Litaba pata
1 BA LAOLI BA TECH EU-I-1 Boemo ba Leholimo ba Busetsang Motsoako oa Motsoako oa Valve
2 Tlhahisoleseding ya Sehlahiswa
3 POLOKO
4 TLHALOSO SEBAKA
5 MOKHOA OA HO KENYA
6 MOKHOA OA HO SEBELISA MOLAOLI
7 TS'IRELETSO LE TSOSO
8 LIEKETSENG MOTS'OANE
9 PHATLATSO EA EU EA TUMELO
10 Litokomane / Lisebelisoa
10.1 Litšupiso
11 Related Posts

TECH-LAOLI-Letšoao

BA LAOLI BA TECH EU-I-1 Boemo ba Leholimo ba Busetsang Motsoako oa Motsoako oa Valve

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Product

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

  • Mohlala: EU-I-1
  • Letsatsi la Qetello: 23.02.2024
  • Tokelo ea Moetsi: Hlahisa liphetoho ho sebopeho
  • Lisebelisoa tse ling: Lipapiso li ka kenyelletsa lisebelisoa tse eketsehileng
  • Theknoloji ea ho hatisa: E ka hlahisa phapang ea mebala e bontšitsoeng

Tlhaloso ea Sesebelisoa
EU-I-1 ke sesebelisoa sa taolo se sebelisetsoang ho laola likarolo tse fapaneng tsamaisong ea ho futhumatsa.

Mokhoa oa ho kenya
Molaoli o lokela ho kenngoa ke motho ea tšoanelehang ho thibela likotsi leha e le life tsa ts'oaetso ea motlakase kapa tšenyo ho molaoli. Netefatsa hore motlakase oa tima pele o kenya.

ExampLeano la Tlhophiso:

  1. Seqhubu
  2. Pompo ea valve
  3. Sensor ea valve
  4. Khutlisa sensor
  5. Sensor ea boemo ba leholimo
  6. CH sensor ea boiler
  7. Molaoli oa kamore

Mokhoa oa ho Sebelisa Controller
Molaoli o na le likonopo tse 4 bakeng sa ts'ebetso:

  • ETSOA: E sebelisetsoa ho bula skrine view phanele ya kgetho kapa o tswe ho menu.
  • MINUS: E fokotsa mocheso oa li-valve tse behiloeng esale pele kapa e tsamaea ka har'a likhetho tsa menyetla.
  • PLUS: E eketsa mocheso oa li-valve tse behiloeng esale pele kapa e tsamaea ka har'a likhetho tsa menyetla.
  • MENU: E kenya menu ebe e netefatsa di-setting.

CH skrine
Lintlha tse qaqileng mabapi le skrine ea CH le mokhoa oa ts'ebetso ea molaoli li hlahisoa mona.

Lipotso tse atisang ho botsoa (FAQ)

  • P: Ke etsa joang ho tsosolosa molaoli ho litlhophiso tsa fektheri?
    A: Ho seta botjha ho li-setting tsa feme, ea ho li-menu tsa li-setting 'me u batle khetho ea ho seta bocha. Netefatsa ketso ea ho khutlisetsa sesebelisoa maemong a sona a mantlha.
  • P: Ke lokela ho etsa eng haeba molaoli a bontša molaetsa oa phoso?
    K: Haeba molaoli a bontša molaetsa oa phoso, sheba bukana ea mosebelisi bakeng sa mehato ea ho rarolla mathata. Lekola likhokahano le phepelo ea motlakase ho netefatsa ts'ebetso e nepahetseng.

POLOKO

Pele o sebelisa sesebelisoa ka lekhetlo la pele mosebelisi o lokela ho bala melao e latelang ka hloko. Ho se mamele melao e kenyellelitsoeng bukaneng ena ho ka lebisa likotsing tsa motho kapa tšenyo ea molaoli. Bukana ea mosebelisi e lokela ho bolokoa sebakeng se sireletsehileng bakeng sa ho sebelisoa hape. Ho qoba likotsi le liphoso ho lokela ho netefatsoa hore motho e mong le e mong ea sebelisang sesebelisoa o itloaetse molao-motheo oa ts'ebetso hammoho le mesebetsi ea ts'ireletso ea molaoli. Haeba sesebelisoa se lokela ho rekisoa kapa ho beoa sebakeng se seng, etsa bonnete ba hore bukana ea mosebelisi e teng le sesebelisoa e le hore mosebelisi ofe kapa ofe ea ka bang teng a ka fumana lintlha tsa bohlokoa mabapi le sesebelisoa.

Moetsi ha a amohele boikarabello bakeng sa likotsi leha e le life kapa tšenyo e bakoang ke ho se tsotelle; ka hona, basebelisi ba tlamehile ho nka mehato e hlokahalang ea polokeho e thathamisitsoeng bukaneng ena ho sireletsa bophelo ba bona le thepa ea bona.

TLHOKOMELO 

  • Vol e phahamengtage! Etsa bonnete ba hore molaoli o khaotsoe ho mains pele a etsa mesebetsi efe kapa efe e amanang le phepelo ea motlakase (ho kenya likhoele, ho kenya sesebelisoa, jj.)
  • Setsebi sa motlakase se tšoanelehang se lokela ho kenya sesebelisoa.
  • Pele o qala molaoli, mosebelisi o lokela ho lekanya khanyetso ea lefats'e ea li-motor tsa motlakase hammoho le ho hanyetsa ha likhoele.
  • Molaoli ha oa lokela ho sebetsoa ke bana.

TLHOKOMELO 

  • Sesebelisoa se ka senyeha haeba se otloa ke lehalima. Etsa bonnete ba hore polaka e khaotsoe phepelong ea motlakase nakong ea sefefo.
  • Tšebeliso efe kapa efe ntle le e boletsoeng ke moetsi e thibetsoe.
  • Pele le nakong ea nako ea ho futhumatsa, molaoli o lokela ho hlahlojoa ho bona boemo ba lithapo tsa eona. Mosebelisi o boetse o lokela ho hlahloba hore na molaoli o kentsoe hantle le ho e hloekisa haeba e le lerole kapa e litšila.

Liphetoho ho thepa e hlalositsoeng bukeng ea tataiso e kanna ea hlahisoa kamora hore e phetheloe ka 23.02.2024. Moetsi o na le tokelo ea ho hlahisa liphetoho mohahong. Lipapiso li ka kenyelletsa lisebelisoa tse eketsehileng. Theknoloji ea ho hatisa e ka etsa hore ho be le phapang ea mebala e bontšitsoeng.

Re ikemiseditse ho sireletsa tikoloho. Ho etsa lisebelisoa tsa elektroniki ho tlisa tlamo ea ho fana ka ts'ireletso ea tikoloho ea lisebelisoa le lisebelisoa tsa elektroniki tse sebelisitsoeng. Kahoo, re kentsoe rejisetarang e bolokiloeng ke Tlhahlobo ea Tšireletso ea Tikoloho. Letšoao la moqomo o tšetsoeng holim'a sehlahisoa le bolela hore sehlahisoa se se ke sa lahleloa ka har'a lijana tsa litšila tsa ntlo. Ho tsosolosa litšila ho thusa ho sireletsa tikoloho. Mosebelisi o tlamehile ho fetisetsa lisebelisoa tsa hae tse sebelisitsoeng sebakeng sa pokello moo likarolo tsohle tsa motlakase le tsa elektroniki li tla sebelisoa hape.

TLHALOSO SEBAKA

EU-i-1 thermoregulator e reretsoe ho laola valve ea ho kopanya tse tharo kapa tse 'nè ka monyetla oa ho kopanya pompo e eketsehileng ea valve. Ka boikhethelo, molaoli a ka sebelisana le li-valve tse peli EU-i-1, EU-i-1M, kapa ST-431N e etsang hore ho khonehe ho laola ho fihla ho li-valve tsa 3 tse kopanyang. Taolo e na le taolo e thehiloeng ho boemo ba leholimo le kemiso ea taolo ea beke le beke mme e ka sebelisana le molaoli oa kamore. Letlotlo le leng la sesebelisoa ke ts'ireletso ea mocheso oa ho khutla khahlano le metsi a batang haholo a khutlelang ho boiler ea CH.

Mesebetsi e fanoang ke molaoli: 

  • Taolo e boreleli ea valve ea litsela tse tharo kapa tse 'nè
  • Taolo ea pompo
  • Ho laola li-valve tse ling tse peli ka li-valve tse eketsehileng (mohlala, ST-61v4, EU-i-1)
  • Monyetla oa ho hokela ST-505 ETHERNET, WiFi RS
  • Khutlisetsa tšireletso ea mocheso
  • Taolo ea beke le beke le boemo ba leholimo
  • E lumellana le RS le balaoli ba likamore tsa mmuso tse peli

Lisebelisoa tsa taolo: 

  • Pontšo ea LCD
  • CH sensor ea mocheso oa boiler
  • Sensor ea mocheso oa valve
  • Khutlisetsa sensor ea mocheso
  • Sensor sa boemo ba leholimo ba kantle
  • Sekoahelo sa lebota

MOKHOA OA HO KENYA

Molaoli o lokela ho kenngoa ke motho ea tšoanelehang.

  • TLHOKOMELO
    Kotsi ea ho ts'oaroa ke motlakase o bolaeang ka lebaka la ho ama likhokahano tse phelang. Pele o sebetsa ho molaoli, tima phepelo ea motlakase 'me u thibele hore e se ke ea buloa ka phoso.
  • TLHOKOMELO
    Khokelo e fosahetseng ea lithapo e ka senya molaoli!TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (1)

HLOKOMELA

  • Plug RS cable to RS socket e ngotsoeng RS STEROWN e kopanyang EU-i-1 valve module ho molaoli oa sehlooho (CH boiler controller kapa e 'ngoe ea valve module EU-I-1). Sebelisa sokete ena ha feela EU-I-1 e tla sebetsa ka mokhoa o tlase.
  • Hokela lisebelisoa tse laoloang ho sokete e ngotsoeng RS MODUŁY: mohlala, Internet module, GSM module, kapa valve e 'ngoe. Sebelisa sokete ena hafeela EU-I-1 e tla sebetsa ka mokhoa oa master.

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (2)

Exampleano la ho kenya: 

  1. Seqhubu
  2. Pompo ea valve
  3. Sensor ea valve
  4. Khutlisa sensor
  5. Sensor ea boemo ba leholimo
  6. CH sensor ea boiler
  7. Molaoli oa kamore

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (3)

MOKHOA OA HO SEBELISA MOLAOLI

Ho na le likonopo tse 4 tse sebelisoang ho laola sesebelisoa.

  • ETSOA – skrineng se seholo view e sebelisoa ho bula skrine view phanele ea khetho. Ho menu, e sebelisoa ho tsoa ho menu le ho hlakola litlhophiso.
  • NTHO – skrineng se seholo view e sebelisetsoa ho fokotsa mocheso oa valve o behiloeng esale pele. Ka har'a menyu, e sebelisoa ho tsamaea ka har'a likhetho tsa menyetla le ho fokotsa boleng bo hlophisitsoeng.
  • TSOHLE – skrineng se seholo view e sebelisoa ho eketsa mocheso oa valve o behiloeng esale pele. Ho menu, e sebelisoa ho tsamaea ka har'a likhetho tsa menyetla le ho eketsa boleng bo hlophisitsoeng.
  • MENU – e sebedisetswa ho kenya menu le ho netefatsa di-setting.TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (4)

CH TŠEBELE 

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (5)

  1. Boemo ba valve:
    1. TLOA
    2. Tshebetso
    3. CH tšireletso ea boiler - e bontšoa skrineng ha tšireletso ea boiler ea CH e sebetsa; ke hore ha mocheso o eketseha ho ea ho boleng bo hlalositsoeng ho li-setting.
    4. Tšireletso ea ho khutlisa - e hlahisoa skrineng ha ts'ireletso ea ho khutla e kentsoe tšebetsong; ke hore ha mocheso oa ho khutla o le ka tlase ho mocheso oa monyako o hlalositsoeng ho li-setting.
    5. Tekanyetso
    6. Ho chesa fatše
    7. Alamo
    8. Emisa - e hlaha ka mokhoa oa Lehlabula ha Ts'ebetso ea ho koala ka tlase ho monyako e sebetsa - ha mocheso oa CH o le tlase ho feta boleng bo behiloeng esale pele kapa ha mosebetsi oa Room regulator -> Ho koala ho sebetsa - ha mocheso oa kamore o fihlile.
  2. Mokhoa oa ts'ebetso ea taolo
  3. "P" e bontšoa sebakeng sena ha molaoli oa kamore o hokahane le module ea EU-I-1.
  4. Nako ea joale
  5. Ho tloha ka ho le letšehali:
    • Mocheso oa hona joale oa valve
    • Mocheso oa valve o behiloeng esale pele
    • Boemo ba ho bula valve
  6. Letšoao le bontšang hore mojule oa tlatsetso (oa li-valve 1 le 2) o buletsoe.
  7. Letšoao le bontšang boemo ba valve kapa mofuta o khethiloeng oa valve (CH, fatše kapa ho khutla, tšireletso ea ho khutlisa kapa ho pholile).
  8. Letšoao le bonts'ang ts'ebetso ea pompo ea valve
  9. Setšoantšo se bontšang hore mokhoa oa lehlabula o khethiloe
  10. Letšoao le bontšang hore puisano le molaoli ea ka sehloohong e sebetsa

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (6)

PUSELETSO TS'IRELETSO 

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (7)

  1. Boemo ba valve - joalo ka skrineng sa CH
  2. Nako ea joale
  3. CH sensor - mocheso oa hona joale oa CH oa boiler
  4. Boemo ba pompo (e fetola boemo ba eona nakong ea ts'ebetso)
  5. Mocheso oa hona joale oa ho khutla
  6. Peresente ea ho bula valve
  7. CH mocheso oa tšireletso ea boiler - mocheso o phahameng oa CH oa mocheso o behiloeng ho menu ea valve.
  8. Mocheso oa ho kenya pompo kapa o "tima" ha pompo e tima.
  9. Khutlisetsa mocheso oa ts'ireletso - boleng bo behiloeng esale pele

TŠEBELETSO HLALE

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (8)

  1. Boemo ba valve - joalo ka skrineng sa CH
  2. Aterese ea valve
  3. Mocheso oa valve o behiloeng esale pele le phetoho
  4. Mocheso oa hona joale oa valve
  5. Mocheso oa hona joale oa ho khutla
  6. Mocheso oa hona joale oa boiler oa CH
  7. Mocheso oa hona joale oa kantle
  8. Mofuta oa valve
  9. Peresente ea ho bula
  10. Mokhoa oa ts'ebetso ea pompo ea valve
  11. Boemo ba pompo ea valve
  12. Tlhahisoleseding e mabapi le selaodi sa kamore se hoketsweng kapa mokgwa wa ho laola maemo a lehodimo
  13. Tlhahisoleseding e mabapi le puisano e sebetsang le molaodi ya tlase.

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (9)

MESEBETSI EA MOLAOLI - MAIN MENU
Menu e kholo e fana ka likhetho tsa mantlha tsa taolo.

MOHLOMI MOTLO

  • Mocheso oa valve o behiloeng esale pele
  • BONAHALA/TSHA
  • Skrine view
  • Mokhoa oa matsoho
  • Lenane la Fitter
  • Menu ya tshebeletso
  • Litlhophiso tsa skrine
  • Puo
  • Litlhophiso tsa feme
  • Mofuta oa software
  1. Mocheso oa valve o behiloeng esale pele
    Khetho ena e sebelisetsoa ho beha mocheso o lakatsehang oo valve e lokelang ho o boloka. Nakong ea ts'ebetso e nepahetseng, mocheso oa metsi ka tlase ho valve o lekana le mocheso oa valve o behiloeng esale pele.
  2. BONAHALA/TSHA
    Khetho ena e thusa mosebelisi ho kenya valve ea ho kopanya. Ha valve e tima, pompo le eona ha e sebetse. Valve e lula e lekantsoe ha molaoli a hokahantsoe le likhoele le haeba valve e koetsoe. E thibela valve ho lula sebakeng se ka bakang kotsi ho potoloho ea mocheso.
  3. Skrine view
    Khetho ena e sebelisetsoa ho fetola sebopeho sa skrine se seholo ka ho khetha pakeng tsa CH view, mocheso oa li-sensor view, tshireletso ya ho kgutlisa view, kapa ea view e nang le li-parameter tsa valve e le 'ngoe e hahiloeng kapa e eketsehileng (feela ha li-valve li sebetsa). Ha mocheso oa sensor view e khethiloe, skrine e bonts'a mocheso oa valve (boleng ba hona joale), mocheso oa hona joale oa CH, mocheso oa hona joale oa ho khutla, le mocheso o ka ntle. Ka valve ea 1 le ea 2 view skrine e bonts'a liparamente tsa valve e khethiloeng: mocheso oa hona joale le o behiloeng esale pele, mocheso o kantle, mocheso oa ho khutla, le liperesente tsa ho buloa ha valve.
  4. Mokhoa oa matsoho
    Khetho ena e sebelisetsoa ho bula / koala valve ka letsoho (le li-valve tse eketsehileng haeba li sebetsa) hammoho le ho bulela pompo / tima ho hlahloba hore na lisebelisoa li sebetsa hantle.
  5. Lenane la Fitter
    Mesebetsi e fumanehang ho menu ea Fitter e lokela ho hlophisoa ke li-fitters tse tšoanelehang le ho ameha ka maemo a tsoetseng pele a molaoli.
  6. Menu ya tshebeletso
    Mesebetsi e fumanehang ka har'a menu e nyenyane ena e lokela ho finyelloa feela ke basebeletsi ba litšebeletso le batho ba tšoanelehang. Ho fihlella lethathamong lena ho sirelelitsoe ka khoutu e fanoeng ke Tech.

Litlhophiso tsa skrine

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (10)

Litlhophiso tsa skrini li ka etsoa ka mokhoa o ikhethileng ho khotsofatsa litlhoko tsa mosebelisi.

  • Bapisa
    Ts'ebetso ena e thusa mosebelisi ho fetola phapang ea ponts'o.
  • Nako ea ho koala skrineng
    Ts'ebetso ena e thusa mosebelisi ho beha nako ea ho koala skrineng (khanya ea skrineng e fokotsehile ho isa boemong bo hlalositsoeng ke mosebelisi - paramethara ea khanya ea skrine e se nang letho).
  • Khanya ea skrine
    Ts'ebetso ena e thusa mosebelisi ho fetola khanya ea skrine nakong ea ts'ebetso e tloaelehileng mohlala viewho khetha, ho fetola li-setting, joalo-joalo.
  • Khanya ea skrine e se nang letho
    Ts'ebetso ena e thusa mosebelisi ho fetola khanya ea skrine e se nang letho e kentsoeng tšebetsong ka bo eona kamora nako e boletsoeng esale pele ea ho se sebetse.
  • Ho boloka matla
    Hang ha khetho ena e se e kentsoe, khanya ea skrine e tla fokotseha ka 20%.
  • Puo
    Khetho ena e sebelisoa ho khetha mofuta oa puo oa lenane la taolo.
  • Litlhophiso tsa feme
    Molaoli o lokiselitsoe esale pele bakeng sa ts'ebetso. Leha ho le joalo, litlhophiso li tlameha ho etsoa ho latela litlhoko tsa mosebelisi. Ho khutlela ho litlhophiso tsa feme hoa khoneha ka nako efe kapa efe. Hang ha khetho ea litlhophiso tsa fektheri e kentsoe, litlhophiso tsohle tsa boiler tsa CH li lahlehile 'me li nkeloa sebaka ke litlhophiso tsa moetsi. Joale, li-parameter tsa valve li ka fetoloa bocha.
  • Mofuta oa software
    Khetho ena e sebelisetsoa ho view nomoro ea phetolelo ea software - tlhahisoleseding e hlokahalang ha u kopana le basebeletsi ba tšebeletso.

MOSEBETSI OA MOLAOLI– MENU YA FITTER
Likhetho tsa menyetla ea Fitter li lokela ho hlophisoa ke basebelisi ba tšoanelehang. Li ama likarolo tse tsoetseng pele tsa ts'ebetso ea molaoli.

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (11)

Mokhoa oa lehlabula
Ka mokhoa ona, molaoli o koala valve ea CH e le hore a se ke a futhumatsa ntlo ho sa hlokahale. Haeba mocheso oa boiler oa CH o phahame haholo (ts'ireletso ea ho khutla e tlameha ho sebetsa!) Sephahla se buloa ka mokhoa oa tšohanyetso. Mokhoa ona ha o sebetse tabeng ea ho laola valve ea fatše le ka mokhoa oa tšireletso oa Return.

Mokhoa oa lehlabula ha o ame ts'ebetso ea valve ea ho pholisa.

Molaoli oa TECH
Hoa khoneha ho hokahanya molaoli oa kamore le puisano ea RS ho molaoli oa EU-I-1. Khetho ena e lumella mosebelisi ho hlophisa molaoli ka ho khetha khetho ea ON.

HLOKOMELA
E le hore molaoli oa EU-I-1 a sebelisane le molaoli oa kamore le puisano ea RS, hoa hlokahala ho beha mokhoa oa puisano ho ea ka sehloohong. Khetho e nepahetseng e boetse e lokela ho khethoa ka har'a submenu ea Room Regulator.

Litlhophiso tsa li-valve
Submenu ena e arotsoe ka likarolo tse peli tse tsamaellanang le li-valve tse itseng - valve e hahelletsoeng le li-valve tse peli tse eketsehileng. Li-parameter tse ling tsa li-valve li ka fumanoa feela ka mor'a hore li-valve li ngolisoe.

Valofo e hahiloeng

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (12) TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (13)

  • bakeng sa valve e hahiloeng feela
  • bakeng sa li-valve tse eketsehileng feela

Ngodiso
Tabeng ea ho sebelisa li-valve tse eketsehileng, ho hlokahala hore u ngolise valve ka ho kenya nomoro ea eona ea mojule pele litlhophiso tsa eona li ka lokisoa.

  • Haeba module ea valve ea EU-I-1 RS e sebelisoa, e tlameha ho ngolisoa. Khoutu ea ngoliso e ka fumanoa sekoahelong se ka morao kapa ho submenu ea mofuta oa software ( valve ea EU-I-1: MENU -> Mofuta oa software).
  • Litlhophiso tse setseng tsa li-valve li ka fumanoa ho menu ea Tšebeletso. Taolo ea EU-I-1 e lokela ho beoa e le ea ka tlase mme mosebelisi o lokela ho khetha li-sensor ho latela litlhoko tsa motho ka mong.

Ho tlosoa ha valve

HLOKOMELA
Khetho ena e fumaneha feela bakeng sa valve e eketsehileng (mojule ea kantle). Khetho ena e sebelisetsoa ho tlosa valve ho tloha mohopolong oa molaoli. Ho tlosoa ha li-valve ho sebelisoa mohlala, ha ho haroloa valve kapa ho fetola mochine (ho hlokahala hore ho ngolisoe mochine o mocha).

  • Phetolelo
    Khetho ena e sebelisetsoa ho lekola mofuta oa software o sebelisitsoeng mojuleng o tlase.
  • BONAHALA/TSHA
    Hore valve e sebetse, khetha HO BUA. Ho tima vale ka nakwana, kgetha TIMA.
  • Mocheso oa valve o behiloeng esale pele
    Khetho ena e sebelisetsoa ho beha mocheso o lakatsehang oo valve e lokelang ho o boloka. Nakong ea ts'ebetso e nepahetseng, mocheso oa metsi ka tlase ho valve o lekana le mocheso oa valve o behiloeng esale pele.
  • Tekanyetso
    Ts'ebetso ena e thusa mosebelisi ho lekanya valve e hahelletsoeng ka nako efe kapa efe. Nakong ea ts'ebetso ena valve e khutlisetsoa sebakeng sa eona se sireletsehileng - tabeng ea CH valve e butsoe ka ho feletseng athe tabeng ea valve ea fatše, e koetsoe.
  • Leqeba le le leng
    Ena ke sekhahla se phahameng se le seng (ho bula kapa ho koala) seo valve e ka se etsang nakong ea mocheso o le mongampling. Haeba mocheso o haufi le boleng bo behiloeng esale pele, stroke e baloa ho latela boleng ba paramethara ea coefficient. Ha stroke e le 'ngoe e nyane, mocheso o behiloeng o ka finyelloa ka nepo haholoanyane. Leha ho le joalo, ho nka nako e telele hore mocheso o behiloeng o fihlelle.
  • Ho bula bonyane
    Paramethara e etsa qeto ea ho bula valve e nyane ka ho fetisisa. Ka lebaka la parameter ena, valve e ka buloa hanyenyane, ho boloka phallo e nyenyane ka ho fetisisa.
  • Nako ea ho bula
    Paramethara ena e hlalosa nako e hlokahalang hore valve e bulehe ho tloha ho 0% ho ea ho 100% boemo. Boleng bona bo lokela ho beoa tlasa lintlha tse fanoeng ho poleiti ea litekanyetso tsa actuator.
  • Ho kgefutsa ho lekanya
    Parameter ena e etsa qeto ea makhetlo a mangata a tekanyo ea mocheso oa metsi (taolo) ka mor'a valve ea CH. Haeba sensor e bontša phetoho ea mocheso (ho kheloha ho tloha boleng bo behiloeng esale pele), valve ea motlakase e tla bula kapa e koalehe ka sekhahla se behiloeng esale pele, ho khutlela mocheso o behiloeng pele.
  • Hysteresis ea valve
    Khetho ena e sebelisetsoa ho beha hysteresis ea mocheso oa valve o behiloeng esale pele. Ke phapang pakeng tsa mocheso o behiloeng esale pele (o lakatsehang) le mocheso oo valve e tla qala ho koala kapa ho bula.

ExampLe:

Mocheso oa valve o behiloeng esale pele 50°C
Hysteresis 2°C
Valofo e emisa ho 50°C
Ho koaloa ha valve 52°C
Ho buloa ha valve 48°C
  • Ha mocheso o behiloeng esale pele ke 50 ° C 'me boleng ba hysteresis ke 2 ° C, valve e emisa sebakeng se le seng ha mocheso oa 50 ° C o fihla. Ha mocheso o theohela ho 48 ° C, valve e qala ho buleha.
  • Ha mocheso oa 52 ° C o fihla, valve e qala ho koala ho fokotsa mocheso.

Mofuta oa valve

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (14)

Ka khetho ena, mosebelisi o khetha mofuta oa valve o lokelang ho laoloa:

  • CH - khetha haeba u batla ho laola mocheso oa potoloho ea CH u sebelisa sensor ea valve. Sensor ea li-valve e lokela ho kenngoa ka tlaase ho valve ea ho kopanya holim'a phala ea phepelo.
  • LEBAKA - khetha haeba u batla ho laola mocheso oa potoloho ea mocheso o ka tlaase. E sireletsa tsamaiso e futhumatsang fatše khahlanong le mocheso o kotsi. Haeba mosebeletsi a khetha CH e le mofuta oa valve 'me a e kopanya le tsamaiso ea ho futhumatsa ka tlas'a lefatše, ho kenngoa ha fatše ho ka senyeha.
  • PUSELETSO TS'IRELETSO - khetha haeba u batla ho laola mocheso oa ho khutla u sebelisa sensor ea ho khutla. Ha mofuta ona oa valve o khethoa, ho khutla feela 'me CH boiler sensors e sebetsa ha valve sensor e sa lokela ho kopanngoa le molaoli. Ka mokhoa ona, ntho ea bohlokoa ka ho fetisisa ke ho sireletsa CH boilers ho khutlela ho mocheso o tlase. Ha khetho ea tšireletso ea CH e khethoa hape, valve e boetse e sireletsa CH boiler khahlanong le ho chesa haholo. Ha valve e koetsoe (0% e bula), metsi a phalla feela ka potoloho e khutšoanyane athe ha valve e bulehile (100% e bulehile), potoloho e khutšoanyane e koetsoe 'me metsi a phalla ka mokhoa oa ho futhumatsa.
    • TLHOKOMELO
      Ha tšireletso ea boiler ea CH e sebetsa, mocheso oa CH ha o susumetse ho bula ha valve. Maemong a feteletseng, sena se ka etsa hore CH boilers overheating. Ka hona, ho eletsoa ho lokisa litlhophiso tsa tšireletso ea boiler ea CH.
  • TSIETSO - khetha haeba u batla ho laola mocheso oa mocheso oa mocheso (valve e bula ha mocheso o behiloeng esale pele o le tlase ho feta mocheso oa sensor ea valve). Mofuteng ona oa li-valve mesebetsi e latelang ha e fumanehe: CH tšireletso ea boiler, tšireletso ea ho khutlisa. Mofuta ona oa valve o sebetsa ho sa tsotelehe mokhoa o sebetsang oa lehlabula mme ts'ebetso ea pompo e thehiloe moeling oa ho koala. Ho phaella moo, mofuta ona oa valve o na le lekhalo le fapaneng la ho futhumatsa bakeng sa ts'ebetso ea ho laola maemo a leholimo.

Ho bula ka CH calibration
Ha ts'ebetso ena e se e kentsoe, tlhahlobo ea li-valve e qala ho tloha mohatong oa ho bula. Khetho ena e fumaneha feela haeba mofuta oa valve oa CH o khethiloe.

Ho futhumatsa fatše - lehlabula
Mosebetsi o sebetsa ha o khetha mofuta oa valve e le valve ea fatše Ho kenya ts'ebetso ena ho tla etsa hore valve ea fatše e sebetse ka mokhoa oa lehlabula.

Taolo e thehiloeng ho boemo ba leholimo

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (15)

Mokokotlo o futhumatsang

  • Mocheso oa ho futhumatsa - lekhalo ho latela hore na mocheso oa molaoli o behiloeng esale pele o khethoa, o itšetlehile ka mocheso o ka ntle. Ho molaoli oa rona, lekhalo lena le hahiloe ho latela lithempereichara tse 'nè tse behiloeng esale pele (ka tlaase ho valve) bakeng sa litekanyetso tse fapaneng tsa mocheso o ka ntle -20 ° C, -10 ° C, 0 ° C, le 10 ° C.
  • Mokokotlo o fapaneng oa ho futhumatsa o sebetsa ho mokhoa oa Cooling. E behiloe bakeng sa mocheso o latelang oa kantle: 10 °C, 20° C, 30° C, 40° C.TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (16)

Molaoli oa kamore

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (17)

Submenu ena e sebelisetsoa ho lokisa liparamente tsa taolo ea kamore e leng ho laola valve.

Mosebetsi oa ho laola kamore ha o fumanehe ka mokhoa oa ho pholile.

  • Taolo ntle le taolo ea kamore
    Ha khetho ena e khethoa, molaoli oa kamore ha a susumetse ts'ebetso ea valve.
  • Molaoli oa TECH
    Valve e laoloa ke molaoli oa kamore e nang le puisano ea RS. Ha mosebetsi ona o khethiloe, molaoli o sebetsa ho ea ka Room reg. temp. parameter e tlase.
  • TECH proportional regulator
    Mofuta ona oa taolo o lumella mosebelisi ho view mocheso oa hajoale oa boiler ea CH, tanka ea metsi le li-valve. E lokela ho hokahana le sokete ea RS ea molaoli. Ha mofuta ona oa taolo ea kamore o khethoa, valve e laoloa ho ea ka Phetoho ka nako e behiloeng. le Phapang ea mocheso oa kamore.
  • Standard valve regulator
    Ha khetho ena e khethoa, valve e laoloa ke molaoli o tloaelehileng oa linaha tse peli (ntle le puisano ea RS). Mookameli o sebetsa ho ea ka Room reg. temp. parameter e tlase.

Likhetho tsa taolo ea kamore

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (18)

  • Reg ea kamore. temp. tlase

HLOKOMELA
Paramethara ena e amana le molaoli oa Standard valve le molaoli oa TECH.

Mosebelisi o hlalosa boleng ba mocheso oo mocheso oa valve o behiloeng esale pele o tla fokotsoa ha mocheso oa taolo ea kamore e behiloeng esale pele o fihleloa.

  • Phapang ea mocheso oa kamore

HLOKOMELA
Paramethara ena e amana le tšebetso ea TECH proportional regulator.

Tlhophiso ena e sebelisetsoa ho hlalosa phetoho e le 'ngoe ea mocheso oa kamore ea hona joale (ka ho nepahala ha 0.1 ° C) moo phetoho e hlalositsoeng pele ho mocheso o behiloeng pele oa valve e hlahisoa.

  • Fetola mocheso o behiloeng.

HLOKOMELA
Paramethara ena e amana le tšebetso ea TECH proportional regulator.

Tlhophiso ena e etsa qeto ea hore na mocheso oa valve o lokela ho eketsa kapa ho fokotseha ka likhato tse kae ka mocheso o le mong oa mocheso oa kamore (bona: Phapang ea mocheso oa kamore) Ts'ebetso ena e sebetsa feela le TECH room regulator mme e amana haufi-ufi le phapang ea mocheso oa Kamore. paramethara.

ExampLe:

Litlhophiso:
Phapang ea mocheso oa kamore 0,5°C
Fetola mocheso o behiloeng. 1°C
Mocheso oa valve o behiloeng esale pele 40°C
Mocheso o behiloeng esale pele oa taolo ea kamore 23°C
  • Taba ea 1:
    Haeba mocheso oa kamore o nyolohela ho 23,5ºC (0,5ºC ka holim'a mocheso oa kamore e behiloeng esale pele), valve e koala ho fihlela 39ºC e fihletsoe (ho fetoha ha 1ºC).
  • Taba ea 2:
    Haeba mocheso oa kamore o theohela ho 22ºC (1ºC ka tlase ho mocheso oa kamore e behiloeng esale pele), belofo e bula ho fihlela 42ºC e fihletsoe (2ºC phetoho - hobane bakeng sa phapang e 'ngoe le e 'ngoe ea 0,5 ° C ea mocheso oa kamore, mocheso oa valve o behiloeng esale pele o fetoha ka 1°C).
    • Mosebetsi oa ho laola kamore

Mosebetsi ona o sebelisetsoa ho etsa qeto ea hore na valve e lokela ho koala kapa mocheso o fokotsehe ha mocheso o behiloeng esale pele o fihlile.

Proportionality coefficient
Proportionality coefficient e sebelisetsoa ho hlalosa setorouku sa valve. Ha e le haufi le mocheso o behiloeng esale pele, stroke e nyane. Haeba boleng ba coefficient bo phahame, valve e nka nako e fokolang ho bula empa ka nako e ts'oanang tekanyo ea ho bula ha e nepahale hantle. Foromo e latelang e sebelisoa ho bala peresente ea ho bula ha 'ngoe:

?????? ?? ? ?????? ??????= (??? ?????????−?????? ?????????)∙

  • ??????????????? ????????????/10

Tataiso ea ho bula

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (19)

Haeba, ka mor'a ho hokahanya valve ho molaoli, ho bonahala eka e hokahane ka tsela e 'ngoe, joale lisebelisoa tsa motlakase ha lia lokela ho fetoloa. Ho e-na le hoo, ho lekane ho fetola tataiso ea ho bula paramenteng ena: LEFT kapa HO LETSA.

Boholo ba mocheso oa fatše

HLOKOMELA
Khetho ena e fumaneha feela ha mofuta oa valve o khethiloeng ke valve ea fatše.

Mosebetsi ona o sebelisetsoa ho hlalosa mocheso o phahameng oa sensor ea valve (haeba valve ea fatše e khethiloe). Hang ha mocheso ona o fihlile, valve e koetsoe, pompo e holofetse 'me skrine e kholo ea molaoli e tsebisa ka ho futhumala ha fatše.

Khetho ea sensor
Khetho ena e ama sensor ea ho khutla le sensor ea kantle. E sebelisetsoa ho khetha hore na taolo e eketsehileng ea ts'ebetso ea li-valve e lokela ho thehoa holim'a lipalo tse tsoang ho li-sensor tsa module ea valve kapa li-sensors tse ka sehloohong tsa taolo.

CH sensor
Khetho ena e ama sensor ea CH. E sebelisetsoa ho khetha hore na ts'ebetso e eketsehileng ea li-valve e lokela ho thehoa holim'a lipalo tse tsoang ho li-sensor tsa module ea valve kapa li-controller tse ka sehloohong.

CH tšireletso ea boiler

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (20)

Tšireletso khahlanong le mocheso o phahameng haholo oa ho khutla o sebeletsa ho thibela kholo e kotsi ho mocheso oa boiler oa CH. Mosebelisi o beha mocheso o phahameng o amohelehang oa ho khutlisa. Haeba ho na le kholo e kotsi ea mocheso, valve e qala ho bula sistimi ea ho futhumatsa ntlo ho pholisa boiler ea CH fatše.

Ts'ebetso ea ts'ireletso ea boiler ea CH ha e fumanehe ka mofuta oa li-valve tse pholileng.

Boholo ba mocheso
Mosebelisi o hlalosa mocheso o amohelehang oa CH oo valve e tla bula.

Tšireletso ea ho khutlisa

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (21)

Ts'ebetso ena e lumella ho theha tšireletso ea boiler ea CH khahlanong le metsi a pholileng haholo a khutlang ho tsoa potolohong e kholo, e ka bakang kutu e tlase ea mocheso o tlase. Tšireletso ea ho khutla e kenyelletsa ho koala valve ha mocheso o le tlase haholo ho fihlela potoloho e khutšoanyane ea boiler e fihla mocheso o loketseng.

Ts'ebetso ea ts'ireletso ea ho khutla ha e fumanehe ka mofuta oa li-valve tse pholileng.

Mocheso o fokolang oa ho khutla
Mosebelisi o hlalosa bonyane mocheso o amohelehang oa ho khutla oo valve e tla koala.

Pompo ea valve

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (22)

Mekhoa ea ts'ebetso ea pompo

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (23)

Khetho ena e sebelisetsoa ho khetha mokhoa oa ho sebetsa pompo.

  • Kamehla-ON - pompo e sebetsa ka linako tsohle, ho sa tsotellehe mocheso.
  • Kamehla E TLOHILE - pompo e koetsoe ka ho sa feleng 'me molaoli o laola ts'ebetso ea valve feela
  • ON ka holimo ho monyako - pompo e kenngoa ka holim'a mocheso oa ho qala o behiloeng esale pele. Haeba pompo e tla kengoa ka holim'a monyako, mosebelisi o lokela ho hlalosa mocheso oa monyako oa ts'ebetso ea pompo. Mocheso o baloa ho tloha ho CH sensor.
  • Deactivation threshold* - pompo e nolofalitsoe ka tlase ho mocheso oa ho koala o behiloeng esale pele o lekantsoeng
    CH sensor. Ka holim'a boleng bo behiloeng esale pele pompo e koetsoe.
    • The deactivation threshold function e fumaneha ka mor'a ho khetha Cooling e le mofuta oa valve.

Phetoho ea pompo ka mocheso
Khetho ena e ama pompo e sebetsang ka holimo ho moeli (bona: ka holimo). Pompo ea valve e fetoloa ha boiler ea CH e fihla mocheso oa ho kenya pompo.

Pompo e thibelang ho emisa
Ha ts'ebetso ena e sebetsa, pompo ea valve e sebelisoa matsatsi a mang le a mang a 10 bakeng sa metsotso e 2. E thibela stagmetsi a nang le metsi a futhumatsang ka ntle ho nako ea ho futhumatsa.

Ho koala mocheso o tlase. monyako
Hang ha ts'ebetso ena e sebelisoa (ka ho khetha ON), valve e lula e koetsoe ho fihlela mochine oa CH boiler o fihla mocheso oa pompo.

HLOKOMELA
Haeba EU-I-1 e sebelisoa e le module ea tlatsetso ea valve, pompa anti-stop le ho koala ka tlase ho mocheso. threshold e ka hlophisoa ka kotloloho ho tsoa ho menu ea subordinate.

  • Molaoli oa kamore ea pompo ea li-valve
    Ha khetho ena e sebetsa, molaoli oa kamore o tima pompo ha mocheso o behiloeng esale pele o fihlile.
  • Pompo feela
    Ha khetho ena e sebetsa, molaoli o laola pompo feela ha valve e sa laoloe.
  • Ts'ebetso - 0%
    Hang ha mosebetsi ona o se o entsoe, pompo ea valve e tla sebetsa le haeba valve e koetsoe ka ho feletseng (ho bula valve = 0%).
  • Tekanyetso ea kutlo ea kantle
    External sensor calibration e etsoa ha e ntse e phahama kapa ka mor'a hore molaoli a sebelisoe nako e telele haeba mocheso o ka ntle o bontšitsoeng o fapane le mocheso oa sebele. Sebaka sa ho lekanya se tloha ho -10⁰C ho isa +10⁰C.

Ho koala

HLOKOMELA

  • Mosebetsi o fumaneha ka mor'a ho kenya khoutu.
  • Parameter ena e sebelisetsoa ho etsa qeto ea hore na valve e lokela ho koala kapa e bulehe hang ha e tima ka mokhoa oa CH. Khetha khetho ena ho koala valve. Haeba mosebetsi ona o sa khethoa, valve e tla buleha.

Taolo ea beke le beke ea valve

  • Ts'ebetso ena e nolofalletsa mosebelisi ho hlophisa liphetoho tsa letsatsi le letsatsi tsa mocheso oa li-valve tse behiloeng esale pele bakeng sa nako le letsatsi le itseng la beke. Litlhophiso tsa ho fetoha ha mocheso ke +/-10˚C.
  • Ho kenya ts'ebetsong taolo ea beke le beke, khetha mokhoa oa 1 kapa mokhoa oa 2. Litlhophiso tse qaqileng tsa mokhoa o mong le o mong li fanoe likarolong tse latelang: Seta mode 1 le Seta mode 2. (litlhophiso tse fapaneng tsa letsatsi le leng le le leng la beke) le mokhoa oa 2 (litlhophiso tse arohaneng tsa ho sebetsa. matsatsi le mafelo a beke).
  • ELA HLOKO Hore ts'ebetso ena e sebetse hantle, hoa hlokahala ho beha letsatsi le nako ea hajoale.

MOKHOA OA HO HLOMELA TAOLI EA BEKE
Ho na le mekhoa e 2 ea ho beha taolo ea beke le beke:

MOKHOA 1 - mosebelisi o beha likhaello tsa mocheso bakeng sa letsatsi le leng le le leng la beke ka thoko

Mokhoa oa ho lokisa 1:

  • Khetha: Seta mokhoa 1
  • Khetha letsatsi la beke leo u tla lokisoa ka lona
  • Skrine se latelang se hlaha skrineng:TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (24)
  • Sebelisa likonopo tsa <+> <-> ho khetha hora eo o tla e hlophisa ebe o tobetsa MENU ho netefatsa.
  • Khetha CHANGA ho tsoa likhethong tse hlahang tlase skrineng ka ho tobetsa MENU ha khetho ena e totobalitsoe ka bosoeu.
  • Eketsa kapa fokotsa mocheso kamoo ho hlokahalang 'me u netefatse.
  • Mokhahlelo oa phetoho ea mocheso o behiloeng esale pele ke -10°C ho isa ho 10°C.
  • Haeba u batla ho kopitsa boleng ba phetoho ea mocheso lihoreng tse latelang, tobetsa konopo ea MENU ha ho khethoa tlhophiso. Ha likhetho li hlaha ka tlase skrineng, khetha COPY 'me u sebelise likonopo tsa <+> <-> ho kopitsa litlhophiso hora e fetileng kapa e latelang. Tobetsa MENU ho netefatsa.

ExampLe:

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (25)

Haeba mocheso oa CH o behiloeng esale pele o le 50 ° C, ka Mantaha pakeng tsa 400 le 700 mocheso oa CH o tla eketseha ka 5 ° C ho fihlela 55 ° C; pakeng tsa 700 le 1400 e tla theoha ka 10 ° C, ho fihlela 40 ° C, 'me pakeng tsa 1700 le 2200 e tla eketseha ho fihla ho 57 ° C. Haeba mocheso oa CH o behiloeng esale pele o le 50 ° C, ka Mantaha pakeng tsa 400 le 700 mocheso oa CH o tla eketseha ka 5 ° C ho fihlela 55 ° C; pakeng tsa 700 le 1400 e tla theoha ka 10 ° C, ho fihlela 40 ° C, 'me pakeng tsa 1700 le 2200 e tla eketseha ho fihla ho 57 ° C.

MOKHOA 2 - mosebelisi o beha likhaello tsa mocheso bakeng sa matsatsi ohle a ho sebetsa (Mantaha-Labohlano) le mafelo-beke (Moqebelo-Sontaha) ka thoko.

Mokhoa oa ho lokisa 2:

  • Kgetha Seta mokgwa 2.
  • Khetha karolo ea beke e tla fetoloa.
  • Latela mokhoa o ts'oanang le oa Mode 1.

ExampLe:

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (26)

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (27)

Haeba mocheso oa boiler oa CH o behiloeng esale pele ke 50 ° C, ho tloha ka Mantaha ho fihlela Labohlano pakeng tsa 400 le 700 mocheso oa CH o tla eketseha ka 5 ° C ho fihlela 55 ° C; pakeng tsa 700 le 1400 e tla theoha ka 10 ° C, ho fihlela 40 ° C, 'me pakeng tsa 1700 le 2200 e tla eketseha ho fihla ho 57 ° C. Mafelong a beke, mocheso o pakeng tsa 600 le 900 o tla nyoloha ka 5 ° C ho fihlela 55 ° C, 'me pakeng tsa 1700 le 2200 o tla eketseha ho fihla ho 57 ° C.

Litlhophiso tsa feme
Ts'ebetso ena e nolofalletsa mosebelisi ho khutlisetsa litlhophiso tsa fektheri bakeng sa valve e itseng. Ho tsosolosa maemo a fektheri ho fetola mofuta oa valve o khethiloeng ho CH valve.

Litlhophiso tsa nako
Paramethara ena e sebelisoa ho beha nako ea hajoale.

  • Sebelisa <+> le <-> ho beha hora le metsotso ka thoko.TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (28)

Litlhophiso tsa letsatsi
Paramethara ena e sebelisoa ho beha letsatsi la hajoale.

  • Sebelisa <+> le <-> ho beha letsatsi, khoeli le selemo ka thoko.TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (29)

Setšoantšo sa GSM

HLOKOMELA
Taolo ea mofuta ona e fumaneha feela ka mor'a ho reka le ho hokahanya module e eketsehileng ea taolo ea ST-65 e sa kenyelletsoeng ho sete ea taolo e tloaelehileng.

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (30)

  • Haeba molaoli o na le mojule oa tlatsetso oa GSM, hoa hlokahala ho o kenya tšebetsong ka ho khetha ON.

GSM Module ke sesebelisoa sa boikhethelo seo, ho sebelisana le molaoli, se nolofalletsang mosebelisi ho laola ts'ebetso ea boiler ea CH ka selefouno. Mosebelisi o romelloa SMS nako le nako ha alamo e hlaha. Ho feta moo, kamora ho romella molaetsa o itseng oa mongolo, mosebelisi o fumana maikutlo mabapi le mocheso oa hajoale oa li-sensor tsohle. Phetoho e hole ea mocheso o behiloeng esale pele e ka khoneha hape ka mor'a ho kenya khoutu ea tumello. GSM Module e ka sebetsa ntle le selaoli sa boiler sa CH. E na le lisebelisoa tse peli tse eketsehileng tse nang le li-sensors tsa mocheso, e le 'ngoe ea ho ikopanya e lokelang ho sebelisoa tlhophisong leha e le efe (ho lemoha ho koaloa / ho buloa ha mabitso), le tlhahiso e le' ngoe e laoloang (mohlala, monyetla oa ho hokela konteraka e eketsehileng ho laola potoloho efe kapa efe ea motlakase)

Ha li-sensor tsa mocheso li fihla ho mocheso o behiloeng esale pele kapa bonyane ba mocheso, mojule o romella molaetsa oa SMS o nang le tlhaiso-leseling e joalo. Mokhoa o tšoanang o sebelisoa tabeng ea ho bula kapa ho koala ho kenya letsoho, e ka sebelisoang e le mokhoa o bonolo oa ho sireletsa thepa.

Internet module

HLOKOMELA
Taolo ea mofuta ona e fumaneha feela ka mor'a ho reka le ho hokahanya module e eketsehileng ea taolo ea ST-505 e sa kenyelletsoeng ho sete ea taolo e tloaelehileng.

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (31)

  • Pele o ngolisa mojule, hoa hlokahala ho theha ak'haonte ea mosebelisi ho emodul.pl (haeba u sena eona).TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (32)
  • Hang ha mojule o se o hokahantsoe hantle, khetha Mojule ON.
  • E latelang, khetha Ngoliso. Molaoli o tla hlahisa khoutu.
  • Kena ho emodul.pl, e ea ho li-setting ebe u kenya khoutu e hlahang skrineng sa taolo.
  • Hoa khoneha ho fana ka lebitso kapa tlhaloso leha e le efe ho module hammoho le ho fana ka nomoro ea mohala le aterese ea e-mail eo litsebiso li tla romelloa ho eona.
  • Hang ha e entsoe, khoutu e lokela ho kenngoa ka hare ho hora. Ho seng joalo, e tla fetoha e sa sebetseng 'me ho tla hlokahala ho hlahisa e ncha.TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (33)
  • Liparamente tsa mojule oa Marang-rang joalo ka aterese ea IP, mask a IP, aterese ea heke, joalo-joalo. mohlomong e behiloe ka letsoho kapa ka ho khetha khetho ea DHCP.
  • Mojule oa Marang-rang ke sesebelisoa se nolofalletsang mosebelisi taolo ea hole ea boiler ea CH ka Marang-rang. Emodul.pl e thusa mosebelisi ho laola boemo ba lisebelisoa tsohle tsa CH boilers system le lisensara tsa mocheso skrineng sa lapeng sa komporo, tablet kapa smartphone. Ho tlanya litšoantšong tse tsamaellanang, mosebelisi a ka fetola liparamente tsa ts'ebetso, mocheso o behiloeng esale pele bakeng sa lipompo le li-valve, jj.TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (34)

Mokhoa oa puisano

  • Mosebelisi a ka khetha pakeng tsa mokhoa o ka sehloohong oa puisano (o ikemetseng) kapa mokhoa o ka tlase (ka tšebelisano le molaoli ea hloahloa ho boiler ea CH kapa module e 'ngoe ea valve ST-431N).
  • Ka mokhoa o ka tlase oa puisano, molaoli oa li-valve o sebetsa e le module mme litlhophiso tsa eona li lokisoa ka CH boiler controller. Likhetho tse latelang ha li fumanehe: ho hokahanya molaoli oa kamore le puisano ea RS (mohlala, ST-280, ST-298), ho hokahanya mochine oa Inthanete (ST-65), kapa mochine o eketsehileng oa valve (ST-61).

Tekanyetso ea kutlo ea kantle
External sensor calibration e etsoa ha e ntse e phahama kapa ka mor'a hore e sebelisoe nako e telele haeba mocheso o ka ntle o bontšitsoeng o fapane le mocheso oa sebele. Sebaka sa ho lekanya se tloha ho -10⁰C ho isa +10⁰C. Paramethara ea nako e tloaelehileng e hlalosa makhetlo ao li-sensor tsa ka ntle li baloang li rometsoeng ho molaoli.

Ntlafatso ea software
Ts'ebetso ena e sebelisetsoa ho nchafatsa/ho fetola mofuta oa software o kentsoeng ho molaoli.

HLOKOMELA
Ho eletsoa hore ho be le lintlafatso tsa software tse etsoang ke motho ea tšoanelehang. Hang ha phetoho e se e hlahisitsoe, ho ke ke ha khoneha ho tsosolosa litlhophiso tse fetileng.

  • Memory stick e tlang ho sebelisoa ho boloka setup file e lokela ho ba le letho (haholo-holo e hlophisitsoeng).
  • Etsa bonnete ba hore file e bolokilweng ho memory stick e na le lebitso le tshwanang le le jarollotsweng file e le hore e se ke ea ngoloa.

Mokhoa oa Bobeli:

  • Kenya memory stick ka software ka har'a taolo ea USB port.
  • Khetha Apdeite ea Software (ho menu ea fitter).
  • Netefatsa ho qala bocha
    • Apdeite ea software e qala ka bo eona.
    • Molaoli o qala hape
    • Ha e se e qalile bocha, ponts'o ea molaoli e bonts'a skrine ea ho qala ka mofuta oa software
    • Hang ha ts'ebetso ea ho kenya e phethiloe, pontšo e bonts'a skrine ea sehlooho.
  • Ha apdeite ea software e phethiloe, tlosa memory stick boema-kepeng ba USB.

Mokhoa oa Bobeli:

  • Kenya memory stick ka software ka har'a taolo ea USB port.
  • Seta sesebelisoa bocha ka ho se hulela le ho se hokela hape.
  • Ha molaoli a qala hape, ema ho fihlela ts'ebetso ea ntlafatso ea software e qala.
    • Karolo e latelang ea ntlafatso ea software e tšoana le ea Mode 1.

Litlhophiso tsa feme
Khetho ena e sebelisetsoa ho khutlisa litlhophiso tsa fektheri tsa menu ea fitter.

TS'IRELETSO LE TSOSO

Ho netefatsa ts'ebetso e bolokehileng le e se nang ho hloleha, molaoli o na le lisebelisoa tse ngata tsa ts'ireletso. Haeba ho na le alamo, letshwao la modumo le a kenngwa tshebetsong mme molaetsa o nepahetseng o hlaha skrineng.

TLHALOSO
E emisa taolo ea mocheso oa li-valve ebe e beha valve sebakeng sa eona se sireletsehileng (valafo ea fatše - e koetsoe; CH valve-open).
Ha ho na sensor e hokahaneng / e hokahaneng ka mokhoa o sa nepahalang oa tšenyo ea sensor / sensor. Sensor e bohlokoa bakeng sa ts'ebetso e nepahetseng ea valve kahoo e hloka ho nkeloa sebaka hang-hang.
Alamo ena e etsahala ha ts'ebetso ea ts'ireletso ea ho khutla e sebetsa 'me sensor e senyehile. Sheba ho hlongoa ha sensor kapa u e khutlisetse haeba e senyehile.

Hoa khoneha ho tima alamo ka ho thibela ts'ebetso ea ts'ireletso ea ho khutla
Alamo ena e etsahala ha sensor ea mocheso e ka ntle e senyehile. Alamo e kanna ea koaloa ha sensor e sa senyehang e kentsoe hantle. Alamo ha e hlahe ka mekhoa e meng ea ts'ebetso ntle le 'taolo ea maemo a leholimo' kapa 'Taolo ea kamore e nang le taolo e thehiloeng ho boemo ba leholimo'.
Alamo ena e ka 'na ea etsahala haeba sesebelisoa se sa lokisoe ka mokhoa o sa lokelang ka mochine, sensor ha e e-s'o kopane, kapa e senyehile.

E le ho rarolla bothata, hlahloba li-connections ho thibela terminal, etsa bonnete ba hore mohala oa ho hokahanya ha o senyehe 'me ha ho na potoloho e khutšoanyane,' me u hlahlobe hore na sensor e sebetsa hantle ka ho hokahanya sensor e 'ngoe sebakeng sa eona le ho hlahloba ho bala ha eona.

LIEKETSENG MOTS'OANE

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (36)

PHATLATSO EA EU EA TUMELO

Ka hona, re phatlalatsa tlasa boikarabello ba rona hore EU-I-1 e entsoe ke TECH STEROWNIKI II Sp. z oo, ntlo-kholo ea Wieprz Biała Droga 31, 34-122 Wieprz, e lumellana le Directive 2014/35/EU ea Paramente ea Europe le Lekhotla la 26 Hlakola 2014 mabapi le tumellano ea melao ea Linaha tseo e leng Litho tse amanang le ho fumaneha 'marakeng oa lisebelisoa tsa motlakase tse etselitsoeng ho sebelisoa ka har'a voltage meeli (EU OJ L 96, ea 29.03.2014, leq. 357), Directive 2014/30/EU ea Paramente ea Europe le Lekhotla la 26 Hlakola 2014 mabapi le ho lumellana ha melao ea Litho tsa Litho tse amanang le ho lumellana ha motlakase ( EU OJ L 96 of 29.03.2014, p.79), Taelo 2009/125/EC ho theha moralo oa ho beha litlhoko tsa ecodesign bakeng sa lihlahisoa tse amanang le matla hammoho le taolo ea MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY ea la 24 Phuptjane 2019 e lokisang molao o mabapi le litlhoko tsa bohlokoa mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki, lipehelo tsa ts'ebetsong tsa Directive (EU) 2017/2102 ea Paramente ea Europe le Lekhotla la 15 November 2017 le fetolang Directive 2011/65/EU mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki (OJ L 305, 21.11.2017, leq. 8) .

Bakeng sa tlhahlobo ea tumellano, ho ile ha sebelisoa litekanyetso tse lumellanang:

  • PN-EN IEC 60730-2-9:2019-06,
  • PN-EN 60730-1:2016-10,
  • PN EN IEC 63000:2019-01 RoHS.

TECH-CONTROLLERS-EU-I-1-Weather-Compensating-Mixing-Valve-Controller-Fig- (35)

Wieprz, 23.02.2024.

Litokomane / Lisebelisoa

BA LAOLI BA TECH EU-I-1 Boemo ba Leholimo ba Busetsang Motsoako oa Motsoako oa Valve [pdf] Bukana ea Mosebelisi
EU-I-1 Weather Compensing Motsoako oa Valve Controller, EU-I-1, Weather Compensating Motsoako oa Valve Controller, Compensating Re Mixing Valve Controller, Taolo ea Valve, Controller

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *