BTC-9090 Fuzzy Logic Micro Processor Based Controller
Phau ntawv qhia

Taw qhia

Phau ntawv no muaj cov ntaub ntawv rau kev teeb tsa thiab kev ua haujlwm ntawm Brainchild qauv BTC-9090 Fuzzy Logic micro-processor raws li tus maub los.
Lub Fuzzy Logic yog qhov tseem ceeb ntawm tus tswj hwm ntau yam no. Txawm hais tias PID tswj tau txais dav los ntawm kev lag luam, tab sis nws nyuaj rau PID tswj ua haujlwm nrog qee qhov kev ua haujlwm zoo, rau ex.amples systems ntawm kev txiav txim thib ob, lub sij hawm ntev-lag, ntau yam teeb tsa, ntau yam loads, thiab lwm yam. Vim yog disadvantage ntawm kev tswj cov hauv paus ntsiab lus thiab qhov tseem ceeb ntawm PID tswj, nws tsis muaj txiaj ntsig los tswj cov kab ke nrog ntau ntau yam, thiab qhov tshwm sim yog qhov ua rau muaj kev ntxhov siab rau qee lub tshuab. Lub Fuzzy Logic tswj tau kov yeej lub disadvantage ntawm PID tswj, nws tswj cov kab ke hauv txoj hauv kev ua tau zoo los ntawm kev paub dhau los. Lub luag haujlwm ntawm Fuzzy Logic yog los kho PID qhov tseem ceeb hauv qhov kev txiav txim siab kom ua rau tus nqi tsim tawm MV kho tau yooj yim thiab hloov kho sai rau ntau yam txheej txheem. Los ntawm txoj kev no, nws tso cai rau tus txheej txheem kom ncav cuag nws qhov kev teeb tsa tau teem tseg hauv lub sijhawm luv tshaj plaws nrog qhov tsawg kawg nkaus overshooting thaum kho lossis cuam tshuam sab nraud. Sib txawv ntawm PID tswj nrog cov ntaub ntawv digital, Fuzzy Logic yog kev tswj nrog cov lus qhia.

Tsis tas li ntawd, qhov ntsuas no muaj cov haujlwm ntawm ib leegtaguaamp thiab nyob, nws pib-tunung thiab phau ntawv hom tua. Kev yooj yim ntawm kev siv kuj yog ib qho tseem ceeb feature nrog nws.

NUMBERING SYSTEM

Qauv No. (1) Lub zog nkag

4	90-264VAC
5	20-32VAC / VDC
9	Lwm yam

(2) Lub teeb liab nkag
1 - 0V 5 PT3 DIN 100 TC 5 7 - 0mA 20 8 - 0V
(3) Kab Code

1	Configurable
9	Lwm yam

(4) Tswj hom

3	PID / ON-OFF Control

(5) Tso zis 1 Option

0	Tsis muaj
1	Relay ntsuas 2A / 240VAC resistive
2	SSR Drive ntsuas 20mA / 24V
3	4-20mA linear, max. load 500 ohms (Module OM93-1)
4	0-20mA linear, max. load 500 ohms (Module OM93-2)
5	0-10V linear, min. impedance 500K ohms (Module OM93-3)
9	Lwm yam

(6) Tso zis 2 Option

0

Tsis muaj

(7) Tswb Option

0	Tsis muaj
1	Relay ntsuas 2A / 240VAC resistive
9	Lwm yam

(8) Kev sib txuas lus

0

Tsis muaj

HAUJ LWM PANEL Piav Qhia
INPU RANGE & ACCURACY

IN	Sensor	Hom tswv yim	Ntau yam (BC)	Qhov tseeb
0	J	Hlau-Constantan	-50 rau 999 BC	A2 BC
1	K	Chromel-Alumel	-50 rau 1370 BC	A2 BC
2	T	Tooj-Constantan	-270 rau 400 BC	A2 BC
3	E	Chromel-Constantan	-50 rau 750 BC	A2 BC
4	B	Pt30%RH/Pt6%RH	300 txog 1800 BC	A3 BC
5	R	Pt13%RH/Pt	0 txog 1750 BC	A2 BC
6	S	Pt10%RH/Pt	0 txog 1750 BC	A2 BC
7	N	Nicrosil-Nisil	-50 rau 1300 BC	A2 BC
8	RTD	PT 100 ohms (DIN)	-200 rau 400 BC	A0.4 BC
9	RTD	PT 100 ohms (JIS)	-200 rau 400 BC	A0.4 BC
10	Tawm	-10mV txog 60mV	-1999 rau 9999	A0.05%

SPECIFICATIONS

NYIAJ

Thermocouple (T / C):	hom J, K, T, E, B, R, S, N.
RTD:	PT100 ohm RTD (DIN 43760 / BS1904 los yog JIS)
Linear:	-10 mus rau 60 mV, configurable input attenuation
Ntau yam:	User configurable, xa mus rau Table saum toj no
Qhov tseeb:	Xa mus rau Table saum toj no
Cold Junction Compensation:	0.1 BC / BC ambient raug
Kev tiv thaiv kev tawg Sensor:	Kev tiv thaiv hom configurable
Sab nraud Resistance:	100 ohms max.
Hom Kev Tsis Txaus Siab:	60dB ua
Hom Kev Tsis Txaus Siab:	120dB ib
SampTus Nqi:	3 zaug / thib ob

Tswj

Band Loj:	0 - 200 BC (0-360BF)
Pib dua (Integral):	0-3600 vib nas this
Tus nqi (Derivative):	0-1000 vib nas this
Ramp Tus nqi:	0 - 200.0 BC / feeb (0 - 360.0 BF / feeb)
Nyob zoo:	0-3600 feeb
ON-OFF:	Nrog adjustable hysteresis (0-20% ntawm SPAN)
Lub Sijhawm Cycle:	0-120 feeb
Tswj Kev Ua Haujlwm:	Direct (rau txias) thiab rov qab (rau cua sov)
Hwj chim	90-264VAC, 50/60Hz 10VA 20-32VDC/VAC, 50/60Hz 10VA

ENVIRONMENTAL & PHYSICAL

Kev nyab xeeb:	UL 61010-1, 3rd Edition. CAN/CSA-C22.2 No. 61010-1(2012-05), 3rd Edition.
EMC Emission:	TS EN 50081-1
EMC Kev Tiv Thaiv:	TS EN 50082-2
Ua haujlwm kub:	-10 rau 50 BC
Humidity:	0 ~ 90% RH (tsis-codens)
Rwb thaiv tsev:	20M ohms yog min. (500 VDC)
Kev tawg:	AC 2000V, 50/60 Hz, 1 feeb
Kev vibration:	10-55 Hz, amploj 1mm
Kev poob siab:	200m / s (20g)
Net Nyhav:	170g ua
Cov ntaub ntawv hauv tsev:	Poly-Carbonate Yas
Qhov siab:	Tsawg dua 2000 m
Siv sab hauv
Overvoltage Qeb	II
Pollution Degree:	2
Fais fab Input Voltae Fluctuations:	10% ntawm nominal voltage

INSTALLATION

6.1 DIMENSIONS & PANEL CUTOUT6.2 KEV PAB CUAM

CALIBRATION
Nco tseg: Tsis txhob mus dhau ntawm ntu no tshwj tsis yog tias lawv yog qhov xav tau tiag tiag kom rov ntsuas tus maub los. Txhua hnub calibration yav dhau los yuav ploj. Tsis txhob sim rov calibration tshwj tsis yog tias koj muaj cov cuab yeej calibration tsim nyog. Yog tias cov ntaub ntawv calibration ploj lawm, koj yuav tsum tau xa rov qab tus maub los rau koj tus neeg muag khoom uas tuaj yeem thov tus nqi rau rov kho dua.
Ua ntej calibration xyuas kom meej tias tag nrho cov kev teeb tsa tsis raug (input type, C / F, kev daws teeb meem, qis ntau, ntau yam).

1. Tshem tawm sensor input thaiv thiab txuas tus qauv input simulator ntawm hom raug rau tus tswj input. Txheeb xyuas qhov tseeb polarity. Teem lub teeb liab simulated rau coincide nrog cov txheej txheem qis (xws li xoom degrees).
2. Siv tus yuam sij Scroll kom txog thaum " ” tshwm rau ntawm PV Display. (Saib rau 8.2)
3. Siv lub Up thiab Down Keys kom txog thaum PV Display sawv cev rau cov tswv yim simulated.
4. Nias tus yuam sij Rov qab yam tsawg kawg 6 vib nas this (ntau tshaj 16 vib nas this), ces tso tawm. Qhov no nkag mus rau qhov qis calibration daim duab rau hauv tus maub los lub cim xeeb tsis-volatile.
5. Nias thiab tso tus yuam sij Scroll. ” ” tshwm nyob rau ntawm PV Display. Qhov no qhia tau hais tias lub siab calibration point.
6. Nce lub simulated input teeb liab kom coincide nrog siab 11process teeb liab (xws li 100 degrees).
7. Siv lub Up thiab Down Keys kom txog rau thaum SV Display sawv cev rau cov tswv yim simulated siab.
8. Nias tus yuam sij Rov qab yam tsawg kawg 6 vib nas this (ntau tshaj 16 vib nas this), ces tso tawm. Qhov no nkag mus rau lub siab calibration daim duab rau hauv tus maub los lub cim xeeb tsis-volatile.
9. Tig lub hwj chim tawm ntawm chav tsev, tshem tawm tag nrho cov kev ntsuas hluav taws xob thiab hloov cov hluav taws xob sensor (saib cov polarity).

Kev ua haujlwm

8.1 KEYPAD Kev Ua Haujlwm
* Nrog lub hwj chim qhib, nws yuav tsum tau tos 12 vib nas this kom nco txog qhov tseem ceeb tshiab ntawm qhov tsis muaj ib zaug nws tau hloov pauv.

KOOB	FUNCTION	Kev piav qhia
	Scroll Key	Ua ntej qhov index zaub mus rau txoj haujlwm xav tau. Index nce mus tas li thiab cyclically los ntawm nias lub khawm no.
	Up Ntsiab	Nce qhov parameter
	Ntsiab Lus	Txo qhov parameter
	Rov Ntsuam Xyuas	Resets tus maub los rau nws li qub. Tsis tas li ntawd nres auto-tuning, tso zis percentage kev saib xyuas thiab kev tuav haujlwm hom.
Xovxwm rau 6 vib nas this	Ntev Scroll	Tso cai rau kev tshuaj xyuas ntau dua lossis hloov pauv.
Xovxwm  rau 6 vib nas this	Rov qab mus ntev	1. Ua haujlwm pib-tuning 2. Calibrates tswj thaum nyob rau hauv calibration theem
Xovxwm thiab	Tso zis Percentage Saib Xyuas	Tso cai rau lub teeb taw tes tso saib los qhia txog tus nqi tso tawm.
Xovxwm thiab  rau 6 vib nas this	Manual hom kev ua	Tso cai rau tus maub los nkag rau hauv phau ntawv hom.

8.2 FLOW CHARTTus yuam sij "rov qab" tuaj yeem nias txhua lub sijhawm.
Qhov no yuav ua rau cov zaub rov qab mus rau Tus Txheej Txheem tus nqi / Teem taw tes tus nqi.
Lub zog siv:

1. Tso tawm rau 4 vib nas this. (Software Version 3.6 lossis siab dua)
2. LED kuaj. Txhua ntu LED yuav tsum tau teeb rau 4 vib nas this.
3. Tus nqi txheej txheem thiab teeb taw tes qhia.

8.3 PARAMETER DESCRIPTION

INDEX CODE	POM ZOO TSHAJ PLAWS	** KEV TIV THAIV
SV	Teem point Value Control * Tsawg Limit rau High Limit Tus Nqi	Tsis tau txhais
	Tswb Teem point Tus Nqi * Tsawg Limit rau High Limit Value. if  = 0, 1, 4 lossis 5) * 0 txog 3600 feeb (yog tias  = 12 lossis 13) * Tsawg txwv minus teem taw tes rau siab txwv rho tawm teeb taw tes tus nqi (yog tias              = 2, 3, 6 - 11)	200 BC
	Ramp Tus nqi rau tus nqi txheej txheem los txwv qhov kev hloov pauv sai sai (Soft Start) * 0 txog 200.0 BC (360.0 BF) / feeb (yog    = 0-9) * 0 txog 3600 units / min (yog tias  =10)	0 BC / min.
	Offset Tus Nqi rau Kev Taw Qhia Reset (yog  = 0) * 0 txog 100%	0.0%
	Offset hloov rau tus nqi txheej txheem * -111 BC rau 111 BC	0 BC
	Kwv Txhiaj Sawv Daws * 0 txog 200 BC ( teem rau 0 rau kev tswj-tawm)	10 BC
	Integral (Reset) Sijhawm * 0 rau 3600 vib nas this	120 sec.
	Derivative (Rate) Sijhawm * 0 rau 360.0 vib nas this	30 sec.
	Hom hauv zos 0: Tsis muaj kev tswj tsis tuaj yeem hloov pauv 1: Kev tswj tsis tau tuaj yeem hloov pauv	1
	Kev xaiv Parameter (tso cai xaiv cov kev txwv ntxiv kom nkag mus tau ntawm qib 0 kev ruaj ntseg)	0
	Lub Sijhawm Cycle Proportional * 0 rau 120 vib nas this	Relay		20
		Pulsed Voltage		1
		Linear Volt / mA		0
	Input Hom Xaiv 0: J hom T / C 6: S hom T / C 1: K hom T / C 7: N hom T / C 2: T hom T / C 8: PT100 DIN 3: E hom T / C 9: PT100 JIS 4: B hom T / C 10: Linear Voltage lossis Tam sim no 5: R hom T / C Lus Cim: T / C-Kaw solder gap G5, RTD-Qhib G5	T/C	0
		RTD	8
		Tawm	10
	Kev xaiv tswb hom 0: Cov txheej txheem siab tswb 8: Lub tswb nrov 1: Txheej Txheem Tsawg Tswb 9: Inband Tswb 2: Deviation siab tswb 10: Inhibit Outband Tswb 3: Deviation Low Alarm 11: Inhibit Inband Alarm 4: Inhibit Process High Tswb 12: Tswb Relay OFF as 5: Inhibit Process Low Alarm Nyob Zoo Sijhawm Tawm 6: Inhibit Deviation High Alarm 13: Tswb Relay ON as 7: Inhibit Deviation Low Alarm Dwell Time Out	0
	Hysteresis ntawm Tswb 1 * 0 txog 20% ​​ntawm SPAN	0.5%
	BC / BF Xaiv 0: bf, 1: ib	1
	Kev xaiv xaiv 0: Tsis muaj tus lej lej 2: 2 Tus lej Decimal 1: 1 Tus lej Decimal 3: 3 Tus lej Decimal (2 & 3 tsuas yog siv rau cov kab tawm voltage lub tam sim no    =10)	0
	Tswj Kev Ua Haujlwm 0: Direct (Cooling) Action 1: Rov qab (Rov Kub) Ua	1
	Kev tiv thaiv yuam kev 0: Tswj OFF, Tswb OFF 2: Tswj ON, Tswb OFF 1: Tswj OFF, Tswb ON 3: Tswj ON, Tswb ON	1
	Hysteresis rau ON / OFF Tswj * 0 txog 20% ​​ntawm SPAN	0.5%
	Tsawg txwv ntawm Range	-50 BC
	Siab Limit ntawm Range	1000 BC
	Low Calibration Daim duab	0 BC
	High Calibration Daim duab	800 BC

CEEB TOOM: * Kho qhov ntau ntawm Parameter
** Hoobkas nqis. Cov txheej txheem ceeb toom yog nyob ntawm qhov ntsuas kub ruaj khov. Deviation alarms txav nrog tus nqi teev cov ntsiab lus.
8.4 AUTOMATIC TUNING

1. Xyuas kom meej tias tus maub los raug teeb tsa thiab nruab.
2. Xyuas kom tseeb tias qhov sib npaug Band 'Pb' tsis raug teeb tsa ntawm '0'.
3. Nias Return Key tsawg kawg yog 6 vib nas this (siab tshaj 16 vib nas this). Qhov no pib ua haujlwm Auto-tune. (Txhawm rau rho tawm nws tus kheej-tuning txheej txheem nias Rov qab Key thiab tso tawm).
4. Lub kaum sab xis ntawm kaum sab xis sab xis ntawm PV cov duab flashes qhia tias nws pib-tune nyob rau hauv kev kawm. Auto-tune tiav thaum lub flashing nres.
5. Nyob ntawm cov txheej txheem tshwj xeeb, kev hloov kho tsis siv neeg yuav siv sijhawm li ob teev. Cov txheej txheem nrog lub sij hawm ntev lags yuav siv sij hawm ntev tshaj plaws los kho. Nco ntsoov, thaum lub ntsiab lus pom flashes tus maub los nws pib-tuning.

CEEB TOOM: Yog tias AT yuam kev ( ) tshwm sim, cov txheej txheem tuning tsis siv neeg raug rho tawm vim lub kaw lus ua haujlwm hauv ON-OFF tswj (PB = 0).
Cov txheej txheem tseem yuav raug rho tawm yog tias qhov teeb tsa tau teeb tsa los ze rau qhov txheej txheem kub lossis yog tias tsis muaj peev xwm txaus hauv qhov system kom ncav cuag qhov taw tes (xws li lub zog cua sov tsis txaus). Tom qab ua tiav ntawm Auto-tune qhov tshiab PID teeb tsa tau nkag mus rau hauv tus maub los lub cim xeeb uas tsis yog-volatile.
8.5 MANUAL PID ADJUSTMENT
Txawm hais tias nws pib-tuning muaj nuj nqi xaiv tswj kev teeb tsa uas yuav tsum ua pov thawj txaus siab rau feem ntau ntawm cov txheej txheem, koj tuaj yeem pom tias nws tsim nyog los hloov kho rau cov kev txiav txim siab ntawm lub sijhawm. Qhov no yuav yog rooj plaub yog tias qee qhov kev hloov pauv tau ua rau tus txheej txheem lossis yog tias koj xav 'zoo-tune' cov kev tswj hwm.
Nws yog ib qho tseem ceeb uas ua ntej hloov pauv rau kev tswj hwm qhov chaw uas koj sau cov chaw tam sim no rau yav tom ntej siv. Ua kom hloov me ntsis rau ib qho kev teeb tsa ntawm ib lub sijhawm thiab saib xyuas cov txiaj ntsig ntawm tus txheej txheem. Vim tias txhua qhov chaw sib cuam tshuam nrog ib leeg, nws yooj yim los ua tsis meej pem nrog cov txiaj ntsig yog tias koj tsis paub txog cov txheej txheem tswj cov txheej txheem.
TUNING GUIDE
Kwv Txhiaj Sawv Daws

Cov tsos mob	Kev daws
Teb qeeb	Txo tus nqi PB
High Overshoot los yog Oscillations	Nce PB tus nqi

Integral Time (Reset)

Cov tsos mob	Kev daws
Teb qeeb	Txo Lub Sijhawm Ib Nrab
Instability los yog Oscillations	Nce Lub Sijhawm Ib Leeg

Lub Sijhawm Derivative (Rate)

Cov tsos mob	Kev daws
Slow Response los yog Oscillations	Txo Deriv. Sijhawm
Siab Overshoot	Nce Deriv. Sijhawm

8.6 MANUAL TUNING PROCEDURE
Kauj ruam 1: Kho qhov tseem ceeb thiab derivative qhov tseem ceeb rau 0. Qhov no inhibits tus nqi thiab rov pib ua haujlwm
Kauj Ruam 2: Teem ib qho txiaj ntsig ntawm kev faib ua feem band thiab saib xyuas cov txiaj ntsig tswj
Kauj Ruam 3: Yog tias qhov teeb tsa thawj zaug qhia txog cov txheej txheem loj oscillation, ces maj mam nce cov proportional band kom txog thaum lub caij tsheb kauj vab tsis tu ncua. Sau no proportional band value (Pc).
Kauj Ruam 4: Ntsuas lub sijhawm ntawm kev caij tsheb kauj vab tsis tu ncuaSau tus nqi no (Tc) hauv vib nas this
Kauj Ruam 5: Cov Chaw Tswj Xyuas tau txiav txim siab raws li hauv qab no:
Qhov Loj Band (PB) = 1.7 Pc
Integral Time (TI) = 0.5 Tc
Derivative Time(TD) = 0.125 Tc
8.7 r ibAMP & DWELL
BTC-9090 maub los tuaj yeem teeb tsa los ua raws li tus tswj hwm teeb tsa ruaj khov lossis ua ib qho ramp controller rau lub zog. Qhov kev ua haujlwm no ua rau tus neeg siv los teeb tsa ua ntej txiav txim siab ramp tus nqi tso cai rau cov txheej txheem maj mam ncav cuag qhov kub thiab txias, yog li tsim 'Soft Start' muaj nuj nqi.
Lub sijhawm nyob hauv tsev tau koom nrog hauv BTC-9090 thiab lub tswb relay tuaj yeem teeb tsa los muab kev ua haujlwm nyob hauv tsev los siv ua ke nrog ramp muaj nuj nqi.
Cov ramp tus nqi yog txiav txim los ntawm ' ' parameter uas tuaj yeem hloov kho hauv thaj tsam 0 txog 200.0 BC / feeb. Cov ramp tus nqi muaj nuj nqi yog neeg xiam thaum lub ' ' parameter yog teem rau '0'.
Kev ua haujlwm ntub dej yog qhib los ntawm kev teeb tsa lub tswb tso tawm kom ua raws li lub sijhawm nyob. Qhov parameter yuav tsum tau teem caij rau tus nqi 12. Lub tswb hu tam sim no yuav ua haujlwm raws li lub sijhawm sib cuag, nrog rau kev tiv tauj raug kaw ntawm lub zog thiab qhib tom qab lub sijhawm dhau los ntawm qhov ntsuas. .
Yog hais tias tus maub los lub hwj chim mov los yog tso zis yog wired los ntawm lub tswb hu, tus maub los yuav ua hauj lwm raws li ib tug guaranteed soak controller.

Hauv example sub Ramp Tus nqi yog teem rau 5 BC / feeb, =12 thiab = 15 (feeb). Lub zog siv rau lub sijhawm xoom thiab cov txheej txheem nce ntawm 5 BC / feeb mus rau qhov teeb tsa ntawm 125 BC. Thaum ncav cuag qhov taw tes, lub sijhawm nyob twj ywm qhib thiab tom qab lub sijhawm so ntawm 15 feeb, lub tswb hu xov tooj yuav qhib, hloov tawm cov zis. Cov txheej txheem kub yuav thaum kawg poob ntawm tus nqi tsis tau txiav txim siab.Lub dwell function yuav raug siv los khiav cov khoom siv sab nraud xws li lub siren kom ceeb toom thaum lub sij hawm ntub dej tau mus txog.
yuav tsum tau teem rau tus nqi 13. Lub tswb hu tam sim no yuav ua hauj lwm raws li ib tug timer hu, nrog rau kev sib cuag tau qhib nyob rau hauv lub pib pib. Lub timer pib suav down thaum lub teeb taw tes kub ncav cuag. Tom qab qhov kev teeb tsa ntawm tau dhau mus, lub tswb hu xov tooj kaw.
XOV XWM yuam kev

Cov tsos mob	Ua rau (s)	Kev daws (s)
	Sensor tawg yuam kev	Hloov RTD lossis sensor Siv hom kev ua haujlwm ntawm tes
	Cov txheej txheem tso tawm tshaj qhov qis qis taw tes	Rov kho tus nqi
	Cov txheej txheem tso tawm dhau qhov siab ntau qhov taw tes	Rov kho tus nqi
	Analog hybrid module puas	Hloov module. Tshawb xyuas qhov chaw sab nraud ntawm kev puas tsuaj xws li kev hloov pauv voltage ua spik
	Kev ua haujlwm tsis raug ntawm kev pib kho tus txheej txheem Prop Band teem rau 0	Rov ua txheej txheem. Nce Prop. Band rau tus lej loj dua 0
	Manual hom tsis tso cai rau ON-OFF tswj qhov system	Nce proportional band
	Txheeb xyuas qhov yuam kev, qhov tseem ceeb hauv lub cim xeeb yuav raug hloov pauv	Tshawb xyuas thiab rov kho cov kev tswj tsis tau

Cov Lus Qhia Ntxiv rau Tus Tshiab Version
Chav tsev nrog firmware version V3.7 muaj ob qhov tsis ntxiv - "PVL" thiab "PVH" nyob rau hauv qib 4 raws li qhov ntsuas tsis txaus ntawm sab laug tes.
Thaum koj xav tau hloov tus nqi LLit rau tus nqi siab dua lossis hloov tus nqi HLit rau tus nqi qis dua, cov txheej txheem hauv qab no yuav tsum tau ua raws li kom tus nqi PVL sib npaug rau ib feem kaum ntawm LCAL tus nqi thiab PVH alue sib npaug rau ib feem kaum ntawm HCAL tus nqi. Txwv tsis pub cov txheej txheem ntsuas qhov tseem ceeb yuav tawm ntawm qhov tshwj xeeb.

1. Siv tus yuam sij Scroll kom txog thaum "LLit" tshwm rau ntawm PV Display. Siv Up thiab Down Keys los teeb tsa tus nqi LLit rau tus nqi siab dua li tus nqi qub.
2. Nias thiab tso tus yuam sij Scroll, ces "HLit" tshwm rau ntawm PV Display. Siv Up thiab Down Keys los teeb tsa tus nqi HLit rau tus nqi qis dua tus nqi qub.
3. Tig lub hwj chim OFF thiab ON.
4. Siv tus yuam sij Scroll kom txog thaum "LCAL" tshwm rau ntawm PV Display. Sau ib daim ntawv ntawm tus nqi LCAL.
5. Nias thiab tso tus yuam sij Scroll, ces "HCAL" tshwm rau ntawm PV Display. Sau ib daim ntawv ntawm tus nqi HCAL.
6. Nias lub Scroll Key tsawg kawg yog 6 vib nas this thiab tom qab ntawd tso tawm, "PVL" tshwm rau ntawm PV Display. Siv UP thiab Down Keys los teeb tsa tus nqi PVL rau ib feem kaum ntawm LCAL tus nqi.
7. Nias thiab tso tus yuam sij Scroll, "PVH" tshwm rau ntawm PV Display. Siv UP thiab Down Keys los teeb tsa tus nqi PVH rau ib feem kaum ntawm HCAL tus nqi.

-Thov nruab 20A Circuit Court breaker ntawm lub hwj huam mov kawg
- Txhawm rau tshem tawm cov plua plav, thov siv daim ntaub qhuav
-Qhov kev teeb tsa uas kev nyab xeeb ntawm ib qho kev sib txuas nrog cov cuab yeej siv yog lub luag haujlwm ntawm kev sib dhos ntawm qhov system
-Yog tias cov cuab yeej siv tsis tau teev los ntawm cov chaw tsim khoom, kev tiv thaiv los ntawm cov khoom siv yuav raug puas tsuaj
Tsis txhob npog lub qhov cua txias kom tswj tau qhov cua
Ceev faj kom tsis txhob nruj ntawm lub davhlau ya nyob twg screws. Lub torque yuav tsum tsis txhob ntau tshaj. 1 14 Nm (10 Lb-in los yog 11.52 KgF-cm), kub Min.60 ° C, siv tooj liab conductors nkaus xwb.
Tsuas yog cov kab hluav taws xob thermocouple, txhua txoj hlua yuav tsum siv cov khoom siv tooj liab uas muaj qhov siab tshaj plaws 18 AWG.
WARRANTY
Brainchild Electronic Co., Ltd. zoo siab los muab cov lus qhia txog kev siv nws ntau yam khoom.
Txawm li cas los xij, Brainchild tsis muaj kev lav phib xaub lossis kev sawv cev ntawm ib yam dab tsi hais txog lub zog rau kev siv, lossis kev thov ntawm nws cov khoom los ntawm Cov Neeg Yuav Khoom. Kev xaiv, thov lossis siv cov khoom siv Brainchild yog tus neeg yuav khoom lub luag haujlwm. Tsis muaj kev thov yuav raug tso cai rau kev puas tsuaj lossis kev puas tsuaj, tsis hais ncaj qha, tsis ncaj, xwm txheej, tshwj xeeb lossis qhov tshwm sim. Cov lus qhia tshwj xeeb tuaj yeem hloov pauv yam tsis tau ceeb toom. Tsis tas li ntawd, Brainchild muaj txoj cai los hloov pauv-tsis muaj kev ceeb toom rau Purchaser-rau cov ntaub ntawv lossis kev ua haujlwm uas tsis cuam tshuam rau kev ua raws li cov lus qhia tshwj xeeb. Cov khoom siv hlwb raug lees paub kom tsis pub muaj qhov tsis zoo ntawm cov khoom siv thiab kev ua haujlwm rau 18 lub hlis tom qab xa mus rau thawj tus neeg yuav khoom siv. Lub sijhawm txuas ntxiv yog muaj nrog tus nqi ntxiv thaum thov. Brainchild lub luag haujlwm nkaus xwb nyob rau hauv qhov kev lees paub no, ntawm Brainchild qhov kev xaiv, tsuas yog txwv rau kev hloov lossis kho, pub dawb, lossis thim rov qab ntawm tus nqi yuav khoom hauv lub sijhawm lav. Qhov kev lees paub no tsis siv rau kev puas tsuaj los ntawm kev thauj mus los, kev hloov pauv, kev siv tsis raug lossis kev tsim txom.
Rov qab
Tsis muaj cov khoom xa rov qab tuaj yeem lees txais yam tsis muaj daim ntawv tso cai xa rov qab (RMA) ua tiav.
CEEB TOOM:
Cov ntaub ntawv hauv tus neeg siv phau ntawv no yuav hloov pauv yam tsis tau ceeb toom.
Copyright a 2023, The Brainchild Electronic Co., Ltd., txhua txoj cai. Tsis muaj ib feem ntawm qhov kev tshaj tawm no yuav raug muab luam tawm, xa tawm, luam tawm lossis khaws cia rau hauv cov txheej txheem retrieval, lossis muab txhais ua ib hom lus hauv ib hom lus los ntawm ib qho twg yam tsis muaj ntawv tso cai los ntawm Brainchild Electronic Co., Ltd.

Yog xav tau kev kho lossis tu, thov hu rau peb.
Electronic Co., Ltd.
No. 209, Chung Yang Rd., Nan Kang Dist.,
Taipei 11573, Taiwan
Xovtooj: 886-2-27861299
Tus Fax: 886-2-27861395
web qhov chaw: http://www.brainchildtw.com

Cov ntaub ntawv / Cov ntaub ntawv

BrainChild BTC-9090 Fuzzy Logic Micro Processor Based Controller [ua pdf] Phau ntawv qhia BTC-9090, BTC-9090 G UL, BTC-9090 Fuzzy Logic Micro Processor Raws li tus maub los, Fuzzy Logic Micro Processor Raws li tus maub los, Micro Processor Raws li tus maub los, processor Raws li tus maub los, raws li tus maub los

Cov ntaub ntawv

• Cov neeg siv phau ntawv