UNITRONICS®
IO-LINK
Cov neeg siv phau ntawv qhia
UG_ULK-1616P-M2P6
(IO-Link HUB, 16I/O, PN, M12, IP67)
1. Nqe lus piav qhia
1.1 Daim ntawv cog lus
Cov ntsiab lus hauv qab no / cov ntawv luv luv yog siv los ua ib qho ntawm cov ntaub ntawv no:
IOL: IO-Link.
LSB: tsawg kawg me ntsis.
MSB: qhov tseem ceeb tshaj me ntsis.
Cov cuab yeej no: sib npaug rau "cov khoom no", yog hais txog cov qauv khoom lossis series tau piav qhia hauv phau ntawv no.
1.2 Lub Hom Phiaj
Phau ntawv no muaj tag nrho cov ntaub ntawv xav tau los siv lub cuab yeej kom raug, suav nrog cov ntaub ntawv ntawm kev ua haujlwm tsim nyog, kev ua haujlwm, kev siv, thiab lwm yam. Nws yog tsim rau ob qho tib si rau programmers thiab kuaj / debugging cov neeg ua haujlwm uas debug lub kaw lus lawv tus kheej thiab cuam tshuam nrog lwm cov units (automation systems. , lwm yam programming li), nrog rau cov kev pabcuam thiab kev saib xyuas cov neeg ua haujlwm uas txhim kho txuas ntxiv lossis ua txhaum / yuam kev tsom xam.
Thov nyeem phau ntawv no ua tib zoo ua ntej txhim kho cov cuab yeej no thiab muab tso rau hauv kev ua haujlwm.
Phau ntawv no muaj cov lus qhia thiab sau ntawv los pab koj ua ib kauj ruam dhau los ntawm kev teeb tsa thiab kev ua haujlwm. Qhov no ua kom tsis muaj teeb meem. kev siv cov khoom. Los ntawm kev paub koj tus kheej nrog phau ntawv no, koj yuav tau txais.
Cov txiaj ntsig hauv qab no:
- xyuas kom muaj kev nyab xeeb ntawm cov cuab yeej no.
- qib advantage ntawm tag nrho cov peev txheej ntawm cov cuab yeej no.
- zam kev ua yuam kev thiab kev ua tsis tiav.
- txo kev txij nkawm thiab zam cov nqi pov tseg.
1.3 Siv tau Scope
Cov lus piav qhia hauv daim ntawv no siv tau rau IO-Link device module khoom ntawm ULKEIP series.
1.4 Kev Tshaj Tawm Txog Kev Ua Raws Cai
Cov khoom no tau tsim thiab tsim ua raws li European qauv thiab cov txheej txheem (CE, ROHS).
Koj tuaj yeem tau txais cov ntawv pov thawj ntawm kev ua raws li cov chaw tsim khoom lossis koj tus neeg muag khoom hauv zos.
2. Cov lus qhia kev nyab xeeb
2.1 Cov cim kev nyab xeeb
Ua tib zoo nyeem cov lus qhia no thiab tshuaj xyuas cov cuab yeej ua ntej sim teeb tsa, ua haujlwm, kho, lossis tswj nws. Cov lus tshwj xeeb hauv qab no tuaj yeem tshwm sim thoob plaws hauv daim ntawv no lossis ntawm cov khoom siv los qhia cov ntaub ntawv xwm txheej lossis ceeb toom txog kev phom sij.
Peb faib cov ntaub ntawv hais txog kev nyab xeeb ua plaub theem: "Danger", "Warning", "Actention", thiab "Notice".
| DANGER | qhia tias muaj xwm txheej txaus ntshai heev uas, yog tias tsis zam, yuav ua rau tuag lossis raug mob hnyav. |
| CEEB TOOM | qhia tias muaj xwm txheej txaus ntshai uas, yog tias tsis zam, tuaj yeem ua rau tuag lossis raug mob hnyav. |
| CEEB TOOM | qhia txog qhov xwm txheej txaus ntshai uas, yog tias tsis zam, tuaj yeem ua rau raug mob me lossis nruab nrab. |
| CEEB TOOM | siv los qhia cov ntaub ntawv tsis hais txog kev raug mob ntawm tus kheej |
Qhov no yog lub cim DANGER, uas qhia tias muaj hluav taws xob txaus ntshai uas, yog tias tsis ua raws li cov lus qhia, yuav ua rau tus kheej raug mob.
Qhov no yog lub cim ceeb toom, uas qhia tias muaj hluav taws xob muaj teeb meem uas, yog tias tsis ua raws li cov lus qhia, tuaj yeem ua rau tus kheej raug mob.
Qhov no yog lub cim "Attention". Siv los ceeb toom koj txog kev raug mob ntawm tus kheej. Ua raws li tag nrho cov lus qhia kev nyab xeeb raws li lub cim no kom tsis txhob raug mob lossis tuag.
Qhov no yog lub cim "Daim Ntawv Ceeb Toom", uas yog siv los ceeb toom rau cov neeg siv ntawm kev pheej hmoo. Kev ua tsis tau raws li txoj cai no yuav ua rau muaj teeb meem ntawm cov khoom siv.
2.2 Kev Nyab Xeeb Kev Nyab Xeeb
Cov cuab yeej no tsuas yog yuav tsum tau nruab, ua haujlwm, pabcuam thiab tswj xyuas los ntawm cov neeg ua haujlwm tsim nyog. Tus neeg tsim nyog yog ib tus neeg muaj kev txawj ntse thiab kev paub txog kev tsim kho thiab kev ua haujlwm ntawm cov khoom siv hluav taws xob, thiab nws cov kev teeb tsa, thiab tau txais kev cob qhia kev nyab xeeb kom paub txog thiab zam cov kev phom sij cuam tshuam.
Yuav tsum muaj cov lus qhia hauv cov lus qhia tias yog cov cuab yeej siv tsis tau teev tseg los ntawm cov chaw tsim khoom, kev tiv thaiv los ntawm cov khoom siv yuav raug puas tsuaj.
Cov neeg siv kev hloov kho thiab / lossis kev kho yog qhov txaus ntshai thiab yuav ua rau tsis muaj kev lees paub thiab tso tawm cov chaw tsim khoom los ntawm kev lav phib xaub.
Kev saib xyuas cov khoom tuaj yeem ua los ntawm peb cov neeg ua haujlwm nkaus xwb. Kev qhib tsis tau tso cai thiab kev pabcuam tsis raug ntawm cov khoom tuaj yeem ua rau muaj kev puas tsuaj ntau ntawm cov cuab yeej lossis ua rau tus kheej raug mob rau tus neeg siv.
Nyob rau hauv qhov kev tshwm sim ntawm ib tug loj malfunction, txiav siv cov khoom siv. Tiv thaiv kev ua haujlwm tsis raug ntawm lub cuab yeej. Yog xav tau kev kho, thov xa rov qab lub cuab yeej rau koj tus neeg sawv cev hauv zos lossis chaw muag khoom.
Nws yog lub tuam txhab ua haujlwm lub luag haujlwm ua raws li cov cai tswj kev nyab xeeb hauv zos.
Khaws cov khoom siv tsis siv nyob rau hauv nws qhov qub ntim. Qhov no muab kev tiv thaiv zoo tshaj plaws tiv thaiv kev cuam tshuam thiab ya raws rau lub cuab yeej. Thov xyuas kom meej tias cov xwm txheej ambient ua raws li cov cai no.
2.3 Kev Nyab Xeeb Tshwj Xeeb
Cov txheej txheem pib hauv ib qho kev tswj tsis tau yuav ua rau muaj kev phom sij lossis raug rau lwm yam khoom siv, yog li ntawd, ua ntej ua haujlwm, xyuas kom meej tias kev siv cov cuab yeej tsis cuam tshuam txog kev pheej hmoo uas yuav ua rau muaj kev phom sij rau lwm yam khoom siv lossis raug cuam tshuam los ntawm lwm yam khoom siv phom sij.
Fais fab mov
Cov cuab yeej no tsuas yog ua haujlwm nrog qhov tam sim no ntawm lub zog tsawg, uas yog, lub zog hluav taws xob yuav tsum muaj overvoltage thiab overcurrent tiv thaiv ua haujlwm.
Txhawm rau tiv thaiv lub zog tsis ua haujlwm ntawm cov cuab yeej no, cuam tshuam rau kev nyab xeeb ntawm lwm yam khoom siv; los yog tsis ua hauj lwm ntawm cov khoom siv sab nraud, cuam tshuam rau kev nyab xeeb ntawm cov khoom siv no.
3. Khoom Tshajview
IO-Txuas tus tswv tsim kev sib txuas ntawm IO-Link ntaus ntawv thiab cov txheej txheem automation. Raws li ib feem tseem ceeb ntawm I / O system, IO-Link master chaw nres tsheb yog nruab rau hauv lub txee tswj, lossis ncaj qha ntsia ntawm qhov chaw raws li qhov chaw taws teeb I / O, thiab nws qib encapsulation yog IP65/67.
- Tsim los rau kev lag luam ib puag ncig, nws yog ib qho kev siv rau cov kab automated.
- Compact qauv, haum rau kev siv scenarios nrog txwv installation tej yam kev mob.
- IP67 qib kev tiv thaiv siab, tiv thaiv kev cuam tshuam tsim, tsim nyog rau kev thov ib puag ncig kev thov.
Raws li kev ceeb toom tshwj xeeb, qhov ntsuas IP tsis yog ib feem ntawm daim ntawv pov thawj UL.
4. Technical Parameters
4.1 ULK-1616P-M2P6
4.1.1 ULK-1616P-M2P6 Specification
Cov kev qhia tshwj xeeb ntawm ULK-1616P-M2P6 yog raws li hauv qab no:
|
Basic Parameters |
Full Series |
| Khoom siv tsev |
PA6 + GF |
| Xim tsev |
Dub |
| Qib tiv thaiv |
IP67, Epoxy puv potting |
| Dimensions (VV x H x D) |
155mmx53mmx28.7mm |
| Qhov hnyav |
217 g |
| Ua haujlwm kub |
-25 ° C .. 70 ° C |
| Cia Kub |
-40 ° C… 85 ° C |
| Kev khiav dej num |
5%…95% |
| Cia Humidity |
5%…95% |
| Kev Ua Haujlwm Siab Ntawm Cov Cua |
80KPa…106KPa |
| Cia Atmospheric Siab |
80KPa…106KPa |
| Tightening Torque I / O) |
M12: 0.5 Nm |
| Daim ntawv thov ib puag ncig: |
Ua raws li EN-61131 |
| Kev Ntsuas Qhov Siv |
Ua raws li IEC 60068-2 |
| Impact Test |
Ua raws li IEC 60068-27 |
| Free Drop Test |
Ua raws li IEC 60068-32 |
| EMC |
Ua raws li IEC61000 -4-2,-3,-4 |
| Daim ntawv pov thawj |
CE, RoHS |
| Mounting Qhov Loj |
4.3mm x 4 |
| Qauv | ULK-1616P-M2P6 |
| IOLINK Parameters | |
| IO-LINK Device | |
| Cov Ntaub Ntawv Ntev | 2 bytes input / 2 bytes tso zis |
| Yam tsawg kawg lub sij hawm | |
| Fais fab Parameters | |
| Nyob Voltage | |
| Tag nrho UI tam sim no | <1.6A |
| Total Current UO | <2.5A |
| Chaw nres nkoj Parameter (input) | |
| Input Port Postion | j1..j 8 |
| Input Port Number | mus 16 |
| PNP | |
| Cov tswv yim teeb liab | 3-xaim PNP sensor lossis 2-xaim passive teeb liab |
| Input Signal “0” | Qib qis 0-5V |
| Output Signal "1" | Siab siab 11-30V |
| Hloov qhov pib | EN 61131-2 Hom 1/3 |
| Hloov zaus | 250hz ua |
| Input Delay | 20 mus |
| Tshaj Tawm Tam Sim No | 200 mA |
| I/O kev sib txuas | M12 Spin Poj Niam A coded |
| Chaw nres nkoj Parameter (tso zis) | |
| Output Port Postion | j1..j 8 |
| Output Port Number | mus 16 |
| Tso zis polarity | PNP |
| Tso zis Voltage | 24V (UA) |
| Tso zis tam sim no | 500 mA |
| Tso zis Diagnostic Hom | taw tes kuaj mob |
| Synchronization Factory | 1 |
| Hloov zaus | 250hz ua |
| Load Hom | Resistive, Pilot Duty, lungsten |
| Kev tiv thaiv luv luv | yog |
| Kev tiv thaiv overload | yog |
| I/O kev sib txuas | M12 Spin Poj Niam A coded |
4.1.2 ULK-1616P-M2P6 Series LED Txhais
ULK-1616P-M2P6 LED yog qhia hauv daim duab hauv qab no.
- IO-LINK LED
Ntsuab: Tsis muaj kev sib txuas lus
Ntsuab flashing: kev sib txuas lus yog ib txwm
Liab: kev sib txuas lus poob - PWR LED
Ntsuab: module fais fab mov yog qhov qub
Yellow: Cov khoom siv hluav taws xob sib txuas (UA) tsis txuas (rau modules nrog cov khoom tso tawm)
Tawm: Module fais fab tsis txuas - I/O LED teeb
Ntsuab: channel teeb liab yog qhov qub
Liab: Muaj cov zis thaum qhov chaw nres nkoj luv-circuited / overloaded / tsis muaj UA fais fab
- LEDA
- LEDB
| xwm txheej | Kev daws | |
| PWR | Ntsuab: Fais fab OK | |
| Yellow: no UA power | Xyuas seb puas muaj +24V ntawm tus pin 2 | |
| Tawm: Lub module tsis muaj zog | Txheeb xyuas cov kab hluav taws xob | |
| LINK | Ntsuab: Tsis muaj kev sib txuas lus | Txheeb xyuas qhov kev teeb tsa ntawm cov modules hauv PLC |
| Ntsuab flashing: txuas yog ib txwm, cov ntaub ntawv kev sib txuas lus yog ib txwm | ||
| Tawm: Txuas tsis tau tsim | Xyuas cov kab | |
| Liab: Kev sib txuas lus nrog tus tswv chaw nres tsheb cuam tshuam | Txheeb xyuas qhov xwm txheej ntawm qhov chaw nres tsheb tus tswv / view kab txuas | |
| IO | Ntsuab: channel teeb liab yog qhov qub | |
| Liab: Muaj cov zis thaum qhov chaw nres nkoj shortcircuited / overloaded / tsis muaj UA fais fab | Xyuas seb qhov thaiv puas raug / ntsuas UA voltage/PLC program |
Nco tseg: Thaum qhov ntsuas qhov txuas ib txwm tawm, yog tias tsis muaj qhov txawv txav hauv kev kuaj xyuas cable thiab hloov lwm cov qauv, nws qhia tau tias cov khoom ua haujlwm txawv txav.
Thov hu rau cov chaw tsim khoom rau kev sib tham.
4.1.3 ULK-1616P-M2P6 Dimension
Qhov loj ntawm ULK-1616P-M2P6 yog 155mm × 53mm × 28.7mm, suav nrog 4 qhov txuas ntawm Φ4.3mm, thiab qhov tob ntawm qhov mounting yog 10mm, raws li qhia hauv daim duab hauv qab no:
5. Kev teeb tsa khoom
5.1 Kev Nyab Xeeb Ua Ntej
Txhawm rau tiv thaiv cov khoom ua haujlwm tsis zoo, ua haujlwm tsis zoo, lossis cuam tshuam tsis zoo rau kev ua haujlwm thiab khoom siv, thov saib cov khoom hauv qab no.
5.1.1 Installation Site
Thov zam kev txhim kho nyob ze nrog cov khoom siv hluav taws xob siab (heaters, transformers, loj-muaj peev xwm resistors, thiab lwm yam)
Thov zam kev txhim kho nws nyob ze cov khoom siv nrog kev cuam tshuam loj ntawm electromagnetic (cov motors loj, transformers, transceivers, zaus converters, hloov cov khoom siv fais fab, thiab lwm yam).
Cov khoom no siv PN kev sib txuas lus.
Xov tooj cua nthwv dej (suab nrov) generated. los ntawm transceivers, motors, inverters, switching fais fab mov, thiab lwm yam yuav cuam tshuam rau kev sib txuas lus ntawm cov khoom thiab lwm yam modules.
Thaum cov khoom siv no nyob ib puag ncig, nws yuav cuam tshuam rau kev sib txuas lus ntawm cov khoom thiab cov module lossis ua rau cov khoom siv sab hauv ntawm lub module puas.
Thaum siv cov khoom no nyob ze cov cuab yeej no, thov paub meej tias cov teebmeem ua ntej siv.
Thaum ntau lub modules raug ntsia ze rau ib leeg, lub neej kev pab cuam ntawm modules yuav luv luv vim tsis muaj peev xwm mus dissipate tshav kub.
Thov khaws ntau tshaj 20mm ntawm cov modules.
5.1.2 Daim ntawv thov
Tsis txhob siv lub zog AC. Txwv tsis pub, muaj kev pheej hmoo ntawm kev tawg, cuam tshuam rau kev nyab xeeb ntawm tus kheej thiab khoom siv.
Thov zam txim tsis raug. Txwv tsis pub, muaj kev pheej hmoo ntawm rupture thiab burnout. Nws yuav cuam tshuam rau kev nyab xeeb ntawm tus kheej thiab khoom siv.
5.1.3 Kev siv
Tsis txhob khoov lub cable hauv ib lub vojvoog ntawm 40mm. Txwv tsis pub muaj kev pheej hmoo ntawm kev sib txuas.
Yog tias koj xav tias cov khoom no txawv txav, thov tsis txhob siv tam sim ntawd thiab tiv tauj lub tuam txhab tom qab txiav tawm lub hwj chim.
5.2 Kho vajtse Interface
5.2.1 ULK-1616P-M2P6 Interface Txhais
Fais fab Port Txhais
1. ULK-1616P-M2P6 Fais fab chaw nres nkoj txhais
Lub hwj chim chaw nres nkoj siv 5-pin connector, thiab cov pins tau txhais raws li hauv qab no:
| Fais fab Port Pin txhais | |||
|
Chaw nres nkoj M12 Poj Niam & Txiv Neej Pin Lo Lus Qhia |
Hom kev sib txuas | M12, 5 pins, A-code Txiv neej |
Txiv neej
|
| Tso cai Input Voltage | 18… 30 VDC (type.24VDC) | ||
| Qhov siab tshaj tam sim no | 1A | ||
| Static Ua Haujlwm Tam sim no lc | s80mA ua | ||
| Fais fab rov qab polarity tiv thaiv | yog | ||
| Tightening Torque (chaw nres nkoj fais fab) | M12: 0.5 Nm | ||
| raws tu qauv | IOLINK | ||
| Hloov ceev | 38.4 kbit / s (COM2) ceev | ||
| Yam tsawg kawg lub sij hawm | 55ms ib | ||
2. IO Link Port Pin txhais
IO-Txuas chaw nres nkoj siv 5-pin connector, thiab cov pins tau txhais raws li hauv qab no:
I/O Port Pin Txhais
|
Chaw nres nkoj M12 A-code Poj niam |
Pin Lo Lus Qhia |
||
 |
|||
|
Input (Nyob rau hauv / Output) |
Tso zis |
||
|
PNP |
PNP |
||
|
|
||
|
Chaw Nyob Distribution |
|||||
|
(-R) |
|||||
|
Byte |
1 | 0 | Byte | 1 | 0 |
| Bit0 | J1p4 | J5p4 | Bit0 | J1p4 |
J5p4 |
|
Bit1 |
J1p2 | J5p2 | Bit1 | J1p2 | J5p2 |
| Bit2 | J2p4 | J6p4 | Bit2 | J2p4 |
J6p4 |
|
Bit3 |
J2p2 | J6p2 | Bit3 | J2p2 | J6p2 |
| Bit4 | J3p4 | J7p4 | Bit4 | J3p4 |
J7p4 |
|
Bit5 |
J3p2 | J7p2 | Bit5 | J3p2 | J7p2 |
| Bit6 | J4p4 | J8p4 | Bit6 | J4p4 |
J8p4 |
|
Bit7 |
J4p2 | J8p2 | Bit7 | J4p2 |
J8p2 |
Pin 5 (FE) txuas nrog hauv av phaj ntawm lub module. Yog hais tias lub shielding txheej ntawm cov kev sib txuas kub sensor yuav tsum tau grounded, thov txuas tus pin 5 mus rau lub shielding txheej thiab av lub grounding phaj ntawm lub module.
5.2.2 ULK-1616P-M2P6 Daim duab kab hlau rhuav
1. Tso zis tawm
J1 ~ J8 (DI-PNP)
2. Tso zis tawm
J1 ~ J8 (DI-PNP)
3. Input/Output Signal (self-adaptive)
J1 ~ J8 (DIO-PNP)
5.2.3 ULK-1616P-M2P6 IO Chaw Nyob Chaw Nyob Cov Lus Teb
1. Cov Qauv: ULK-1616P-M2P6
|
Byte |
0 | Byte |
1 |
| Kuv 0.0/Q0.0 | J5p4 | Kuv 1.0/Q1.0 |
J1p4 |
|
Kuv 0.1/Q0.1 |
J5p2 | Kuv 1.1/Q1.1 | J1p2 |
| Kuv 0.2/Q0.2 | J6p4 | Kuv 1.2/Q1.2 |
J2p4 |
|
Kuv 0.3/Q0.3 |
J6p2 | Kuv 1.3/Q1.3 | J2p2 |
| Kuv 0.4/Q0.4 | J7p4 | Kuv 1.4/Q1.4 |
J3p4 |
|
Kuv 0.5/Q0.5 |
J7p2 | Kuv 1.5/Q1.5 | J3p2 |
| Kuv 0.6/Q0.6 | J8p4 | Kuv 1.6/Q1.6 |
J4p4 |
|
Kuv 0.7/Q0.7 |
J8p2 | Kuv 1.7/Q1.7 |
J4p2 |
Cov ntaub ntawv hauv daim ntawv no qhia txog cov khoom ntawm hnub luam ntawv. Unitronics muaj txoj cai, raws li tag nrho cov kev cai lij choj siv, txhua lub sijhawm, ntawm nws qhov kev txiav txim siab ib leeg, thiab tsis muaj ntawv ceeb toom, txiav tawm lossis hloov cov yam ntxwv, tsim, cov khoom siv thiab lwm yam tshwj xeeb ntawm nws cov khoom, thiab tshem tawm mus tas li lossis ib ntus. lub forgoing los ntawm kev ua lag luam.
Tag nrho cov ntaub ntawv hauv daim ntawv no yog muab "raws li yog" yam tsis muaj kev lav phib xaub ntawm txhua yam, qhia lossis hais, suav nrog tab sis tsis txwv rau ib qho kev lees paub ntawm kev ua lag luam, kev nyab xeeb rau ib lub hom phiaj, lossis tsis ua txhaum cai. Unitronics xav tias tsis muaj lub luag haujlwm rau qhov ua yuam kev lossis kev ua tsis tiav hauv cov ntaub ntawv qhia hauv daim ntawv no. Tsis muaj ib qho xwm txheej twg Unitronics yuav tsum lav rau ib qho tshwj xeeb, xwm txheej, tsis ncaj los yog qhov kev puas tsuaj ntawm txhua yam, lossis kev puas tsuaj txhua yam tshwm sim los ntawm kev siv lossis kev ua haujlwm ntawm cov ntaub ntawv no.
Cov npe lag luam, cov cim lag luam, logos thiab cov cim kev pabcuam tau nthuav tawm hauv daim ntawv no, suav nrog lawv cov qauv tsim, yog cov cuab yeej ntawm Unitronics (1989) (R"G) Ltd. lossis lwm tus neeg thib peb thiab koj tsis raug tso cai siv lawv yam tsis muaj kev tso cai sau ua ntej ntawm Unitronics lossis lwm tus neeg sab nrauv raws li lawv muaj.
Cov ntaub ntawv / Cov ntaub ntawv
 |
UNITRONICS IO-Link HUB Chav Kawm A Ntaus [ua pdf] Cov neeg siv phau ntawv qhia IO-Link HUB Class A Device, IO-Link HUB, Class A Device, Device |
