Allen-Bradley 2085-IF4 Micro800 4-Channel da 8-Channel Analog Vol.tage-Input na yanzu da Manual Umarnin Modules na fitarwa
Takaitacciyar Canje-canje
Wannan ɗaba'ar ta ƙunshi sabbin ko sabunta bayanai masu zuwa. Wannan jeri ya ƙunshi ingantaccen sabuntawa kawai kuma ba a yi niyya don nuna duk canje-canje ba. Ba koyaushe ake samun nau'ikan da aka fassara don kowane bita ba.
| Taken | Shafi |
| Sabunta samfuri | Duka |
| Muhalli da aka sabunta | 2 |
| Sabunta Hankali | 3 |
| Ƙara Micro870 mai sarrafawa zuwa Overview | 4 |
| Sabunta Bayanan Muhalli | 9 |
| Takaddar da aka sabunta | 9 |
Muhalli da Kawaye
HANKALI: An yi nufin wannan kayan aikin don amfani da shi a cikin muhallin masana'antu na Digiri na 2 na gurɓataccen gurɓata, a cikin juzu'itage Aikace-aikacen Category II (kamar yadda aka bayyana a cikin EN/IEC 60664-1), a tsayi har zuwa 2000 m (6562 ft) ba tare da lalata ba. Wannan kayan aikin ba a yi niyya don amfani da shi a wuraren zama ba kuma maiyuwa ba zai ba da cikakkiyar kariya ga ayyukan sadarwar rediyo a cikin irin waɗannan wuraren ba. Ana ba da wannan kayan aikin azaman buɗaɗɗen kayan aiki don amfanin cikin gida. Dole ne a ɗora shi a cikin wani shingen da aka ƙera da kyau don waɗancan ƙayyadaddun yanayin muhalli waɗanda za su kasance kuma an tsara su yadda ya kamata don hana rauni na mutum wanda ke haifar da damar zuwa sassan rayuwa. Yakin dole ne ya kasance yana da kaddarorin da suka dace don hana ko rage yaɗuwar harshen wuta, tare da biyan ƙimar yaɗuwar harshen wuta na 5VA ko a yarda da aikace-aikacen idan ba ƙarfe ba. Dole ne a sami damar shiga ciki ta hanyar amfani da kayan aiki kawai. Sashe na gaba na wannan ɗaba'ar na iya ƙunsar ƙarin bayani game da takamaiman ƙididdiga nau'in shinge waɗanda ake buƙata don biyan wasu takaddun amincin samfur.
Baya ga wannan ɗaba'ar, duba waɗannan abubuwa:
- Ka'idojin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin
shigarwa bukatun. - NEMA Standard 250 da EN/IEC 60529, kamar yadda ya dace, don bayani game da matakan kariya da aka bayar ta hanyar shinge.
Hana Fitar Electrostatic
HANKALI: Wannan kayan aiki yana kula da fitarwa na lantarki, wanda zai iya haifar da lalacewa na ciki kuma ya shafi aiki na al'ada. Bi waɗannan jagororin lokacin da kuke sarrafa wannan kayan aiki:- Taɓa ƙasan abu don fitar da yuwuwar a tsaye.
- Saka madaidaicin wuyan hannu na ƙasa.
- Kar a taɓa masu haɗawa ko fil akan allunan abubuwan da suka shafi abubuwa.
- Kar a taɓa abubuwan da'ira a cikin kayan aiki.
- Yi amfani da madaidaicin wurin aiki, idan akwai.
- Ajiye kayan aiki a cikin marufi mai aminci a tsaye lokacin da ba a amfani da shi
Amincewa da Wuri Mai Haɗari na Arewacin Amurka
Bayanin mai zuwa yana aiki lokacin aiki da wannan kayan aiki a wurare masu haɗari:
Kayayyakin da aka yiwa alama "CL I, DIV 2, GP A, B, C, D" sun dace don amfani a cikin Rukunin Class I Division 2 A, B, C, D, Wurare masu haɗari da wurare marasa haɗari kawai. Ana ba da kowane samfur tare da alamomi akan farantin suna mai nuni da lambar yanayin zafin wuri mai haɗari. Lokacin haɗa samfura a cikin tsarin, ƙila a yi amfani da lambar mafi ƙarancin zafin jiki (lambar “T” mafi ƙasƙanci) don taimakawa ƙayyadaddun lambar yanayin yanayin gabaɗayan tsarin. Haɗin kayan aiki a cikin tsarin ku ana ƙarƙashin bincike daga Hukumar da ke da iko a lokacin shigarwa.
GARGADI: HAZARAR FASHEWA
- Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
Kar a cire haɗin haɗi zuwa wannan kayan aikin sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari. Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur. - Sauya abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
HANKALI
- An kafa wannan samfurin ta hanyar dogo na DIN zuwa ƙasan chassis. Yi amfani da titin DIN dogo mai chromatepassivated karfe don tabbatar da ƙasa mai kyau. Amfani da sauran kayan dogo na DIN (misaliample, aluminum ko robobi) wanda zai iya lalata, oxidize, ko kuma masu jagoranci mara kyau, na iya haifar da ƙasa mara kyau ko tsaka-tsaki. Amintaccen dogo na DIN zuwa saman hawa kusan kowane 200 mm (7.8 in.) kuma amfani da anka na ƙarshe daidai. Tabbatar da saukar da layin dogo DIN yadda ya kamata. Koma zuwa Waya Automation Automation na Masana'antu da Ka'idodin Grounding, Rockwell Automation 1770-4.1, don ƙarin bayani.
Don yin biyayya da hane-hane na UL, dole ne a yi amfani da wannan kayan aikin daga tushen da ya dace da masu zuwa: Class 2 ko Limited Vol.tage/Yanzu. - Don yin biyayya da CE Low Voltage Umarnin (LVD), duk I/O da aka haɗa dole ne a yi ƙarfi daga tushen da ya dace da masu zuwa: Tsaro Ƙarfin Ƙarfin Ƙarfafawatage (SELV) ko Kariyar Ƙarfin Ƙarƙashin Ƙarfafawatage (PELV).
- Rashin haɗa na'urar tasha bas zuwa ƙirar I/O na ƙarshe zai haifar da kuskuren mai sarrafawa.
- Kar a yi waya fiye da madugu biyu akan kowace tasha
GARGADI
- Lokacin da kuka haɗa ko cire haɗin Tashar Tashar Mai Cirewa (RTB) tare da amfani da ikon gefen filin, baka na lantarki na iya faruwa. Wannan na iya haifar da fashewa a cikin sakawa wuri mai haɗari. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
- Idan kun haɗa ko cire haɗin wayoyi yayin da wutar gefen filin ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
- Idan ka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Tsarin ba ya goyan bayan iyawar “Cire da Sakawa Ƙarƙashin ƙarfi” (RIUP). Kar a haɗa ko cire haɗin tsarin yayin da ake amfani da wutar lantarki. Tabbatar an cire wuta kafin a ci gaba.
- Kar a kwance skru na RTB kuma cire RTB yayin da wuta ke kunne. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Tabbatar cewa an cire iko kafin a ci gaba.
- Kar a haɗa kai tsaye zuwa layin voltage. Layi voltage dole ne a ba da shi ta hanyar mai dacewa, mai keɓance mai keɓancewa ko wutar lantarki mai gajeriyar ƙarfin da'ira ba ta wuce iyakar VA 100 ko daidai ba.
- Lokacin da aka yi amfani da shi a cikin Class I, Division 2, wuri mai haɗari, dole ne a ɗora wannan kayan aiki a cikin wani shinge mai dacewa tare da ingantacciyar hanyar wayoyi wanda ya dace da ka'idojin lantarki.
Ƙarin Albarkatu
| Albarkatu | Bayani |
| Micro830, Micro850, da Micro870 Masu Gudanar da Shirye-shiryen Mai Amfani, bugu 2080-UM002 | Cikakken bayanin yadda ake shigarwa da amfani da Micro830, Micro850, da Micro870 masu sarrafa shirye-shirye. |
| Umarnin Shigar Bus Terminator Micro800, bugawa 2085-IN002 | Bayani kan shigar da modul tasha bas. |
| Ka'idojin Waya Automation na Masana'antu, Buga 1770-4.1 | Ƙarin bayani game da ingantattun hanyoyin wayoyi da dabarun ƙasa. |
Ƙarsheview
Faɗin Micro800™ I/O shine I/O na yau da kullun wanda ya dace kuma yana ƙara ƙarfin Micro850® da Micro870® masu sarrafawa. Waɗannan ƙa'idodin I/O na haɓakawa tare da masu sarrafawa ta amfani da tashar fadada I/O.
Module Overview
Gaba view
Gaba view
Dama saman view
2085-IF8, 2085-IF8K
Gaba view
Dama saman view
Bayanin Module
| Bayani | Bayani | ||
| 1 | Hawan dunƙule rami / hawa ƙafa | 4 | Module haɗin haɗin haɗin gwiwa |
| 2 | Block Terminal Mai Cire (RTB) | 5 | DIN dogo hawa latch |
| 3 | RTB rike skru | 6 | Alamar I/O |
Wannan kayan aikin yana kula da fitarwar lantarki (ESD). Bi jagororin rigakafin ESD lokacin sarrafa wannan kayan aiki.Dutsen Module
Don ƙarin bayani kan ingantattun jagororin shimfida ƙasa, duba Waya da Grounding Masana'antu Automation
Jagora, bugawa 1770-4.1.
Tazarar Module
Kula da tazara daga abubuwa kamar bangon shinge, hanyoyin waya, da kayan aiki kusa. Bada 50.8 mm (2 in.)
na sarari a kowane bangare don isassun iskar shaka, kamar yadda aka nuna.
Matsakaicin Girma da DIN Rail Dutsen
Girman hawa baya haɗa da hawa ƙafafu ko latches na dogo na DIN.
DIN Rail Dutsen
Za'a iya shigar da tsarin ta amfani da hanyoyin DIN masu zuwa: 35 x 7.5 x 1 mm (EN 50022 - 35 x 7.5).
Don mahalli masu firgita da damuwa, yi amfani da hanyar hawan panel, maimakon hawan dogo na DIN.
Kafin hawa tsarin a kan dogo na DIN, yi amfani da screwdriver mai lebur a cikin latch ɗin dogo na DIN sannan a sa shi ƙasa har sai ya kasance a wurin da ba a kwance ba.
- Ƙiƙa saman yankin hawan dogo na DIN na mai sarrafawa akan layin dogo na DIN, sannan danna ƙasa har sai mai sarrafawa ya kama hanyar dogo na DIN.
- Matsa layin dogo na DIN baya zuwa wurin da aka makale.
Yi amfani da DIN dogo ƙarshen anchors (Lambar ɓangaren Allen-Bradley® 1492-EA35 ko 1492-EAHJ35) don yanayin girgiza ko girgiza.
Ruwa na Panel
Hanyar hawan da aka fi so ita ce a yi amfani da M4 (#8) biyu a kowane module. Haƙuri tazarar rami: ± 0.4 mm (0.016 in.).
Don girma girma, duba Micro830®, Micro850, da Micro870 Programmable Controllers User Manual, bugu 2080-UM002.
Bi waɗannan matakan don shigar da tsarin ku ta amfani da sukurori masu hawa.
- Sanya module ɗin kusa da mai sarrafawa akan panel ɗin da kake hawa shi. Tabbatar cewa mai sarrafawa da module suna sarari yadda ya kamata.
- Alama ramukan hakowa ta cikin ramukan da ake hawa sama da ƙafafu sannan a cire tsarin.
- Hana ramukan a alamomin, sa'an nan kuma maye gurbin tsarin kuma ku hau shi. Bar tarkacen tarkace a wurin har sai kun gama yin wayoyi da duk wasu na'urori.
Tsarin Tsarin
Micro800 fadada I/O module yana haɗe zuwa mai sarrafawa ko wani tsarin I/O ta hanyar haɗa latches da ƙugiya, da kuma mai haɗin bas. Dole ne mai sarrafawa da faɗaɗa I/O modules su ƙare tare da 2085-ECR Bus Terminator module. Tabbatar ku kulle latches na haɗin haɗin haɗin module ɗin kuma ƙara ƙara RTB ɗin sukurori kafin amfani da wutar lantarki.
Don shigarwa na 2085-ECR module, duba Micro800 Bus Terminator Module Installation Instructions, bugu 2085-IN002.
Haɗin Wiring Field
A cikin tsattsauran tsarin kula da ƙasa, yin ƙasa da layin waya yana taimakawa iyakance tasirin hayaniya saboda tsangwama na lantarki (EMI).
Waya Module
Haɗe tare da 2085-IF4, 2085-OF4, ko 2085-OF4K module ɗin ne guda 12-pin Tubalan Cire Tasha (RTB). Haɗe tare da 2085-IF8 ko 2085-IF8K module ɗin RTB ne mai 12-pin guda biyu. Ana nuna ainihin wayoyi na ƙirar ku a ƙasa.
Basic Waya zuwa Module
2085-OF4, 2085-OF4K
2085-IF8, 2085-IF8K
Ƙayyadaddun bayanai
Gabaɗaya Bayani
| Siffa | 2085-IF4 | 2085-OF4, 2085-OF4K | 2085-IF8, 2085-IF8K |
| Adadin I/O | 4 | 8 | |
| Girman HxWxD | 28 x 90 x 87 mm (1.1 x 3.54 x 3.42 a cikin.) | 44.5 x 90 x 87 mm (1.75 x 3.54 x 3.42 in.) | |
| Nauyin jigilar kaya, kimanin. | 140 g (4.93 oz) | 200 g (7.05 oz) | 270 g (9.52 oz) |
| Zane na bas na yanzu, max | 5V DC, 100mA24V DC, 50mA | 5V DC, 160mA24V DC, 120mA | 5V DC, 110mA24V DC, 50mA |
| Girman waya | |||
| Kashi na waya (1) | 2- akan tashoshin sigina | ||
| Nau'in waya | Garkuwa | ||
| Karfin jujjuyawar tasha | 0.5…0.6 N•m (4.4…5.3 lb•in)(2) | ||
| Rashin wutar lantarki, duka | 1.7 W | 3.7 W | 1.75 W |
| Ƙididdiga nau'in shinge | Babu (buɗaɗɗen salo) | ||
| Alamun matsayi | 1 kore lafiya nuna alama 4 ja kuskure nuna alama | 1 kore lafiya nuna alama | 1 kore lafiya nuna alama 8 ja kuskure Manuniya |
| Kadaici voltage | 50V (ci gaba), Nau'in Insulation Mai Ƙarfafa, tashar zuwa tsarin. Nau'in da aka gwada @ 720V DC don 60 s | ||
| Lambar yanayi ta Arewacin Amurka | T4A | T5 | |
- Yi amfani da wannan bayanin Rukunin Gudanarwa don tsara hanyar tafiyar jagora. Dubi Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1.
- RTB riƙon ƙasa yakamata a ɗaure su da hannu. Kada a tsaurara su ta amfani da kayan aikin wuta.
Ƙididdigar shigarwa
| Siffa | 2085-IF4 | 2085-IF8, 2085-IF8K |
| Yawan bayanai | 4 | 8 |
| Ƙaddamarwa Voltage Yanzu | 14 ragowa (13 ragowa da alamar bit) 1.28 mV/cnt unipolar; 1.28 mV/cnt bipolar1.28 µA/cnt | |
| Tsarin bayanai | Hagu barata, 16 bit 2 s cikawa | |
| Nau'in juyawa | SAR | |
| Ƙimar sabuntawa | <2 ms a kowace tashar da aka kunna ba tare da kin amincewa da 50 Hz/60 Hz ba, <8 ms ga duk tashar 8 ms tare da kin amincewar 50 Hz/60 Hz | |
| Lokacin amsa mataki har zuwa 63% | 4… 60 ms ba tare da kin amincewar 50Hz/60 Hz ba - ya dogara da adadin tashar da aka kunna da saitin tacewa 600 ms tare da kin amincewar 50 Hz/60 Hz | |
| Shigar da tashar ta yanzu, mai daidaita mai amfani | 4…20mA (tsoho) 0…20mA | |
| Shigar da kunditage tasha, mai daidaitawa mai amfani | ± 10V 0… 10V | |
| Input impedance | Voltage tasha > 1 MΩ Tasha na yanzu <100 Ω | |
| Cikakken daidaito | ± 0.10% Cikakken Sikeli @ 25 °C | |
| Daidaitacce tafiyar da zafi | Voltage m – 0.00428 % Cikakken Sikeli/°C Tasha na yanzu – 0.00407 % Cikakken Sikeli/°C | |
Ƙayyadaddun shigarwa (Ciga gaba)
| Siffa | 2085-IF4 | 2085-IF8, 2085-IF8K |
| Ana buƙatar daidaitawa | An daidaita masana'anta. Ba a goyan bayan daidaitawar abokin ciniki. | |
| Yi nauyi, max | 30V ci gaba ko 32mA ci gaba, tashoshi ɗaya a lokaci guda. | |
| Binciken tashar | Ƙarƙashin kewayo ko yanayin buɗewa ta hanyar rahoton bit | |
Ƙimar fitarwa
| Siffa | 2085-OF4, 2085-OF4K |
| Yawan abubuwan da aka fitar | 4 |
| Ƙaddamarwa Voltage Yanzu | 12 bits unipolar; 11 rago tare da alamar bipolar2.56 mV/cnt unipolar; 5.13 mV/cnt bipolar5.13 µA/cnt |
| Tsarin bayanai | Hagu barata, 16-bit 2 s cikawa |
| Lokacin amsa mataki har zuwa 63% | 2 ms |
| Adadin juyawa, max | 2 ms kowane tashoshi |
| Fitar tashar ta yanzu, mai daidaita mai amfani | 0 mA fitarwa har sai an daidaita tsarin 4…20 mA (tsoho) 0…20 mA |
| Fitarwa voltage tasha, mai daidaitawa mai amfani | ± 10V 0… 10V |
| lodi na yanzu akan voltage fitarwa, max | 3 mA |
| Cikakken daidaito Voltage Terminal Tashar ta yanzu | 0.133% Cikakken Sikeli @ 25 °C ko mafi kyau0.425 % Cikakken Sikeli @ 25 °C ko mafi kyau |
| Daidaitacce tafiyar da zafi | Voltage m – 0.0045% Cikakken Sikeli/°C Tasha na yanzu – 0.0069% Cikakken Sikeli/°C |
| Nauyin juriya akan fitarwa na mA | 15…500 Ω @ 24V DC |
Ƙayyadaddun Muhalli
| Siffa | Daraja |
| Zazzabi, aiki | IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Gwaji Bd, Mai aiki Busassun Heat), IEC 60068-2-14 (Gwajin Nb, Aiki Thermal Shock): C (-20…+65 °F) |
| Zazzabi, kewaye da iska, max | 65°C (149°F) |
| Zazzabi, mara aiki | IEC 60068-2-1 (Gwajin Ab, Ba a Kunshin Sanyi Ba), IEC 60068-2-2 (Gwajin Bb, Busassun Zafin da Ba a Buɗe), IEC 60068-2-14 +40°C (-85…+40°F) |
| Dangi zafi | IEC 60068-2-30 (Gwajin Db, Ba a kunshe Damp Zafi): 5…95% rashin kwanciyar hankali |
| Jijjiga | IEC 60068-2-6 (Gwajin Fc, Aiki): 2g @ 10… 500 Hz |
| Shock, aiki | IEC 60068-2-27 (Gwajin Ea, Shock Ba a Kunshe): 25g |
| Shock, rashin aiki | IEC 60068-2-27 (Gwajin Ea, Shock Ba a Kunshi): 25g - don Dutsen dogo na DIN 35 g - don Dutsen panel |
| Fitarwa | Saukewa: IEC61000-6-4 |
| ESD rigakafi | IEC 61000-4-2: 6 kV lamba yana fitar da fitar da iska 8 kV |
Ƙayyadaddun Muhalli (Ci gaba)
| Siffa | Daraja |
| Radiated RF rigakafi | IEC 61000-4-3: 10V/m tare da 1 kHz sine-wave 80% AM daga 80… 6000 MHz |
| EFT/B rigakafi | IEC 61000-4-4: ± 2 kV @ 5 kHz akan tashoshin sigina ± 2 kV @ 100 kHz akan tashoshin sigina |
| Rashin rigakafi na wucin gadi | IEC 61000-4-5: ± 1 kV layin-layi (DM) da ± 2 kV layin-duniya (CM) akan tashoshin sigina |
| An gudanar da rigakafin RF | IEC 61000-4-6: 10V rms tare da 1 kHz sine-wave 80% AM daga 150 kHz… 80 MHz |
Takaddun shaida
| Takaddun shaida (lokacin da samfurin ya kasance alama)(1) | Daraja |
| c-UL-mu | UL Jerin Kayan Kayan Aikin Masana'antu, wanda aka ba da izini ga Amurka da Kanada. Duba UL File E322657.UL An jera shi don Class I, Rukuni na 2 A, B,C, D wurare masu haɗari, ƙwararrun Amurka da Kanada. Duba UL File E334470 |
| CE | Umarnin EMC na Tarayyar Turai 2014/30/EU, mai dacewa da: EN 61326-1; Meas./Control/Lab., Bukatun masana'antu EN 61000-6-2; Immunity na Masana'antu EN 61000-6-4; Masana'antu EN 61131-2; Masu Gudanar da Shirye-shiryen (Sashe na 8, Yanki A & B) Tarayyar Turai 2011/65/EU RoHS, mai yarda da: EN IEC 63000; Takardun fasaha |
| RCAIM | Dokar Sadarwar Rediyon Australiya, mai dacewa da: EN 61000-6-4; Fitar masana'antu |
| KC | Rijistar Koriya na Kayan Watsa Labarai da Kayan Sadarwa, wanda ya dace da: Mataki na 58-2 na Dokar Waves Radio, Sashe na 3 |
| KOWANE | Ƙungiyar Kwastam ta Rasha TR CU 020/2011 EMC Dokokin Fasaha na Rasha TR CU 004/2011 LV Dokokin Fasaha |
| Maroko | Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
| UKCA | 2016 No. 1091 - Dokokin Daidaituwar Wutar Lantarki 2016 No. 1101 - Dokokin Kayan Wutar Lantarki (Tsaro)2012 No. 3032 - Ƙuntata Amfani da Wasu Abubuwa masu haɗari a cikin Dokokin Kayan Lantarki da Lantarki |
Tallafin Automation na Rockwell
Yi amfani da waɗannan albarkatun don samun damar bayanan tallafi.
| Cibiyar Taimakon Fasaha | Nemo taimako tare da yadda ake yin bidiyo, FAQs, taɗi, taron masu amfani, da sabunta sanarwar samfur. | rok.auto/support |
| Tushen ilimi | Samun damar labarai na tushen Ilimi. | rok.auto/knowledgebase |
| Lambobin Taimakon Fasaha na Gida | Nemo lambar tarho don ƙasar ku. | rok.auto/phonesupport |
| Laburaren Adabi | Nemo umarnin shigarwa, littattafai, ƙasidu, da wallafe-wallafen bayanan fasaha. | rok.auto/literature |
| Dacewar Samfura da Cibiyar Zazzagewa (PCDC) | Zazzage firmware, hade files (kamar AOP, EDS, da DTM), da samun damar bayanin bayanan sakin samfur. | rok.auto/pcdc |
Bayanin Takardu
Kalaman namu suna taimaka mana samar da buƙatun takardunku mafi kyau. Idan kuna da wasu shawarwari kan yadda ake ingantawa
Abubuwan da ke cikin mu, cika fom a rok.auto/docfeedback.
Waste Electric and Electronic Equipment (WEEE)
A ƙarshen rayuwa, ya kamata a tattara wannan kayan aiki daban daga duk wani sharar gida da ba a ware ba.
Rockwell Automation yana kula da bayanan yarda da muhalli na yanzu akan sa website a rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat: 6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Haɗa tare da mu.
Taimakon Masu Amfani
Allen-Bradley, faɗaɗa yuwuwar ɗan adam, FactoryTalk, Micro800, Micro830, Micro850, Micro870, Rockwell Automation, da TechConnect alamun kasuwanci ne na Rockwell Automation, Inc. Alamomin kasuwanci waɗanda ba na Rockwell Automation mallakin kamfanoninsu ne.
Buga 2085-IN006E-EN-P - Agusta 2022 | Bugawa na Supersedes 2085-IN006D-EN-P - Disamba 2019
Haƙƙin mallaka © 2022 Rockwell Automation, Inc. Duk haƙƙin mallaka. An buga a Singapore.
Takardu / Albarkatu
 |
Allen-Bradley 2085-IF4 Micro800 4-Channel da 8-Channel Analog Vol.tage-Input na yanzu da Modulolin fitarwa [pdf] Jagoran Jagora 2085-IF4, 2085-IF8, 2085-IF8K, 2085-OF4, 2085-OF4K, 2085-IF4 Micro800 4-Channel da 8-Channel Analog Vol.tage-Current Input and Output Modules, 2085-IF4, Micro800 4-Channel da 8-Channel Analog Vol.tage-Input na yanzu da Modulolin fitarwa, Voltage-Current Input and Output Modules, Input and Output Modules, Modules, Analog Vol.tage-Input na yanzu da Modulolin fitarwa |
