unitronics V230 Vision PLC+HMI Controller With Embedded HMI Panel
Tataiso ena e fana ka tlhahisoleseding ea motheo bakeng sa Mehlala ea Unitronics V230/280/290 (Lits'oants'o tse Seng tsa mebala).
Tlhaloso e Akaretsang
Vision PLC+HMIs ke li-control tsa logic tse hlophisehang tse kenyelletsang karolo ea ts'ebetso e ts'oanang e nang le skrine ea graphic ea LCD le keyboard. Mefuta eohle e fana ka likarolo tse tšoanang tsa PLC. Likarolo tsa phanele ea ts'ebetso li fapana ho latela mohlala.
Lipuisano
- Likou tse 2 tsa serial: RS232 (COM1), RS232/RS485 (COM2)
- 1 boema-kepe ba CANbus
- Mosebedisi a ka odara le ho kenya boema-kepe bo eketsehileng. Mefuta e fumanehang ea boema-kepe ke: RS232/RS485, le Ethernet
- Lithibelo tsa Mosebetsi oa Puisano li kenyelletsa: SMS, GPRS, MODBUS serial/IP Protocol FB e nolofalletsa PLC ho buisana le hoo e batlang e le sesebelisoa sefe kapa sefe sa kantle, ka likhokahano tsa serial kapa Ethernet.
Likhetho tsa I / O
Pono e ts'ehetsa li-I/O tsa dijithale, lebelo le phahameng, analoge, boima le tekanyo ea mocheso ka:
- Snap-in I/O Modules
Hokela ka morao ho molaoli ho fana ka tlhophiso ea I/O ea boto - Li-Module tsa Katoloso ea I/O
Li-I/O tsa lehae kapa tse hole li ka eketsoa ka boema-kepe ba katoloso kapa CANbus
Mokhoa oa Boitsebiso
Mokhoa ona o u nolofalletsa ho:
- View & Hlophisa boleng ba tšebetso, li-setting tsa boema-kepe ba COM, RTC le litlhophiso tsa phapang/ khanya
- Lekanya skrine ea ho ama
- Emisa, qala, 'me u tsosolose PLC
Mananeo Software, & Utilities
Ho kenya Mokgwa wa Tlhahisoleseding, tobetsa
- VisiLogic
Lokisa lisebelisoa tsa thepa habonolo 'me u ngole lisebelisoa tsa taolo ea HMI le Ladder; laeborari ea Function Block e nolofatsa mesebetsi e rarahaneng joalo ka PID. Ngola kopo ea hau, ebe u e khoasolla ho molaoli ka thapo ea lenaneo e kenyellelitsoeng ka har'a khiti.
Hlokomela hore molemong oa ho hlophisa V290-19-B20B, u tlameha ho khetha V280/V530 ho VisiLogic's Hardware Configuration. - Lisebelisoa
Tsena li kenyelletsa seva sa UniOPC, phihlello ea Remote bakeng sa mananeo a hole le tlhahlobo, le DataXport bakeng sa ho rengoa ha data ka nako ea nako.
Ho ithuta ho sebelisa le ho hlophisa molaoli, hammoho le ho sebelisa lisebelisoa tse kang Remote Access, sheba ho VisiLogic Help system.
Mefuta ea operand
Memori Bits 4096
Memory Integers, 16-bit, 2048
Nako e telele, 32-bit, 256
Double Word, 32-bit e sa ngolisoang, 64
Memory Floats, 32-bit, 24
Li-timers, 32-bit, 192
Li-counter, 16-bit, 24
Litokomane tse ling tsa sehlahisoa li ho Technical Library, e teng ho www.unitronicsplc.com.
Tšehetso ea tekheniki e fumaneha setšeng, le ho tloha support@unitronics.com.
Litaba tsa Kit
- Taolo ea pono
- Masakaneng a ho kenya (x4)
- 3 Pin sehokelo sa phepelo ea matla
- 5 Pin sehokelo sa CANbus
- Mohanyetsi oa ho emisa marang-rang oa CANbus
- Hardware ea fatše
- Tiiso ea rabara
- Sete e eketsehileng ea li-slide tsa keyboard, ho latela mohlala
Matshwao a Tlhokomediso le Dithibelo tse Akaretsang
Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.
| Letšoao | Tlhaloso | Tlhaloso |
 |
Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. |
 Tlhokomeliso |
Tlhokomediso Tlhokomeliso |
Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. E-ba hlokolosi. |
- Pele o sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena
- Tsohle exampLits'oants'o le lits'oants'o li reretsoe ho thusa ho utloisisa, 'me ha li tiise hore ts'ebetso ea Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho ipapisitsoe le lintlha tsena.amples
- Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha
- Ke basebeletsi ba nang le tsebo feela ba lokelang ho bula sesebelisoa sena kapa ho lokisa
Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa
- Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng
- Ho qoba ho senya sistimi, o seke oa hokela / o hakolla sesebelisoa ha motlakase o le teng
Mehopolo ea Tikoloho
- Se ke oa kenya libakeng tse nang le: lerole le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso ea kamehla kapa ho thothomela ho feteletseng, ho ea ka litekanyetso tse fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa.
- Moea oa moea: Ho hlokahala sebaka sa 10mm lipakeng tsa mathōko a ka holimo/ka tlaase le mabota a kampetsoeng
- U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti
- Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo le lisebelisoa tsa motlakase
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mohlala: V230-13-B20B, V280-18-B20B, V290-19-B20B li thathamisitsoe ke UL bakeng sa Sebaka se Tloaelehileng.
Mohlala: V230-13-B20B, V280-18-B20B li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi.
UL Sebaka se Tloaelehileng
E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa ea 4 X.
Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
Tlhokomeliso
- Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela.
- Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
- TEMOSO—Ho phatloha Kotsi-ho nkela likarolo sebaka ho ka sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
- TLHOKOMELO – KOTSI EA HO PHAHLOA – Se ke oa hokela kapa oa hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- TLHOKOMELO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
- Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.
Phanele-Mounting
Bakeng sa li-controller tse ka hlophisoang le ka har'a phanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X.
Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li kenyelletsa boema-kepe ba puisano ba USB, slot ea karete ea SD, kapa ka bobeli, ha ho joalo
sekotjana sa karete ea SD kapa boema-kepe ba USB li reretsoe ho hokela ruri, ha boema-kepe ba USB bo reretsoe ho etsa mananeo feela.
Ho ntsha/ Ho ntsha betri
Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi.
Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.
Ho phahamisa
Litekanyo
V230
V280
V290
Ho phahamisa
Pele u qala, hlokomela hore:
- Phanele e ntseng e eketseha ha ea lokela ho ba botenya bo fetang 5 mm
- Ho fokotsa tšitiso ea motlakase, beha selaoli holim'a phanele ea tšepe 'me u fafatse phepelo ea motlakase ho latela lintlha tse leqepheng la 6.
- Etsa sekheo sa phanele se lumellanang le molaoli oa hau oa mohlala.
Litekanyo tse khaotsoeng tsa V230
Litekanyo tse khaotsoeng tsa V280
Litekanyo tse khaotsoeng tsa V290
Tlhokomeliso
- Torque e hlokahalang ke 0.45 N · m (4.5 kgf·cm).
- Haeba u beha selaoli holim'a phanele ea tšepe, tšela matla a motlakase feela
V230:- phunya lesoba ho lekana sc6-32 screw filoeng le khiti.
- Hlakola pente hole le sebaka sa ho ikopanya ho netefatsa conductive con
- Khanna sekoti ka mokoting.
- Beha shank e latelang ea screw's, ka tatellano e bontšitsoeng setšoantšong se tsamaeang le sena: washer, seeta sa mohala oa mohala, washer ea bobeli, selemo le
- Tsepamisa maikutlo:
Mohala o sebelisoang ho fafatsa matla a motlakase ha oa lokela ho feta bolelele ba 10 cm haeba maemo a hau a sa u lumelle sena, u se ke oa senya phepelo ea motlakase. - Etsa bonnete ba hore phanele ea tšepe e entsoe hantle.
- Tsepamisa maikutlo:
- Tsamaisa selaoli sebakeng se sehiloeng, ho etsa bonnete ba hore tiiso ea rabara e teng.
- Sututsa li-brackets tse 4 ho li-slots tsa tsona mahlakoreng a molaoli joalo ka ha ho bonts'itsoe setšoantšong se ka ho le letona.
- Tiisa likurufu tsa borakete khahlano le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw.
- Ha e kentsoe ka nepo, selaoli se lutse hantle ka har'a karolo e sehiloeng ea phanele joalo ka ha ho bonts'itsoe ka tlase.
Wiring: Kakaretso
- Thepa ena e etselitsoe ho sebetsa feela libakeng tsa SELV/PELV/Class 2/Limited Power
- Lisebelisoa tsohle tsa motlakase tsamaisong li tlameha ho kenyelletsa ho pata habeli. Liphello tsa phepelo ea motlakase li tlameha ho lekanyetsoa joalo ka SELV/PELV/Class 2/Limited Power.
- Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
- U se ke ua tšoara lithapo tse phelang.
- Mesebetsi eohle ea lithapo e lokela ho etsoa ha motlakase o TLOhile.
- Lithako tse sa sebelisoeng ha lia lokela ho kopanngoa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa
- Tlhokomeliso
- Ho qoba ho senya terata, u se ke ua feta torque e ka holimo ho 0.5 N·m (5 kgf·cm)
- Se ke oa sebelisa thini, solder, kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e robehe.
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-14 AWG (0.13 mm 2–2.08 mm2).
- Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300").
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
Litaelo tsa Wiring
- Sebelisa mehala e arohaneng ea likhoele bakeng sa sehlopha ka seng sa lihlopha tse latelang:
- Sehlopha sa 1: Phallo e tlasetage I/O le likhoele tsa phepelo, mehala ea puisano.
- Sehlopha sa 2: Phallo e phahamengtage Lines, Low voltage mehala e lerata joalo ka liphetho tsa mokhanni oa enjene. Arola lihlopha tsena ka bonyane 10cm (4″). Haeba sena se sa khonehe, tšela likotopo ka 90˚angle.
- Bakeng sa ts'ebetso e nepahetseng ea sistimi, lintlha tsohle tsa 0V tsamaisong li lokela ho hokahana le seporo sa phepelo sa 0V.
Earthing the Controller
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka tsela e latelang:
- Sebelisa khabinete ea tšepe.
- Hokela terminal ea 0V sebakeng sa lefats'e sa sistimi ka nako e le 'ngoe, ka ho khetheha e le haufi le molaoli kamoo ho ka khonehang.
Phepelo ea motlakase
Molaoli o hloka phepelo ea motlakase ea kantle ea 12 kapa 24VDC. Kenyeletso e dumelletsweng voltagmefuta ea e ke 10.2-28.8VDC, e nang le ripple e ka tlase ho 10%.
- U tlameha ho sebelisa sesebelisoa sa kantle sa tšireletso sa potoloho
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase
Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang
Li-Ports tsa puisano
- Tima motlakase pele o etsa likhokahano tsa likhokahano
- Lipontšo li amana le 0V ea molaoli; ena ke eona 0V e sebelisoang ke phepelo ea motlakase
- Tlhokomeliso
- Kamehla sebelisa li-adapter tse loketseng tsa koung
- Li-ports tsa serial ha lia aroloa. Haeba molaoli o sebelisoa ka sesebelisoa sa kantle se sa itšehla thajana, qoba matla a ka bang tengtage e fetang ± 10V
Lipuisano tsa Seriana
Letoto lena le na le likou tse 2 tsa mofuta oa RJ-11 le boema-kepe ba CANbus.
COM1 ke RS232 feela. COM2 e kanna ea hlophisoa ho RS232 kapa RS485 ka jumper joalo ka ha ho hlalositsoe ka tlase.
Ka kamehla, boema-kepe bo behiloe ho RS232.
Sebelisa RS232 ho khoasolla mananeo ho tsoa komporong, le ho buisana le lisebelisoa tsa serial le lits'ebetso, joalo ka SCADA.
Sebelisa RS485 ho theha marang-rang a marotholi a mangata a nang le lisebelisoa tse fihlang ho 32.
Tlhokomeliso
- COM1 & 2 ha lia aroloa
Pinouts
Ho hokela PC boema-kepe bo hlophisitsoeng ho RS485, tlosa sehokelo sa RS485, 'me u hokele PC ho PLC ka thapo ea lenaneo. Hlokomela hore sena se ka khoneha feela haeba matšoao a ho laola phallo a sa sebelisoe (e leng boemo bo tloaelehileng).
| RS232 | |
| Pin # | Tlhaloso |
| 1* | Letšoao la DTR |
| 2 | Tlhaloso ea 0V |
| 3 | Letšoao la TXD |
| 4 | Letšoao la RXD |
| 5 | Tlhaloso ea 0V |
| 6* | Letšoao la DSR |
| RS485** | Port ea Molaoli | |
| Pin # | Tlhaloso |  |
| 1 | Letšoao (+) | |
| 2 | (Lets'oao la RS232) | |
| 3 | (Lets'oao la RS232) | |
| 4 | (Lets'oao la RS232) | |
| 5 | (Lets'oao la RS232) | |
| 6 | Letshwao la B (-) | |
*Lithapo tse tloaelehileng tsa lenaneo ha li fane ka lintlha tsa khokahanyo bakeng sa Pins 1 le 6.
** Ha kou e ikamahanya le RS485, Pin 1 (DTR) e sebelisetsoa lets'oao la A, 'me lets'oao la Pin 6 (DSR) le sebelisetsoa lets'oao la B.
RS232 ho isa ho RS485: Ho fetola Litlhophiso tsa Jumper
Boema-kepe bo behiloe ho RS232 ka kamehla feme.
Ho fetola litlhophiso, qala ka ho tlosa Snap-in I / O Module, haeba e kentsoe, ebe u beha li-jumpers ho latela tafole e latelang.
Hlokomela:
Bakeng sa li-module tsa V230/V280/V290 feela ho na le fensetere e nyane joalo ka ha e hlalositsoe leqepheng la 6 bakeng sa maemo a jumper kahoo ha ho hlokahale ho bula molaoli.
- Pele o qala, ama ntho e theiloeng fatše ho ntša tefiso efe kapa efe ea electrostatic
- Pele o tlosa Snap-in I/O Module kapa o bula molaoli, o tlameha ho tima motlakase
RS232/RS485 Litlhophiso tsa Jumper
| Jumper | 1 | 2 | 3 | 4 |
| RS232 * | A | A | A | A |
| RS485 | B | B | B | B |
| RS485 Phediso | A | A | B | B |
* Litlhophiso tsa feme ea kamehla.
Ho tlosa Snap-in I/O Module
- Fumana likonopo tse 'nè ka mahlakoreng a module, tse peli ka lehlakoreng le leng.
- Tobetsa likonopo ebe u li tšoara fatše ho bula mochine oa ho notlela.
- Ka bonolo sisinya module ho tloha ka lehlakoreng le leng ho ea ho le leng, ho nolofatsa module ho tloha ho molaoli.
Ho kenya hape Snap-in I/O Module
- Tsamaisa litataiso tse selikalikoe ho molaoli le litataiso tse ho Snap-in I/O Module joalo ka ha ho bonts'itsoe ka tlase.
- Sebelisa esita le khatello likhutlong tsohle tse 4 ho fihlela u utloa 'tobetsa' e ikhethang.
Hona joale module e kentsoe.
Etsa bonnete ba hore mahlakore le likhutlo tsohle li hlophisitsoe hantle.
CANbus
Balaoli bana ba kenyelletsa boema-kepe ba CANbus. Sebelisa sena ho theha marang-rang a taolo a arolelanoang ka ho sebelisa e 'ngoe ea liprothokholo tse latelang tsa CAN:
- CANopen: balaoli ba 127 kapa lisebelisoa tsa kantle
- UniCAN e nang le thepa ea Unitronics: balaoli ba 60, (li-byte tsa data tse 512 ka skena)
Boema-kepe ba CANbus bo qheletsoe ka thoko.
CANbus Wiring
Sebelisa thapo e sothehileng. Ho khothaletsoa thapo e sothehileng ea DeviceNet® e teteaneng e sirelelitsoeng.
Li-terminator tsa marang-rang: Tsena li fanoa ka molaoli.
Beha li-terminators pheletsong e 'ngoe le e 'ngoe ea marang-rang a CANbus.
Ho hanyetsa ho tlameha ho behoa ho 1%, 121Ω, 1/4W.
Hokela lets'oao la fatše lefatšeng sebakeng se le seng feela, haufi le phepelo ea motlakase.
Matla a marang-rang ha a hloke ho ba qetellong ea marang-rang.
Sehokelo sa CANbus
Litlhaloso tsa Tekheniki
Tataiso ena e fana ka litlhaloso tsa mefuta ea Unitronics V230-13-B20B,V280-18-B20B, V290-19-B20B.
U ka fumana boitsebiso bo eketsehileng ho Library ea Botekgeniki ho www.unitronics.com.
Phepelo ea motlakase
- Keletso voltage 12VDC kapa 24VDC
- Sebaka se lumelletsoeng 10.2VDC ho isa ho 28.8VDC e nang le ripple e ka tlase ho 10%.
Max. tshebediso ya jwale
| @12VDC @24VDC
Tšebeliso e tloaelehileng ea matla |
V230 | V280 | V290 |
| 280mA
140mA |
540mA
270mA |
470mA
230mA |
|
| 2.5W | 5.4W | 5.1W |
Betri
- Ntlafatsa
Lilemo tse 7 tse tloaelehileng ho 25 ° C, bekapo ea betri bakeng sa RTC le data ea sistimi, ho kenyelletsa le data e fapaneng. - Ho nkela sebaka
Ee. Sheba litaelo tse tokomaneng: Ho Fetola Battery V230-280-290.pdf, e fumanehang ho Unitronics' Technical Library.
Skrine ea Pontšo ea Graphic
| Mofuta oa LCD oa leseli la morao-rao Bontša qeto, lipikselse Viewsebakeng sa Touchscreen 'Touch' e bonts'a Phapang ea skrini |
V230 | V280 | V290 |
| STN | Setšoantšo sa B&W FSTN | ||
| LED e mosehla-tala | CCFL fluorescent lamp | ||
| 128x64 | 320×240 (QVGA) | ||
| 3.2″ | 4.7″ | 5.7″ | |
| Ha ho letho | Ho hanyetsa, analogue | ||
| Ha ho letho | Software (SB16) | Software (SB16); Ka buzzer | |
| E hlophisitsoe ka letsoho. Sheba sehlooho sa Thuso ea Visi Logic: Ho theha LCD Phapang/ Khanya | Ka software (Boleng ba polokelo ho SI 7). Sheba sehlooho sa Thuso ea Visi Logic: Ho beha LCD Phapang / Khanya |
||
Keyboard
| V230 | V280 | V290 |
| Palo ea linotlolo 24 |
27 | ha ho letho (virtual) |
| E kenyelletsa linotlolo tse bonolo le li-keypad tsa alphanumeric | ||
| Mofuta oa senotlolo Dome ea tšepe, switch e tiisitsoeng ea membrane |
ha ho letho | |
| Liselaete Setšoantšo, likonopo tsa alphanumeric, le linotlolo tsa Mosebetsi |
ha ho letho | |
Lenaneo
Memori ea ts'ebeliso 1MB
| Mofuta oa operand | Bongata | Letšoao | Boleng |
| Likotoana tsa memori | 4096 | MB | Bit (khola) |
| Lintlha tsa Memori | 2048 | MI | 16-bit e saennoe/e sa saena |
| Linomoro tse telele | 256 | ML | 32-bit e saennoe/e sa saena |
| Mantsoe a Habeli | 64 | DW | 32-bit e sa saenneng |
| Mehopolo E phaphamala | 24 | MF | 32-bit e saennoe/e sa saena |
| Lisebelisoa tsa nako | 192 | T | 32-bit |
| Libali | 24 | C | 16-bit |
- Lintlha tsa Table 120K (dynamic)/192K (static)
- HMI e hlahisa ho fihla ho 255
- Skena Nako 30μsec ka 1K ea ts'ebeliso e tloaelehileng
Puisano
- Serial Ports 2. Sheba Tlhokomeliso 1
RS232
- Galvanic ho itšehla thajana No
- Moqtage fokotsa 20V e felletseng ka ho fetesisa
- Boemo ba sekhahla sa Baud COM1 COM2 300 ho isa ho 57600 bps 300 ho isa 115200 bps
- Bolelele ba thapo Ho fihla ho 15m (50′)
- RS485
- Galvanic ho itšehla thajana No
- Moqtagmoeli oa e -7 ho +12V phapang e phahameng
- Baud e lekanya 300 ho isa ho 115200 bps
- Nodes Ho fihlela ho 32
- Mofuta oa thapo o Shielded o sothehileng, ho latela EIA RS485
- Bolelele ba thapo Ho fihla ho 1200m (4000′)
- Boema-kepe ba CANbus 1
- Nodes CANopen Unitronics' liprothokholo tsa CANbus
- 127 60
- Litlhoko tsa matla 24VDC (± 4%), 40mA max. ka yuniti
- Galvanic ho itšehla thajana E, pakeng tsa CANbus le molaoli
- Bolelele ba thapo/sekhahla sa baud
- 25 m 1 Mbit/s
- 100 m 500 Kbit/s
- 250 m 250 Kbit/s
- 500 m 125 Kbit/s
- 500 m 100 Kbit/s
- 1000 m* 50 Kbit/s
- 1000 limithara
* Haeba o hloka bolelele ba thapo ho feta limithara tse 500, ikopanye le tšehetso ea tekheniki.
Boema-kepe ba boikhethelo
Mosebelisi a ka kenya boema-kepe bo eketsehileng, bo fumanehang ka odara e arohaneng. Mefuta e fumanehang ea boema-kepe ke: RS232/RS485, le Ethernet.
Lintlha:
- COM1 e ts'ehetsa RS232 feela.
COM2 e kanna ea hlophisoa ho RS232/RS485 ho latela litlhophiso tsa jumper joalo ka ha ho bonts'itsoe ho sehlahisoa sa sehlahisoa.
Tataiso ea ho Kena. Boemo ba feme: RS232.
Ke / Os
- Ka mojule
Palo ea li-I/O le mefuta e fapana ho ea ka mojule. E ts'ehetsa ho fihla ho 256 dijithale, lebelo le phahameng, le li-I/O tsa analoge. - Snap-in I/O modules
E hokela koung e ka morao ho theha PLC e ikemetseng e nang le li-I/O tse fihlang ho 43. - Li-module tsa katoloso
Adapter ea lehae, ka I/O Expansion Port. Kopanya ho fihla ho 8 I/O Katoloso
Li-module tse nang le li-I/O tse ling tse fihlang ho tse 128.
Adapter e hole ea I/O, ka boema-kepe ba CANbus. Hokela li-adapter tse ka bang 60; hokela ho fihla ho li-module tse 8 tsa katoloso ea I/O ho adaptara ka 'ngoe.
Litekanyo
- Boholo Bona Leqephe 5 V230 V280 V290
- Boima ba 'mele ke 429g (15.1 oz) 860g (30.4 oz) 840g (29.7 oz)
Ho phahamisa
- Ho kenya liphanele ka li-brackets
Tikoloho
- Ka hare ho khabinete IP20 / NEMA1 (nyeoe)
- Panele e kentsoeng IP65 / NEMA4X (phanele e ka pele)
- Mocheso oa tšebetso 0 ho isa ho 50ºC (32 ho isa ho 122ºF)
- Mocheso oa polokelo -20 ho 60ºC (-4 ho 140ºF)
- Mongobo o Relative (RH) 5% ho isa ho 95% (o sa nyenyefatseng)
Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng.
Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena.
Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena.
Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona.
Litokomane / Lisebelisoa
 |
unitronics V230 Vision PLC+HMI Controller With Embedded HMI Panel [pdf] Bukana ea Mosebelisi V230 Vision PLC HMI Controller With Embedded HMI Panel, V230, Vision PLC HMI Controller With Embedded HMI Panel, Embedded HMI Panel |
