Allen-Bradley 2085-IF4 Micro800 4-Channel le 8-Channel Analog VoltagBukana ea Taelo ea E-Current Input le Output Modules
Kakaretso ea Liphetoho
Khatiso ena e na le lintlha tse latelang tse ncha kapa tse nchafalitsoeng. Lenane lena le kenyelletsa lintlafatso tsa bohlokoa feela 'me ha le reretsoe ho hlahisa liphetoho tsohle. Liphetolelo tse fetoletsoeng ha li fumanehe kamehla phetolelong ka 'ngoe.
| Sehlooho | Leqephe |
| Nchafatso e ntlafalitsoeng | Hohle |
| Tikoloho e Nchafalitsoeng le Sebaka se Koaletsoeng | 2 |
| Litlhokomeliso tse ntlafalitsoeng | 3 |
| E kentse molaoli oa Micro870 ho Overview | 4 |
| Litlhaloso tse Nchafalitsoeng tsa Tikoloho | 9 |
| Setifikeiti se ntlafalitsoeng | 9 |
Tikoloho le Sebaka
HLOKOMELA: Thepa ena e reretsoe ho sebelisoa tikolohong ea indasteri ea Pollution Degree 2, ka overvoltagLisebelisoa tsa Sehlopha sa II (joalokaha ho hlalositsoe ho EN/IEC 60664-1), sebakeng se bophahamong ho fihla ho 2000 m (6562 ft) ntle le ho nyenyefatsa. Thepa ena ha ea rereloa ho sebelisoa libakeng tsa bolulo 'me e ka 'na ea se ke ea fana ka tšireletso e lekaneng litšebeletsong tsa puisano tsa seea-le-moea libakeng tse joalo. Thepa ena e fanoa e le lisebelisoa tsa mofuta o bulehileng bakeng sa tšebeliso ea kahare. E tlameha ho kenngoa ka har'a sebaka se kampetsoeng se etselitsoeng hantle maemo a itseng a tikoloho a tla be a le teng le a etselitsoeng ka nepo ho thibela kotsi ea motho ka lebaka la ho fumaneha ha likarolo tsa bophelo. Sebaka se kampetsoeng se tlameha ho ba le thepa e thibelang malakabe e loketseng ho thibela kapa ho fokotsa ho ata ha lelakabe, ho latela tekanyetso ea ho ata ha lelakabe la 5VA kapa ho amoheloa bakeng sa kopo haeba e se tšepe. Bokahare ba sebaka se koaletsoeng bo tlameha ho fumaneha feela ka tšebeliso ea sesebelisoa. Likarolo tse latelang tsa khatiso ena li ka ba le lintlha tse ling mabapi le lintlha tsa mofuta oa sebaka se koaletsoeng tse hlokoang ho tsamaisana le litifikeiti tse itseng tsa polokeho ea sehlahisoa.
Ho phaella khatisong ena, sheba tse latelang:
- Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa tse ling
ditlhoko tsa ho kenya. - NEMA Standard 250 le EN/IEC 60529, ha e sebetsa, bakeng sa litlhaloso tsa likhato tsa ts'ireletso tse fanoeng ke libaka tse koetsoeng.
Thibela ho tsoa ha Electrostatic
HLOKOMELA: Sesebelisoa sena se na le maikutlo a ho tsoa ha electrostatic, e ka bakang tšenyo e ka hare le ho ama ts'ebetso e tloaelehileng. Latela litataiso tsena ha u sebetsana le thepa ena:- Thetsa ntho e theohileng ho tima ntho e ka bang teng.
- Apara lesela la letsoho le lumelitsoeng fatše.
- Se ke oa ama lihokelo kapa lithakhisa maboteng a likarolo.
- U se ke ua ama likarolo tsa potoloho ka har'a thepa.
- Sebelisa sebaka sa ho sebetsa sa static-safe, haeba se le teng.
- Boloka thepa ka har'a sephutheloana se loketseng se sa sebetseng ha se sa sebelisoe
Tumello ea Sebaka se Kotsi sa Amerika Leboea
Lintlha tse latelang lia sebetsa ha u sebelisa sesebelisoa sena libakeng tse kotsi:
Lihlahisoa tse tšoailoeng "CL I, DIV 2, GP A, B, C, D" li loketse ho sebelisoa ho Sehlopha sa I Division 2 Lihlopha A, B, C, D, Libaka tse Kotsi le libaka tse se nang kotsi feela. Sehlahisoa se seng le se seng se na le matšoao ho nameplate ea lintlha tse bontšang khoutu ea mocheso ea sebaka se kotsi. Ha o kopanya lihlahisoa ka har'a sistimi, khoutu ea mocheso e mpe ka ho fetesisa (nomoro e tlase "T") e ka sebelisoa ho thusa ho fumana khoutu ea mocheso o akaretsang oa sistimi. Metsoako ea lisebelisoa tsamaisong ea hau e itšetlehile ka lipatlisiso tsa Bolaoli ba lehae bo nang le Taolo nakong ea ho kenya.
TLHOKOMELISO: KOTSI EA HO PHAHAMA
- Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
Se ke oa hakolla likhokahano sesebelisoa sena ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi. Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena. - Phapanyetsano ea likarolo e ka 'na ea sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
TLHOKOMELO
- Sehlahisoa sena se thehiloe ka terene ea DIN ho ea sebakeng sa chassis. Sebelisa seporo sa tšepe sa DIN sa zinc-plated chromatepassivated steel ho netefatsa motheo o nepahetseng. Tšebeliso ea lisebelisoa tse ling tsa terene tsa DIN (mohlalaample, aluminium kapa polasetiki) tse ka senyang, tsa oxidize, kapa li-conductor tse futsanehileng, li ka fella ka ho theoha ho sa lokelang kapa ka nakoana. Sireletsa seporo sa DIN ho ea holim'a metsi hoo e ka bang limilimithara tse ling le tse ling tse 200 (7.8 in.) 'me u sebelise li-ankora ka nepo. Etsa bonnete ba hore u theola seporo sa DIN hantle. Sheba ho Industrial Automation Wiring and Grounding Guidelines, khatiso ea Rockwell Automation 1770-4.1, bakeng sa lintlha tse ling.
Ho latela lithibelo tsa UL, sesebelisoa sena se tlameha ho tsamaisoa ho tsoa mohloling o tsamaellanang le tse latelang: Class 2 kapa Limited Vol.tage/Hajoale. - Ho lumellana le CE Low Voltage Directive (LVD), I/O eohle e hokahantsoeng e tlameha ho tsamaisoa ho tsoa mohloling o tsamaellanang le tse latelang: Safety Extra Low Vol.tage (SELV) kapa Protected Extra Low Voltage (PELV).
- Ho hloleha ho hokela mojule oa terminator ea libese ho mojule oa ho qetela oa I/O oa katoloso ho tla fella ka phoso e thata ea molaoli.
- Se ke oa kenya li-conductors tse fetang 2 ho terminal efe kapa efe
TLHOKOMELO
- Ha o hokela kapa o hakolla Removable Terminal Block (RTB) o sebelisa matla a lehlakoreng la lebala, ho ka ba le arc ea motlakase. Sena se ka baka ho phatloha ho kenngoeng ha libaka tse kotsi. Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
- Haeba o hokela kapa o hakolla terata ha motlakase o ntse o le ka lehlakoreng la lebala, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi. Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
- Haeba o kenya kapa o tlosa mojule ha motlakase oa backplane o ntse o butse, ho ka hlaha arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi. Mojule ha o tšehetse "Ho tlosoa le ho kenya tlas'a matla" (RIUP) bokhoni. Se ke oa hokela kapa oa hakolla module ha motlakase o ntse o sebelisoa. Etsa bonnete ba hore motlakase o tlositsoe pele o tsoela pele.
- Se ke oa manolla li-screw tsa RTB tsa ho tšoarella fatše ebe o tlosa RTB ha motlakase o ntse o butse. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi. Etsa bonnete ba hore motlakase o tlositsoe pele o tsoela pele.
- Se ke oa hokela ka kotloloho moleng oa voltage. Mola oa voltage tlameha ho fanoa ke sefetoleli se ikhethileng, se lumelletsoeng se ikhethileng kapa phepelo ea motlakase e nang le matla a potoloho e khuts'oane e sa feteng 100 VA boholo kapa e lekanang.
- Ha e sebelisoa Sehlopheng sa I, Karolo ea 2, sebakeng se kotsi, thepa ena e tlameha ho kenngoa ka har'a sebaka se loketseng se nang le mokhoa o nepahetseng oa wiring o lumellanang le likhoutu tsa motlakase tse laolang.
Lisebelisoa tse Eketsehileng
| Mohlodi | Tlhaloso |
| Micro830, Micro850, le Micro870 Programmable Controllers Bukana ea Mosebelisi, khatiso 2080-UM002 | Tlhaloso e qaqileng haholoanyane ea mokhoa oa ho kenya le ho sebelisa li-control tsa hau tsa Micro830, Micro850, le Micro870. |
| Litaelo tsa ho kenyeletsoa ha "Bus Terminator" ea Micro800, khatiso ea 2085-IN002 | Tlhahisoleseding ea ho kenya module ea terminator ea libese. |
| Industrial Automation Wiring le Grounding Guidelines, khatiso 1770-4.1 | Lintlha tse ling mabapi le mekhoa e nepahetseng ea wiring le ho thea fatše. |
Fetileview
Katoloso ea Micro800™ I/O ke modular I/O e tlatsanang le ho holisa bokhoni ba Micro850® le Micro870® controller. Li-modules tsena tsa katoloso ea I/O le balaoli ba sebelisang boema-kepe ba katoloso ba I/O.
Module Overview
Pele view
Pele view
Le letona holimo view
2085-IF8, 2085-IF8K
Pele view
Le letona holimo view
Tlhaloso ea Mojule
| Tlhaloso | Tlhaloso | ||
| 1 | Mounting screw hole/ Ho kenya leoto | 4 | Latch ea khokahano ea module |
| 2 | Thibelo ea Removable Terminal Block (RTB) | 5 | DIN rail mounting latch |
| 3 | RTB tšoara li-screw | 6 | Letšoao la boemo ba I/O |
Sesebelisoa sena se na le maikutlo a ho tsoa ha electrostatic (ESD). Latela litataiso tsa thibelo ea ESD ha u tšoara thepa ena.Thaba ea Module
Bakeng sa tlhaiso-leseling e batsi mabapi le litataiso tse nepahetseng tsa motheo, bona Industrial Automation Wiring le Grounding
Tataiso, khatiso 1770-4.1.
Sebaka sa Mojule
Boloka sebaka ho tloha linthong tse kang mabota a kampetsoeng, likhoele, le lisebelisoa tse haufi. Dumella 50.8 mm (2 in.)
ea sebaka ka mahlakoreng 'ohle bakeng sa moea o lekaneng, joalo ka ha ho bonts'itsoe.
Mount Dimensions le DIN Rail Mounting
Bophahamo ba ho hloa ha bo kenyelle maoto a ho hloa kapa lilache tsa terene tsa DIN.
DIN Rail Mounting
Mojule o ka kenngoa ho sebelisoa liporo tse latelang tsa DIN: 35 x 7.5 x 1 mm (EN 50022 - 35 x 7.5).
Bakeng sa tikoloho e nang le ho thothomela ho hoholo le ho tšoenyeha ho hoholo, sebelisa mokhoa oa ho kenya liphanele, ho fapana le ho kenya seporo sa DIN.
Pele o kenya mojule seporong sa DIN, sebelisa screwdriver ea lehare le sephara ka har'a latch ea terene ea DIN ebe o e phunya ho ea tlase ho fihlela e le maemong a sa kengoang.
- Huka bokaholimo ba sebaka se holisang seporo sa DIN sa selaoli holim'a seporo sa DIN, ebe u tobetsa tlase ho fihlela molaoli a thula seporo sa DIN.
- Sutumelletsa latch ea seporo ea DIN morao sebakeng se hokeletsoeng.
Sebelisa liankora tsa ho qetela tsa terene tsa DIN (Allen-Bradley® karolo ea 1492-EA35 kapa 1492-EAHJ35) bakeng sa tikoloho ea ho thothomela kapa e tšosang.
Ho phahamisa Panel
Mokhoa o ratoang oa ho hlomamisa ke ho sebelisa M4 tse peli (#8) mojuleng ka mong. Ho mamella sebaka sa lesoba: ± 0.4 mm (0.016 in.).
Bakeng sa litekanyo tse ntseng li eketseha, bona Buka ea Mosebelisi ea Micro830®, Micro850, le Micro870 Programmable Controllers, khatiso 2080-UM002.
Latela mehato ena ho kenya mojule oa hau u sebelisa li-screws.
- Beha mojule haufi le molaoli khahlano le phanele moo o o hlomathisang teng. Etsa bonnete ba hore selaoli le mojule li arohane hantle.
- Tšoaea masoba a ho cheka ka likoti tse ntseng li eketseha le maoto a ntseng a phahama ebe o tlosa mojule.
- Qha likoti ho li-markings, ebe u fetola mojule ebe u o kenya. Tlohela sebaka sa litšila se sirelletsang sebakeng sa hau ho fihlela u qetile ho kenya mochine le lisebelisoa tse ling.
Kopano ea Tsamaiso
Mojule oa I/O oa katoloso ea Micro800 o hoketsoe ho molaoli kapa mojule o mong oa I/O ka ho hokahanya li-latches le lihoko, hammoho le sehokelo sa libese. Li-module tsa I / O tsa taolo le katoloso li tlameha ho emisa ka module ea 2085-ECR Bus Terminator. Etsa bonnete ba hore o notlela lilache tsa mojule oa khokahanyo ebe o tiisa li-screw tsa RTB pele o kenya motlakase mojulung.
Bakeng sa ho kenya mojule oa 2085-ECR, bona Litaelo tsa Tlhophiso ea Module oa Libese tsa Micro800, khatiso 2085-IN002.
Lihokelo tsa Wiring Field
Litsamaisong tsa taolo ea boemo bo tiileng, ho theola fatše le terata ho thusa ho fokotsa litlamorao tsa lerata ka lebaka la tšitiso ea motlakase (EMI).
Tlanya Module
E kenyelelitsoe le 2085-IF4, 2085-OF4, kapa 2085-OF4K module ea hau ke "12-pin Removable Terminal Blocks" (RTB). E kenyellelitsoe le mojule oa hau oa 2085-IF8 kapa 2085-IF8K ho na le li-RTB tse peli tsa 12-pin. Mehala ea motheo ea mojule oa hau e bontšitsoe ka tlase.
Motheo oa Wiring ho Module
2085-OF4, 2085-OF4K
2085-IF8, 2085-IF8K
Litlhaloso
Litlhaloso Kakaretso
| Tšobotsi | 2085-IF4 | 2085-OF4, 2085-OF4K | 2085-IF8, 2085-IF8K |
| Nomoro ea I/O | 4 | 8 | |
| Litekanyo HxWxD | 28 x 90 x 87 mm (1.1 x 3.54 x 3.42 ho.) | 44.5 x 90 x 87 mm (1.75 x 3.54 x 3.42 in.) | |
| Boima ba sekepe, hoo e ka bang. | 140 g (4.93 oz) | 200 g (7.05 oz) | 270 g (9.52 oz) |
| Tekanyo ea libese hajoale, max | 5V DC, 100 mA24V DC, 50 mA | 5V DC, 160 mA24V DC, 120 mA | 5V DC, 110 mA24V DC, 50 mA |
| Boholo ba terata | |||
| Sehlopha sa lithapo(1) | 2 - likoung tsa matšoao | ||
| Mofuta oa mohala | Sireletsa | ||
| Terminal screw torque | 0.5…0.6 N•m (4.4…5.3 lb•in)(2) | ||
| Ho felloa ke matla, kakaretso | 1.7 W | 3.7 W | 1.75 W |
| Reiti ea mofuta oa sebaka | Ha ho letho (mokhoa o bulehileng) | ||
| Matšoao a boemo | Pontšo e 1 ea bophelo bo botala 4 letšoao la phoso e khubelu | 1 sesupo sa bophelo bo botala | Pontšo e 1 ea bophelo bo botala 8 matšoao a phoso a khubelu |
| Ho itšehla thajana voltage | 50V (e tsoelang pele), Mofuta oa Insulation o Matlafalitsoeng, mocha ho tsamaiso. Mofuta o lekiloeng @ 720V DC bakeng sa 60 s | ||
| Khoutu ea mocheso ea Amerika Leboea | T4A | T5 | |
- Sebelisa tlhahisoleseding ena ea Sehlopha sa Conductor ho rera ho tsamaisa li-conductor. Sheba Industrial Automation Wiring le Grounding Guidelines, khatiso 1770-4.1.
- Li-screws tsa RTB li lokela ho tiisoa ka letsoho. Ha lia lokela ho tiisoa ho sebelisoa sesebelisoa sa motlakase.
Litlhaloso tsa ho Kena
| Tšobotsi | 2085-IF4 | 2085-IF8, 2085-IF8K |
| Palo ea lisebelisoa | 4 | 8 |
| Qeto MoqtagE Hajoale | 14 bits (13 bits plus sign bit)1.28 mV/cnt unipolar; 1.28 mV/cnt bipolar1.28 µA/cnt | |
| Sebopeho sa data | Ka ho le letšehali e nepahetse, 16 bit 2 s e tlatsana | |
| Mofuta oa phetoho | SAR | |
| Sekhahla sa ntlafatso | <2 ms ho kanale e laetsoeng ntle le ho hana 50 Hz/60 Hz, <8 ms bakeng sa kanale kaofela 8 ms ka 50 Hz/60 Hz ho hana | |
| Nako ea karabo ea mohato ho fihla ho 63% | 4 … | |
| Kena terminal ea hajoale, e ka hlophisoa ke mosebelisi | 4…20 mA (ea kamehla) 0…20 mA | |
| Keletso voltage terminal, e ka lokisoang ke mosebelisi | ±10V 0…10V | |
| Kenyelletso ea ho kenya | Moqtage terminal > 1 MΩ Terminal ea hona joale <100 Ω | |
| Ho nepahala ho felletseng | ±0.10% Sekala se Feletseng @ 25 °C | |
| Ho nepahala ho hoholeha ka mocheso | Moqtagterminal ea e - 0.00428 % Sekala se Feletseng/ °C Boemelo ba hajoale - 0.00407 % Sekala se Feletseng/ °C | |
Litlhaloso Tse Kenyelitsoeng (E Tsoela Pele)
| Tšobotsi | 2085-IF4 | 2085-IF8, 2085-IF8K |
| Ho hlokahala tlhophiso | Feme e lekanngoe. Ha ho tlhophiso ea bareki e tšehetsoeng. | |
| Keketseho, max | 30V e tsoelang pele kapa 32 mA e tsoelang pele, mocha o le mong ka nako. | |
| Tlhahlobo ea kanale | Ho feta le ka tlase ho sebaka kapa boemo ba potoloho e bulehileng ka ho tlaleha hanyane | |
Litlhaloso tsa Sephetho
| Tšobotsi | 2085-OF4, 2085-OF4K |
| Palo ea liphetho | 4 |
| Qeto MoqtagE Hajoale | likotoana tse 12 unipolar; li-bits tse 11 hammoho le letšoao la bipolar2.56 mV/cnt unipolar; 5.13 mV/cnt bipolar5.13 µA/cnt |
| Sebopeho sa data | Ka ho le letšehali e loketse, 16-bit 2 s tlatsetso |
| Nako ea karabo ea mohato ho fihla ho 63% | 2 ms |
| Sekhahla sa phetoho, max | 2 ms kanale ka 'ngoe |
| Terminal ea hona joale ea tlhahiso, e ka lokisoa | 0 mA tlhahiso ho fihlela module e hlophisoa 4…20 mA (default)0…20 mA |
| Sephetho voltage terminal, e ka lokisoang ke mosebelisi | ±10V 0…10V |
| Moroalo oa hona joale ka voltagtlhahiso ea e, max | 3 mA |
| Ho nepahala ho felletseng Moqtage terminal Terminal ea hajoale | 0.133% Sekala se Felletseng @ 25 °C kapa ho feta0.425 % Sekala se Felletseng @ 25 °C kapa ho feta |
| Ho nepahala ho hoholeha ka mocheso | Moqtagterminal ea e - 0.0045% Sekala se Feletseng/ °C Boemelo ba hajoale - 0.0069% Sekala se Feletseng/ °C |
| Mojaro o hanyetsanang le tlhahiso ea mA | 15…500 Ω @ 24V DC |
Litlhaloso tsa Tikoloho
| Tšobotsi | Boleng |
| Mocheso, ho sebetsa | IEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock):-20…+65 ° C (-4…+149 °F) |
| Mocheso, moea o potolohileng, max | 65 °C (149 °F) |
| Mocheso, ho se sebetse | IEC 60068-2-1 (Teko ea Ab, e sa Paketehang e sa Paketeng e batang),IEC 60068-2-2 (Teko ea Bb, Mocheso o omileng o sa Kentsoeng),IEC 60068-2-14 (Tlhahlobo ea Na, e sa Paketehang Nonoperating Thermal Shock):-40 +85 °C (-40…+185 °F) |
| Mongobo o amanang | IEC 60068-2-30 (Teko ea Db, e sa pakeloang Damp Mocheso): 5…95% e sa tsitsang |
| Ho thothomela | IEC 60068-2-6 (Tlhahlobo Fc, E sebetsa): 2 g @ 10…500 Hz |
| Ho tšoha, ho sebetsa | IEC 60068-2-27 (Teko Ea, Tšabo e sa Paketehang): 25 g |
| Ho tšoha, ho se sebetse | IEC 60068-2-27 (Teko Ea, Tšisinyeho e sa Pakangoang): 25 g - bakeng sa thaba ea terene ea DIN35 g - bakeng sa thaba ea phanele |
| Mesi | Tlhaloso: IEC 61000-6-4 |
| Tšireletso ea ESD | IEC 61000-4-2: 6 kV puisano e ntša 8 kV ho tsoa moeeng |
Litlhaloso tsa Tikoloho (E Tsoela Pele)
| Tšobotsi | Boleng |
| Tšireletso ea mahlaseli a RF | IEC 61000-4-3: 10V/m e nang le 1 kHz sine-wave 80% AM ho tloha 80…6000 MHz |
| Tšireletso ea EFT / B | IEC 61000-4-4: ± 2 kV @ 5 kHz boema-kepeng ba matšoao ± 2 kV @ 100 kHz likoung tsa matšoao |
| Ho itšireletsa mafung ka nakoana | IEC 61000-4-5: ± 1 kV line-line(DM) le ± 2 kV line-earth(CM) likoung tsa matšoao |
| Ho tsamaisoa ha RF ho itšireletsa mafung | IEC 61000-4-6: 10V rms e nang le 1 kHz sine-wave 80% AM ho tloha 150 kHz…80 MHz |
Setifikeiti
| Setifikeiti (ha sehlahisoa se tshwailwe)(1) | Boleng |
| c-UL-rona | Thepa ea UL e thathamisitsoeng ea Taolo ea Indasteri, e netefalitsoeng bakeng sa US le Canada. Sheba UL File E322657.UL E thathamisitsoe bakeng sa Sehlopha sa I, Sehlopha sa 2 Sehlopha sa A,B,C,D Libaka tse Kotsi, tse netefalitsoeng bakeng sa US le Canada. Sheba UL File E334470 |
| CE | European Union 2014/30/EU EMC Taelo, e tsamaellanang le: EN 61326-1; Meas./Control/Lab., Litlhoko tsa Indasteri EN 61000-6-2; Tšireletso ea indasteriEN 61000-6-4; Phatlalatso ea LiindasteriEN 61131-2; Balaoli ba Lenaneo (Sehlopha sa 8, Sebaka A & B) European Union 2011/65/EU RoHS, e lumellanang le: EN IEC 63000; Litokomane tsa tekheniki |
| Katoloso ea RCM | Molao oa li-radiocommunications oa Australia, o tsamaellanang le: EN 61000-6-4; Mesi ea Liindasteri |
| KC | Ngodiso ya Korea ya Thepa ya Kgaso le Dikgokahanyo, e tsamaellanang le: Article 58-2 of Radio Waves Act, Clause 3 |
| EAC | Russia Customs Union TR CU 020/2011 EMC Technical Regulation Russian Customs Union TR CU 004/2011 LV Technical Regulation |
| Morocco | Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
| UKCA | 2016 No. 1091 - Electromagnetic Compatibility Regulations 2016 No. 1101 - Lisebelisoa tsa Motlakase (Tshireletso) Regulations2012 No. 3032 - Thibelo ea Tšebeliso ea Lintho Tse Ling Tse Kotsi Melaong ea Motlakase le ea Elektronike |
Rockwell Automation Support
Sebelisa lisebelisoa tsena ho fumana lintlha tsa tšehetso.
| Setsi sa Tšehetso ea Theknoloji | Fumana thuso ea ho etsa livideo, Lipotso, puisano, liforamu tsa basebelisi, le lintlafatso tsa tsebiso mabapi le sehlahisoa. | rok.auto/support |
| Motheo oa tsebo | Fumana lingoloa tsa Knowledgebase. | rok.auto/knowledgebase |
| Linomoro tsa Mohala tsa Tšehetso ea Theknoloji ea Libaka | Fumana nomoro ea mohala ea naha ea heno. | rok.auto/phonesupport |
| Literature Library | Fumana litaelo tsa ho kenya, libuka, libukana, le lingoliloeng tsa boitsebiso ba theknoloji. | rok.auto/literature |
| Setsi sa Tšebelisano ea Sehlahisoa le ho Khoasolla (PCDC) | Khoasolla firmware, e amanang files (joalo ka AOP, EDS, le DTM), le ho fihlella lintlha tsa tokollo ea sehlahisoa. | rok.auto/pcdc |
Documentation Feedback
maikutlo a rona a re thusa ho sebeletsa litlhoko tsa litokomane tsa hau hamolemo. Haeba u na le litlhahiso mabapi le mokhoa oa ho ntlafatsa
litaba tsa rona, tlatsa foromo ho rok.auto/docfeedback.
Thepa ea Matla a Motlakase le Elektronike (WEEE)
Qetellong ea bophelo, lisebelisoa tsena li lokela ho bokelloa ka thoko ho litšila tse sa hlophisoang tsa masepala.
Rockwell Automation e boloka tlhaiso-leseling ea morao-rao ea tikoloho ea sehlahisoa ho eona websebaka ho rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Ikopanye le rona.
Ts'ehetso ea Bareki
Allen-Bradley, expanding human potential, FactoryTalk, Micro800, Micro830, Micro850, Micro870, Rockwell Automation, le TechConnect ke matshwao a kgwebo a Rockwell Automation, Inc. Matshwao a kgwebo ao e seng a Rockwell Automation ke thepa ya dikhamphani tse fapaneng.
Phatlalatso 2085-IN006E-EN-P - August 2022 | Supersedes Publication 2085-IN006D-EN-P - December 2019
Copyright © 2022 Rockwell Automation, Inc. Litokelo tsohle li sirelelitsoe. E hatisitsoe Singapore.
Litokomane / Lisebelisoa
 |
Allen-Bradley 2085-IF4 Micro800 4-Channel le 8-Channel Analog VoltagE-Current Input and Output Modules [pdf] Buka ea Taelo 2085-IF4, 2085-IF8, 2085-IF8K, 2085-OF4, 2085-OF4K, 2085-IF4 Micro800 4-Channel le 8-Channel Analog Vol.tagE-Current Input and Output Modules, 2085-IF4, Micro800 4-Channel le 8-Channel Analog Vol.tagE-Current Input and Output Modules, MoqtagE-Current Input and Output modules, Input and Output modules, Modules, Analog Vol.tagE-Current Input and Output Modules |
