KEKETSO MOEKETSI
ZD-IN
TLHOKOMELO TS'ELE
Lentsoe TEMOSO le eteletsoeng pele ke letšoao 
e bontsha maemo kapa diketso tse behang polokeho ya mosebedisi kotsing.
Lentsoe ATTENTION le eteletsoeng pele ke letšoao e bontsha maemo kapa diketso tse ka senyang sesebediswa kapa thepa e hoketsweng. Tiisetso e tla fetoha lefeela le lefeela ha ho ka etsahala hore e sebelisoe hampe kapa tampho sebelisa module kapa lisebelisoa tse fanoeng ke moetsi ha ho hlokahala bakeng sa ts'ebetso ea eona e nepahetseng, le haeba litaelo tse bukeng ena li sa lateloe.
|
TLHOKOMELISO: Likahare tse felletseng tsa bukana ena li tlameha ho baloa pele ho ts'ebetso efe kapa efe. Mojule o tlameha ho sebelisoa feela ke litsebi tsa motlakase tse hloahloa. Litokomane tse khethehileng li fumaneha ka QR-CODE e bontšitsoeng leqepheng la 1. |
 |
Mojule o tlameha ho lokisoa le likarolo tse senyehileng li nkeloe sebaka ke Moetsi. Sehlahisoa se na le maikutlo a ho tsoa ha electrostatic. Nka mehato e nepahetseng nakong ea ts'ebetso efe kapa efe. |
 |
Ho lahloa ha litšila tsa motlakase le tsa elektroniki (ho sebetsa ho European Union le linaheng tse ling tse recycleng). Letšoao la sehlahisoa kapa sephutheloana sa sona le bontša hore sehlahisoa se tlameha ho neheloa setsing sa pokello se nang le tumello ea ho sebelisa litšila tsa motlakase le tsa elektroniki. |
THULA MODULE
LITŠOANTŠISO KA LESOTHO KA PELE PELE
| LED | BOEMO | Tlhaloso ea LED |
| PWR Green | ON | Sesebelisoa se tsamaisoa ka nepo |
| HLOKA mosehla | ON | Tloaelo kapa phoso |
| HLOKA mosehla | Ho benya | Tlhophiso e fosahetseng |
| RX Khubelu | ON | Tlhahlobo ea khokahano |
| RX Khubelu | Ho benya | Receipt ea pakete e phethiloe |
| TX Khubelu | Ho benya | Phetiso ea pakete e phethiloe |
LIEKETSENG MOKHOPO
| MATS'ELISO |  https://www.seneca.it/products/z-d-in/doc/CE_declaration |
| TS'ELISO |  |
| PHEPELO EA MOTLAKASE | Moqtage: 10 ÷ 40Vdc; 19 ÷ 28Vac; 50 ÷ 60Hz Monyetla: Ka tloaelo: 1.5W @ 24Vdc, Max: 2.5W |
| SEBELISA | E sebelisoa libakeng tse nang le tekanyo ea 2 ea tšilafalo. Setsi sa phepelo ea motlakase se tlameha ho ba sehlopheng sa 2. |
| MAEMO TIKOLO | Mocheso: -10÷ + 65°C Mongobo: 30% ÷ 90% ho 40°C e sa tsitsang. Altitude: Ho fihla ho 2,000 m ka holim'a bophahamo ba leoatle Mocheso oa polokelo: -20÷ + 85°C Tekanyo ea tšireletso: IP20. |
| KOPANO | IEC EN60715, 35mm DIN seporo sebakeng se otlolohileng. |
| MAKHOPO | Li-screw terminals tsa litsela tse 3 tse ntšitsoeng, bophahamo ba 5mm, karolo ea 2.5mm2 Sehokelo se ka morao IDC10 bakeng sa bara ea DIN 46277 |
| LITLHAKISO | |
| Mofuta oa tšehetso tse kentsoeng: |
Reed, Contatto, haufi le PNP, NPN (e nang le khanyetso ea kantle) |
| Likanale tse 'maloa: | 5 (4+ 1) e ikemetseng ka 16Vdc |
| Totalizer palo e kahodimodimo makhetlo a mangata |
100 Hz bakeng sa liteishene ho tloha ho 1 ho isa ho 5 10 kHz feela bakeng sa ho kenya 5 (kamora ho seta) |
| UL (Boemo bo TIMA) | 0 ÷ 10 Vdc, Ke <2mA |
| UH (boemo bo BUDITSE) | 12 ÷ 30 Vdc; Ke > 3mA |
| Monyetla oa hona joale | 3mA (bakeng sa tlhahiso ka 'ngoe e sebetsang) |
| Tshireletso | Ka ho sebelisa likhatello tsa TVS tsa nakoana tsa 600 W/ms. |
TLHOKOMELISO TSA LITLHAKISO TSA MOSEBETSI
| Li-switches tsohle tsa DIP | TLOA |
| Mekhahlelo ea puisano ea protocol ea Modbus: | 38400 8, N, 1 Aterese 1 |
| Phetoho ea boemo ba ho kenya: | KHOLOA |
| Sefe ea dijithale | 3ms |
| Totalizers | Ho balla ho ya ka keketseho |
| Channel 5 ho 10 kHz | E holofetse |
| Nako ea latency ea Modbus | 5ms |
Modbus MELAO YA KHOPO
- Kenya li-module ho terene ea DIN (120 max)
- Hokela li-module tse hole u sebelisa likhoele tsa bolelele bo loketseng. Tafole e latelang e bonts'a data ea bolelele ba cable:
- Bolelele ba libese: bolelele bo boholo ba marang-rang a Modbus ho latela sekhahla sa Baud. Bona ke bolelele ba likhoele tse hokahanyang li-module tse peli tse hole (sheba Setšoantšo sa 1).
- Bolelele ba ho tsoa: bolelele bo boholo ba ho tsoa ho 2 m (sheba setšoantšo sa 1).
Setšoantšo se Qanollang 1
| Bolelele ba bese | Bolelele ba ho tsoa |
| 1200 m | 2 m |
Bakeng sa ts'ebetso e phahameng, ho khothalletsoa ho sebelisa likhoele tse khethehileng tse sirelelitsoeng, joalo ka BELDEN 9841.
IDC10 MOKHOPI
Phepelo ea motlakase le sebopeho sa Modbus li fumaneha ho sebelisoa bese ea terene ea Seneca DIN, ka sehokelo sa morao sa IDC10, kapa sesebelisoa sa Z-PC-DINAL2-17.5.
Sehokelo sa Morao (IDC 10)
Moelelo oa likhokahano tse fapaneng sehokelong sa IDC10 o bontšoa setšoantšong haeba u lakatsa ho fana ka matšoao ka kotloloho ka sona.
SEBELISA TS'OANELO-LIPHETO
Boemo ba li-switches tsa DIP bo hlalosa mekhoa ea puisano ea Modbus ea module: Aterese le Baud Rate.
Tafole e latelang e bonts'a boleng ba Baud Rate le Aterese ho latela maemo a li-switches tsa DIP:
| DIP-Switch boemo | |||||
| SW1 POSITION | KHOTSO RATE |
SW1 POSITION | AKHESE | SEEMO | TEMINATOR |
| 1 2 3 4 5 6 7 8 | 3 4 5 6 7 8 | 10 | |||
| ————– |
9600 |  |
#1 | |
E holofetse |
| ———— |
19200 | |
#2 | |
E lumelletsoe |
| ———– |
38400 | ••••••• | #… | ||
| ———– |
57600 | |
#63 | ||
| ——- |
Ho tloha EEPROM |
|
Ho tloha EEPROM |
||
Hlokomela: Ha DIP e fapoha 3 ho isa ho 8 e TIMA, litlhophiso tsa puisano li nkuoa ho tsoa ho programming (EEPROM).
Hlokomela 2: Mohala oa RS485 o tlameha ho felisoa feela qetellong ea mohala oa puisano.
Litlhophiso tsa li-dip-switches li tlameha ho lumellana le litlhophiso tsa lirejisete.
Litlhaloso tsa lirekoto li fumaneha ho USER MANUAL.
LIKHOKELO MOTLATSI
Phepelo ea motlakase:
Meeli e ka holimo ha ea lokela ho fetisoa e le ho qoba tšenyo e kholo ea mojule.
Haeba mohloli oa phepelo ea motlakase o sa sireletsoa khahlanong le ho tlala, fuse ea polokeho e tlameha ho kenngoa mothapong oa phepelo ea motlakase ka boleng bo lekanang le seo boemo bo se hlokang.
Modbus RS485
Khokahano bakeng sa puisano ea RS485 e sebelisang sistimi e kholo ea MODBUS joalo ka mokhoa o mong ho feta bese ea Z-PC-DINx.
Ela hloko: Polarity ea khokahano ea RS485 ha e tloaelehe 'me lisebelisoa tse ling e ka khelosoa.
LITLHAKISO
LITLHAKISO TSA HO KENYA:
Litlhophiso tsa kamehla:
Kenyelletso #1: 0 – 100 Hz (16BIT)
Kenyelletso #2: 0 – 100 Hz (16BIT)
Kenyelletso #3: 0 – 100 Hz (16BIT)
Kenyelletso #4: 0 – 100 Hz (16BIT)
Kenyelletso #5: 0 – 100 Hz (16BIT)
Kenyelletso #5 e ka hlophisoa joalo ka kakaretso:
Kenyelletso #5: 0 – 10 kHz (32BIT)
TLHOKOMELO
Meeli e kaholimo ea phepelo ea motlakase ha ea tlameha ho fetisoa, kaha sena se ka baka tšenyo e kholo mojulung. Tima mojule pele o hokela lintho tse kenang le tse hlahisoang.
Ho fihlela litlhoko tsa ts'ireletso ea motlakase oa motlakase:
- sebelisa lithapo tsa lipontšo tse sirelelitsoeng;
- hokela thebe ho tsamaiso ea lefatše ea lisebelisoa tse khethehileng;
- fuse e nang le MAX. tekanyo ea 0,5 A e tlameha ho kenngoa haufi le mojule.
- arola likhoele tse sirelelitsoeng ho tse ling tse sebelisoang bakeng sa ho kenya motlakase (li-inverters, li-motor, lionto tsa induction, joalo-joalo ...).
- etsa bonnete ba hore mojule ha o fane ka matla a phepelotage phahameng ho feta e bontšitsoeng ka litlhaloso tsa tekheniki e le hore e se ke ea e senya.
SENECA srl; Via Austria, 26 - 35127 - PADOVA - ITALY;
Mohala +39.049.8705359 -
Fax +39.049.8706287
MOKHOA OA PUISANO
Tšehetso ea tekheniki
support@seneca.it
Lintlha tsa sehlahisoa
sales@seneca.it
Tokomane ena ke thepa ea SENECA srl. Likopi le tlhahiso e hanetsoeng ntle le tumello. Litaba tsa tokomane ena li lumellana le lihlahisoa le mahlale a hlalositsoeng. Lintlha tse boletsoeng li ka fetoloa kapa tsa tlatselletsoa molemong oa tekheniki le/kapa oa thekiso.
Litokomane / Lisebelisoa
 |
SENECA ZD-IN Digital Input or Output Modules [pdf] Buka ea Taelo ZD-IN, Digital Input kapa Output Modules, ZD-IN Digital Input kapa Output modules |
