unitronics V230 Vision PLC+HMI Controller With Embedded HMI Panel
Esi sikhokelo sibonelela ngolwazi olusisiseko kwiiModeli ze-Unitronics 'V230/280/290 (Izikrini ezingezizo imibala).
Inkcazo ngokubanzi
Umbono we-PLC+HMIs ngabalawuli beengqiqo ezicwangcisekileyo eziquka iphaneli yokusebenza edityanisiweyo equlethe iscreen segraphic LCD kunye nebhodi yezitshixo. Zonke iimodeli zibonelela ngeempawu ezifanayo zePLC. Iimpawu zephaneli yokusebenza ziyahluka ngokwemodeli.
Unxibelelwano
- Izibuko ze-serial ezi-2: RS232 (COM1), RS232/RS485 (COM2)
- 1 Izibuko le-CANbus
- Umsebenzisi unoku-odola kwaye afake i-port eyongezelelweyo. Iintlobo zezibuko ezifumanekayo zezi: RS232/RS485, kunye ne-Ethernet
- Iibhloko zoMsebenzi woNxibelelwano ziquka: iSMS, GPRS, MODBUS serial/IP Protocol FB yenza ukuba i-PLC inxibelelane phantse naso nasiphi na isixhobo sangaphandle, ngonxibelelwano lwe-serial okanye nge-Ethernet.
I/O Iinketho
Umbono uxhasa idijithali, isantya esiphezulu, i-analog, ubunzima kunye nomlinganiselo wobushushu kwii-I/Os nge:
- Iimodyuli ze-Snap-in I/O
Qhagamshelana ngasemva komlawuli ukubonelela ngoqwalaselo lwe-I/O olukwibhodi - Iimodyuli zoKwandiswa kwe-I/O
Ii-I/Os zasekuhlaleni okanye ezikude zinokudityaniswa ngolwandiso lwezibuko okanye i-CANbus
Imo yolwazi
Le mowudi ikuvumela ukuba:
- View & Hlela amaxabiso omsebenzi, useto lwe-COM port, i-RTC kunye nescreen umahluko/ukukhanya kwezicwangciso
- Lungiselela isikrini esichukumisayo
- Misa, qalisa, kwaye usete kwakhona i-PLC
Inkqubo yeSoftware, & nezinto eziluncedo
Ukufaka iNdlela yoLwazi, cofa
- VisiLogic
Ukuqwalasela i-hardware ngokulula kwaye ubhale zombini i-HMI kunye ne-Ladder control applications; ithala leencwadi leBlock yeMsebenzi lenza lula imisebenzi entsonkothileyo efana ne-PID. Bhala isicelo sakho, kwaye emva koko uyikhuphele kumlawuli ngentambo yokucwangcisa ebandakanyiweyo kwikhithi.
Qaphela ukuba ukuze wenze inkqubo i-V290-19-B20B, kufuneka ukhethe i-V280/V530 kuLungiselelo lweHardware yeVisiLogic. - Izinto eziluncedo
Ezi ziquka iseva ye-UniOPC, i-Remote Access yeprogram ekude kunye nokuxilongwa, kunye ne-DataXport yokungena kwexesha lokungena
Ukufunda indlela yokusebenzisa kunye neprogram yomlawuli, kunye nokusebenzisa izinto eziluncedo ezifana ne-Remote Access, bhekisa kwi-VisiLogic Help system.
Iintlobo ze-Operand
IiBits zeMemori 4096
iMemory Integers, 16-bit, 2048
Iinteger ezinde, 32-bit, 256
I-Double Word, 32-bit engatyikitywanga, 64
Inkumbulo iyadada, 32-bit, 24
Izibali-xesha, 32-bit, 192
Izinto zokubala, 16-bit, 24
Amaxwebhu emveliso awongezelelweyo akwiThala leencwadi lobuGcisa, elibekwe kwa www.unitronicsplc.com.
Inkxaso yobugcisa iyafumaneka kwisiza, kwaye ukusuka support@unitronics.com.
Imixholo yeKit
- Umlawuli wombono
- Izibiyeli zokukhwela (x4)
- 3 pin isidibanisi sombane
- 5 pin CANbus isinxibelelanisi
- CANbus network ukupheliswa resistor
- Izixhobo zokuthoba
- Itywina lerabha
- Iseti eyongezelelweyo yezilayidi zebhodibhodi, ngokwemodeli
Iimpawu zesilumkiso kunye nezithintelo ngokubanzi
Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ulwazi olunxulumeneyo ngononophelo.
| Uphawu | Intsingiselo | Inkcazo |
 |
Ingozi | Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi. |
 Isilumkiso |
Isilumkiso Isilumkiso |
Ingozi echongiweyo inokubangela umonakalo emzimbeni kunye nepropathi. Lumka. |
- Ngaphambi kokusebenzisa le mveliso, umsebenzisi kufuneka afunde kwaye aqonde olu xwebhu
- Zonke exampi-les kunye nemizobo yenzelwe ukunceda ukuqonda, kwaye ayiqinisekisi ukusebenza kwe-Unitronics alwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi ex.ampLes
- Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe
- Kuphela ngabasebenzi benkonzo abaqeqeshiweyo ekufuneka basivule esi sixhobo okanye basilungise
Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati
- Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo
- Ukunqanda ukonakalisa isixokelelwano, musa ukuqhagamshelwa/ucime uqhagamshelwano xa umbane uvuliwe
Ukuqwalaselwa kokusingqongileyo
- Musa ukufaka kwiindawo ezine: uthuli olugqithise okanye oluqhubayo, irhasi etyiwayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka okubangelwa rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho enikwe kwiphepha leenkcukacha zobugcisa zemveliso.
- Ukungenisa umoya: 10mm isithuba esifunekayo phakathi kwesiphelo somlawuli esingaphezulu/esezantsi kunye neendonga ezivalekileyo
- Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi
- Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo
- Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane
Ukuthotyelwa kwe-UL
Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL.
Imodeli: V230-13-B20B, V280-18-B20B, V290-19-B20B zi-UL ezidweliswe kwindawo eqhelekileyo.
Imodeli: V230-13-B20B, V280-18-B20B zi-UL ezidweliswe kwiiNdawo ezinobungozi.
UL Indawo eqhelekileyo
Ukuze kuhlangatyezwane nemigangatho yendawo yesiqhelo ye-UL, indawo yolawulo nyusa esi sixhobo kumphezulu osicaba woHlobo 1 okanye 4 X oluvalekileyo.
Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D
La maNqaku oKhupho anxulumene nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe kwiindawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, iQela A, B, C kunye no-D.
Isilumkiso
- Esi sixhobo sifanelekile ukusetyenziswa kwiKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D, okanye iindawo ezingezizo ezinobungozi kuphela.
- I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
- ISILUMKISO—Ugqabhuko-dubulo Ingozi-ukutshintshwa kwamacandelo kunokuphazamisa ukufaneleka kweKlasi I, iCandelo lesi-2.
- ISILUMKISO – INGOZI YOKUQHUBEKA – Musa ukudibanisa okanye ukuqhawula izixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo leyo yaziwa ngokuba ayinabungozi.
- ISILUMKISO – Ukuvezwa kwezinye iikhemikhali kungonakalisa iipropathi zokutywina zezinto ezisetyenziswa kwiiRelays.
- Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.
Iphaneli-yokunyuswa
Kubalawuli abacwangciswayo abanokunyuswa nakwindawo yolawulo, ukuze bahlangabezane nomgangatho we-UL Haz Loc, indawo yolawulo-nyusa esi sixhobo kumphezulu osicaba woHlobo loku-1 okanye izivalo zoHlobo lwe-4X.
Unxibelelwano kunye nokugcinwa kweMemori eSukayo
Xa iimveliso ziquka nokuba yi-USB yonxibelelwano port, SD card slot, okanye zombini, akukho
i-slot yekhadi le-SD okanye izibuko le-USB zenzelwe ukuba zidityaniswe ngokusisigxina, ngelixa izibuko le-USB lenzelwe udweliso lwenkqubo kuphela.
Ukususa / Ukutshintsha ibhetri
Xa imveliso ifakelwe ibhetri, musa ukuyisusa okanye uyibuyisele endaweni yebhetri ngaphandle kokuba umbane ucinyiwe, okanye indawo leyo yaziwa ngokuba ayinabungozi.
Nceda uqaphele ukuba kucetyiswa ukuba ugcine yonke idatha egcinwe kwi-RAM, ukuze ugweme ukulahlekelwa idatha xa utshintsha ibhetri ngelixa umbane ucinyiwe. Ulwazi lomhla kunye nexesha luya kufuneka lusetwe ngokutsha emva kwenkqubo.
Ukunyuka
Imilinganiselo
V230
V280
V290
Ukunyuka
Ngaphambi kokuba uqale, qaphela ukuba:
- Iphaneli yokuxhoma ayikwazi ukuba ngaphezu kwe-5 mm ubukhulu
- Ukunciphisa ukuphazamiseka kwe-electromagnetic, faka isilawuli kwipaneli yentsimbi kunye nomhlaba unikezelo lwamandla ngokweenkcukacha ezikwiphepha lesi-6.
- Yenza ipaneli yokusika elungele umlawuli wakho wemodeli.
V230 Sika-out Imilinganiselo
V280 Sika-out Imilinganiselo
V290 Sika-out Imilinganiselo
Isilumkiso
- I-torque efunekayo yi-0.45 N · m (4.5 kgf · cm).
- Ukuba ufaka isilawuli kwiphaneli yentsimbi, umhlaba unikezelo lwamandla kuphela
I-V230:- Bomba umngxuma ukuze ulungele isikrufu se-NC6-32 esinikwe nekhithi.
- Ipeyinti yephaneli yokucoca kude nendawo yoqhagamshelwano ukuze uqinisekise i-conductive con
- Qhuba isikrufu emngxunyeni.
- Beka eli phini lilandelayo le-screw's, ngokolandelelwano oluboniswe kulo mfanekiso ukhaphayo: iwasha, isihlangu sentambo yentsimbi, iwasha yesibini, intwasahlobo, kunye
- Qwalasela:
Ucingo olusetyenziswe emhlabeni unikezelo lwamandla kufuneka lungagqithi kwi-10 cm ubude ukuba iimeko zakho azikuvumeli oku, musa ukuwubeka phantsi unikezelo lombane. - Qinisekisa ukuba ipaneli yentsimbi ifakwe ngokufanelekileyo emhlabeni.
- Qwalasela:
- Slayida isilawuli kwi-cut-out, uqinisekise ukuba isitywina serabha sisendaweni.
- Tyhila izibiyeli ezi-4 ezixhomayo kwiindawo zokubeka kumacala esilawuli njengoko kubonisiwe kumfanekiso osekunene.
- Qinisa izikrufu zesibiyeli kwindawo yolawulo. Bamba isibiyeli ngokukhuselekileyo ngokuchasene neyunithi ngelixa uqinisa isikrufu.
- Xa inyuswe ngokufanelekileyo, isilawuli sime ngokulinganayo kwiqela lenjongo elisikiweyo njengoko kubonisiwe ngezantsi.
Iingcingo: Ngokubanzi
- Esi sixhobo senzelwe ukusebenza kuphela kwi-SELV/PELV/Class 2/Limited Power environments
- Zonke izixhobo zombane kwinkqubo kufuneka zibandakanye ukugquma kabini. Iziphumo zonikezelo lwamandla kufuneka zilinganiswe njenge-SELV/PELV/Class 2/Limited Power.
- Sukuqhagamshela nokuba yi-'Neutral okanye 'Layini' isignali ye-110/220VAC kwi-pin ye-0V yesixhobo.
- Musa ukubamba iingcingo eziphilayo.
- Yonke imisebenzi yokufaka iintambo kufuneka yenziwe ngelixa umbane LUVALIWE.
- Izikhonkwane ezingasetyenziswanga akufanele zidityaniswe. Ukungawuhoyi lo myalelo kungonakalisa isixhobo
- Isilumkiso
- Ukuphepha ukonakalisa ucingo, ungagqithisi kwi-torque ephezulu ye-0.5 N·m (5 kgf·cm)
- Musa ukusebenzisa itoti, i-solder, okanye nayiphi na into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-14 AWG ucingo (0.13 mm 2-2.08 mm2).
- Hlubula ucingo ukuya kubude obuyi-7±0.5mm (0.250–0.300”).
- Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
- Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa uqhagamshelo olufanelekileyo.
- Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.
Izikhokelo zocingo
- Sebenzisa imibhobho yocingo eyahlukileyo kwiqela ngalinye kula alandelayo:
- Iqela loku-1: Umthamo ophantsitage I/O kunye nemigca yokubonelela, imigca yonxibelelwano.
- Iqela lesi-2: Umthamo ophezulutage Imigca, Umthamo ophantsitagImigca enengxolo efana neziphumo zomqhubi wemoto. Yahlula la maqela ubuncinane nge-10cm (4″). Ukuba oku akwenzeki, nqumla imibhobho kwi-90˚engile.
- Ukusebenza kakuhle kwenkqubo, onke amanqaku e-0V kwisistim kufuneka aqhagamshelwe kwisistim 0V kaloliwe wokubonelela.
Ukulahla isilawuli
Ukwandisa ukusebenza kwenkqubo, thintela ukuphazamiseka kwe-electromagnetic ngolu hlobo lulandelayo:
- Sebenzisa ikhabhinethi yentsimbi.
- Qhagamshela i-terminal ye-0V kumhlaba womhlaba wenkqubo ngexesha elinye, ngokukhethekileyo kufutshane nomlawuli kangangoko.
Ukunikezwa Amandla
Umlawuli ufuna umbane wangaphandle we-12 okanye i-24VDC. Igalelo elivumelekileyo voltagUluhlu lwe-e luyi-10.2-28.8VDC, kunye ne-ripple engaphantsi kwe-10%.
- Kufuneka usebenzise isixhobo sokukhusela isiphaluka sangaphandle
- Faka i-breaker circuit yangaphandle. Khuphela ngokuchasene ne-short-circuiting kwiingcingo zangaphandle
- Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane
Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo
Amazibuko oNxibelelwano
- Cima umbane phambi kokuba wenze uqhagamshelo lonxibelelwano
- Iimpawu zihambelana ne-0V yomlawuli; le yi-0V efanayo esetyenziswa lunikezelo lwamandla
- Isilumkiso
- Soloko usebenzisa iiadaptha zezibuko ezifanelekileyo
- Amazibuko othotho akabekwanga wodwa. Ukuba isilawuli sisetyenziswe ngesixhobo sangaphandle esingesodwa, kunqandwe umbane onokwenzekatage engaphezulu kwe-± 10V
Uthotho loNxibelelwano
Olu chungechunge lubandakanya i-2 RJ-11-uhlobo lwe-serial port kunye ne-CANbus port.
I-COM1 yi-RS232 kuphela. I-COM2 isetelwe nokuba yi-RS232 okanye i-RS485 nge-jumper njengoko kuchazwe ngezantsi.
Ngokungagqibekanga, izibuko lisetelwe ku-RS232.
Sebenzisa i-RS232 ukukhuphela iinkqubo kwi-PC, kunye nokunxibelelana nezixhobo ze-serial kunye nezicelo, ezifana ne-SCADA.
Sebenzisa i-RS485 ukwenza uthungelwano lwe-multi-drop enezixhobo eziya kuthi ga kwi-32.
Isilumkiso
- I-COM1 & 2 ayizodwa
Iipinouts
Ukuqhagamshela i-PC kwi-port ebekwe kwi-RS485, susa i-RS485 ikhonkco, kwaye uqhagamshele i-PC kwi-PLC ngentambo yokucwangcisa. Qaphela ukuba oku kunokwenzeka kuphela xa iimpawu zokulawula ukuhamba zingasetyenziswanga (nto leyo yimeko eqhelekileyo).
| RS232 | |
| Phina # | Inkcazo |
| 1* | Umqondiso we-DTR |
| 2 | 0V isalathiso |
| 3 | Uphawu lweTXD |
| 4 | Umqondiso we-RXD |
| 5 | 0V isalathiso |
| 6* | Umqondiso weDSR |
| RS485** | Izibuko loMlawuli | |
| Phina # | Inkcazo |  |
| 1 | Umqondiso (+) | |
| 2 | (uphawu lweRS232) | |
| 3 | (uphawu lweRS232) | |
| 4 | (uphawu lweRS232) | |
| 5 | (uphawu lweRS232) | |
| 6 | Umqondiso B (-) | |
*Iintambo zokucwangcisa eziqhelekileyo aziboneleli ngeendawo zoqhagamshelo kwizikhonkwane zoku-1 no-6.
** Xa izibuko lilungelelaniswe ne-RS485, iPin 1 (DTR) isetyenziselwa isignali A, kunye nePin 6 (DSR) isignali isetyenziselwa umqondiso B.
RS232 ukuya kwiRS485: Ukutshintsha Izicwangciso zeJumper
Izibuko lisetelwe ku-RS232 ngokwendalo yasefektri.
Ukutshintsha useto, qala ngokususa i-Snap-in I/O Modyuli, ukuba ifakelwe, uze usete izijumpi ngokwetheyibhile ilandelayo.
Phawula:
Kwiimodyuli ze-V230/V280/V290 kuphela kukho ifestile encinci njengoko ichazwe kwiphepha lesi-6 lokusetha i-jumper ngoko akukho mfuneko yokuvula umlawuli.
- Ngaphambi kokuba uqalise, bamba into ephantsi ukuze ukhuphe nayiphi na intlawulo ye-electrostatic
- Phambi kokuba ususe i-Snap-in I/O Modyuli okanye uvule isilawuli, kufuneka ucime umbane
RS232/RS485 Izicwangciso Jumper
| Umtsi | 1 | 2 | 3 | 4 |
| RS232* | A | A | A | A |
| RS485 | B | B | B | B |
| RS485 Ukupheliswa | A | A | B | B |
*Useto lwasefektri oluhlala lukhona.
Ukususa i-Snap-in I/O Modyuli
- Khangela amaqhosha amane kumacala emodyuli, amabini macala.
- Cinezela amaqhosha kwaye uwabambe phantsi ukuze uvule indlela yokutshixa.
- Gcoba ngobunono imodyuli ukusuka kwelinye icala ukuya kwelinye, ulula imodyuli ukusuka kumlawuli.
Ukufakela kwakhona i-Snap-in I/O Modyuli
- Layisha isikhokelo sesetyhula kwisilawuli kunye nezikhokelo kwi-Snap-in I/O Module njengoko kubonisiwe ngezantsi.
- Faka uxinzelelo olulinganayo kuzo zonke iikona ezi-4 de uve 'cofa' eyahlukileyo.
Imodyuli ifakiwe ngoku.
Khangela ukuba onke amacala kunye neekona zilungelelaniswe ngokuchanekileyo.
Ibhasi ye-CAN
Aba balawuli baquka izibuko le-CANbus. Sebenzisa oku ukwenza uthungelwano lolawulo olunatyisiweyo usebenzisa enye yezi protocols ze-CAN zilandelayo:
- CANopen: 127 abalawuli okanye izixhobo zangaphandle
- Ubunini be-UniCAN ye-UniCAN: abalawuli abangama-60, (i-512 data bytes kwiskeni ngasinye)
Izibuko le-CANbus libekwe lodwa ngokwahlukileyo.
I-CANbus Wiring
Sebenzisa intambo ephothiweyo. I-DeviceNet® etyebileyo ekhuselwe intambo ejijekileyo iyacetyiswa.
Izithinteli zothungelwano: Ezi zibonelelwa nomlawuli.
Beka izithinteli kwisiphelo ngasinye sothungelwano lwe-CANbus.
Ukuchasa kufuneka kumiselwe kwi-1%, 121Ω, 1/4W.
Qhagamshela umqondiso wasemhlabeni kwindawo enye kuphela, kufutshane nombane.
Unikezelo lwamandla othungelwano akufuneki lube sekupheleni kwenethiwekhi.
I-CANbus Connector
IiNgcaciso zobuGcisa
Esi sikhokelo sibonelela ngeenkcukacha zeemodeli ze-Unitronics 'V230-13-B20B,V280-18-B20B, V290-19-B20B.
Unokufumana ulwazi olongezelelweyo kwiThala leeNcwadi loBugcisa kwi www.unitronics.com.
Ukunikezwa Amandla
- Igalelo voltage 12VDC okanye 24VDC
- Uluhlu oluvumelekileyo lwe-10.2VDC ukuya kwi-28.8VDC kunye ne-ripple engaphantsi kwe-10%.
Max. ukusetyenziswa kwangoku
| @12VDC @24VDC
Ukusetyenziswa kwamandla okuqhelekileyo |
V230 | V280 | V290 |
| 280mA
140mA |
540mA
270mA |
470mA
230mA |
|
| 2.5W | 5.4W | 5.1W |
Ibhetri
- Back-up
Iminyaka eyi-7 eqhelekileyo kwi-25 ° C, i-backup yebhetri ye-RTC kunye nedatha yenkqubo, kubandakanywa idatha eguquguqukayo. - Ukutshintshwa
Ewe. Jonga kwimiyalelo ekuxwebhu: Ukutshintsha iBattery V230-280-290.pdf, efumaneka kwiThala leeNcwadi lobuGcisa le-Unitronics.
Umzobo wokuBonisa iSkrini
| Uhlobo lwe-LCD Ukhanyisa ukukhanya ngasemva Bonisa isisombululo, pixels Viewindawo yeTouchscreen 'Bamba' isalathiso sesikrini sesikrini |
V230 | V280 | V290 |
| STN | Umzobo we-B&W FSTN | ||
| I-LED etyheli-luhlaza | I-CCFL fluorescent lamp | ||
| 128×64 | 320×240 (QVGA) | ||
| 3.2″ | 4.7″ | 5.7″ | |
| Akukho nanye | Ukuxhathisa, i-analog | ||
| Akukho nanye | Isoftware (SB16) | Isoftware (SB16); Nge-buzzer | |
| Ilungiswe ngesandla. Jonga kwisihloko soNcedo lweVisi Logic: Ukumisela i-LCD Uthelekiso/Ukukhanya | Nge-software (Ixabiso leGcina kwi-SI 7). Jonga kwisihloko soNcedo lweVisi Logic: Ukucwangcisa ukuchasana kwe-LCD / ukuKhanya |
||
Ikhibhodi
| V230 | V280 | V290 |
| Inani lezitshixo 24 |
27 | akukho (virtual) |
| Ibandakanya izitshixo ezithambileyo kunye nephedi yealphanumeric | ||
| Uhlobo oluphambili Idome yesinyithi, i-membrane etywiniweyo yokutshintsha |
akukho nanye | |
| Izilayidi Umfanekiso, iphedi yealphanumeric, kunye namaqhosha oMsebenzi |
akukho nanye | |
Inkqubo
Imemori yosetyenziso 1MB
| Uhlobo lwe-operand | Ubungakanani | Uphawu | Ixabiso |
| Amasuntswana enkumbulo | 4096 | MB | Intwana (ikhoyili) |
| Iinombolo zeMemori | 2048 | MI | Ibhithi ye-16 isayiniwe/ayibhalwanga |
| Iinombolo ezinde | 256 | ML | Ibhithi ye-32 isayiniwe/ayibhalwanga |
| Igama eliphindwe kabini | 64 | DW | 32-bit engasayinwanga |
| Inkumbulo iyadada | 24 | MF | Ibhithi ye-32 isayiniwe/ayibhalwanga |
| Izibali-xesha | 192 | T | 32-bit |
| Izixhobo zokubala | 24 | C | 16-bit |
- IiTheyibhuli zeDatha 120K (dynamic)/192K (static)
- I-HMI ibonisa ukuya kuthi ga kwi-255
- Ixesha lokuSkena 30μsec nge-1K yesicelo esiqhelekileyo
Unxibelelwano
- Amazibuko othotho 2. Jonga iNqaku loku-1
RS232
- Ukwahlukaniswa kweGalvanic No
- Umqulutage imida 20V ngokupheleleyo
- Uluhlu lwenqanaba le-Baud COM1 COM2 300 ukuya ku-57600 bps 300 ukuya kwi-115200 bps
- Ubude beCable Ukuya kwi-15m (50′)
- RS485
- Ukwahlukaniswa kweGalvanic No
- Umqulutage imida −7 ukuya +12V umahluko omkhulu
- Umlinganiselo we-Baud kwi-300 ukuya kwi-115200 bps
- IiNodes Ukuya kuthi ga kwi-32
- Uhlobo lwekheyibhile Isibini esijijekileyo esijikiweyo, ngokuhambelana ne-EIA RS485
- Ubude beCable Ukuya kwi-1200m (4000′)
- Izibuko le-CANbus 1
- IiNodi zeCANopen Unitronics' CANbus protocol
- 127 60
- Iimfuno zamandla 24VDC (±4%), 40mA max. ngeyunithi nganye
- Ukwahlukaniswa kweGalvanic Ewe, phakathi kwe-CANbus kunye nomlawuli
- Ubude bekhebula/umlinganiselo webhaud
- 25 m 1 Mbit/s
- 100 m 500 Kbit/s
- 250 m 250 Kbit/s
- 500 m 125 Kbit/s
- 500 m 100 Kbit/s
- 1000 m* 50 Kbit/s
- 1000 m*
* Ukuba ufuna ubude bekhebula ngaphezulu kwe-500 yeemitha, qhagamshelana nenkxaso yobugcisa.
Izibuko ozikhethelayo
Umsebenzisi unokufakela izibuko elongezelelweyo, elifumaneka ngeodolo eyahlukileyo. Iintlobo zezibuko ezifumanekayo zezi: RS232/RS485, kunye ne-Ethernet.
Amanqaku:
- I-COM1 ixhasa i-RS232 kuphela.
I-COM2 isetelwe nokuba yi-RS232/RS485 ngokweesethingi ze-jumper njengoko kubonisiwe kwimveliso
Isikhokelo soFakelo. Isetingi yasefektri: RS232.
Mna / Os
- Ngemodyuli
Inani le-I/Os kunye neentlobo ziyahluka ngokwemodyuli. Ixhasa ukuya kuthi ga kwi-256 yedijithali, isantya esiphezulu, kunye ne-analog I/Os. - Iimodyuli ze-Snap-in I/O
Iiplagi kwizibuko elingasemva ukwenza i-PLC ezimeleyo ukuya kuthi ga kwi-43 I/Os. - Iimodyuli zokwandiswa
Iadaptha yendawo, nge-I/O Expansion Port. Hlanganisa ukuya kwi-8 I / O Ukwandiswa
Iimodyuli ezibandakanya ukuya kuthi ga kwi-128 ezongezelelweyo I/Os.
I-adapter ye-I/O ekude, nge-CANbus port. Qhagamshela ukuya kuthi ga kwiiadaptha ezingama-60; qhagamshela ukuya kwi-8 I / O iimodyuli zokwandisa kwi-adapter nganye.
Imilinganiselo
- Ubungakanani Bona Iphepha 5 V230 V280 V290
- Ubunzima 429g (15.1 oz) 860g (30.4 oz) 840g (29.7 oz)
Ukunyuka
- Iphaneli-yokunyuswa Ngezibiyeli
Okusingqongileyo
- Ngaphakathi kwikhabhathi IP20 / NEMA1 (ityala)
- Iphaneli inyuswe IP65 / NEMA4X (iphaneli yangaphambili)
- Ubushushu bokusebenza 0 ukuya ku-50ºC (32 ukuya ku-122ºF)
- Ubushushu bokugcina -20 ukuya ku-60ºC (-4 ukuya ku-140ºF)
- Ukufuma okuzalanayo (RH) 5% ukuya kuma-95% (akunciphisi)
Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike.
Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungonaki. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu.
Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi.
Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kubandakanywa noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo kwangaphambili. yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo.
Amaxwebhu / Izibonelelo
 |
unitronics V230 Vision PLC+HMI Controller With Embedded HMI Panel [pdf] Isikhokelo somsebenzisi V230 Vision PLC HMI Controller NgePaneli yeHMI eEmbedded, V230, Vision PLC HMI Controller NgePhaneli yeHMI eEmbedded, Iphaneli yeHMI eEmbedded |
