MIDAS M32R LIVE Digital Console don Live da Studio tare da Tashoshin shigarwa 40

Muhimmin Umarnin Tsaro

Tashoshin da aka yiwa alama da wannan alamar suna ɗauke da isassun wutar lantarki Yi amfani da igiyoyin lasifikan ƙwararrun ƙwararrun kawai tare da ¼” TS ko kuma an riga an shigar da filogi masu kulle-kulle. Duk sauran shigarwa ko gyare-gyare yakamata a yi ta ƙwararrun ma'aikata kawai. Wannan alamar, duk inda ta bayyana, tana faɗakar da kai ga kasancewar shinge - voltage wanda zai iya isa ya zama haɗarin girgiza. Wannan alamar, duk inda ta bayyana, tana faɗakar da ku zuwa mahimman umarni na aiki da kulawa a cikin Babu sassan da za a iya amfani da mai amfani a ciki. Koma hidima ga ƙwararrun ma'aikata.

Tsanaki
Don rage haɗarin wuta ko girgiza wutar lantarki, kar a fallasa wannan na'urar ga ruwan sama da danshi. Kada a fallasa na'urar ga ɗigowa ko watsa ruwa kuma babu wani abu da aka cika da ruwa, kamar vases, da za a sanya a kan na'urar.

Tsanaki
Waɗannan umarnin sabis ɗin na ƙwararrun ma'aikatan sabis ne kawai don amfani.Don rage haɗarin girgiza wutar lantarki kar a yi kowane sabis banda wanda ke ƙunshe a cikin umarnin aiki. ƙwararrun ma'aikatan sabis ne su yi gyare-gyare.

1.  Karanta waɗannan umarnin.
2.  A kiyaye waɗannan umarnin.
3.  Ku kula da duk gargaɗin.
4. Kar a kayar da manufar aminci na filogi mai kauri ko ƙasa. Filogi na polarized yana da ruwan wukake guda biyu tare da fiɗa ɗaya fiye da ɗayan. Filogi mai nau'in ƙasa yana da ruwan wukake guda biyu da na ƙasa na uku.
5. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin da aka daina amfani da shi. Filogi na polarized yana da ruwan wukake guda biyu tare da fiɗa ɗaya fiye da ɗayan.
6. Filogi mai nau'in ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin da aka daina amfani da shi. Yi amfani da haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
7. Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ƙayyade, ko sayar da na'ura.
8. Lokacin da ake amfani da keken keke, yi amfani da taka tsantsan lokacin motsi haɗin keke/kayan don guje wa rauni daga faɗuwa. Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
9.  Za a haɗa na'urar zuwa madaidaicin soket na MAINS tare da haɗin ƙasa mai karewa.
10.  Inda aka yi amfani da filogi na MAINS ko na'urar haɗa kayan aiki azaman na'urar cire haɗin, na'urar cire haɗin za ta kasance cikin sauƙin aiki.
11.  Daidai zubar da wannan
    samfur: Wannan alamar tana nuna cewa ba dole ba ne a zubar da wannan samfurin tare da sharar gida, bisa ga umarnin WEEE (2012/19/EU) da dokar ku ta ƙasa. Ya kamata a kai wannan samfurin zuwa cibiyar tattarawa mai lasisi don sake yin amfani da kayan lantarki da na lantarki (EEE). Rashin sarrafa irin wannan sharar na iya yin mummunan tasiri ga muhalli da lafiyar ɗan adam saboda abubuwa masu haɗari.
12. Da fatan za a tuna da abubuwan muhalli na zubar da baturi. Dole ne a zubar da batura a wurin tarin baturi.
13. Yi amfani da wannan na'urar a cikin wurare masu zafi da/ko matsakaicin yanayi.

RA'AYIN DOKA

MUSICTribe bai yarda da wani alhaki ga duk wani hasara wanda kowane mutum zai iya fuskanta wanda ya dogara ko dai gabaɗaya ko a wani ɓangare kan kowane kwatance, hoto, ko bayanin da ke ƙunshe a ciki. Bayanan fasaha, bayyanuwa da sauran bayanai suna iya canzawa ba tare da sanarwa ba. Duk alamun kasuwanci mallakin masu su ne. MIDAS, KLARKTEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA da COOLAUDIO alamun kasuwanci ne ko alamun kasuwanci masu rijista na MUSIC Group IP Ltd.
MUSIC Group IP Ltd. 2018 Duk haƙƙin mallaka.

GARANTI MAI KYAU

Don sharuɗɗan garanti da sharuɗɗa
da ƙarin bayani game da garanti na MUSIC Tribe's Limited, da fatan za a duba cikakkun bayanai akan layi a music-group.com/garanti.

Bayani mai mahimmanci

1.  Yi rijista akan layi. Da fatan za a yi rajistar sabon kayan aikin MUSIC ɗin ku daidai bayan siyan ta ta ziyartar midasconsoles.com. Rijista siyan ku ta amfani da fom ɗinmu mai sauƙi na kan layi yana taimaka mana don aiwatar da da'awar gyara ku cikin sauri da inganci. Hakanan, karanta sharuɗɗan garantinmu, idan an zartar.
2.  Rashin aiki. Idan mai siyar da Izinin Ƙabilar ku na MUSIC ba zai kasance a kusa da ku ba,
   Kuna iya tuntuɓar Mai Cika Izin Ƙabilar MUSIC don ƙasarku da aka jera a ƙarƙashin "Taimako" a midasconsoles.com. Idan ba a jera ƙasar ku ba, da fatan za a bincika idan za a iya magance matsalar ku ta hanyar “Tallafin Kan Kan layi” wanda kuma ana iya samunsa ƙarƙashin “Taimako” a midasconsoles.com. A madadin, da fatan za a ƙaddamar da da'awar garantin kan layi a midasconsoles.com KAFIN mayar da samfur.
3.  Haɗin Wuta. Kafin shigar da naúrar a cikin soket ɗin wuta, da fatan za a tabbatar kana amfani

Sarrafa Sarrafa

1. AKAN FIG/PREAMP - Daidaita preamp riba don tashar da aka zaɓa tare da GAIN rotary control. Latsa maɓallin 48 V don amfani da ikon fatalwa don amfani tare da microphones na na'ura kuma danna maɓallin 0 don juyawa yanayin tashar. Mitar LED tana nuna matakin da aka zaɓa. Danna maɓallin LOW CUT kuma zaɓi mitar wucewa da ake so don cire ƙarancin da ba'a so. Danna maɓallin VIEW button don samun damar ƙarin cikakkun sigogi akan Babban Nuni.
2. GATE/DYNAMICS - Danna maɓallin GATE
3. EQUALIZER – Danna maɓallin EQ don haɗa wannan sashe. Zaɓi ɗaya daga cikin maƙallan mitar guda huɗu tare da LOW, LO MID,
4. HI MID da maɓallan HIGH. Danna maɓallin MODE don zagayawa ta nau'ikan EQ da ke akwai. Ƙara ko yanke mitar da aka zaɓa tare da ikon jujjuya GAIN. Zaɓi ƙayyadaddun mitar da za a daidaita tare da FREQUENCY mai juyi juyi kuma daidaita bandwidth na mitar da aka zaɓa tare da ikon juyawa na WIDTH. Danna maɓallin VIEW maballin don samun damar ƙarin cikakkun bayanai
5. CTI MONITOR - Daidaita matakin abubuwan da aka fitar tare da sarrafa juzu'i LEVEL LEVEL. Daidaita matakin fitowar belun kunne tare da sarrafa juzu'i LEVEL LEVEL. Danna maɓallin MONO don saka idanu akan sautin a cikin mono. Danna maɓallin DIM don rage ƙarar mai saka idanu. Danna maɓallin VIEW button don daidaita adadin ragi tare da duk sauran ayyukan da suka shafi saka idanu.
6. Cil RECORDER – Haɗa sandar žwažwalwar ajiya na waje don shigar da sabunta firmware, kaya da
7. BABBAN BUS - Latsa MONO CENTER ko MAIN STEREO maɓallan don sanya tashar zuwa babban motar mono ko sitiriyo. Lokacin da aka zaɓi MAIN STEREO (motar sitiriyo), PAN/BAL yana daidaitawa zuwa matsayi na hagu zuwa dama. Daidaita matakin aikawa gaba ɗaya zuwa bas ɗin guda ɗaya tare da ikon juyawa na M/C LEVEL. Latsa VIEW button don samun damar ƙarin cikakkun sigogi akan Babban Nuni.
8. MAGANIN NUNAWA - Mafi yawan ikon M32R ana iya shirya shi da sanya ido ta Babban Nuni. Lokacin da VIEW an danna maɓallin akan kowane ɗayan ayyukan kwamitin kulawa, anan ne zasu iya zama viewed. Hakanan ana amfani da babban nunin don samun damar tasirin tasirin 60+. Dubi sashe na 3. Babban Nuni.
9. ASSIGN – Sanya sarrafawar jujjuya huɗu zuwa sigogi daban-daban don samun damar kai tsaye
   zuwa ayyukan da aka saba amfani da su. Nuniyoyin LCD suna ba da tunani mai sauri ga ayyukan da ake yi na Layer mai aiki na sarrafa al'ada. Sanya kowane maɓallan ASSIGN na al'ada guda takwas (mai lamba 5- zuwa sigogi daban-daban don samun dama ga ayyukan da aka saba amfani da su nan take. Latsa ɗaya daga cikin maɓallan SET don kunna ɗaya daga cikin nau'ikan sarrafawa uku na al'ada. Da fatan za a koma zuwa littafin mai amfani don ƙarin cikakkun bayanai kan wannan. batu.
10. LAYER ZABA - Danna ɗayan maɓallan masu zuwa zaɓi zaɓin takaddar da ta dace akan tashar da ta dace:
    •  INPUTS 1-8, 9-16, 17-24 & 25-36- na farko, na biyu, na uku da na hudu na tashoshi takwas da aka sanya akan shafin ROUTING/HOME
    •  FX RET - yana ba ku damar daidaita matakan tasirin sakamako.
    •  AUX IN / USB - toshe na biyar na tashoshi shida & Mai rikodin USB, da tashar FX takwas ta dawo (1L… 4R)
    •  BUS 1-8 & 9-16- wannan yana ba ku damar daidaita matakan 16 Mix Bus Masters, wanda ke da amfani yayin haɗa da Masters Bus zuwa ayyukan ƙungiyar DCA, ko lokacin haɗa bas zuwa matrices 1-6.
    •  REM – DAW Maɓallin Nesa - Danna wannan

Rear Panel

1. LITTAFIN KYAUTA / KAYAN KWAKWALWA
   haɗa biyu na masu saka idanu na studio ta amfani da
2. XLR ya da ¼”
   igiyoyi. Hakanan ya haɗa da 12 V / 5 W lamp haɗi.
3. AUX IN/FITA 
   Haɗa zuwa kuma daga kayan aiki na waje ta hanyar¼” ko igiyoyin RCA.
4. GABATARWA 1 -16
   Haɗa hanyoyin sauti (kamar microphones ko tushen matakin layi) ta igiyoyin XLR.
5. WUTA
   IEC mains soket da
6. KASHE/KASHE
   canza
7. FITOWA TA 1 - 8
   Aika sauti na analog zuwa kayan aiki na waje ta amfani da igiyoyin XLR. Fitowa 15 da 16 ta tsohuwa suna ɗaukar siginar bas na sitiriyo.
8. DN32-KAtin INTERFACE LIVE
   Aika har zuwa tashoshi 32 na audio zuwa ko daga kwamfuta ta USB 2.0, da kuma yin rikodin har zuwa tashoshi 32 zuwa katunan SD/SDHC. GABATARWA MAI NASARA- Haɗa zuwa PC don sarrafa ramut ta hanyar kebul na Ethernet.
9. ULTRANET 
   Haɗa zuwa tsarin sa ido na sirri, kamar BEHRINGER P16, ta hanyar kebul na Ethernet.
10. AESSO A/B 
    Isar da har zuwa tashoshi 96 ciki da waje ta igiyoyin Ethernet. Da fatan za a koma zuwa littafin mai amfani don ƙarin bayani kan kowane ɗayan waɗannan batutuwa.

1. NUNA KYAUTA 
   Ana amfani da abubuwan sarrafawa a cikin wannan sashe tare da allon launi don kewayawa da sarrafa abubuwan zanen da ya ƙunshi. Ta hada da kwazo controls Rotary wanda yayi dace da kusa controls akan allon, kazalika da hada da siginan kwamfuta buttons, mai amfani iya sauri kewaya da sarrafa duk na launi allo ta element.The launi allo ya ƙunshi daban-daban nuni da cewa ba da gani feedback ga aiki na na'ura wasan bidiyo, da kuma ba da damar mai amfani don yin gyare-gyare daban-daban waɗanda ba a samar da su ta hanyar sarrafa kayan aikin da aka keɓe ba.
2. CD MAIN/SOLO METERS
   Wannan mita 24 mai kashi uku yana nuna matakin siginar sauti daga babbar motar bas, da kuma babbar cibiyar ko motar solo na kayan wasan bidiyo.
3. MAGANIN ZABE FATA
   Waɗannan maɓallan haske guda takwas suna ba mai amfani damar kewayawa kai tsaye zuwa kowane ɗayan manyan allo guda takwas waɗanda ke magance sassa daban-daban na na'ura wasan bidiyo.
4. Sassan da za su iya zama Sama/KASA/Hagu/KASHIN KWANKWASO NA DAMA-Hagu da Dama
   sarrafawa yana ba da damar kewayawa hagu-dama tsakanin shafuka daban-daban waɗanda ke ƙunshe cikin saitin allo. Nunin shafi na hoto yana nuna wane shafin da kuke a halin yanzu. A wasu fuska akwai ƙarin sigogi da ke akwai fiye da yadda za a iya daidaita su ta hanyar sarrafa jujjuyawar shida da ke ƙasa. A waɗannan lokuta, yi amfani da maɓallan UP da DOWN don kewaya cikin kowane ƙarin yadudduka da ke cikin shafin allo. Ana amfani da maɓallan HAGU da DAMA wani lokaci don tabbatarwa ko soke fafutukan tabbatarwa. Da fatan za a koma zuwa littafin mai amfani don ƙarin bayani kan kowane ɗayan waɗannan batutuwa.
   •  LABARI - LABARAI
     allo yana ba da damar lodawa da adana saitin da aka saba amfani da su don abubuwan shigar tashoshi, masu sarrafa tasirin tasiri, da yanayin tafiyarwa. Allon LIBRARY yana ƙunshe da shafuka masu zuwa: tashar: Wannan shafin yana bawa mai amfani damar lodawa da adana abubuwan da aka saba amfani da su na sarrafa tashar, gami da haɓakawa da daidaitawa. Tasiri: Wannan shafin yana bawa mai amfani damar lodawa da adana saitattun na'urori masu amfani da tasiri. routing: Wannan shafin yana bawa mai amfani damar lodawa da adana hanyoyin sigina da aka saba amfani da su.
   •  ILLOLIN- ILLOLIN
     allo yana sarrafa bangarori daban-daban na na'urori masu sarrafa tasiri guda takwas. A kan wannan allon mai amfani zai iya zaɓar takamaiman nau'ikan tasiri don na'urori masu sarrafa tasirin ciki guda takwas, daidaita hanyoyin shigar su da fitarwa, saka idanu matakan su, da daidaita sigogin tasirin daban-daban. Allon EFFECTS ya ƙunshi shafuka daban-daban masu zuwa: gida: Allon gida yana ba da gabaɗayaview na rakodin tasirin tasiri, yana nuna irin tasirin da aka saka a cikin kowane ramuka takwas, da kuma nuna hanyoyin shigarwa / fitarwa don kowane ramin da matakan siginar 1/0.
   •  Waɗannan fuskokin biyu masu jujjuya suna nuna duk abubuwan da suka dace don masu sarrafa abubuwa daban-daban guda takwas, suna bawa mai amfani damar daidaita dukkan sigogi don zaɓin sakamako.
   • SETUP- The SETUP
     allo yana ba da iko don ayyukan duniya masu girma na na'ura wasan bidiyo, kamar daidaitawar nuni, sample rates & aiki tare, saitunan mai amfani, da saitin hanyar sadarwa. Allon SETUP ya ƙunshi shafuka daban-daban masu zuwa: duniya: Wannan allon yana ba da gyare-gyare
   • cibiyar sadarwa: Wannan allon yana ba da sarrafawa daban-daban don haɗa na'ura mai kwakwalwa zuwa daidaitaccen hanyar sadarwar Ethernet. (Adireshin IP, Mask ɗin Subnet, Ƙofar.) tsiri mai rubutu: Wannan allon yana ba da sarrafawa don gyare-gyare daban-daban na sassan rubutun LCD na na'ura wasan bidiyo. kafinamps: Yana nuna ribar analog don shigarwar mic na gida (XLR a baya) da ikon fatalwa, gami da saitin daga s mai nisa.tage kwalaye (misali DL16) an haɗa ta AESSO. katin: Wannan allon yana zaɓar tsarin shigarwa/ fitarwa na katin dubawa da aka shigar.
   •  LABARI 
     Nuna ayyukan Sashen MONITOR akan Babban Nuni.
   •  MUHIMMANCI 
     Ana amfani da wannan ɓangaren don adanawa da tunatar da al'amuran atomatik a cikin na'ura mai kwakwalwa, wanda ya ba da damar sake tsara abubuwa daban-daban a wani lokaci daga baya. Da fatan za a koma ga Jagorar Mai amfani don ƙarin bayani kan wannan batun.
   •  MUTE GRP- MUTE GRP
     allon yana ba da damar aiki mai sauri da sarrafa ƙungiyoyin bebe guda shida na na'ura wasan bidiyo, kuma yana ba da ayyuka daban-daban: Yana kashe allon aiki yayin aiwatar da sanya tashoshi zuwa ƙungiyoyin bebe. Wannan yana tabbatar da cewa babu tashoshi da aka soke ba da gangan ba yayin aiwatar da aiki yayin wasan kwaikwayon kai tsaye. Yana ba da ƙarin keɓancewa don ɓata/cire gunguni ban da maɓallan ƙungiyar bebe da aka keɓe a ƙasan na'ura wasan bidiyo.
   •  AMFANIN - UILITY
     allo wani ƙarin allo ne da aka ƙera don yin aiki tare tare da sauran allon da ka iya kasancewa a ciki view a kowane lokaci na musamman. Allon UILITY ba a taɓa ganin kansa ba, koyaushe yana wanzuwa a cikin

Gyara LCDs na Channel

1.  Riƙe maɓallin zaɓi don tashar da kuke so ku canza ta latsa UTILITY.
2. Yi amfani da sarrafawar juyawa ƙasa da allo don daidaita sigogi.
3. Hakanan akwai keɓaɓɓun shafin Scribble Strip akan menu na SETUP.
4.  Zaɓi tashar yayin viewshiga wannan allon don gyarawa.

Amfani da Motoci
Saitin Bus:
M32R yana ba da matuƙar sassauƙar bus kamar yadda kowane tashar bas ɗin ke aikawa na iya zama Pre-or Post-Fader, (ana iya zaɓar shi cikin nau'i-nau'i na bas). Zaɓi tashar kuma latsa VIEW a cikin BUS SENDS a kan tashar tashar.Bayyana zaɓuɓɓuka don Pre/Post/Subgroup ta latsa maɓallin kewayawa ƙasa ta allon. Don saita bas a duniya, danna maɓallin SEL sannan kuma latsa VIEW akan CON FIG/PREAMP sashe a kan tsiri na tashar. Yi amfani da iko na rotary na uku don canza saiti. Wannan zai shafi duk tashar da aka aika zuwa wannan bas ɗin. Lura: Za'a iya haɗa motocin bas ɗin a cikin nau'i-nau'i-ko da maƙwabta don samar da bas ɗin sitiriyo. Don haɗa bas ɗin tare, zaɓi ɗaya kuma danna maɓallin VIEW maballin kusa da CON FIG/PREAMP sashin tsiri na tashar. Latsa ikon juyawa na farko don haɗawa. Lokacin aikawa zuwa waɗannan motocin bas, m BUS SEND sarrafawar juyi zai daidaita matakin aikawa har ma BUS SEND sarrafawar juyawa zai daidaita kwanon/ma'auni.

Haɗin Matrix
Ana iya ciyar da haɗe-haɗen Matrix daga kowace bas ɗin haɗaɗɗiya da kuma BABBAN LR da bas na Centre/Mono. Don aikawa zuwa Matrix, da farko danna maɓallin SEL sama da bas ɗin da kake son aikawa. Yi amfani da sarrafawar jujjuyawar guda huɗu a cikin sashen SAURAN BUS na tashar

Sabunta Firmware & Rikodi na Sanda USB

1.  Zazzage sabon firmware daga shafin samfurin M32R akan matakin tushen sandar ƙwaƙwalwar USB.
2. Latsa ka riƙe ɓangaren RECORDER VIEW button yayin kunna na'ura wasan bidiyo don shigar da yanayin ɗaukakawa.
3. Toshe sandar ƙwaƙwalwar USB ɗin a saman mahaɗin kebul na USB.
4.  M32R zai jira kebul ɗin USB ya zama a shirye sannan ya gudanar da ɗaukaka aikin firmware mai sarrafa kansa gabaɗaya.
5.  Lokacin da kebul na USB ya gaza shiryawa, ɗaukakawa ba zai yiwu ba kuma muna ba da shawarar sake kunna na'urar don kunna firmware na baya.
6. mintuna fiye da jerin taya na yau da kullun. Don yin rikodin zuwa sandar USB:
   1.  Saka USB Stick a cikin tashar jiragen ruwa akan ɓangaren RECORDER sannan danna maɓallin VIEW maballin.
   2. Yi amfani da shafi na biyu don daidaitawa mai rikodin.
   3.  Latsa ikon juyawa na biyar ƙarƙashin allon don fara rikodi.
   4. Yi amfani da ikon juyawa na farko don tsayawa. Jira wutar ACCESS ta kashe kafin cire sandar.
      Bayanan kula:
      Dole ne a tsara sanda don FAT file tsarin. Matsakaicin lokacin rikodin shine kusan awa uku ga kowane file, da a file iyakar girman 2 GB. Rikodi yana kan 16-bit, 44.1 kHz ko 48 kHz dangane da s consoleampku rate.

Tsarin zane

Bayanan fasaha

Tashoshin sarrafa Input	Tashoshin Input 32, Tashoshin Aux 8, Tashoshin dawowa na FX 8
Hanyoyin sarrafa kayan fitarwa	8/16
Motocin bas 16, awanni 6, babban LRC	100
Ingin Tasirin Cikin Gida (Gaskiya Sitiriyo I Mono)	8/16
Nunin Ciki Automation (Tsarin Alamu/Snippets)	500/100
Yanayin Tunawa na Cikin Gida (ciki har da Preamplifiers da Faders)	100
Sarrafa sigina	40-Bit Shafin Shawagi
AID Juyawa (tashar 8, shirye 96 kHz)	24-Bit, 114 dB Dynamic Range, A-mai nauyi
D / A Chanza (sitiriyo, 96 kHz a shirye)	24-Bit, 120 dB Dynamic Range, A-mai nauyi
1/0 Latency (Input Console zuwa Fitarwa)	0.8 ms
Latency na cibiyar sadarwa (Stage Akwatin A> Console> Stage Box Out)	1.1 ms

MIDAS PRO Series Microphone Preampmai kunnawa (XLR)	16
Input Microphone Input (XLR)	1
Abubuwan shigar da RCA / Abubuwan fitarwa	2/2
Sakamakon XLR	8
Abubuwan Kulawa (XLR / ¼ ”TRS Daidaita)	2/2
Abubuwan Shiga/Sakamako (¼” TRS Balanced)	6/6
Fitar Waya (¼” TRS)	1 (Stereo)
Tashar jiragen ruwa na AES50 (KLARK TEKNIK SuperMAC)	2
Hanyoyin Fadada Katin	32 Channel Audio Input/ Fitarwa
ULTRANET P-16 Mai haɗawa (Ba a Ba da Wuta)	1
Abubuwan shigar da MIDI/Fitarwa	1/1
Nau'in USB A (Audio da Shigo da Bayanai)
Nau'in USB B, na baya, don sarrafa nesa
Ethernet, RJ45, komitin baya, don sarrafa ramut

Zane	MIDAS PRO Series
THD+N (O dB riba, 0 dBu fitarwa)	<0.01% mara nauyi
THD+N (+40 dB riba, O dBu zuwa +20 dBu fitarwa)	<0.03% mara nauyi
Ƙarfin shigar da shigar (Ba a daidaita / Ma'auni)	10k0/10k0
Matsayin Matsakaicin Matsakaicin Matsakaicin Matsakaici	+ 23 dBu
Ntarfin Fatalwa (Sauyawa ta Input)	+48V
Daidaita Hayaniyar Shigar @ +45 dB riba (tushen 150 0)	-125 dBu 22 Hz-22 kHz, mara nauyi
CMRR @ Riba Haɗin kai (Na al'ada)	> 70dB
CMRR@ 40 dB Riba (Na Musamman)	> 90dB

Bayanin Fcc

ya bi ka'idodin FCC kamar yadda aka ambata a cikin sakin layi mai zuwa:
An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class A, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa lokacin da ake sarrafa kayan aiki a cikin yanayin kasuwanci. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma aka yi amfani da shi daidai da littafin koyarwa, na iya haifar da kutse mai cutarwa ga sadarwar rediyo. Yin aiki da wannan kayan aiki a wurin zama na iya haifar da tsangwama mai cutarwa wanda idan mai amfani zai buƙaci ya gyara tsangwamar da kuɗin kansa.
Wannan kayan aikin ya dace da Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1.  Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2.  Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

Gargadi:
Yin aiki da wannan kayan aiki a muhallin zama na iya haifar da katsalandan na rediyo.

Takardu / Albarkatu

MIDAS M32R LIVE Digital Console don Live da Studio tare da Tashoshin shigarwa 40 [pdf] Jagorar mai amfani M32R LIVE, Digital Console don Live da Studio tare da Tashoshin shigarwa 40

Magana

• Manual mai amfani