BTC-9090 Fuzzy Logic Micro Processor dabeere na njikwa
Akwụkwọ ntuziaka

Okwu mmalite

Akwụkwọ ntuziaka a nwere ozi maka nrụnye na ịrụ ọrụ nke ụdị Brainchild BTC-9090 Fuzzy Logic micro-processor based controller.
The Fuzzy Logic bụ akụkụ dị mkpa nke njikwa ihe niile. Ọ bụ ezie na ụlọ ọrụ anabatala njikwa PID n'ọtụtụ ebe, mana ọ na-esiri ike njikwa PID iji ụfọdụ sistemụ ọkaibe rụọ ọrụ nke ọma, maka ex.amples usoro nke abụọ n'usoro, ogologo oge-lag, dị iche iche setịpụrụ ihe, dị iche iche ibu, wdg N'ihi mweputage nke ụkpụrụ njikwa na ụkpụrụ edozi nke njikwa PID, ọ naghị arụ ọrụ nke ọma ijikwa usoro ndị nwere ọtụtụ ụdị dị iche iche, na nsonaazụ ya bụ ihe na-akụda mmụọ maka ụfọdụ usoro. The fuzzy Logic jikwaa imeri ihe ọghọmtage nke njikwa PID, ọ na-achịkwa usoro ahụ n'ụzọ dị irè site na ahụmahụ ọ nwere na mbụ. Ọrụ nke Fuzzy Logic bụ ịgbanwe ụkpụrụ PID n'ụzọ na-apụtaghị ìhè iji mee ka uru nrụpụta nrụpụta MV gbanwee n'ụzọ dị mfe ma na-agbanwe ngwa ngwa na usoro dị iche iche. Site n'ụzọ dị otu a, ọ na-enyere usoro aka iru ebe a kara aka n'ime obere oge na-eji opekempe karịa n'oge ngbanwe ma ọ bụ ọgba aghara mpụga. Dị iche na njikwa PID nwere ozi dijitalụ, Fuzzy Logic bụ njikwa nwere ozi asụsụ.

Na mgbakwunye, ngwá ọrụ a nwere ọrụ nke otu stageeamp na ibi, auto-tunung na ntuziaka ogbugbu mode. Ọ dị mfe iji bụkwa ihe dị mkpa na ya.

Sistemụ Ngụgụ

Ụdị No. (1) Ntinye ike

4	90-264VAC
5	20-32VAC/VDC
9	Ndị ọzọ

(2) Ntinye nrịbama
1 0 – 5V 3 PT100 DIN 5 TC 7 0 – 20mA 8 0 – 10V
(3) Koodu mpaghara

1	Enwere ike ịhazi ya
9	Ndị ọzọ

(4) Ọnọdụ njikwa

3	Njikwa PID / Gbanyụọ

(5) Mpụta 1 Nhọrọ

0	Ọ dịghị
1	Relay gosiri 2A/240VAC mgbochi
2	SSR Drive nyere 20mA/24V
3	4-20mA linear, max. Ibu 500 ohms (Modul OM93-1)
4	0-20mA linear, max. Ibu 500 ohms (Modul OM93-2)
5	0-10V ahịrị ahịrị, min. impedance 500K ohms (Modul OM93-3)
9	Ndị ọzọ

(6) Mpụta 2 Nhọrọ

0

Ọ dịghị

(7) Nhọrọ mkpu

0	Ọ dịghị
1	Relay gosiri 2A/240VAC mgbochi
9	Ndị ọzọ

(8) Nzikọrịta ozi

0

Ọ dịghị

Nkọwa nke panel dị n'ihu
ONYE NTỊTA NA EZIOKWU

IN	Sensọ	Ụdị ntinye	Mpaghara (BC)	Izi ezi
0	J	Iron-Constantan	-50 ruo 999 BC	A2 BC
1	K	Chromel-Alumel	-50 ruo 1370 BC	A2 BC
2	T	Ọla kọpa-Constantan	-270 ruo 400 BC	A2 BC
3	E	Chromel-Constantan	-50 ruo 750 BC	A2 BC
4	B	Pt30% RH/Pt6% RH	300 ruo 1800 BC	A3 BC
5	R	Pt13% RH/Pt	0 ruo 1750 BC	A2 BC
6	S	Pt10% RH/Pt	0 ruo 1750 BC	A2 BC
7	N	Nicrosil - osisi	-50 ruo 1300 BC	A2 BC
8	RTD	PT100 ohms (DIN)	-200 ruo 400 BC	A0.4 BC
9	RTD	PT100 ohms (JIS)	-200 ruo 400 BC	A0.4 BC
10	Linear	-10mV ka 60mV	-1999 ruo 9999	A0.05%

Nkọwapụta

Ntinye

Thermocouple (T/C):	ụdị J, K, T, E, B, R, S, N.
RTD:	PT100 ohm RTD (DIN 43760/BS1904 ma ọ bụ JIS)
Linear:	-10 ruo 60 mV, ntinye ntinye ahazi
Oke:	Enwere ike ịhazi onye ọrụ, rụtụ aka na Tebụl dị n'elu
izi ezi:	Rụtụ aka na Tebụl dị n'elu
Nkwụghachi ụgwọ nkwụsị oyi:	0.1 BC/BC ambient ahụkarị
Nchedo nkwụsịtụ ihe mmetụta:	Enwere ike ịhazi ọnọdụ nchekwa
Nguzogide Mpụga:	100 ohms max.
Ọjụjụ Ụdị Ọdịmma:	60 dB
Ọjụjụ Ụdị nkịtị:	120dB
Sample Ọnụ:	3 ugboro / sekọnd

njikwa

Oke Band:	0 - 200 BC ( 0-360BF)
Tọgharia (Mgbakwunye):	0 - 3600 sekọnd
Ọnụọgụgụ (Ihe ewepụtara):	0 - 1000 sekọnd
Ramp Ọnụego:	0 - 200.0 BC / nkeji (0 - 360.0 BF / nkeji)
biri:	0 - 3600 nkeji
Gbanyụọ:	Site na hysteresis nwere ike idozi (0-20% nke SPAN)
Oge okirikiri:	0-120 sekọnd
Omume njikwa:	Direct (maka jụrụ) na tụgharịa (maka kpo oku)
IKE	90-264VAC, 50/60Hz 10VA 20-32VDC/VAC, 50/60Hz 10VA

Gburugburu Ebe obibi & Ahụ

Nchekwa:	UL 61010-1, mbipụta nke atọ. CAN/CSA-C22.2 No. 61010-1(2012-05), Mbipụta nke atọ.
Mgbapụta EMC:	EN50081-1
Mgbochi EMC:	EN50082-2
Okpomọkụ arụ ọrụ:	-10 ruo 50 BC
iru mmiri:	0 ruo 90% RH (anaghị etinye koodu)
Ihe mkpuchi:	20M ohms min. (500 VDC)
Gbarie:	AC 2000V, 50/60 Hz, 1 nkeji
Mmaji:	10-55 Hz; ampogologo nke 1 mm
Ujo:	200m/s (20g)
Nha ịbụ:	170 grams
Ngwa ụlọ:	Poly-Carbonate Plastic
Elu:	Ihe na-erughị 2000 m
Eji ime ụlọ
Mfefetage ngalaba	II
ogo mmetọ:	2
Mgbanwe Voltae Ntinye Ike:	10% nke ọnụ ọgụgụ voltage

Ịwụnye

6.1 Akụkụ & MKPEREEserese WIRING 6.2

AKWALKWỌ
Mara: Agaghị n'ihu na ngalaba a ma ọ bụrụ na ha bụ ezigbo mkpa ịmegharị onye njikwa ahụ. Ụbọchị mmezi niile gara aga ga-efunahụ ya. Anwala regharịa ọ gwụla ma inwere akụrụngwa mmezi kwesịrị ekwesị. Ọ bụrụ na data nhazigharị efunahụ, ị ​​ga-achọ iweghachite onye njikwa ahụ n'aka onye na-ebubata gị onye nwere ike itinye ụgwọ maka nhazigharị.
Tupu nhazigharị, hụ na ntọala paramita niile ziri ezi (ụdị ntinye, C / F, mkpebi, oke dị ala, oke dị elu).

1. Wepu wiwi ntinye ihe mmetụta ma jikọọ simulator ndenye ọkọlọtọ nke ụdị ziri ezi na ntinye njikwa. Nyochaa polarity ziri ezi. Tọọ mgbaama emepụtara ka ọ dabara na mgbama usoro dị ala (dịka ogo efu).
2. Jiri igodo mpịakọta ruo mgbe " ” pụtara na Ngosipụta PV. (Tụtụ aka na 8.2)
3. Jiri igodo elu na ala ruo mgbe Ngosipụta PV na-anọchite anya ntinye emepụtara.
4. Pịa igodo nlọghachi ma ọ dịkarịa ala 6 sekọnd (kachasị sekọnd 16), wee hapụ ya. Nke a na-abanye n'ọnụ ọgụgụ ngbanwe dị ala n'ime ebe nchekwa na-adịghị agbanwe agbanwe nke njikwa.
5. Pịa ma hapụ igodo mpịakọta. ” " na-egosi na Ngosipụta PV. Nke a na-egosi ebe nhazi dị elu.
6. Mee ka mgbaama ntinye emepụtara ka ọ dakọọ na mgbama usoro 11 dị elu (dịka ogo 100).
7. Jiri igodo elu na ala ruo mgbe Ngosipụta SV na-anọchite anya ntinye dị elu emepụtara.
8. Pịa igodo nlọghachi ma ọ dịkarịa ala 6 sekọnd (kachasị sekọnd 16), wee hapụ ya. Nke a na-abanye n'ọnụọgụ nhazi dị elu n'ime ebe nchekwa na-adịghị agbanwe agbanwe nke njikwa.
9. Gbanyụọ unit ahụ, wepụ ihe nlele niile wee dochie wiwi sensọ (na-elele polarity).

Ọrụ

8.1 Arụmọrụ igodo
* Na-agbanye ọkụ, ọ ga-echere 12 sekọnd iji buru ụkpụrụ nke paramita ọhụrụ n'isi ozugbo agbanwere ya.

OKWU emetụ aka	Ọrụ	Nkọwa
	Pịgharịa igodo	Bugharịa ihe ngosi index gaa n'ọnọdụ achọrọ. Index na-aga n'ihu na cycl site na ịpị igodo a.
	Elu Elu	Na-abawanye oke
	Igodo nke ala	Na-ebelata oke
	Laghachi Key	Na-atọgharịa njikwa ahụ ka ọ bụrụ ọkwa nkịtị. Ọ na-akwụsịkwa mmezi akpaaka, pasentị mmepụtatage nlekota na ntuziaka mode ọrụ.
Pịa maka 6 sekọnd	Pịgharịa ogologo	Na-enye ohere ka ịlele ma ọ bụ gbanwee ọtụtụ paramita.
Pịa  maka 6 sekọnd	Ogologo nloghachi	1. Na-arụ ọrụ nhazi akpaaka 2. Calibrates akara mgbe ọ nọ na nhazi ọkwa
Pịa na	Percen mmepụtatage Nyochaa	Na-enye ohere ngosi ebe atọrọ ka ọ gosipụta uru njikwa njikwa.
Pịa na  maka 6 sekọnd	Emume Usoro ntuziaka	Na-enye onye njikwa ohere ịbanye ụkpụrụ ntuziaka.

8.2 ỤFỌDỤ ỤWAEnwere ike ịpị igodo "nlaghachi" n'oge ọ bụla.
Nke a ga-eme ka ngosi ahụ laghachi na uru Usoro/Nhazi ọnụ ahịa.
Ike etinyere:

1. Egosipụtara maka sekọnd 4. (Ụdị Software 3.6 ma ọ bụ karịa)
2. Nnwale LED. A ga-amụnye akụkụ LED niile maka sekọnd 4.
3. Egosiri uru usoro yana ebe atọrọ.

8.3 Nkọwa PARAMETER

KỌDỤ NDỊ NDỊ MMADỤ	NKWUKWU NKWUKWU NKWUKWU	** Ntọala ndabara
SV	Tọọ njikwa uru * Obere oke na uru oke oke	Enweghị nkọwa
	Oti mkpu Ntọọ ọnụ ahịa * Obere oke na oke oke Value. if  = 0, 1, 4 ma ọ bụ 5) * 0 ruo 3600 nkeji (ọ bụrụ  = 12 ma ọ bụ 13) * Obere oke minus tọọ isi ka ọ bụrụ oke oke mwepu uru ihe setịpụrụ (ma ọ bụrụ              = 2, 3, 6 ruo 11 )	200 BC
	Ramp Ọnụego maka uru usoro iji gbochie mgbanwe mgbanwe nke usoro (Soft Start) * 0 ruo 200.0 BC (360.0 BF) / nkeji (ọ bụrụ    = 0 ruo 9) * 0 ruo 3600 nkeji / nkeji (ọ bụrụ  =10)	0 BC / min.
	Uru akwụ ụgwọ maka nrụpụta akwụkwọ ntuziaka (ọ bụrụ  = 0) * 0 ruo 100%	0.0%
	Mgbanwe mgbanwe maka uru usoro * -111 BC ruo n’afọ 111 tutu amụọ Kraịst	0 BC
	Oke Band * 0 ruo 200 BC (ka edobere na 0 maka njikwa na-apụ apụ)	10 BC
	Oge ntinye (Tọgharia). * 0 ruo 3600 sekọnd	120 sk.
	Oge mmepụta (ọnụego). * 0 ruo 360.0 sekọnd	30 sk.
	Ụdị mpaghara 0: Enweghị akara njikwa nwere ike ịgbanwe 1: Enwere ike ịgbanwe paramita njikwa	1
	Nhọrọ paramita (na-enye ohere ịhọrọ paramita ndị ọzọ ka enwere ike ịnweta na nchekwa ọkwa 0)	0
	Oge okirikiri nha nhata * 0 ruo 120 sekọnd	Ntugharị		20
		Pulsed Voltage		1
		Linear volt/mA		0
	Nhọrọ Ụdị ntinye 0: J ụdị T/C 6: S ụdị T/C 1: K ụdị T/C 7: N ụdị T/C 2: T ụdị T/C 8: PT100 DIN 3: E ụdị T/C 9: PT100 JIS 4: Ụdị B ụdị T/C 10: Linear Voltage ma ọ bụ ugbu a 5: R ụdị T/C Cheta na: T/C-Mechie oghere nchacha G5, RTD-Open G5	T/C	0
		RTD	8
		Linear	10
	Nhọrọ ọnọdụ mkpu 0: Usoro oti mkpu dị elu 8: Oti mkpu na mpụga 1: Hazie mkpu dị ala 9: Mkpu inband 2: Ngbanwe Elu Alarm 10: Na-egbochi Mpụpụ Mpụga 3: Ngbanwe Oti mkpu dị ala 11: Na-egbochi Mkpu mkpuchi 4: Mgbochi Usoro Elu mkpu 12: Mgbasa Mkpu dị ka 5: Na-egbochi Usoro Oti mkpu dị ala Oge ezumike 6: Na-egbochi ngbanwe dị elu 13: Oti mkpu na-agbagharị dị ka 7: Na-egbochi Ngbanwe Okirikiri Dị Okpukpe Dị Ala Oge Ọpụpụ	0
	Hysteresis nke mkpu 1 * 0 ruo 20% nke SPAN	0.5%
	Nhọrọ BC/BF 0: BF, 1: BC	1
	Nhọrọ mkpebi 0: Enweghị ntụpọ ntụpọ 2: 2 ọnụọgụgụ ọnụọgụgụ 1: 1 ọnụọgụgụ ọnụọgụgụ 3: 3 ọnụọgụgụ ọnụọgụgụ Enwere ike iji 2 & 3 naanị maka voltage ma ọ bụ ugbu a    =10)	0
	Omume njikwa 0: Direct (Cooling) Omume 1: Agbanwe (Okpomọkụ) Omume	1
	Nchekwa mperi 0: Gbanyụọ, Oti mkpu 2: Njikwa, Mkpuchi 1: Gbanyụọ, Oti mkpu na 3: Njikwa ON, Mkpuchi ON	1
	Hysteresis maka njikwa ON/ Gbanyụọ * 0 ruo 20% nke SPAN	0.5%
	Obere oke nke oke	-50 BC
	Oke oke nke oke	1000 BC
	Ọnụọgụ nhazi dị ala	0 BC
	Ọnụ ọgụgụ nhazi dị elu	800 BC

IHE: * Na-edozi oke nke Parameter
** Ntọala ụlọ ọrụ. Oti mkpu usoro dị n'ebe okpomọkụ edobere. Oti mkpu ngbanwe na-eji uru ntụpọ edobere.
8.4 NKWUKWU akpaghị aka

1. Gbaa mbọ hụ na ahaziri ma tinye onye njikwa nke ọma.
2. Gbaa mbọ hụ na edobeghị oke band 'Pb' na '0'.
3. Pịa igodo nloghachi maka opekata mpe 6 sekọnd ( kacha 16 sekọnd). Nke a na-ebute ọrụ-emegharị onwe ya. (Iji kwusi usoro ntugharị akpaaka pịa igodo laghachi azụ wee hapụ ya).
4. Ebe ntụpọ dị n'akụkụ aka nri ala nke ihe ngosi PV na-egbuke egbuke iji gosi na-emegharị akpaaka na-aga n'ihu. Ntugharị akpaaka na-ezu oke mgbe ọkụ kwụsịrị.
5. Dabere na usoro a, nlegharị anya akpaka nwere ike were ihe ruru awa abụọ. Usoro nwere ogologo oge ga-ewe ogologo oge iji gụgharịa. Cheta, mgbe ebe ngosi na-enwu, onye njikwa na-emegharị onwe ya.

IHE: Ọ bụrụ na njehie AT ( ) emee, a na-ewepụ usoro ngbanwe akpaaka n'ihi sistemụ na-arụ ọrụ na njikwa ON-OFF (PB=0).
A ga-ewepụkwa usoro a ma ọ bụrụ na edobere ebe a ga-emechi na ọnọdụ okpomọkụ nke usoro ma ọ bụ ọ bụrụ na enweghị ikike zuru oke na usoro iji ruo ebe a na-edepụta (dịka ọmụmaatụ ike ikpo ọkụ ezughị ezu). Mgbe emechara akpaaka, a ga-abanye n'ime ebe nchekwa na-adịghị agbanwe agbanwe nke onye njikwa ntọala PID ọhụrụ.
8.5 Mgbanwe PID akwụkwọ ntuziaka
Ọ bụ ezie na ọrụ ngbanwe akpaaka na-ahọrọ ntọala njikwa nke kwesịrị igosi afọ ojuju maka ọtụtụ usoro, ị nwere ike ịhụ na ọ dị mkpa ime mgbanwe na ntọala ndị a aka ike site n'oge ruo n'oge. Nke a nwere ike ịbụ ikpe ma ọ bụrụ na emere mgbanwe ụfọdụ na usoro a ma ọ bụ ọ bụrụ na ịchọrọ 'ịma mma' ntọala njikwa.
Ọ dị mkpa na tupu ịme mgbanwe na ntọala njikwa na ị dekọọ ntọala dị ugbu a maka ntụle aka n'ọdịnihu. Mee ntakịrị mgbanwe na naanị otu ntọala n'otu oge wee hụ nsonaazụ na usoro a. N'ihi na ntọala nke ọ bụla na-emekọrịta ihe na ibe ya, ọ dị mfe inwe mgbagwoju anya na nsonaazụ ya ma ọ bụrụ na ị maghị usoro njikwa usoro.
Ntụzigharị Ntụgharị
Oke Band

Mgbaàmà	Ngwọta
Nzaghachi nwayọ	Belata Uru PB
High Overshoot ma ọ bụ Oscillations	Mụbaa uru PB

Oge mmekọ (Tọgharia)

Mgbaàmà	Ngwọta
Nzaghachi nwayọ	Belata Oge Mmekọ
Enweghi ike ma ọ bụ Oscillations	Mụbaa Oge Mmekọ

Oge mwepụta (ọnụego)

Mgbaàmà	Ngwọta
Nzaghachi ngwa ngwa ma ọ bụ oscillations	Wedata Deriv. Oge
Ihe karịrị oke	Dịkwuo Deriv. Oge

8.6 Usoro ngbanwe akwụkwọ ntuziaka
Kwụpụ 1: Gbanwee ụkpụrụ integral na nke ewepụtara na 0. Nke a na-egbochi ọnụego ma tọgharịa omume.
Kwụpụ 2: Tọọ uru aka ike nke bandwit proportional wee nyochaa nsonaazụ njikwa
Kwụpụ 3: Ọ bụrụ na ntọala izizi na-ewebata nnukwu oscillation usoro, wee jiri nwayọọ nwayọọ na-abawanye bandwit ruo mgbe ịnya igwe kwụ ọtọ. Dekọọ ọnụ ahịa nha nha nha a (Pc).
Kwụpụ 4: tụọ oge ịgba ígwè kwụ ọtọDekọọ uru a (Tc) n'ime sekọnd
Kwụpụ 5: A na-ekpebi Ntọala njikwa dị ka ndị a:
Oke Band (PB)=1.7 PC
Oge njikọta (TI) = 0.5 Tc
Oge mmepụta (TD) = 0.125 Tc
8.7 RAMP & OBI
Enwere ike ịhazi onye na-ahụ maka BTC-9090 ka ọ rụọ ọrụ dị ka onye na-ahụ maka ebe edobere ma ọ bụ dị ka otu r.amp njikwa na ike elu. Ọrụ a na-enyere onye ọrụ aka ịtọ r nke eburu ụzọ kpebieamp ọnụego ikwe ka usoro ahụ jiri nwayọọ nwayọọ rute ọnọdụ okpomọkụ, si otú a na-emepụta ọrụ 'Soft Start'.
A na-etinye ngụ oge obibi n'ime BTC-9090 na enwere ike ịhazi relay mkpu iji nye ma ọ bụ ọrụ obibi nke a ga-eji na njikọ r.amp ọrụ.
Ihe ramp a na-ekpebi ọnụego site na ' ' oke nke enwere ike gbanwee na oke 0 ruo 200.0 BC / nkeji. Ihe ramp Agbanyụrụ ọrụ ọnụego mgbe ' ' paramita atọrọ ka '0'.
A na-akwado ọrụ sok site n'ịhazi mmepụta mkpu ka ọ rụọ ọrụ dị ka ngụ oge obibi. The oke kwesịrị ka edobe ya na uru 12. Kọntaktị mkpu ga-arụ ọrụ ugbu a dị ka kọntaktị ngụ oge, na-emechi kọntaktị ahụ na ọkụ na imeghe mgbe oge gafere na njedebe. .
Ọ bụrụ na etinyere ọkụ ma ọ bụ mmepụta onye njikwa site na kọntaktị oti mkpu, onye njikwa ga-arụ ọrụ dị ka onye na-ahụ maka sọk na-ekwe nkwa.

Na example n'okpuru Ramp Edebere ọnụego ka ọ bụrụ 5 BC / nkeji, = 12 na =15 (nkeji). A na-etinye ike n'oge efu na usoro a na-arịgo na 5 BC / nkeji ruo n'ókè nke 125 BC. Mgbe ị rutere n'ebe edoziri, a na-arụ ọrụ ngụ oge obibi ma mgbe oge nkwụsị nke nkeji iri na ise gasịrị, kọntaktị mkpu ga-emeghe, gbanyụọ mmepụta. Okpomọkụ usoro ga-emecha daa na ọnụego achọpụtaghị.Enwere ike iji ọrụ obibi ahụ rụọ ọrụ mpụga ngwaọrụ dị ka siren iji mee ka ọ mara mgbe oge ruru.
mkpa ka ịtọọ ya na uru 13. Kọntaktị oku ga-arụ ọrụ ugbu a dị ka kọntaktị ngụ oge, na-emeghe kọntaktị na mmalite mmalite. Oge ngụ oge na-amalite ịgụta ala ozugbo ọnọdụ ọnọdụ okpomọkụ ruru. Mgbe ntọala at gafechara, kọntaktị oti mkpu na-emechi.
Ozi mperi

Mgbaàmà	Ihe kpatara (s)	Ngwọta (s)
	Njehie nkwụsịtụ sensọ	Dochie RTD ma ọ bụ ihe mmetụta Jiri ọrụ ụkpụrụ ntuziaka
	Ngosipụta usoro gafere ebe ntọala dị ala	Tinyegharịa uru
	Ngosipụta usoro gafere ebe ntọala dị elu	Tinyegharịa uru
	Analog ngwakọ modul mebiri	Dochie modul. Lelee maka mpụga isi iyi mmebi dị ka transient voltage spikes
	Arụ ọrụ ezighi ezi nke usoro ụda akpaaka Prop. Band atọrọ ka 0	Tinyegharịa usoro. Welite Prop. Band na ọnụ ọgụgụ buru ibu karịa 0
	Agaghị anabata ụkpụrụ ntuziaka maka sistemụ njikwa ON-OFF	Dịkwuo mmachi
	Lelee njehie nchikota, ụkpụrụ dị na ebe nchekwa nwere ike gbanwee na mberede	Lelee ma hazigharịa paramita njikwa

Ntuziaka mgbakwunye maka New Version
The unit na firmware version V3.7 nwere abụọ ọzọ parameters - "PVL" na "PVH" dị na larịị 4 dị ka parameters eruba chaatị na n'aka ekpe.
Mgbe ịchọrọ ịgbanwe uru LLit ka ọ bụrụ uru dị elu ma ọ bụ gbanwee uru Hlit ka ọ bụrụ ọnụ ala dị ala, a ga-agbaso usoro iji mee ka uru PVL bụrụ otu ụzọ n'ụzọ iri nke uru LCAL yana PVH alue dakọtara na otu ụzọ n'ụzọ iri nke uru HCAL. Ma ọ bụghị ya, ụkpụrụ usoro atụtara agaghị akọwapụta ya.

1. Jiri igodo mpịakọta ruo mgbe “LLit” pụtara na Ngosipụta PV. Jiri igodo elu na ala ka ịtọ uru LLit ka ọ bụrụ uru dị elu karịa uru mbụ.
2. Pịa ma hapụ igodo mpịakọta ahụ, wee "HLit" pụtara na Ngosipụta PV. Jiri igodo elu na ala ka ịtọ uru Hlit ka ọ bụrụ uru dị ala karịa uru mbụ.
3. Gbanyụọ ike wee gbanye.
4. Jiri igodo mpịakọta ruo mgbe “LCAL” pụtara na Ngosipụta PV. Were ndetu na uru LCAL.
5. Pịa ma hapụ igodo mpịakọta ahụ, mgbe ahụ "HCAL" pụtara na Ngosipụta PV. Were ndetu na uru HCAL.
6. Pịa igodo mpịakọta maka opekata mpe 6 sekọnd wee hapụ ya, “PVL” na-apụta na Ngosipụta PV. Jiri igodo elu na ala ka ịtọ uru PVL ka ọ bụrụ otu ụzọ n'ụzọ iri nke uru LCAL.
7. Pịa ma hapụ igodo mpịakọta, "PVH" na-apụta na Ngosipụta PV. Jiri igodo elu na ala ka ịtọ uru PVH ka ọ bụrụ otu ụzọ n'ụzọ iri nke uru HCAL.

-Biko tinye ihe mgbawa sekit 20A na njedebe ọkọnọ ọkụ
-Iwepu uzuzu biko jiri akwa akọrọ
-Echichi na nchekwa nke usoro ọ bụla na-ejikọta akụrụngwa bụ ọrụ nke onye na-achịkọta usoro ahụ
-Ọ bụrụ na eji ngwá ọrụ eme ihe n'ụzọ na-akọwapụtaghị nke onye nrụpụta, nchebe nke ngwa ahụ nwere ike imebi
Ekpuchila ikuku jụrụ oyi iji nọgide na-erugharị ikuku
Kpachara anya ka ị ghara imechi skru ọnụ ọnụ. The torque ekwesịghị gafere . 1 14 Nm (10 Lb-in ma ọ bụ 11.52 KgF-cm), okpomọkụ Min.60 Celsius, jiri naanị ndị na-eduzi ọla kọpa.
Ewezuga wiwi thermocouple, wiwi niile kwesịrị iji onye na-eduzi ọla kọpa nwere akara kacha 18 AWG.
NKWUKWU
Brainchild Electronic Co., Ltd nwere obi ụtọ inye aro maka iji ngwaahịa ya dị iche iche.
Agbanyeghị, Brainchild anaghị enye akwụkwọ ikike ma ọ bụ ihe nnọchi anya ụdị ọ bụla gbasara ịdị mma maka ojiji, ma ọ bụ ngwa nke onye zụrụ ngwaahịa ya. Nhọrọ, ngwa ma ọ bụ iji ngwaahịa Brainchild bụ ọrụ nke onye zụrụ ya. Agaghị anabata nkwupụta ọ bụla maka mmebi ma ọ bụ mfu ọ bụla, ma ọ bụ kpọmkwem, na-apụtaghị ìhè, nke mberede, pụrụ iche ma ọ bụ ihe ga-esi na ya pụta. Nkọwapụta nwere ike ịgbanwe na-enweghị ọkwa. Na mgbakwunye, Brainchild nwere ikike ime mgbanwe-na-enweghị ọkwa nye ndị na-azụta ihe ma ọ bụ nhazi nke na-adịghị emetụta nrube isi na nkọwapụta ọ bụla dị. Ngwaahịa ụbụrụ nwere ikike inwere onwe ya pụọ ​​na ntụpọ n'ihe yana arụ ọrụ maka ọnwa 18 ka ebugara onye zụrụ ahịa mbụ maka ojiji. Ogologo oge dị ogologo yana ego agbakwunyere mgbe a rịọrọ ya. Ọrụ naanị Brainchild n'okpuru akwụkwọ ikike a, na nhọrọ Brainchild, nwere oke na nnọchi ma ọ bụ rụkwaa, n'efu, ma ọ bụ nkwụghachi ọnụahịa azụrụ n'ime oge ikike akọwapụtara. Akwụkwọ ikike a anaghị emetụta mmebi nke sitere na njem ụgbọ njem, mgbanwe, iji mebie ma ọ bụ mmegbu.
ALAghachi
Enweghị ike ịnakwere nloghachi ngwaahịa na-enweghị akwụkwọ ikike nlọghachi azụ (RMA).
IHE:
Ozi dị n'akwụkwọ ntuziaka onye ọrụ a nwere ike ịgbanwe n'enweghị ọkwa.
Nwebiisinka nke 2023, The Brainchild Electronic Co., Ltd., ikike niile echekwabara. Enweghị akụkụ nke akwụkwọ a nwere ike ịmegharị, bufee, degharịa ma ọ bụ chekwaa ya na sistemụ eweghachi, ma ọ bụ tụgharịa n'asụsụ ọ bụla n'ụdị ọ bụla na-enweghị ikike ederede nke Brainchild Electronic Co., Ltd.

Maka mkpa ndozi ma ọ bụ mmezi ọ bụla, biko kpọtụrụ anyị.
Ụlọ ọrụ Electronic Co., Ltd.
No.209, Chung Yang Rd., Nan Kang Dist.,
Taipei 11573, Taiwan
Tel: 886-2-27861299
Faksị: 886-2-27861395
web saịtị: http://www.brainchildtw.com

Akwụkwọ / akụrụngwa

BrainChild BTC-9090 Fuzzy Logic Micro Processor dabere na njikwa [pdf] Akwụkwọ ntuziaka BTC-9090, BTC-9090 G UL, BTC-9090 Fuzzy Logic Micro Processor dabeere na njikwa, Fuzzy Logic Micro Processor based Controller, Micro Processor Based Controller, Processor Based Controller, Based Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ