I-MIDAS M32R LIVE I-Digital Console ye-Live kunye ne-Studio kunye ne-40 yeendlela zokuNgena

Umyalelo woKhuseleko obalulekileyo

Izikhululo eziphawulwe ngolu simboli zithwala umsinga wombane owaneleyo Sebenzisa kuphela iintambo zesipika ezikumgangatho ophezulu ezine-¼” TS okanye iiplagi zokutshixa ezifakwe ngaphambili. Lonke olunye ufakelo okanye uhlengahlengiso kufuneka lwenziwe kuphela ngabasebenzi abaqeqeshiweyo. Olu phawu, naphi na apho luvela khona, lukwazisa ngobukho bendawo ebiyelweyo – voltage oko kunokwanela ukwenza ingozi yokothuka. Olu simboli, naphi na apho luvela khona, lukwazisa ngemiyalelo ebalulekileyo yokusebenza kunye nokugcinwa kwi Akukho malungu asebenzisekayo ngaphakathi. Ukuthumela inkonzo kubasebenzi abaqeqeshiweyo.

Isilumkiso
Ukunciphisa ingozi yomlilo okanye ukutshatyalaliswa kombane, musa ukubeka esi sixhobo kwimvula kunye nokufuma. Isixhobo asiyi kuboniswa kulwelo oluvuzayo okanye olutshizayo kwaye akukho zinto zizaliswe lulwelo, njengevazi, ziya kubekwa kwisixhobo.

Isilumkiso
Le miyalelo yenkonzo isetyenziselwa abasebenzi benkonzo abaqeqeshiweyo kuphela. Ukunciphisa umngcipheko wokothuka kombane musa ukwenza nayiphi na inkonzo ngaphandle kwaleyo ikwimiyalelo yokusebenza. Ulungiso kufuneka lwenziwe ngabasebenzi benkonzo abaqeqeshiweyo.

1.  Funda le miyalelo.
2.  Gcina le miyalelo.
3.  Mamela zonke izilumkiso.
4. Musa ukuyoyisa injongo yokhuseleko lweplagi epholileyo okanye esezantsi. Iplagi yepolarized inamaphiko amabini enye ebanzi kunenye. Iplagi yodidi olusezantsi inamacangca amabini kunye neprong yesithathu yokumisa.
5. Iblade ebanzi okanye iprong yesithathu ibonelelwe ukhuseleko lwakho. Ukuba iplagi enikiweyo ayingeni kwindawo yakho yokuphuma, dibana nomntu osebenza ngombane ukuze kufakwe indawo yeplagi ephelelwe lixesha. Iplagi yepolarized inamaphiko amabini enye ebanzi kunenye.
6. Iplagi yodidi olusezantsi inamacangca amabini kunye neprong yesithathu yokumisa. Iblade ebanzi okanye iprong yesithathu ibonelelwe ukhuseleko lwakho. Ukuba iplagi oyinikiweyo ayingeni kwindawo yakho yokuphuma, dibana nomntu osebenza ngombane ukuze utshintshe indawo ephelelwe lixesha. Sebenzisa kuphela izincamatheliso/izixhobo ezichazwe ngumvelisi.
7. Sebenzisa kuphela inqwelo, isigxina, i-tripod, isibiyeli, okanye itafile echazwe ngumvelisi, okanye ithengiswe ngesixhobo.
8. Xa inqwelo isetyenziswa, sebenzisa isilumkiso xa uhambisa indibaniselwano yenqwelo/yezixhobo ukuphepha ukwenzakala kwi-tip-over. Khupha esi sixhobo ngexesha lesiphango sombane okanye xa singasetyenziswa ixesha elide.
9.  Isixhobo siya kudityaniswa nesokhethi ye-MAINS kunye noqhagamshelo lomhlaba olukhuselayo.
10.  Apho i-MAINS plug okanye i-coupler yesixhobo isetyenziswa njengesixhobo sokuqhawula, isixhobo sokuqhawula siya kuhlala sisebenza ngokulula.
11.  Ukulahlwa okuchanekileyo koku
    imveliso: Olu phawu lubonisa ukuba le mveliso akufuneki ilahlwe nenkunkuma yasekhaya, ngokwe-WEEE Directive (2012/19/EU) kunye nomthetho welizwe lakho. Le mveliso kufuneka isiwe kwiziko lokuqokelela elinikwe ilayisenisi yokurisayikilishwa kwenkunkuma yombane kunye nezixhobo zombane (EEE). Ukuphathwa kakubi kolu hlobo lwenkunkuma kunokuba neempembelelo ezingalunganga ezinokubakho kwindalo esingqongileyo nakwimpilo yabantu ngenxa yezinto ezinokuba yingozi.
12. Nceda ugcine imiba yokusingqongileyo yokulahlwa kwebhetri engqondweni. Iibhetri kufuneka zilahlwe kwindawo yokuqokelela ibhetri.
13. Sebenzisa esi sixhobo kwiindawo ezishushu kunye/okanye kwimozulu ephakathi.

INKCAZELO YOMTHETHO

I-MUSICTribe ayamkeli tyala ngayo nayiphi na ilahleko enokufunyanwa nguye nawuphi na umntu othembele ngokupheleleyo okanye ngokuyinxenye kuyo nayiphi na inkcazo, ifoto, okanye ingxelo equlethwe apha. Iinkcukacha zobugcisa, inkangeleko kunye nolunye ulwazi lunokutshintshwa ngaphandle kwesaziso.Zonke iimpawu zokuthengisa ziyipropati yabanini bazo. MIDAS, KLARKTEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA kunye ne-COOLAUDIO ziimpawu zorhwebo okanye ziimpawu zorhwebo ezibhalisiweyo ze-MUSIC Group IP Ltd.
UMCULO Group IP Ltd. 2018 Onke amalungelo agciniwe.

ISIQINISEKISO ESIPHELELEYO

Ngemigaqo nemiqathango yewaranti esebenzayo
kunye nolwazi olongezelelweyo malunga neWaranti ye-MUSIC Tribe's Limited, nceda ubone iinkcukacha ezipheleleyo kwi-intanethi umculo-group.com/warranty.

Ulwazi olubalulekileyo

1.  Bhalisa kwi-intanethi. Nceda ubhalise izixhobo zakho ze-MUSIC Tribe entsha emva kokuba uyithenge ngokundwendwela midasconsoles.com. Ukubhalisa ukuthenga kwakho usebenzisa ifom yethu elula kwi-line kusinceda ukuba siqhube amabango akho okulungisa ngokukhawuleza nangempumelelo. Kwakhona, funda imigaqo kunye neemeko zewaranti yethu, ukuba ikhona.
2.  Iinkqubo zininzi. Ngaba umthengisi wakho oGunyazisiweyo woMCULO weSizwe akabikho kwindawo yakho,
   ungaqhagamshelana ne-MUSIC Tribe Authorized Fulfiller yelizwe lakho edweliswe phantsi kwe "Support" kwi-midasconsoles.com. Ngaba ilizwe lakho alinakufakwa kuluhlu, nceda ujonge ukuba ingxaki yakho inokusingathwa na yi "Inkxaso ye-Intanethi" yethu enokufumaneka phantsi kwe "Inkxaso" kwi-midasconsoles.com. Kungenjalo, nceda ungenise ibango lewaranti ye-intanethi kwi-midasconsoles.com PHAMBI kokubuyisela imveliso.
3.  Uqhagamshelo lwamandla. Ngaphambi kokuba uplage iyunithi kwisokethi yamandla, nceda uqiniseke ukuba uyayisebenzisa

Umphezulu woLawulo

1. KWIFIG/PREAMP – Lungisa kwangaphambiliamp inzuzo yetshaneli ekhethiweyo ngolawulo lwe-GAIN olujikelezayo. Cinezela iqhosha le-48 V ukufaka amandla e-phantom ukuze asetyenziswe kunye nee-microphone ze-condenser kwaye ucinezele iqhosha elingu-0 ukubuyisela umva isigaba setshaneli. Imitha ye-LED ibonisa inqanaba letshaneli ekhethiweyo. Cinezela iqhosha LOW CUT kwaye ukhethe i-frequency efunwayo yokupasa ephezulu ukususa amazantsi angafunekiyo. Cofa i VIEW iqhosha ukufikelela kwiiparamitha ezineenkcukacha ezininzi kuMboniso ongundoqo.
2. Isango / I-DYNAMICS - Cofa iqhosha le-GATE
3. EQUALIZER - Cofa iqhosha le-EQ ukubandakanya eli candelo. Khetha enye yeebhendi ezine frequency ezine LOW, LO MID,
4. HI MID kunye namaqhosha aphezulu. Cofa iqhosha leMODE ukujikeleza kwiindidi ze-EQ ezikhoyo. Yandisa okanye unqumle i-frequency ekhethiweyo nge-GAIN yolawulo olujikelezayo. Khetha i-frequency ethile yokulungiswa kunye ne-FREQUENCY yokulawula i-rotary kwaye ulungelelanise i-bandwidth ye-frequency ekhethiweyo kunye nolawulo lwe-rotary WIDTH. Cofa i VIEW iqhosha ukufikelela kwiiparamitha ezineenkcukacha ezininzi
5. I-CTI MONITOR - Lungisa umgangatho weziphumo zokubeka iliso kunye nolawulo lwe-rotary MONITOR LEVEL. Lungisa inqanaba lee-headphones eziphumayo kunye ne-PHONES LEVEL yolawulo olujikelezayo. Cinezela iqhosha le-MONO ukujonga umsindo kwi-mono. Cinezela iqhosha le-DIM ukunciphisa umthamo wokubeka iliso. Cofa i VIEW iqhosha lokunyenyisa ubungakanani bokuthomalalisa kunye nayo yonke eminye imisebenzi enxulumene nokujonga.
6. Cil RECORDER - Qhagamshela intonga yememori yangaphandle ukufaka uhlaziyo lwe-firmware, ukulayisha kunye
7. IBHASI EPHAMBILI-Cofa i-MONO CENTER okanye amaqhosha e-MAIN STEREO ukwabela isitishi kwi-mono ephambili okanye ibhasi ye-stereo. Xa i- MAIN STEREO (ibhasi yestereo) ikhethiwe, iPAN/BAL ilungelelanisa kwindawo esekhohlo ukuya ekunene. Lungisa inqanaba lokuthumela ngokubanzi kwi-mono bus kunye ne-M/C LEVEL yolawulo olujikelezayo. Cofa i VIEW iqhosha ukufikelela kwiiparamitha ezineenkcukacha ezininzi kuMboniso ongundoqo.
8. UKUBONISA OKUPHAMBILI – Uninzi lolawulo lwe-M32R lunokuhlelwa kwaye lubekwe iliso kuMboniso oPhambili. Xa i VIEW iqhosha licinezelwe kuyo nayiphi na imisebenzi yendawo yolawulo, ilapha ukuba ingabakho viewed. Umboniso oyintloko usetyenziselwa ukufikelela kwi-60 + imiphumo ebonakalayo. Jonga icandelo 3. Umboniso ongundoqo.
9. I-ASSIGN - Yabela ulawulo lwe-rotary ezine kwiiparamitha ezahlukeneyo zokufikelela kwangoko
   kwimisebenzi esetyenziswa ngokuqhelekileyo. Iziboniso zeLCD zibonelela ngereferensi ekhawulezayo kwizabelo zomaleko osebenzayo wolawulo lwesiko. Yabela iqhosha ngalinye kwasibhozo ngokwesiko ASSIGN (amanani 5- kwiiparameters ezahlukeneyo zofikelelo olukhawulezileyo kwimisebenzi eqhelekileyo. Cofa elinye lamaqhosha eSET ukuvula elinye lamanqwanqwa amathathu olawulo olwabiweyo. Nceda jonga kwiNcwadi yoMsebenzisi ukuze ufumane iinkcukacha ezithe vetshe malunga noku. isihloko.
10. KHETHA ULAWULO-Ukucofa elinye lala maqhosha alandelayo ukhetha umaleko ohambelanayo kwisitishi esifanelekileyo:
    •  IMIBANDELA 1-8, 9-16, 17-24 & 25-36- ibhloko yokuqala, eyesibini, eyesithathu neyesine yamajelo asibhozo anikezelwe kwi-ROUTING/ IKHAYA kwiphepha.
    •  I-FX RET - ikuvumela ukuba ulungelelanise amanqanaba eempembelelo ezibuyiswayo.
    •  I-AUX IN / USB-ibhloko yesihlanu yamajelo amathandathu kunye neRekhoda ye-USB, kunye nejelo le-FX elisibhozo liyabuya (1L ... 4R)
    •  BUS 1-8 & 9-16- oku kukuvumela ukuba ulungelelanise amanqanaba e-16 Mix Bus Masters, eluncedo xa uquka iBus Masters kwizabelo zeQela le-DCA, okanye xa udibanisa iibhasi ukuya kwimatriki 1-6.
    •  I-REM – iqhosha le-DAW elikude – Cofa oku

Iphaneli yangasemva

1. UKUBEKA/ UKULAWULA IZIPHUMO ZEGUMBI
   qhagamshela iperi yestudio iimonitha usebenzisa
2. XLR okanye¼”
   iintambo. Kwakhona kubandakanya i-12 V / 5 W lamp uqhagamshelwano.
3. AUX IN / OUT 
   Qhagamshela kwaye usuka kwisixhobo sangaphandle usebenzisa i¼” okanye iintambo zeRCA.
4. AMAgalelo 1 -16
   Qhagamshela imithombo yomsindo (efana ne-microphone okanye imithombo yenqanaba lomgca) ngeentambo ze-XLR.
5. AMANDLA
   Isiseko se-IEC esingundoqo kunye
6. LAYITA ICIMA
   tshintsha.
7. IZIPHUMO 1 – 8
   Thumela isandi se-analogue kwisixhobo sangaphandle usebenzisa iintambo ze-XLR. Iziphumo ze-15 kunye ne-16 ngokungagqibekanga zithwala izibonakaliso eziphambili ze-stereo zebhasi.
8. IKHADI LE-DN32-LIVE INTERFACE
   Dlulisa ukuya kuthi ga kwiitshaneli zeaudio ezingama-32 ukuya nokusuka kwikhompyuter nge-USB 2.0, kunye nokurekhoda ukuya kuthi ga kwiitshaneli ezingama-32 kumakhadi e-SD/SDHC. IINGXELO ZOKULAWULWA KWE-REMOTE- Qhagamshela kwiPC yolawulo olukude ngentambo ye-Ethernet.
9. ULTRANET 
   Qhagamshela kwinkqubo yokubeka iliso yomntu, njenge-BEHRINGER P16, ngentambo ye-Ethernet.
10. I-AESSO A/B 
    Dlulisa ukuya kuthi ga kwiitshaneli ezingama-96 ngaphakathi nangaphandle ngeentambo ze-Ethernet. Nceda ujonge kwiNcwadi yoMsebenzisi ngolwazi oluthe vetshe malunga nesihloko ngasinye.

1. BONISA ISENZO 
   Ulawulo kweli candelo lusetyenziswa ngokudibeneyo neskrini sombala ukuze ukhangele kwaye ulawule imizobo equlathwe kuyo. Ngokuquka ulawulo lwerotary oluzinikeleyo oluhambelana nolawulo olujongeneyo kwisikrini, kunye nokubandakanya amaqhosha ekhesa, umsebenzisi angajonga kwaye alawule zonke izinto zesikrini sombala. ikhonsoli, kwaye ikwavumela umsebenzisi ukuba enze uhlengahlengiso olwahlukeneyo olungabonelelwanga lulawulo lwehardware oluzinikeleyo.
2. I-CD EPHAMBILI/IIMmitha ze-SOLO
   Le mitha iphindwe kathathu yecandelo le-24 ibonisa inqanaba lophawu lomsindo oluphuma kwibhasi enkulu, kunye neziko eliphambili okanye ibhasi eyedwa yeconsole.
3. AMAQHOSHA OKUKHETHWA KWESIKHIWO
   La maqhosha asibhozo akhanyisiweyo avumela umsebenzisi ukuba ahambe ngokukhawuleza ukuya nakwesiphi na izikrini ezisibhozo ezijongana namacandelo ahlukeneyo ekhonsoli.
4. Amacandelo anokuba PHEZULU/PHANSI/EKHOXE/EKUDENI ULAWULO LOKULAWULA-EKHOhlo kwaye EKUDENI
   ulawulo luvumela ukhangelo-ekunene-ekunene phakathi kwamaphepha awohlukeneyo aqulethwe ngaphakathi kweseti yekhusi. Umboniso wethebhu yomzobo ubonisa ukuba leliphi iphepha okulo ngoku. Kwezinye izikrini kukho iiparamitha ezininzi ezinokuthi zilungelelaniswe lulawulo olujikelezayo ezintandathu ngaphantsi. Kwezi meko, sebenzisa i-UP kunye ne-PHANTSI amaqhosha ukuzulazula kuyo nayiphi na imigangatho eyongezelelweyo equlethwe kwiphepha lesikrini. Amaqhosha e-LEFT kunye ne-RIGHT ngamanye amaxesha asetyenziswa ukuqinisekisa okanye ukurhoxisa i-pop-ups yokuqinisekisa. Nceda ujonge kwiNcwadi yoMsebenzisi ngolwazi oluthe vetshe malunga nesihloko ngasinye.
   •  ITHALA LEENCWADI – ITHALA LEENCWADI
     isikrini sivumela ukulayishwa kunye nokugcinwa koseto oluqhele ukusetyenziswa kwigalelo letshaneli, abaqhubekisi beziphumo, kunye neemeko zomzila. Isikrini se-LIBRARY siqulethe ezi tabs zilandelayo: itshaneli: Le thebhu ivumela umsebenzisi ukuba alayishe kwaye agcine imidibaniso esetyenziswa ngokuqhelekileyo yokusetyenzwa kwetshaneli, kuquka i-dynamics kunye nokulinganisa. iziphumo: Le thebhu ivumela umsebenzisi ukuba alayishe kwaye agcine iziphumo eziqhele ukusetyenziswa kwi-presets yeprosesa. Umzila: Le thebhu ivumela umsebenzisi ukuba alayishe kwaye agcine iindlela zomqondiso ezisetyenziswa ngokuqhelekileyo.
   •  IMIPHUMELA – IMIPHUMELA
     isikrini silawula imiba eyahlukeneyo yeziphumo ezisibhozo zeprosesa. Kule sikrini umsebenzisi unokukhetha iintlobo ezithile zeempembelelo kwiiprosesa zeziphumo ezisibhozo zangaphakathi, uqwalasele iindlela zabo zegalelo kunye nemveliso, ukubeka iliso kumanqanaba abo, kunye nokulungelelanisa iiparamitha zeziphumo ezahlukeneyo. I EFFECTS ikhusi iqulathe ezi thebhu zilandelayo ezahlukeneyo: ikhaya: Ikhusi lasekhaya libonelela ngokubanzi ngaphezuluview ye-virtual effects rack, ebonisa ukuba yintoni umphumo oye wafakwa kwindawo nganye kwiindawo zokubeka ezisibhozo, kunye nokubonisa igalelo / iindlela zemveliso kwi-slot nganye kunye ne-1/0 amanqanaba omqondiso.
   •  Ezi zikrini ezisibhozo eziphindwe kabini zibonisa yonke idatha efanelekileyo kwiiprosesa ezisibhozo ezihlukeneyo, ezivumela umsebenzisi ukuba alungelelanise zonke iiparameters zesiphumo esikhethiweyo.
   • CINGA- UCWANGCISO
     isikrini sinikezela ngolawulo lwehlabathi, imisebenzi ekumgangatho ophezulu weconsole, efana nohlengahlengiso lokubonisa, sample rates & ungqamaniso, useto lomsebenzisi, kunye noqwalaselo lwenethiwekhi. I-SETUP yesikrini iqulathe ezi thebhu zilandelayo zahlukeneyo:iglobal: Esi sikrini sibonelela ngohlengahlengiso
   • inethiwekhi: Esi sikrini sinikezela ngolawulo olwahlukileyo lokuncamathela ikhonsoli kuthungelwano oluqhelekileyo lwe-Ethernet. (Idilesi ye-IP, i-Subnet Mask, i-Gateway.) Isikripthi somgca: Esi sikrini sibonelela ngolawulo lweendlela ezahlukeneyo zokwenza imicu yokubhala ye-LCD yeconsole. phambiamps: Ibonisa inzuzo ye-analogue yamagalelo emic yasekuhlaleni (XLR ngasemva) kunye namandla ephantom, ukuquka ukuseta ukusuka kude stagiibhokisi (umz. DL16) eziqhagamshelwe nge-AESSO. ikhadi: Esi sikrini sikhetha igalelo/ uqwalaselo lwemveliso yekhadi elifakiweyo lojongano.
   •  I-MONITOR 
     Ibonisa usebenzo lwecandelo le-monitor kuMboniso oPhambili.
   •  IZENZO 
     Eli candelo lisetyenziselwa ukugcina kunye nokukhumbula imiboniso ezenzekelayo kwi-console, ivumela uqwalaselo olwahlukileyo ukuba lukhunjulwe kwixesha elizayo. Nceda ujonge kwiNcwadi yoMsebenzisi ngeenkcukacha ezithe vetshe ngesi sihloko.
   •  THUMULA GRP- I-GRP YESIMUMU
     isikrini sivumela isabelo esikhawulezayo kunye nolawulo lwamaqela amathandathu e-console, kwaye inika imisebenzi emibini eyahlukeneyo: Uthulisa isikrini esisebenzayo ngexesha lenkqubo yokwabela amajelo kumaqela angathethiyo. Oku kuqinisekisa ukuba akukho ziteshi zithuliswa ngengozi ngexesha lenkqubo yokunikezelwa ngexesha lomsebenzi ophilayo. Inika ujongano olongezelelweyo lokuthulisa/ukungamulisi amaqela ukongeza kumaqhosha eqela azinikeleyo angathethiyo asezantsi kweconsole.
   •  UKUSETYENZISWA – INKCAZELO
     Isikrini sisikrini esongezelelweyo esenzelwe ukusebenza ngokudibeneyo nezinye izikrini ezinokuthi zibe ngaphakathi view nangawuphi na umzuzu. Isikrini se-UTILITY asizange sibonwe ngokwaso, sihlala sikhona kwi

Ukuhlela iiLCDs zeSitishi seSiteshi

1.  Cofa iqhosha lokukhetha letshaneli onqwenela ukuyitshintsha kwaye ucinezele UKUSEBENZA.
2. Sebenzisa ulawulo olujikelezayo ngezantsi kwesikrini ukulungisa iiparamitha.
3. Kukwakho ithebhu yeScribble Strip ezinikeleyo kwiSETUP menu.
4.  Khetha itshaneli ngelixa viewukwenza esi sikrini ukuhlela.

Ukusebenzisa iibhasi
Ukuseta ibhasi:
I-M32R ibonelela ngebhasi ye-ultra flexible njengoko ibhasi yetshaneli nganye ithumelayo inokuzimela ngokuzimeleyo kwangaphambili okanye nge-Post-Fader, (ikhethwa ngokwezibini zeebhasi). Khetha itshaneli uze ucinezele VIEW kwi IBUS ITHUMELA icandelo kumtya wetshaneli.Veza iinketho zePre/Post/Subgroup ngokucinezela iqhosha lokuNavigation ezantsi ngescreen. Ukumisela ibhasi kwihlabathi jikelele, cofa iqhosha layo le-SEL uze ucinezele VIEW kwiCON FIG/PREAMP icandelo kumcu wetshaneli. Sebenzisa ulawulo lwerotary lwesithathu ukutshintsha ubumbeko. Oku kuya kuchaphazela onke amatshaneli athunyelwa kule bhasi.Qaphela: Iibhasi ezixubeneyo zinokudityaniswa kwimiba engaqhelekanga-eyayamene ngababini ukuze zenze iibhasi zomxube we-stereo. Ukudibanisa iibhasi, khetha enye kwaye ucinezele i VIEW iqhosha kufutshane neCON FIG/PREAMP icandelo lomcu wetshaneli. Cinezela ulawulo lokuqala olujikelezayo ukudibanisa. Xa uthumela kwezi bhasi, i-Odd BUS SEND control rotary iya kulungelelanisa inqanaba lokuthumela kwaye nkqu I-BUS SEND ulawulo olujikelezayo luya kulungelelanisa i-pan / ibhalansi.

Imixube yeMatrix
Imixube yeMatrix inokondliwa kuyo nayiphi na ibhasi yomxube kunye ne-MAIN LR kunye neZiko/ibhasi yeMono. Ukuthumela kwiMatrix, cofa kuqala iqhosha le-SEL ngaphezulu kwebhasi ofuna ukuyithumela. Sebenzisa izilawuli ezine ezijikelezayo kwicandelo le-BUUS THUMELA letshaneli

Uhlaziyo lweFirmware kunye ne-USB Stick Recording

1.  Khuphela i-firmware entsha ye-console kwiphepha lemveliso ye-M32R ukuya kwinqanaba leengcambu zememori ye-USB.
2. Cofa kwaye ubambe icandelo RECORDER's VIEW iqhosha ngelixa utshintshela ikhonsoli ukungenisa indlela yohlaziyo.
3. Qhagamshela intonga yememori ye-USB kwindawo ephezulu yokudibanisa i-USB.
4.  I-M32R iya kulinda i-USB drive ukuba ilungile kwaye emva koko iqhube uhlaziyo lwe-firmware oluzenzekelayo.
5.  Xa idrayivu ye-USB isilela ukulungela, uhlaziyo alunakwenzeka kwaye sicebisa ukuba ucime/ uvule i-console ukuze uqalise i-firmware yangaphambili.
6. imizuzu ubude kunolandelelwano lwesiqhelo lwesiqalo. Ukurekhoda kwi-USB Stick:
   1.  Faka i-USB Stick kwizibuko kwicandelo IREKHODI kwaye ucinezele i VIEW iqhosha.
   2. Sebenzisa iphepha lesibini ukulungiselela umshicileli.
   3.  Cinezela ulawulo olujikelezayo lwesihlanu phantsi kwesikrini ukuqalisa ukurekhoda.
   4. Sebenzisa ulawulo lokuqala lokujikeleza ukumisa. Lindela isibane se-ACCESS sicime phambi kokuba ususe intonga.
      Amanqaku:
      Intonga mayifomathelwe iFAT file inkqubo. Elona xesha liphezulu lerekhodi limalunga neeyure ezintathu kumntu ngamnye file, kunye a file umda wesayizi we-2 GB. Ukurekhoda kuku-16-bit, 44.1 kHz okanye 48 kHz ngokuxhomekeke kwi-console s.ampumyinge.

Umzobo weBhloko

Iinkcukacha zobugcisa

Imijelo yokuLungiselela igalelo	I-32 ye-Input Channels, i-8 Aux Channels, i-8 FX yokuBuyisa iziteshi
Imijelo yokuLungiselela imveliso	8/16
Iibhasi ezili-16, iimatriki ezi-6, ii-LRC eziphambili	100
IiNjini zeempembelelo zangaphakathi (Isitiriyo esiyiNyaniso I Mono)	8/16
Umboniso ozenzekelayo wangaphakathi (Iimpawu ezicwangcisiweyo/ iziqwengana)	500 / 100
Izehlo zokuKhumbula zaNgaphakathi zizonke (ibandakanya i-Preampiilifi kunye neeFaders)	100
Ukwenziwa Kwemiqondiso	40-Bit Indawo edadayo
I-AID Uguqulo (8-channel, 96 kHz ilungile)	24-Bit, 114 dB Dynamic Range, A-weighted
I-D/A Conversion (i-stereo, i-96 kHz ilungile)	24-Bit, 120 dB Dynamic Range, A-weighted
1/0 Ukubambezeleka (Igalelo leConsole kwisiphumo)	0.8 ms
Ukubambezeleka kweNethiwekhi (Stage Ibhokisi Kwi> Console> Stage Box Out)	1.1 ms

MIDAS PRO Series Microphone PreampiLifier (XLR)	16
Ungeniso lweMibhobho yeTalkback (XLR)	1
Igalelo/Iziphumo zeRCA	2/2
Iziphumo zeXLR	8
Iziphumo zokubek'esweni (XLR / ¼” TRS iGlanced)	2/2
I-Aux Inputs/IziPhumo(¼” TRS iGlanced)	6/6
Imveliso yeeFowuni(¼” TRS)	1 (Istiriyo)
Amazibuko e-AES50 (KLARK TEKNIK SuperMAC)	2
Ukwandiswa kweKhadi lokusebenzelana	32 Igalelo lomsindo weSitishi/Isiphumo
Isidibanisi se-ULTRANET P-16 (Akukho Mandla aNikiweyo)	1
Igalelo / Iziphumo zeMIDI	1 / 1
I-USB Type A (Audio and Data Import/ Export)
I-USB Type B, indawo yolawulo yangasemva, yolawulo olukude
I-Ethernet, i-RJ45, ipaneli yangasemva, yolawulo olukude

Yila	MIDAS PRO Series
I-THD+N (inzuzo ye-O dB, imveliso ye-0 dBu)	<0.01% ingenasisindo
THD+N (+40 dB inzuzo, O dBu ukuya +20 dBu imveliso)	<0.03% ingenasisindo
Ukuphazamiseka kweNgeniso (Engalungelelananga/ iBalanced)	10k0/10k0
INqanaba leNgeniso eliNgena-Clip Elona Liphezulu	+23 dBu
Phantom Power (Twitchable per Input)	+48V
INgeniso elinganayo ingxolo @ +45 dB inzuzo (150 0 umthombo)	-125 dBu 22 Hz-22 kHz, engenabunzima
CMRR@ Inzuzo yoManyano (Eqhelekileyo)	> 70dB
CMRR@ 40 dB Inzuzo (Eqhelekileyo)	> 90dB

Ingxelo yeFcc

ithobela imithetho yeFCC njengoko kuchaziwe kulo mhlathi ulandelayo:
Esi sixhobo sivavanyiwe kwaye sifunyenwe ukuthobela imida yeDivaysi yeDijithali yeKlasi A, ngokulandela inxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi xa isixhobo sisebenza kwindawo yorhwebo. Esi sixhobo sivelisa, sisebenzisa, kwaye sinokusasaza amandla erediyo yerediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nencwadana yemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Ukusebenza kwesi sixhobo kwindawo yokuhlala kusenokubangela uphazamiseko oluyingozi kwimeko apho umsebenzisi kuya kufuneka alungise uphazamiseko ngeendleko zakhe.
Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1.  Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
2.  Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela ukusebenza okungafunekiyo.

Isilumkiso:
Ukusebenza kwesi sixhobo kwindawo yokuhlala kunokubangela uphazamiseko lukanomathotholo.

Amaxwebhu / Izibonelelo

I-MIDAS M32R LIVE I-Digital Console ye-Live kunye ne-Studio kunye ne-40 yeendlela zokuNgena [pdf] Isikhokelo somsebenzisi I-M32R LIVE, i-Digital Console ye-Live kunye ne-Studio kunye nama-Input Channels angama-40

Iimbekiselo

• Incwadi yokusebenzisa