka Ikhodi Yomsebenzi 08
3. Irekhodi ledatha libonisa umsebenzi wakho wokugcina

KANJANI REVIEW KHIYE OKUPHUMA

1. Skena ibheji ku-Data Log / faka i-PIN #
2. Faka Ikhodi Yomsebenzi 06
3. Cindezela okuthi ENTER ngokuphindaphindiwe ukuze uskene lonke uhlu
4. Cindezela okuthi OUT uma usuqedile

QAPHELA: Amakhodi Omsebenzi 11 kuya ku-98 angahlelwa kokuthi HandyTrac.com. QAPHELA: Amakhodi Omsebenzi 11 kuya ku-98 angahlelwa kokuthi I-HandyTrac.com.

Atlanta
510 Staguphondo Court
I-Alpharetta, GA 30004
Ucingo: 678.990.2305
Ifeksi: 678.990.2311
Inombolo Yamahhala: 800.665.9994
www.handytrac.com

Dallas
16990 North Dallas Parkway Suite 206
Dallas, TX 75248
Ucingo: 972.380.9878
Ifeksi: 972.380.9978
service@handytrac.com

I-Handytrac Trac Biometric Key Control User Guide

Landa i-PDF: I-Handytrac Trac Biometric Key Control User Guide

Izithenjwa

• Imaniwali yosebenzisayo