ANSMANN AES4 Timer LCD Ratidza Switch

Product Information

Chigadzirwa chine timer chine zvinotevera maficha:

• 12-awa uye 24-awa modhi sarudzo
• Random mode kuitira kuchengetedza zvinangwa
• Manual mashandiro ane matatu marongero: ON, AUTO, uye OFF
• Matekinoroji ehunyanzvi anosanganisira 230V AC / 50Hz yekubatanidza, kuremerwa kwe3680 / 16A, uye iko kurongeka kwe8.

Chigadzirwa chinouya nebhuku remushandisi mumitauro yakawanda kusanganisira chiGerman, Chirungu, French, uye Italian. Bhuku racho rine ruzivo rwakakosha rwekuchengetedza uye nhungamiro dzekushandisa.

Mirayiridzo Yekushandiswa Kwechigadzirwa

Random Mode:

1. Dzvanya bhatani reRANDOM angangoita maminetsi makumi matatu isati yadiwa ON nguva.
2. Iyo LCD skrini icharatidza "RANDOM" kuratidza kuti basa rakaitwa.
3. Batanidza timer mune socket uye ichave yakagadzirira kushandiswa.

Manual Operation:

Iyo LCD skrini inoratidza matatu marongero ekushanda kwemanyorero:

• ONI: Iyo timer inobatidzwa uye icharamba yakabatidzwa kusvika yakadzimwa nemaoko kana kuburikidza neotomatiki programming.
• AUTO: Iyo timer yakaiswa kuti ibatike nekudzima zvinoenderana neyakarongwa chirongwa.
• DZIMA: Iyo timer yakadzimwa uye haibatike kusvika yabatidzwa nemaoko kana kuti yarongwa kuti ibatike otomatiki.

Zvido zvehunyanzvi:

• Iyo timer inoda 230V AC / 50Hz yekubatanidza.
• Iyo yakanyanya kuremerwa ndeye 3680 / 16A.
• Iyo timer ine chokwadi che8.

Nzira dzekuchengetedza:

• Usafukidze chigadzirwa sezvo chinogona kukonzera moto.
• Usaisa chigadzirwa kumamiriro akanyanya akadai sekupisa kwakanyanya kana kutonhora.
• Usashandise chigadzirwa mumvura kana mudamp nzvimbo.
• Usakanda kana kudonhedza chigadzirwa.
• Usavhura kana kugadzirisa chigadzirwa. Basa rekugadzirisa rinofanirwa kuitwa chete nemugadziri kana nyanzvi ine hunyanzvi.

GENERAL INFO/ SHURE

Ndapota sunungura zvikamu zvose uye tarisa kuti zvinhu zvose zviripo uye hazvina kukuvara. Usashandise chigadzirwa kana chakakuvadzwa. Muchiitiko ichi, bata nyanzvi yemunharaunda yako yakatenderwa kana kero yebasa yemugadziri.

KUCHENGETEKA – KUTSANANGURWA KWEZVINHU

Ndokumbira utarise zvinotevera zviratidzo uye mazwi anoshandiswa mumirairo yekushanda, pachigadzirwa uye papakeji:

• Information: Inobatsira mamwe mashoko pamusoro pechigadzirwa
• Cherechedza: Chinyorwa chinokuyambira nezve kukuvara kungangoitika kwemarudzi ese
• Chenjero | Chenjerera: Njodzi inogona kukonzera kukuvara
• Yambiro | Chenjerera: Ngozi! Inogona kukonzera kukuvara kwakanyanya kana kufa

GENERAL

Iyi mirairo yekushanda ine ruzivo rwakakosha rwekutanga kushandiswa uye kujaira kushanda kwechigadzirwa ichi. Verenga kuburikidza nemirairo yekushanda yakazara zvakanyatsonaka usati washandisa chigadzirwa kekutanga. Verenga mirairo yekushandisa yezvimwe midziyo ichashandiswa nechigadzirwa ichi kana ichabatanidzwa kuchigadzirwa ichi. Chengeta iyi mirairo yekushandisa kuti ushandise mune ramangwana kana yeremangwana vashandisi. Kutadza kutevedzera mirairo yekushanda uye mirairo yekuchengetedza kunogona kukonzera kukuvara kwechigadzirwa uye njodzi (kukuvara) kune anoshanda uye nevamwe vanhu. Mirayiridzo yekushandisa inoreva kune anoshanda zviyero uye mirau yeEuropean Union. Ndokumbirawo utevedzere kumitemo negwara rakananga c kunyika yako.

GENERAL SAFETY MIrairo

Ichi chigadzirwa chinogona kushandiswa nevana kubva pazera remakore masere uye nevanhu vane zvishoma zvishoma zvemuviri, pfungwa kana pfungwa kana kushaya ruzivo uye ruzivo kana vakadzidziswa nezvekushandiswa kwakachengeteka kwechigadzirwa uye vachiziva nezvenjodzi. Vana havabvumidzwe kutamba nechigadzirwa. Vana havabvumidzwe kuchenesa kana kutarisira pasina kutariswa. Chengetedza chigadzirwa nekurongedza kure nevana. Ichi chigadzirwa hachisi chekutamba nacho. Vana vanofanirwa kutariswa kuti vaone kuti havasi kutamba nechigadzirwa kana kurongedza. Usasiye mudziyo usina kutarisirwa paunenge uchishanda. Usafumure munzvimbo dzinogona kuputika kune zvinwiwa zvinopisa, huruva kana magasi. Usambofa wakanyudza chigadzirwa mumvura kana zvimwe zvinwiwa. Shandisa chete socket ye mains inosvikika nyore kuitira kuti chigadzirwa chikurumidze kubviswa kubva kune mains kana paine chikanganiso. Usashandise mudziyo kana wakanyorova. Usamboshandisa mudziyo nemaoko akanyorova.

Chigadzirwa chacho chinogona kungoshandiswa mumakamuri akavharwa, akaoma uye akapamhama, kure nezvinhu zvinopisa uye zvinwiwa. Kusaremekedza kunogona kuguma nekutsva uye moto.

NGOZI: YEMOTO NEKUputika

• Usavhara chigadzirwa - njodzi yemoto.
• Usambofa wakafumura chigadzirwa kune zvakanyanyisa mamiriro, sekupisa kwakanyanya / kutonhora nezvimwe.
• Usashandise mumvura kana mu damp nzvimbo.

GENERAL FORMATION

• Usakanda kana kudonha
• Usavhura kana kugadzirisa chigadzirwa! Basa rekugadzirisa rinoitwa chete nemugadziri kana nenyanzvi yebasa inogadzwa nemugadziri kana nemunhu ane hunyanzvi zvakafanana.

RUZIVO RWEMAKAMIRA

KURASA

Rasa kurongedza mushure mekurongedza nemhando yezvinhu. Kadhibhodhi uye makadhibhokisi kune marara pepa, firimu kune recycling collection.

Rasa chigadzirwa chisingashandisi maererano nemitemo yepamutemo. Chiratidzo che "waste bin" chinoratidza kuti, muEU, hazvibvumidzwe kurasa midziyo yemagetsi mumarara epamba. Shandisa hurongwa hwekudzosera uye hwekuunganidza munharaunda yako kana kubata mutengesi wawakatenga chigadzirwa kubva kwaari.

Kuti urase, endesa chigadzirwa kune nyanzvi yekurasa michina yechinyakare. Usarase mudziyo nemarara emumba! Gara uchirasa mabhatiri akashandiswa & mabhatiri anochajwa zvakare maererano nemirau yenzvimbo uye zvinodiwa. Nenzira iyi iwe unozadzisa zvisungo zvako zvepamutemo uye nekubatsira mukuchengetedza kwezvakatipoteredza.

ZVINHU ZVINOTAURA

Ruzivo rwuri mukati memirayiridzo yekushanda iyi inogona kuchinjwa pasina kuziviswa. Isu hatigamuchire mhosva yezvakananga, zvisina kunanga, zvinongoerekana zvaitika kana kumwe kukuvadzwa kana kukonzeresa kukuvara kunomuka kunyangwe kubata / kushandiswa zvisina kunaka kana nekusakoshesa ruzivo rwuri mukati memirairo iyi yekushandisa.

KUSHANDISWA KWAZVO KWAKAITA

Ichi chishandiso inguva yevhiki nevhiki inoshandura iyo inokutendera iwe kudzora simba remagetsi emidziyo yemumba kuchengetedza simba. Iyo ine yakavakirwa-muNiMH bhatiri (isina-inotsiviwa) kuchengetedza marongero akarongwa. Usati washandisa, ndapota batanidza iyo unit kune mains socket kuti uichajise approx. 5-10 maminitsi. Kana bhatiri remukati risingachabhadhariswi, hapana chinoratidzwa pachiratidziro. Kana iyo unit ikabviswa kubva kune mains, bhatiri remukati richabata maitiro akarongwa e approx. 100 mazuva.

MABASA

• 12/24-awa kuratidza
• Kuchinja kuri nyore pakati pechando nezhizha
• Anosvika gumi mapurogiramu eiyo on/off basa pazuva
• Kuronga nguva kunosanganisira HOUR, MINUTE uye DAY
• Kugadzika nemaoko kwe "nguva dzose WAKABVA" kana "nguva dzose AKADZIMWA" pakubata bhatani
• Random setting kuti ubate nekudzima mwenje wako panguva dzakasarudzika kana wabuda
• Green LED chiratidzo kana soketi iri kushanda
• Mwana kuchengetedza mudziyo

PAKUTANGA KUSHANDISA

1. Dzvanya bhatani rekuti 'RESET' nepepa clip kuti ubvise marongero ese. Iyo LCD inoratidzira icharatidza ruzivo sezvakaratidzwa muFigure 1 uye iwe unozongopinda "Clock Mode" sezvakaratidzwa muFigure 2.
2. Iwe unogona ipapo kuenderera kune inotevera nhanho.

KUISA DIGITAL CLOCK IN Clock Mode

1. LCD inoratidza zuva, awa neminiti.
2. Kuseta zuva, dzvanya mabhatani e'CLOCK' uye 'WEEK' panguva imwe chete
3. Kuseta awa, tinya mabhatani e'CLOCK' uye 'HOUR' panguva imwe chete
4. Kuseta miniti, dzvanya 'CLOCK' uye 'MINUTE' mabhatani panguva imwe chete
5. Kuti uchinje pakati pe12-awa ne24-awa modhi, dzvanya mabhatani e'CLOCK' uye 'TIMER' panguva imwe chete.

ZHIzha

1. Kuti uchinje pakati penguva yakajairwa nenguva yechirimo, dzvanya uye ubate bhatani re'CLOCK, wobva wadzvanya bhatani re'ON/AUTO/OFF'. Iyo LCD inoratidzira inoratidza 'SUMMER'.

KUGADZIRA NGUVA YOKUBATIDZA UYE KUDZIMA NGUVA

Dzvanya bhatani re'TIMER' kuti uise iyo yekuseta modhi inosvika gumi yekuchinja nguva:

1. Dzvanya bhatani re'WEEK' kuti usarudze boka rinodzokorora remazuva raunoda kuchinjira payuniti. Mapoka acho anooneka nehurongwa:
   • MO -> TU -> WE -> TH -> FR -> SA -> SU MO TU WE TH FR SA SU -> MO TU WE TH FR -> SA SU -> MO TU WE TH FR SA -> MO WE FR -> TU TH SA -> MO TU WE -> TH FR SA -> MO WE FR SU.
2. Dzvanya bhatani re'HOUR' kuti uise awa
3. Dzvanya bhatani re'MINUTE' kuseta miniti
4. Dzvanya bhatani re'RES/RCL' kuti ubvise / kuseta zvakare marongero ekupedzisira
5. Dzvanya bhatani re'TIMER' kuti uende kune inotevera on/off chiitiko. Dzokorora matanho 4.1 - 4.4.

Ndapota cherechedza

• Iyo yekuseta modhi inomiswa kana pasina bhatani rinodzvanywa mukati memasekonzi makumi matatu. Iwe unogona zvakare kudzvanya bhatani re'CLOCK' kuti usiye iyo yekuseta.
• Kana ukadzvanya bhatani reHOUR, MINUTE kana TIMER kweanopfuura masekonzi matatu, marongero acho anoenderera mberi nekukasira.

RANDOM FUNCTION/ BURGLAR PROTECTION (RANDOM MODE)

Mambavha anotarisa dzimba kwehusiku hushoma kuti atarise kana varidzi vari pamba zvechokwadi. Kana maraiti achigara achibatidzwa nekudzima nenzira imwechete kune miniti, zviri nyore kuziva kuti timer iri kushandiswa. Mune RANDOM modhi, iyo timer inodzima nekudzima zvisina tsarukano kusvika hafu yeawa pamberi / gare gare pane yakapihwa pa / kudzima kuseta. Iri basa rinongoshanda neAUTO modhi yakabatiswa kumapurogiramu akaiswa pakati pe6:31 pm na5:30 am mangwanani anotevera.

1. Tapota gadza purogiramu uye iva nechokwadi chokuti iri mukati menguva kubva na6:31 pm kusvika na5:30 mangwanani anotevera.
2. Kana iwe uchida kuseta akawanda mapurogiramu kuti aite zvisina kurongeka modhi, ndapota ita shuwa kuti iyo OFF nguva yepurogiramu yekutanga ingangoita 31 maminetsi pamberi pe ON nguva yechipiri chirongwa.
3. Batidza kiyi RANDOM kungangoita maminetsi makumi matatu isati yarongwa ON nguva. RANDOM inoonekwa paLCD inoratidza kuti RANDOM basa raitwa. Batanidza timer mune socket uye yakagadzirira kushandiswa.
4. Kukanzura RANDOM basa, ingo dzvanya RANDOM bhatani zvakare uye iyo RANDOM chiratidzo chinonyangarika kubva pachiratidziro.

MAZUVA OPERATION

• LCD kuratidza: ON -> AUTO -> OFF -> AUTO
• ONI: Iyo unit yakasetwa ku "nguva dzose IRI".
• AUTO: Iyo unit inoshanda zvinoenderana neyakarongwa marongero.
• DZIMA: Iyo unit yakagadzirirwa "nguva dzose OFF".

TECHNICAL DATA

• Connection: 230V AC / 50Hz
• Rodha: max. 3680 / 16A
• Matembiricha ekushanda: -10 kusvika +40°C
• Kururama: ± 1 min/mwedzi
• Bhatiri (NIMH 1.2V): >100 mazuva

CHERECHEDZA: Iyo timer ine basa rekuzvidzivirira. Inogadzikiswa otomatiki kana chero yeanotevera mamiriro amuka:

1. Kusagadzikana kwezvino kana voltage
2. Kusabatana kwakashata pakati penguva nemudziyo
3. Kusangana kwakashata kwemudziyo wekutakura
4. Kurova kwemheni

Kana iyo timer ikagadziridzwa otomatiki, ndapota tevera mirairo yekushandisa kuti uigadzirise zvakare.

Chigadzirwa chinoenderana nezvinodiwa kubva kuEU mirairo.

Zvichienderana nekuchinja kwehunyanzvi. Hatina mhosva yekukanganisa pakudhinda.

Mabatiro evatengi

ANSMANN AG

• Industriestrasse 10 97959 Assamstadt Germany
• Nharembozha: +49 (0) 6294
  • 4204 3400
• E-Mail hotline@ansmann.de

MA-1260-0006/V1/07-2021

Zvinyorwa / Zvishandiso

ANSMANN AES4 Timer LCD Ratidza Switch [pdf] User Manual 968662, 1260-0006, AES4, AES4 Timer LCD Ratidza Switch, Timer LCD Ratidza Switch, LCD Ratidza Switch, Ratidza Switch

References

• User Manual