Lambda CS-3000 Series Curve Tracer
Ƙayyadaddun bayanai
- Model: Curve Tracer CS-3000 series (CS-3100, CS-3200, CS-3300)
- Collector Supply (HV Mode): Max.Peak voltage – 3 kV, Max. Peak current – 15 A, Max. peak power – 390 W
- Collector Supply (HC Mode): Max.PPeakvoltage – 30 V, Max. peak current – 7.5 A, Pulse width – 50 us to 400 us
- Step Generator: Step rate – 1/10 Step, Pulse width range – 50 us to 400 us
- Aunawa: Mai tarawa voltage range – HV: 50 mV/div to 500 V/div, HC: 50 mV/div to 5 V/div
Umarnin Amfani da samfur
Samar da Mai Tari
For HV mode, set the max. Peak voltage and current according to the specifications. For HC mode, adjust the settings as needed.
Mataki Generator
Set the step rate and pulse width within the specified ranges for accurate measurements.
Aunawa
Yi amfani da daidaitaccen mai tarawa voltage range based on the mode of operation for precise readings.
Ideal for measuring the characteristics of various semiconductors such as IGBTs, MOSFETs, transistors, and diodes etc.
- Matsakaicin mafi girma voltage 3,000V (high voltage mode)
- Maximum peak current 1,000A (CS-3300 high current mode)
- All models equipped with LEAKAGE mode (1pA cursor resolution)
- USB port to save screen data and setup data
- Equipped with La LAN interface for remote control
Easy-to-understand measurement screen
CS-3000 Series Specifications
Collector supply HV mode
| Samfura | CS-3100-300V * 2 | CS-3100 / CS-3200 / CS-3300 | |||
|---|---|---|---|---|---|
| Yanayin / polarity | Full wave rectification/ + – , DC/ + – , LEAKAGE/ + – , AC | ||||
| Matsakaicin mafi girma voltage | 300V | 30V | 3kV ku | 300V | 30V |
| Matsakaicin kololuwar halin yanzu (maximum peak pulse current * 1 ) |
750mA (1.5A * 1 ) |
7.5 A (15A * 1 ) |
75mA (150mA * 1 ) |
750mA (1.5A * 1 ) |
7.5 A (15A * 1 ) |
| Matsakaicin iko mafi girma | 120mW / 1.2W / 120W / 390W (Cannot be set when using the maximum peak voltage of 3kV) | ||||
| Horizontal axis range | 50mV～500V/div | ||||
- The maximum instantaneous current value that can be generated (varies depending on the target to be measured and conditions), the measurement should be less than or equal to the maximum peak current value.
Collector supply HC mode
| Samfura | CS-3100 / CS-3100-300V * 2 | Saukewa: CS-3200 | Saukewa: CS-3300 | |||
|---|---|---|---|---|---|---|
| Yanayin / polarity | Not equipped with HC mode | Pulse/ + – | ||||
| Matsakaicin mafi girma voltage | 40V | |||||
| Matsakaicin kololuwar halin yanzu | 400 A | 40 A | 1,000 A | 400 A | 40 A | |
| Matsakaicin iko mafi girma | 4kW | 400W | 10kW | 4kW | 400W | |
| Faɗin bugun bugun jini | Pulse width is variable at 50µs to 400µs (10µs resolution) | |||||
| Wurin aunawa | The measurement point can be specified (10µs resolution) | |||||
| Vertical axis range | 100mA～50A/div | 100mA～100A/div | ||||
| Gwajin gwaji | Saukewa: CS-301 | Saukewa: CS-302 | ||||
Ƙididdigar gama gari
| Loop correction | Hardware | Correction ofthe floating capacitance between the collector supply and the ground | |
| Software | Pseudo-looping through software optimisation | ||
| Generator mataki | Kashewa | Saitin kewayon | -10 ～ +10 x STEP AMPLITUDE Setting |
| Ƙaddamarwa | 1% of the STEP AMPLITUDE setting | ||
| Yanayin yanzu | Rage | 50nA to 200mA per step, 21 steps, 1-2-5 switching | |
| Matsakaicin halin yanzu | 2A | ||
| Matsakaicin voltage | 10V ko fiye | ||
| Voltage yanayin | Rage | 50mV to 2V per step, 6 steps, 1-2-5 switching | |
| Matsakaicin halin yanzu | 500mA～(～8V), 200mA～(～15V), 10mA～(～40V) | ||
| Matsakaicin voltage | ± 40V | ||
| Adadin mataki | 2x 50Hz or 60Hz (1x in AC mode), pulse interval in HC mode | ||
| Matakin bugun jini | Faɗin bugun bugun jini | 50µs～400µs (10µs step) When in HC mode, the pulse width is 100µs wide before and after the pulse of the collector supply |
|
| Yawan matakai | 0～20 Step | ||
| AUX fitarwa | Rage | OFF, -40V～+40V (Variable in 100mV steps) | |
| Yanayin aunawa | Maimaita, TSAYA/KURA, TSAYA | ||
| Axis a tsaye (full scale 10div) |
Mai tara halin yanzu | Rage | HV mode：1µA/div to 2A/div, 20 steps 1-2-5 switching (HC mode is not included) |
| Daidaito | 2% + 0.05 x VERT/div of readout To this, add the loop correction error for the following maximum peak voltages 0.5µA(30V), 1µA(300V), 6µA(3kV), 12µA(5kV) Specify at least 10% of the maximum peak voltage for 30V, 300V, and 3kV, and at least 30% for 5kV |
||
| Emitter halin yanzu (LEAKAGE) |
Rage | 1nA/div～2mA/div, 20 step 1-2-5 switching (Collector supply mode is LEAKAGE) |
|
| Daidaito | 2% + 0.05 x VERT/div + 1nA or less of readout | ||
| A tsaye axis (full scale 10div) |
Mai tarawa voltage |
Rage | HC mode：50mV/div to 5V/div, 7 steps 1-2-5 switching (HV mode is not included) |
| Daidaito | 2% + 0.05 x HORIZ/div or less of readout | ||
| Base/ emitter voltage |
Rage | 50mV/div~5V/div, 7 step 1-2-5 switching | |
| Daidaito | 2% + 0.05 x HORIZ/div or less of readout | ||
| Nunawa | Nunawa | 8.4-inch TFT LCD | |
| Yawan maki bayanai | 1,000 points/trace (AC, full wave rectification) 20～1,000 points/trace (SWEEP mode) |
||
| Trace display | Point interpolation display, dot display | ||
| Matsakaicin | OFF, 2 to 255 times | ||
| Dagewa | OFF, SHORT, LONG, Infinite length | ||
| Save internal waveform (REF) | 4 panel | ||
| Siginan kwamfuta | DOT | Vert, Horiz, β or gm | |
| fLINE | Vert, Horiz, 1/grad, intercept | ||
| KYAUTA | Vert, Horiz, β or gm | ||
| WINDOW | Vert, Horiz, β or gm in the WINDOW area | ||
| Data save/read | Ƙwaƙwalwar ajiya | Setup：256 pcs, REF：4 screens | |
| Ƙwaƙwalwar waje | USB1.1：Setup, waveform, screen hardcopy (BMP, TIFF, PNG) | ||
| Nisa | Equipped with a remote 10BASE-T/100BASE-TX 1 port via LAN connection | ||
| Tushen wutan lantarki | AC100～240V 50/60Hz, Maximum operating power：500VA (400W), Standby：50VA (7W) | ||
| External dimensions(mm) Nauyi |
CS-3100 / CS-3100-300V * 2 | Approx. 424W x 220H x 555D (excluding protrusions and accessories) approx. 28kg (excluding accessories) |
|
| CS-3200, 3300 | Approx. 424W x 354H x 555D (excluding protrusions and accessories) approx. 43kg (excluding accessories) |
||
CS-3100-300V is a made-to-order product.
Standard Na'urorin haɗi
| Saukewa: CS-500 Gwajin adaftar | |
|---|---|
 |
This is a jig for connecting the part to be measured, provided by the customer, and the fixture. (Standard accessories) |
FAQs
Tambaya: Menene zan yi idan fadin bugun bugun jini ya yi kunkuntar?
A: If the pulse width is narrow, adjust the settings to widen it within the allowable range to generate the max. peak voltage.
Tambaya: Yadda za a daidaita kayan samar da mai tarawa?
A: The collector supply output can be calibrated by enabling/disabling the output and adjusting the floating capacity as per the instructions provided.
Takardu / Albarkatu
 |
Lambda CS-3000 Series Curve Tracer [pdf] Jagoran Jagora CS-3100, CS-3200, CS-3300, CS-3000 Series Curve Tracer, Curve Tracer, Tracer |