Pitso-tsela
02081.AB
Mojule oa ponts'o bakeng sa mehala ea ho fetisa le ho bonts'a, phepelo ea motlakase 24 V dc SELV, e felletse ka setsi se le seng bakeng sa ho kenya semi-recessed marakong a bobebe, mabokoseng a sebaka sa 60 mm lipakeng tsa litsi, kapa mabokoseng a litlokotsebe tse 3.
Sesebelisoa, se kentsoeng ka har'a kamore e le 'ngoe, se entsoe ka module ea ponts'o le module ea yuniti ea lentsoe. Mojule oa ponts'o o thusa ho romella le ho laola mehala e entsoeng ke bakuli le / kapa ke basebetsi ba bongaka le ba bongaka ba bongaka le ho bonts'a lintlha tse amanang le mehala (nomoro ea kamore, nomoro ea bethe, boemo ba mohala, mohopolo oa liketsahalo, joalo-joalo). Sesebelisoa, ka mor'a ho hlophisoa ha bonolo, se ka sebelisoa e le mochine oa kamore kapa e le mochine oa mookameli; e na le likonopo tse 4 tse ka pele bakeng sa thuso le mehala ea ts'ohanyetso, boteng, lethathamo la liketsahalo, le lintlha tse 5 tse ka lokisehang. Mojule oa ponts'o o thusa ho hokahanya lebone la 02084 ho bonts'a mooki ea teng, mohala oa kamore ea ho hlapela, le mohala oa phaposi.
Boemong ba standby (ke hore ha ho na ts'ebetso e etsoang sesebelisoa), pontšo e bontša nako ea hona joale ka mokhoa oa inthaneteng le VDE-0834 haeba tsamaiso e na le pontšo ea liphaseje.
Kalafo ea antibacteria e tiisa bohloeki bo feletseng ka lebaka la ketso ea li-ion tsa silevera (AG+), tse thibelang ho thehoa le ho ata ha likokoana-hloko, libaktheria, likokoana-hloko le li-fungus. Ho boloka bohloeki le katleho ea ketso ea eona ea antibacteria, hloekisa sehlahisoa kamehla.
LITŠOANTŠISO.
- Phepelo voltage: 24 V dc SELV ±20%
- Monyetla: 70 mA.
- Lamp ho monya tlhahiso: 250 mA max
- Ho kenngoa ha LED: 250 mA max
- Mohatla oa mohatla oa lead lead: 3 x 30 mA (30 mA e ngoe le e ngoe).
- Mocheso oa ho sebetsa: +5 °C - +40 °C (ka tlung).
PELE VIEW.
- Tobetsa konopo A: Ho tsamaisetsa lenaneng la diketsahalo (mohatong wa tlhophiso: ho netefatsa tshebetso).
- Konopo B: Mohala oa tshohanyetso
- Konopo C: Mohala o tlwaelehileng kapa wa thuso (mohatong wa tlhophiso: eketsa/fokotsa, e/tjhe).
- Push-button D: Mooki o teng (mohatong oa tlhophiso: eketsa/fokotsa, e/che).
BONTŠA.
LIEKETSENG MAHLOKO
 |
Phomola Pontšo ea nako e fanoeng ke yuniti e bohareng (e fanoeng ke PC e bonts'a mokhoa oa marang-rang kapa pontšo ea phaseje). |
 |
Boteng kapa pontšo ea mookameli (nako e fanoa ke PC e bontšang mokhoa oa marang-rang kapa pontšo ea coridor) |
 |
Mohala o tlwaelehileng o tswang phaposing e le nngwe: • Lebatooa la 5 • Kamore ea 4 |
 |
Mohala oa tshohanyetso o tsoang phaposing e le 'ngoe: • Lebatooa la 5 • Kamore ea 4 • Bethe ea 2 |
 |
Mohala oa tšohanyetso o hole: • Lebatooa la 5 • Kamore ea 4 • Bethe ea 2 Boemo ba 2 lethathamong la liketsahalo tse hlano. |
 |
Pontšo ea boteng bo hole. Boemo ba 1 lethathamong la liketsahalo tse 'nè. |
 |
Kanale ea lentsoe kapa kanale ea 'mino e buletsoe ka molumo o mahareng (ka 23:11 lihora). |
 |
Phomola (ha ho se na PC). |
 |
Boteng bo kentsoeng kapa pontšo ea taolo (ha PC e le sieo). |
LIKELETSO.
HO KENYA MABOTO LESELI.
- HO KENYA MABOKONG A RUNDING A HLAHANG A TSOANG A NA LE FIXING CENTRE DISTANCE 60 mm.
- HO KENYA HO 3-MODULE FLUSH-Mounting BOXS.
HO KENYA MABOTO A LITENANE.
- HO KENYA HO 3-MODULE RECANGULAR FLUSH-Mounting BOX.
- HO KENYA HO LEBOKO LE Round FLUSH-MOUNTING LE BASE FIXING LE LITŠOANTŠISO KA LIHLOOHO.
HLOKOMELA PONTSHO MODULE
MOSEBETSI.
Pontšo ea module e sebelisetsoa ho etsa mesebetsi e latelang:
Letsa.
Pitso e ka etsoa:
- ka ho tobetsa konopo e khubelu
(C) bakeng sa pitso ea kamore; - ho sebelisa konopo kapa mohatla oa mohatla o kentsoeng yuniti ea bethe (ho hula ka phoso mohatla oa mohala o hlahisa mohala o nang le letšoao la phoso);
- ka ho hula siling;
- e hlahisoang ke phetoho ea boemo ba tlhahlobo ea tlhahlobo (bakeng sa mohlalaample ho tloha thepa ea electromedical e lemohang phoso kapa boemo bo tebileng ba mokuli).
Sesupo sa ho ba teng.
Basebeletsi ba kenang ka phapusing ka mor'a ho letsetsa kapa bakeng sa tlhahlobo e bonolo, bontša boteng ba bona ka ho tobetsa konopo e tala
(D) mojulung oa ponts'o kapa konopo ea reset 14504.AB. Likamore tsohle tse nang le mojule oa ponts'o e nang le sesupo sa boteng li tla fumana mehala ho tsoa likamoreng tse ling ka wateng 'me basebetsi ba tla khona ho fana ka thuso e hlokahalang hang-hang.
Ho araba mehala.
Nako le nako ha mohala o tsoa likamoreng tsa wate basebetsi ba kena ka phaposing 'me ba bontša boteng ba bona ka ho tobetsa konopo e tala (D).
BOHLOKOA:
Mehala e fumanehang marang-rang e ka etsoa ka mefuta e mene e fapaneng ea maemo ho latela boemo bo mahlonoko ba boemo:
- Tloaelehileng: maemong a phomolo tobetsa konopo ea mohala o mofubelu (C) kapa 14501.AB kapa moeta-pele oa mohala o hokahaneng le 14342.AB kapa 14503.AB (call ea kamore ea ho hlapela).
- Thuso: e nang le basebetsi ba teng ka phaposing (ba fihlang kamora mohala o Tlwaelehileng mme ba tobetse konopo ya sesupo sa boteng ba botala (D)) konopo e khubelu (C) kapa 14501.
AB kapa mohala o hokahaneng le 14342.AB kapa mohala oa kamore ea ho hlapela 14503.AB o hatisitsoe. - Boemo ba Tšohanyetso: le basebetsi ba teng ka phapusing (ka hona kamora ho tobetsa konopo (D)) konopo e putsoa e lefifi
(B) e hatelloa mme e bolokoa e hatelloa nako e ka bang 3 s; pitso ea mofuta ona e etsoa maemong a tebileng haholo a hlokang thuso ea bongaka hanghang.
Mohala oa tšohanyetso o ka etsoa ka mekhoa e latelang: - Konopo 14501.AB (3 sec) e kenyellelitsoeng pele (konopo). (D)); - Mohatla o etellang pele oa mohala oa mohala o hokahaneng le 14342.AB (3 sec) e nang le boteng bo kentsoeng pele (konopo (D)); - ho hula siling; 14503.AB (3 sec) ka boteng ba konopo e kentsoeng pele 14504. AB.
Li-LED tsa likonopo tse hlahisang lebone la mohala oa tšohanyetso. - Tlhahlobo: haeba tlhahiso ea ho hlahloba e fetola boemo, tsamaiso e hlahisa alamo ea tekheniki (boemo bo sa tloaelehang kapa bo mahlonoko ba mokuli). Maemo a fapaneng a mohala le ts'ebetso ea Diagnostics li fumaneha inthaneteng le ho VDE-0834.
TLHOKOMELO LEBAKA.
Ha a qala ho fapoha ka sesebediswa lokela ho configured ka letsoho, ka ho latela tlhophiso ka habonolo fetoloa ka lenaneo Call-tsela inehetseng kapa ka letsoho. Ts'ebetso ea tlhophiso e lumella ho kenyelletsa li-parameter tse hlokahalang ho sebetsa hantle.
MOEKETSI TS'ELISO.
Ho phethahatsa mofuta ona oa ts'ebetso hoa hlokahala ho hokahanya mochine oa pontšo 02081. AB.
Ka ponts'o maemong a ho phomola (ha ho na mehala, boteng, lentsoe, joalo-joalo), tobetsa konopo e putsoa ho feta 3 s. (B) ho fihlela ho benya ha 'mala o moputsoa o fapaneng; ebe, ha u ntse u tšoere konopo e putsoa (B) tobetsa ho feta 3s konopo e mosehla 
(A) ho fihlela terminal e kena karolong ea tlhophiso mme ponts'o e bonts'a ntlafatso ea firmware bakeng sa 3 s. Bakeng sa mohlalaampLe:
moo 05 le 'letsatsi, likhoeli tse 02, 14 linomoro tse peli tsa ho qetela tsa selemo sa 01 le mofuta oa firmware.
Ho sebelisa botala (D) le khubelu (C) likonopo, beha nomoro ea lebatooa pakeng tsa 01 le 99 (konopo (C) 
fokotseha, konopo (D) eketsa) mme o netefatse ka ho tobetsa konopo e tshehla (A).
Ha u tobetse, likonopo li eketsa/fokotsa ka potlako palo ea mafapha.
Ho sebelisa botala (D) le khubelu (C) likonopo, beha nomoro ea kamore pakeng tsa 01 ho ea ho 99 le pakeng tsa B0 le B9 (konopo (C) fokotseha, konopo (D) eketsa) mme o netefatse ka ho tobetsa konopo e tshehla (A). Ha u tobetse, likonopo li eketsa/ fokotsa ka potlako palo ea kamore.
Haeba kamore e hlophisitsoe lipakeng tsa 1 le 99, tlhophiso ea ho kenya e fetoha ea kamehla: Bed 1, Bed 2, Bed 3, Bathroom, Hlakola Bathroom, kapa Reset (ho ipapisitse le litlhophiso tse latelang). Haeba kamore e hlophisitsoe pakeng tsa B0 le B9, tlhophiso ea ho kenya e fetoha, ka ho sa feleng: Kamore ea 1, Khabini ea 2, Khabini ea 3, Khabini ea 4, Reset.
Ho sebelisa botala (D) le khubelu (C) likonopo, beha hore na terminal ke ea taolo (konopo (C) che, konopo (D) e) mme o netefatse ka ho tobetsa konopo e tshehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, ho seta mokhoa oa ho kenya (NO, NC, le ba holofetseng): - ka ho tobetsa konopo khafetsa. (C) ba khethoa ka cyclically inputs Ab1, Ab2, Ab3, Ab4, Ab5; – ka ho toboketsa konopo kgafetsa (D) ba khethiloe ka mokhoa oa cyclically NO, NC le - (e holofetse). Qetellong, netefatsa ka ho tobetsa konopo e mosehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, hore na ho tlaleha phoso kapa che ho tse kentsoeng ( nolofalletsa / tima mohala oa tokollo ea ho lemoha).
– tobetsa konopo (C) e tla fetola pontšo:
– ka ho toboketsa konopo kgafetsa (C) li khethiloe ka cyclically inputs In1, In2, In3, In4, In5.
– ho tobetsa konopo (D) e fetoha lipakeng tsa SI (YES) le che (SI hlokomoloha tokollo mohatla pitso, che not innore release tail call) Qetellong, tiisa ka ho tobetsa konopo e mosehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, hore na ho tlaleha phoso kapa che ho lamps (nomella/thibela phoso ea ho sibolla lamp).
– tobetsa konopo (C) e tla fetola pontšo:
– ka ho toboketsa konopo kgafetsa (C) ba khethoa ka cyclically lamps LP1, LP2, LP3, LP4.
– ho tobetsa konopo (D) e fetoha lipakeng tsa SI (YES) le che (SI iphapanyetsa phoso lamp, che ho se iphapanyetse phoso lamp). Qetellong, netefatsa ka ho tobetsa konopo e mosehla (A).
Sebelisa botala (D) le khubelu (C) likonopo ho seta hore na ho ka nolofalletsa tšebetso ea "CANCEL BATHROOM" (konopo (C) che, konopo (D) SI):
HLOKOMELA: Haeba kamore e ne e thehiloe pakeng tsa B0 le B9 ntlha ena e siiloe.
- Ka ho khetha Anb=SI mohala oa kamore ea ho hlapela o ka beoa RESET feela ka konopo ea ho hlakola (art. 14504. AB) e hoketsoeng ho kenyelletso ea WCR ea module ea ponts'o ea terminal ea puisano 02080. AB.
- Ka ho khetha Anb=NO mohala oa kamore ea ho hlapela o ka hlakisoa ka konopo ea ho hlakola (art. 14504. AB) kapa ka konopo e tala. (D) ea pontšo ea module ea pontšo 02081. AB.
Boemong ba eona ba kamehla, ts'ebetso ea CANCEL BATHROOM e laetsoe.
Ho sebelisa botala (D) le khubelu (C) dikonopo, beha hore na ho nolofalletsa tala konopo (D) (konopo (C) ha e sebetse, konopo (D) enabled) mme o netefatse ka ho tobetsa konopo e tshehla (A).
NB ntlha ena e siiloe haeba lentsoe le hlakola boemo ba kamore ea ho hlapela ke SI; haeba u nolofalitse khetho ena, ho bolela hore konopo e tala hoa hlokahala ho seta mohala oa Kamore le Bed hape, ka hona, E KA SE emisoa. Ha konopo e tala (D) e holofetse, mehala (kamore / bethe le ntloana) e seta bocha ka konopo ea ho hlakola mohala oa kamore ea ho hlapela (art. 14504. AB) e hokahaneng le tlhahiso ea WCR ea mojule oa ponts'o ea terminal ea puisano 02080. AB.
Ho sebelisa botala (D) le khubelu (C) likonopo, ho seta mokhoa oa ho kenya (NO, NC, le ba holofetseng): bophahamo ba molumo oa lentsoe VDE-0834 pakeng tsa 0 le 15 (konopo (C) fokotseha, konopo (D) eketsa) mme o netefatse ka ho tobetsa konopo e tshehla (A).
Sebelisa botala (D) le khubelu (C) likonopo, ho seta mokhoa oa puisano oa molumo ka ho khetha pakeng tsa Push to talk Pt kapa Hand-free HF (konopo). (C) Pt, konopo (D)HF) 'me u netefatse ka ho tobetsa konopo e mosehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, beha pheletso ea mohala ka mor'a puisano ea lentsoe (konopo (C) che, konopo (D) YES) mme o netefatse ka ho tobetsa konopo e tshehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, ho beha haeba, ha ho ka ba le ho tima, kapa che, ho thusa ho tsosolosa mehala ea bona (konopo). (C) che, konopo (D) SI) mme o netefatse ka ho tobetsa konopo e tshehla(A).
Sebelisa botala (D) le khubelu (C) likonopo, ho beha morethetho o fapaneng oa mokhoa oa buzzer ho khetha pakeng tsa tr ea setso le VDE Ud (konopo). (C) tr, konopo (D) Ud) 'me u netefatse ka ho tobetsa konopo e mosehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, ho beha lamp mokhoa oa ts'ebetso ho khetha pakeng tsa VDE Ud le tr ea setso (konopo (C) tr, konopo (D) Ud) 'me u netefatse ka ho tobetsa konopo e mosehla (A).
Ho sebelisa botala (D) le khubelu (C) likonopo, ho beha mokhoa oa ts'ebetso ea mehala ho khetha pakeng tsa VDE Ud le tr ea setso (konopo (C) tr, konopo (D) Ud) 'me u netefatse ka ho tobetsa konopo e mosehla (A).
Ho sebelisa botala (D) le khubelu (C), li-pushbuttons, beha hore na u ka kenya lets'oao la "Tail call lead unhooked" (konopo). (C) SI, konopo (D) che), 'me u tiise ka ho tobetsa konopo e mosehla (A).
Tlhophiso e se e phethetsoe mme mojule oa ponts'o oa sebetsa.
KEKELO MELAO.
Ho kenngoa ho lokela ho etsoa ke basebeletsi ba tšoanelehang ho latela melao ea hona joale mabapi le ho kenngoa ha thepa ea motlakase naheng eo lihlahisoa li kenngoa ho eona.
Bolelele ba ho kenya bo khothalelitsoeng: ho tloha ho 1.5 m ho isa ho 1.7 m.
TUMELO.
Taelo ea EMC.
Maemo a EN 60950-1, EN 61000-6-1, EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 - Art.33. Sehlahisoa se ka ba le mesaletsa ea loto.
WEEE - Boitsebiso bakeng sa basebelisi
Haeba letshwao la moqomo o phethilweng le hlaha sesebedisweng kapa sephuthelong, sena se bolela hore sehlahiswa ha se a tlameha ho kenyeletswa le ditshila tse ding tse akaretsang qetellong ya bophelo ba sona ba ho sebetsa. Mosebelisi o tlameha ho isa sehlahisoa se tsofetseng sebakeng se hlophisitsoeng sa litšila, kapa a se khutlisetse ho morekisi ha a reka se secha. Lihlahisoa tse lahloang li ka romelloa mahala (ntle le boitlamo leha e le bofe bo bocha ba ho reka) ho barekisi ba nang le sebaka sa thekiso sa bonyane 400 m² haeba tekanyo e ka tlase ho 25 cm. Pokello ea lithōle e hlophisitsoeng hantle bakeng sa ho lahlela sesebediswa se seng se sebelitse hampe, kapa ho e sebelisa hape, e thusa ho qoba litlamorao tse mpe tse ka bang teng tikolohong le maphelong a batho le ho khothaletsa tšebeliso le/kapa ho sebelisoa bocha ha thepa ea kaho.
Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
49400662B0 01 2103
Litokomane / Lisebelisoa
 |
VIMAR 02081.AB Pontšo ea Module bakeng sa ho Hlahisa Mehala [pdf] Buka ea Taelo 02081.AB, Pontšo ea Mojule bakeng sa ho Hlahisa Mehala, 02081.AB Pontšo ea Mojule bakeng sa ho Hlahisa Mehala |
