Allen-Bradley 2085-IF4 Micro800 4-Channel thiab 8-Channel Analog Voltage-Tam sim no Input thiab Output Modules Phau Ntawv Qhia
Cov ntsiab lus ntawm Kev Hloov
Cov ntawv tshaj tawm no muaj cov ntaub ntawv tshiab lossis hloov tshiab hauv qab no. Daim ntawv teev npe no suav nrog cov hloov tshiab tseem ceeb nkaus xwb thiab tsis yog npaj los cuam tshuam tag nrho cov kev hloov pauv. Cov ntawv txhais lus tsis yog ib txwm muaj rau txhua qhov kev hloov kho.
| Ntsiab lus | Nplooj |
| Hloov tshiab template | Thoob plaws |
| Hloov Kho Ib puag ncig thiab Enclosure | 2 |
| Hloov Kho Cov Lus Qhia | 3 |
| Ntxiv Micro870 maub los rau Tshajview | 4 |
| Hloov tshiab Environmental Specifications | 9 |
| Hloov Kho Daim Ntawv Pov Thawj | 9 |
Environment and Enclosure
CEEB TOOM: Cov cuab yeej no yog tsim los siv rau hauv Pollution Degree 2 kev lag luam ib puag ncig, nyob rau hauv overvoltage Cov ntawv thov qeb II (raws li tau hais tseg hauv EN / IEC 60664-1), ntawm qhov siab txog li 2000 m (6562 ft) yam tsis muaj derating. Cov cuab yeej no tsis yog tsim los siv rau hauv thaj chaw nyob thiab yuav tsis muaj kev tiv thaiv txaus rau cov kev pabcuam hauv xov tooj cua hauv ib puag ncig zoo li no. Cov cuab yeej no tau muab los ua cov cuab yeej qhib rau kev siv sab hauv tsev. Nws yuav tsum tau muab tso rau hauv ib lub thawv uas tsim nyog rau cov xwm txheej ib puag ncig tshwj xeeb uas yuav muaj thiab tsim nyog tsim los tiv thaiv tus kheej raug mob los ntawm kev nkag mus rau qhov chaw nyob. Lub kaw lus yuav tsum muaj cov khoom siv hluav taws xob tsim nyog los tiv thaiv lossis txo qis kev sib kis ntawm cov nplaim taws, ua raws li qhov ntsuas hluav taws xob ntawm 5VA lossis raug pom zoo rau daim ntawv thov yog nonmetallic. Sab hauv ntawm lub qhov rooj yuav tsum nkag tau tsuas yog los ntawm kev siv lub cuab yeej. Cov ntu tom ntej ntawm qhov kev tshaj tawm no tuaj yeem muaj cov ntaub ntawv ntau ntxiv txog cov kev ntsuas tshwj xeeb uas yuav tsum tau ua raws li qee yam khoom pov thawj kev nyab xeeb.
Ntxiv rau qhov kev tshaj tawm no, saib cov hauv qab no:
- Industrial Automation Wiring and Grounding Guidelines, luam tawm 1770-4.1, kom paub ntxiv
kev xav tau ntawm installation. - NEMA Standard 250 thiab EN / IEC 60529, raws li muaj feem xyuam, rau kev piav qhia txog qib kev tiv thaiv muab los ntawm cov ntaub thaiv npog.
Tiv thaiv Electrostatic Discharge
CEEB TOOM: Cov cuab yeej no yog rhiab heev rau electrostatic paug, uas tuaj yeem ua rau muaj kev puas tsuaj sab hauv thiab cuam tshuam rau kev ua haujlwm ib txwm muaj. Ua raws li cov lus qhia no thaum koj ua cov cuab yeej no:- Kov ib qho khoom siv hauv av kom tso tawm qhov zoo li qub.
- Hnav ib qho kev pom zoo grounding wriststrap.
- Tsis txhob kov cov connectors lossis pins ntawm cov khoom vaj huam sib luag.
- Tsis txhob kov cov khoom siv hluav taws xob hauv cov khoom siv.
- Siv lub chaw ua haujlwm zoo li qub, yog tias muaj.
- Khaws cov khoom siv rau hauv cov ntim khoom zoo li qub thaum tsis siv
North American Hazardous Location Pom zoo
Cov ntaub ntawv hauv qab no siv tau thaum siv cov cuab yeej no hauv qhov chaw muaj kev phom sij:
Cov khoom uas cim "CL I, DIV 2, GP A, B, C, D" yog tsim rau siv nyob rau hauv Chav Kawm I Division 2 Pawg A, B, C, D, Chaw Teeb Meem thiab qhov chaw tsis muaj kev phom sij nkaus xwb. Txhua yam khoom yog muab nrog cov cim rau ntawm daim ntawv ntsuam xyuas lub npe uas qhia txog qhov xwm txheej kub ntxhov qhov chaw. Thaum sib txuas cov khoom nyob rau hauv ib qho system, feem ntau qhov tsis zoo kub code (tsawg "T" tus lej) yuav raug siv los pab txiav txim siab tag nrho cov ntsuas kub ntawm lub cev. Kev sib xyaw ntawm cov khoom siv hauv koj lub cev yuav raug tshawb xyuas los ntawm Lub Chaw Haujlwm Hauv Zos Muaj Kev Txiav Txim Siab thaum lub sijhawm teeb tsa.
CEEB TOOM: EXPLOSION HAZARD
- Tsis txhob txiav cov cuab yeej tshwj tsis yog tias lub hwj chim tau raug tshem tawm lossis qhov chaw paub tias tsis muaj kev phom sij.
Tsis txhob txiav kev sib txuas rau cov cuab yeej no tshwj tsis yog tias lub hwj chim tau raug tshem tawm lossis thaj chaw paub tias tsis muaj kev phom sij. Ruaj ntseg ib qho kev sib txuas sab nraud uas ua phooj ywg rau cov cuab yeej no los ntawm kev siv cov ntsia hlau, zawv zawg latches, threaded connectors, los yog lwm yam uas muab nrog cov khoom no. - Kev hloov ntawm cov khoom tuaj yeem ua rau tsis zoo rau Chav Kawm I, Division 2.
CEEB TOOM
- Cov khoom no yog grounded los ntawm DIN rail rau chassis hauv av. Siv zinc-plated chromatepassivated steel DIN rail kom paub tseeb tias muaj av zoo. Kev siv lwm cov ntaub ntawv DIN rail (rau example, aluminium los yog yas) uas tuaj yeem corrode, oxidize, los yog cov neeg ua haujlwm tsis zoo, tuaj yeem ua rau tsis raug lossis tsis sib xws. Ruaj ntseg DIN rail rau mounting nto kwv yees li ntawm txhua txhua 200 hli (7.8 nyob rau hauv.) thiab siv kawg anchors tsim nyog. Nco ntsoov ua kom av DIN rail kom zoo. Xa mus rau Industrial Automation Wiring and Grounding Guidelines, Rockwell Automation publication 1770-4.1, yog xav paub ntxiv.
Txhawm rau ua raws li UL txwv, cov cuab yeej no yuav tsum tau siv los ntawm qhov chaw ua raws li cov hauv qab no: Chav Kawm 2 lossis Limited Voltage/Tam sim no. - Ua raws li CE Low Voltage Cov Lus Qhia (LVD), txhua qhov txuas I / O yuav tsum tau siv los ntawm qhov chaw ua raws li cov hauv qab no: Kev Nyab Xeeb Ntxiv Tsawg Voltage (SELV) lossis Tiv Thaiv Ntxiv Tsawg Voltage (PEV).
- Tsis txuas lub tsheb npav terminator module mus rau qhov kawg expansion I/O module yuav ua rau ib tug maub los nyuaj txhaum.
- Tsis txhob xaim ntau tshaj 2 conductors ntawm txhua lub davhlau ya nyob twg
CEEB TOOM
- Thaum koj txuas lossis txiav tawm qhov Tshem Tawm Terminal Block (RTB) nrog lub zog sab nraud siv, qhov hluav taws xob arc tuaj yeem tshwm sim. Qhov no tuaj yeem ua rau tawg hauv qhov chaw muaj kev phom sij. Nco ntsoov tias lub hwj chim raug tshem tawm lossis thaj chaw tsis muaj kev phom sij ua ntej yuav mus.
- Yog tias koj txuas lossis txiav cov xaim hluav taws xob thaum lub zog hluav taws xob sab nraud qhib, lub zog hluav taws xob tuaj yeem tshwm sim. Qhov no tuaj yeem ua rau muaj kev tawg hauv qhov chaw muaj kev phom sij. Nco ntsoov tias lub hwj chim raug tshem tawm lossis thaj chaw tsis muaj kev phom sij ua ntej yuav mus.
- Yog tias koj ntxig lossis tshem tawm lub module thaum lub zog rov qab qhib, qhov hluav taws xob arc tuaj yeem tshwm sim. Qhov no tuaj yeem ua rau muaj kev tawg hauv qhov chaw muaj kev phom sij. Lub module tsis txhawb nqa "Kev Tshem Tawm thiab Ntxig Hauv Lub Hwj Chim" (RIUP) muaj peev xwm. Tsis txhob txuas lossis txiav lub module thaum siv fais fab. Nco ntsoov tias lub hwj chim raug tshem tawm ua ntej yuav mus.
- Tsis txhob rub lub RTB tuav cov ntsia hlau thiab tshem RTB thaum lub hwj chim qhib. Qhov no tuaj yeem ua rau muaj kev tawg hauv qhov chaw muaj kev phom sij. Nco ntsoov tias lub hwj chim raug tshem tawm ua ntej yuav mus.
- Tsis txhob txuas ncaj qha rau kab voltage. Kab voltage yuav tsum tau muab los ntawm qhov tsim nyog, pom zoo cais tawm transformer lossis lub zog hluav taws xob uas muaj peev xwm luv luv tsis tshaj 100 VA siab tshaj lossis sib npaug.
- Thaum siv nyob rau hauv chav kawm I, Division 2, qhov chaw muaj kev phom sij, cov cuab yeej no yuav tsum tau muab tso rau hauv ib lub thawv uas tsim nyog nrog txoj kev xaim kom zoo uas ua raws li cov cai tswj xyuas hluav taws xob.
Cov peev txheej ntxiv
| Cov peev txheej | Kev piav qhia |
| Micro830, Micro850, thiab Micro870 Programmable Controllers User Manual, luam tawm 2080-UM002 | Cov lus piav qhia ntxaws ntxiv txog yuav ua li cas rau nruab thiab siv koj li Micro830, Micro850, thiab Micro870 programmable controllers. |
| Micro800 Bus Terminator Installation Instructions, luam tawm 2085-IN002 | Cov lus qhia txog kev txhim kho lub tsheb npav terminator module. |
| Industrial Automation Wiring thiab Grounding Guidelines, luam tawm 1770-4.1 | Xav paub ntau ntxiv txog kev xaim thiab kev siv hauv av kom raug. |
Tshajview
Micro800 ™ nthuav dav I / O yog ib qho qauv I / O uas ntxiv thiab txuas ntxiv peev xwm ntawm Micro850® thiab Micro870® controllers. Cov expansion I/O modules interface nrog controllers siv ib qho I/O expansion chaw nres nkoj.
Module Tshajview
Pem hauv ntej view
Pem hauv ntej view
Sab saum toj view
2085-IB, 8-IF2085K
Pem hauv ntej view
Sab saum toj view
Module Description
| Kev piav qhia | Kev piav qhia | ||
| 1 | Mounting ntsia hlau qhov / mounting ko taw | 4 | Module interconnect latch |
| 2 | Tshem Tawm Terminal Block (RTB) | 5 | DIN rail mounting latch |
| 3 | RTB tuav cov ntsia hlau | 6 | I/O status indicator |
Cov cuab yeej no muaj kev nkag siab rau electrostatic paug (ESD). Ua raws li cov lus qhia tiv thaiv ESD thaum tuav cov cuab yeej no.Mount lub Module
Yog xav paub ntxiv txog cov lus qhia hauv av kom raug, saib Industrial Automation Wiring and Grounding
Cov Lus Qhia, luam tawm 1770-4.1.
Module Spacing
Khaws qhov sib nrug ntawm cov khoom xws li cov phab ntsa thaiv, cov xov hlau, thiab cov khoom siv nyob ib sab. 50.8 hli (2 nti)
ntawm qhov chaw ntawm txhua sab kom txaus qhov cua, raws li qhia.
Mounting Dimensions thiab DIN Rail Mounting
Mounting qhov ntev tsis suav nrog mounting taw lossis DIN rail latches.
DIN Rail Mounting
Lub module tuaj yeem ntsia tau siv DIN rails hauv qab no: 35 x 7.5 x 1 mm (EN 50022 - 35 x 7.5).
Rau ib puag ncig uas muaj kev vibration ntau dua thiab kev txhawj xeeb poob siab, siv lub vaj huam sib luag mounting txoj kev, tsis yog DIN rail mounting.
Ua ntej mounting lub module ntawm ib tug DIN rail, siv lub tiaj tus ntsia hlau ntsia hlau nyob rau hauv lub DIN rail latch thiab rub nws downwards kom txog thaum nws nyob rau hauv lub unlatched txoj hauj lwm.
- Hook rau sab saum toj ntawm DIN rail mounting cheeb tsam ntawm tus maub los mus rau DIN rail, thiab ces nias rau hauv qab kom txog thaum tus maub los snaps rau DIN rail.
- Thawb lub DIN rail latch rov qab rau hauv txoj hauj lwm latched.
Siv DIN rail kawg thauj tog rau nkoj (Allen-Bradley® ntu naj npawb 1492-EA35 lossis 1492-EAHJ35) rau kev co lossis kev poob siab.
Vaj Huam Sib Luag Mounting
Txoj kev nyiam mounting yog siv ob M4 (#8) ib qho module. Qhov sib nrug ntev: ± 0.4 hli (0.016 nyob rau hauv.).
Rau mounting qhov ntev, saib Micro830®, Micro850, thiab Micro870 Programmable Controllers User Manual, luam tawm 2080-UM002.
Ua raws li cov kauj ruam no rau nruab koj lub module siv mounting screws.
- Muab lub module nyob ib sab ntawm tus maub los tiv thaiv lub vaj huam sib luag uas koj tab tom txhim kho. Xyuas kom tseeb tias tus maub los thiab module yog spaced kom zoo.
- Kos qhov drilling qhov los ntawm mounting ntsia hlau qhov thiab mounting taw ces tshem tawm cov module.
- Laum lub qhov ntawm cov cim, ces hloov lub module thiab mount nws. Cia cov khib nyiab pov tseg nyob rau hauv qhov chaw kom txog thaum koj ua tiav kev xaim lub module thiab lwm yam khoom siv.
Qhov System Assembly
Micro800 nthuav dav I / O module txuas nrog rau cov maub los lossis lwm qhov I / O module los ntawm kev sib txuas cov latches thiab hooks, nrog rau lub tsheb npav txuas. Cov maub los thiab nthuav dav I / O modules yuav tsum txiav nrog 2085-ECR Bus Terminator module. Nco ntsoov kaw lub module interconnect latches thiab nruj RTB tuav cov ntsia hlau ua ntej siv lub zog rau lub module.
Rau kev teeb tsa ntawm 2085-ECR module, saib Micro800 Bus Terminator Module Installation Instructions, luam tawm 2085-IN002.
Field Wiring Connections
Hauv cov txheej txheem tswj hwm hauv lub xeev, kev siv hauv av thiab xaim xaim pab txo qhov cuam tshuam ntawm lub suab nrov vim muaj kev cuam tshuam electromagnetic (EMI).
Hlau Module
suav nrog koj 2085-IF4, 2085-OF4, lossis 2085-OF4K module yog ib qho 12-pin Tshem Tawm Terminal Blocks (RTB). suav nrog koj 2085-IF8 lossis 2085-IF8K module yog ob 12-pin RTB. Cov kab hluav taws xob yooj yim ntawm koj lub module yog qhia hauv qab no.
Basic Wiring mus rau Module
2085-OF4, 2085-TSO 4K
2085-IB, 8-IF2085K
Specifications
General Specifications
| Yam ntxwv | 2085-IB 4 | 2085-OF4, XIV 2085-4 K | 2085-IB, 8-IF2085K |
| Tus lej I/O | 4 | 8 | |
| Dimensions HxWxD | 28 x 90 x 87 hli (1.1 x 3.54 x 3.42 in.) | 44.5 x 90 x 87 mm (1.75 x 3.54 x 3.42 po) | |
| Shipping nyhav, approx. | 140 g (4.93 ooj) | 200 g (7.05 ooj) | 270 g (9.52 ooj) |
| Bus tam sim no kos, max | 5V DC, 100 mA 24V DC, 50 mA | 5V DC, 160 mA 24V DC, 120 mA | 5V DC, 110 mA 24V DC, 50 mA |
| Hlau loj | |||
| Cov kab mob (1) | 2 - ntawm lub teeb liab ports | ||
| Hom hlau | Tiv thaiv | ||
| Terminal ntsia hlau torque | 0.5–0.6 N•m (4.4–5.3 lb•in)(2) | ||
| Lub zog dissipation, tag nrho | 1.7 W | 3.7 W | 1.75 W |
| Enclosure type rating | Tsis muaj (qhib-style) | ||
| Cov xwm txheej ntsuas | 1 Green Health indicator 4 red error indicator | 1 Green Health indicator | 1 Green Health indicator 8 red error indicators |
| Rho tawm voltage | 50V (nruam), Cov Khoom Siv Hluav Taws Xob Hluav Taws Xob, channel rau qhov system. Hom kuaj @ 720V DC rau 60 s | ||
| North American temp code | t4 ua | T5 | |
- Siv cov ntaub ntawv qhia txog Tus Cwj Pwm no rau kev npaj tus neeg xyuas pib. Saib Industrial Automation Wiring thiab Grounding Guidelines, luam tawm 1770-4.1.
- RTB tuav cov ntsia hlau yuav tsum nruj ntawm tes. Lawv yuav tsum tsis txhob nruj siv lub tshuab fais fab.
Input Specifications
| Yam ntxwv | 2085-IB 4 | 2085-IB, 8-IF2085K |
| Tus naj npawb ntawm inputs | 4 | 8 |
| Kev daws teeb meem Voltage Tamsis no | 14 khoom (13 khoom ntxiv rau kos npe me ntsis) 1.28 mV / cnt unipolar; 1.28 mV / cnt bipolar 1.28 µA / cnt | |
| Cov ntaub ntawv hom | Sab laug justified, 16 ntsis 2 s ntxiv | |
| Hom kev hloov pauv | SAR | |
| Hloov tshiab tus nqi | <2 ms rau ib qho channel uas tsis muaj 50 Hz / 60 Hz tsis lees paub, <8 ms rau tag nrho cov channel 8 ms nrog 50 Hz / 60 Hz tsis lees paub | |
| Kauj ruam teb lub sij hawm mus txog 63% | 4… 60 ms yam tsis muaj 50Hz / 60 Hz tsis lees txais - nyob ntawm tus naj npawb ntawm cov channel qhib thiab lim teeb 600 ms nrog 50 Hz / 60 Hz tsis lees paub | |
| Input tam sim no davhlau ya nyob twg, neeg siv configurable | 4…20 mA (default) 0 mA | |
| Cov lus qhia voltage davhlau ya nyob twg, neeg siv configurable | ± 10V 0… 10V | |
| Input impedance | Voltage davhlau ya nyob twg> 1 MΩ tam sim no davhlau ya nyob twg <100 Ω | |
| Qhov tseeb tiag | ± 0.10% Tag Nrho Scale @ 25 ° C | |
| Qhov tseeb drift nrog temp | Voltage davhlau ya nyob twg – 0.00428 % Tag Nrho Scale/°C Tam sim no davhlau ya nyob twg – 0.00407 % Tag Nrho Scale/°C | |
Input Specifications (Txuas ntxiv)
| Yam ntxwv | 2085-IB 4 | 2085-IB, 8-IF2085K |
| Calibration yuav tsum tau | Factory calibrated. Tsis muaj cov neeg siv khoom calibration txhawb. | |
| Overload, max | 30V nruam lossis 32 mA txuas ntxiv, ib channel ib zaug. | |
| Channel diagnostics | Tshaj thiab nyob rau hauv ntau lossis qhib Circuit Court mob los ntawm kev qhia me ntsis | |
Output Specifications
| Yam ntxwv | 2085-OF4, 2085-TSO 4K |
| Tus naj npawb ntawm cov zis | 4 |
| Kev daws teeb meem Voltage Tamsis no | 12 ntsis unipolar; 11 khoom ntxiv rau kos npe bipolar2.56 mV / cnt unipolar; 5.13 mV/cnt bipolar 5.13 µA/cnt |
| Cov ntaub ntawv hom | Sab laug justified, 16-ntsis 2 s ntxiv |
| Kauj ruam teb lub sij hawm mus txog 63% | 2ms ib |
| Hloov pauv tus nqi, max | 2ms ib channel |
| Output tam sim no davhlau ya nyob twg, neeg siv configurable | 0 mA tso zis kom txog thaum module teeb tsa 4…20 mA (default) 0… 20 mA |
| Tso zis voltage davhlau ya nyob twg, neeg siv configurable | ± 10V 0… 10V |
| Tam sim no load ntawm voltage tso zis, max | 3 mA |
| Qhov tseeb tiag Voltage terminal Tam sim no terminal | 0.133% Tag Nrho Scale @ 25 ° C lossis zoo dua 0.425% Tag Nrho Scale @ 25 ° C lossis zoo dua |
| Qhov tseeb drift nrog temp | Voltage davhlau ya nyob twg – 0.0045% Tag Nrho Scale/°C Tam sim no davhlau ya nyob twg – 0.0069% Tag Nrho Scale/°C |
| Resistive load ntawm mA tso zis | 15…500 Ω @ 24V DC |
Environmental Specifications
| Yam ntxwv | Tus nqi |
| Kub, ua haujlwm | IEC 60068-2-1 (Test Ad, Kev Ua Haujlwm Txias), IEC 60068-2-2 (Test Bd, Ua Haujlwm Kub Kub), IEC 60068-2-14 (Test Nb, Kev Ua Haujlwm Thermal Shock): -20… + 65 ° C (-4… + 149 ° F) |
| Kub, ib puag ncig huab cua, max | 65 ° C (149 ° F) |
| Kub, tsis ua haujlwm | IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock): -40... +85 ° C (-40 ... + 185 ° F) |
| txheeb ze humidity | IEC 60068-2-30 (Test Db, Unpackaged Damp Thaum tshav kub kub): 5…95% noncondensing |
| Kev vibration | IEC 60068-2-6 (Test Fc, Ua Haujlwm): 2g @ 10…500 Hz |
| Kev poob siab, kev ua haujlwm | IEC 60068-2-27 (Test Ea, Unpackaged Shock): 25 g |
| Kev poob siab, tsis ua haujlwm | IEC 60068-2-27 (Test Ea, Unpackaged Shock): 25 g - rau DIN rail mount 35 g - rau vaj huam sib luag mount |
| Cov pa tawm | IEC 61000-6-4: Cov |
| Kev tiv thaiv ESD | IEC 61000-4-2: 6 kV kev tiv thaiv tawm 8 kV cua tawm |
Environmental Specifications (Txuas ntxiv)
| Yam ntxwv | Tus nqi |
| Radiated RF tiv thaiv | IEC 61000-4-3: 10V / m nrog 1 kHz sine-wave 80% AM los ntawm 80…6000 MHz |
| Kev tiv thaiv EFT/B | IEC 61000-4-4: ± 2 kV @ 5 kHz ntawm cov teeb liab ports ± 2 kV @ 100 kHz ntawm cov teeb liab ports |
| Surge transient tiv thaiv | IEC 61000-4-5: ± 1 kV kab-kab (DM) thiab ± 2 kV kab-lub ntiaj teb (CM) ntawm cov teeb liab ports |
| Ua RF tiv thaiv | IEC 61000-4-6: 10V rms nrog 1 kHz sine-yoj 80% AM los ntawm 150 kHz… 80 MHz |
Cov ntawv pov thawj
| Daim ntawv pov thawj (thaum cov khoom yog cim)(1) | Tus nqi |
| c-UL- mus | UL Listed Industrial Control Equipment, tau ntawv pov thawj rau Asmeskas thiab Canada. Saib UL File E322657.UL Sau npe rau Chav Kawm I, Division 2 Pab Pawg A, B, C, D Cov Chaw Muaj Teeb Meem, tau lees paub rau Asmeskas thiab Canada. Saib UL File E334470 |
| CE | European Union 2014/30 / EU EMC Cov Lus Qhia, ua raws li: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial ImmunityEN 61000-6-4; Industrial EmissionsEN 61131-2; Programmable Controllers (Clause 8, Zone A & B) European Union 2011/65/EU RoHS, ua raws li: EN IEC 63000; Cov ntaub ntawv technical |
| RCM | Australian Radiocommunications Act, ua raws li: EN 61000-6-4; Muaj Emissions |
| KC | Kaus Lim Kauslim Kev Sau Npe ntawm Cov Khoom Siv Tshaj Tawm thiab Kev Sib Txuas Lus, ua raws li: Tshooj 58-2 ntawm Txoj Cai Xov Tooj Cua, Nqe 3 |
| EAC | Lavxias teb sab Customs Union TR CU 020/2011 EMC Technical Regulation Russian Customs Union TR CU 004/2011 LV Technical Regulation |
| Morocco | Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
| UKCA | 2016 No. 1091 – Electromagnetic Compatibility Regulations 2016 No. 1101 – Electrical Equipment (Safety) Regulations 2012 No. 3032 – Kev txwv tsis pub siv tej yam tshuaj muaj kev phom sij hauv hluav taws xob thiab khoom siv hluav taws xob |
Kev them nyiaj yug Rockwell Automation
Siv cov peev txheej no los saib xyuas cov ntaub ntawv txhawb nqa.
| Lub Chaw Pab Txhawb | Nrhiav kev pab nrog cov yeeb yaj kiab yuav ua li cas, FAQs, sib tham, cov neeg siv khoom sib tham, thiab cov khoom ceeb toom hloov tshiab. | rok.auto/support |
| Kev paub | Nkag mus rau Knowledgebase cov lus. | rok.auto/knowledgebase |
| Local Technical Support Xov tooj | Nrhiav tus lej xov tooj rau koj lub tebchaws. | rok.auto/phonesupport |
| Literature Library | Nrhiav cov lus qhia kev teeb tsa, phau ntawv qhia, daim ntawv qhia, thiab cov ntaub ntawv tshaj tawm. | rok.auto/literature |
| Product Compatibility thiab Download Center (PCDC) | Download tau firmware, txuam files (xws li AOP, EDS, thiab DTM), thiab nkag mus rau cov ntawv tso tawm cov khoom. | rok.auto/pcdc ib |
Cov ntaub ntawv tawm tswv yim
peb cov lus pab peb pab koj cov ntaub ntawv xav tau zoo dua. Yog tias koj muaj lus nug txog kev txhim kho
peb cov ntsiab lus, ua kom tiav daim ntawv ntawm rok.auto/docfeedback.
Cov Khoom Siv Hluav Taws Xob thiab Hluav Taws Xob Hluav Taws Xob (WEEE)
Thaum kawg ntawm lub neej, cov cuab yeej no yuav tsum tau muab cais tawm ntawm cov khoom pov tseg uas tsis muaj nyob hauv nroog.
Rockwell Automation tuav cov khoom tam sim no ib puag ncig kev ua raws cov ntaub ntawv ntawm nws website ntawm rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat: 6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Txuas nrog peb.
Kev Txhawb Nqi
Allen-Bradley, nthuav dav tib neeg muaj peev xwm, FactoryTalk, Micro800, Micro830, Micro850, Micro870, Rockwell Automation, thiab TechConnect yog cov cim lag luam ntawm Rockwell Automation, Inc. Cov cim lag luam tsis koom nrog Rockwell Automation yog cov cuab yeej ntawm lawv cov tuam txhab.
Tshaj tawm 2085-IN006E-EN-P – Lub Yim Hli 2022 | Supersedes Kev Tshaj Tawm 2085-IN006D-EN-P - Kaum Ob Hlis 2019
Copyright © 2022 Rockwell Automation, Inc. All rights reserved. Luam tawm hauv Singapore.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Allen-Bradley 2085-IF4 Micro800 4-Channel thiab 8-Channel Analog Voltage-Tam sim no Input thiab Output Modules [ua pdf] Phau ntawv qhia 2085-IF4, 2085-IF8, 2085-IF8K, 2085-OF4, 2085-OF4K, 2085-IF4 Micro800 4-Channel thiab 8-Channel Analog Voltage-Tam sim no Input thiab Output Modules, 2085-IF4, Micro800 4-Channel thiab 8-Channel Analog Voltage-Tam sim no Input thiab Output Modules, Voltage-Tam sim no Input thiab Output Modules, Input thiab Output Modules, Modules, Analog Voltage-Tam sim no Input thiab Output Modules |
