Buka ea mosebelisi ea Munters Green RTU RX Module Programming

Lenaneo la GREEN RTU RX Module
Bukana ea Mosebelisi
Khatiso: N.1.1 ea 07.2020
Software ea Sehlahisoa: N/A

Bukana ena ea ts'ebeliso le tlhokomelo ke karolo ea bohlokoa ea lisebelisoa hammoho le litokomane tsa tekheniki tse hoketsoeng.

Tokomane ena e etselitsoe mosebelisi oa lisebelisoa: e kanna ea se hlahisoe e felletse kapa karolo e itseng, e itlamme mohopolong oa khomphutha joalo ka file kapa e isoa ho batho ba boraro ntle le tumello ea pele ea mokopanyi oa sistimi.

Munters e na le tokelo ea ho etsa liphetoho ho lisebelisoa ho latela tsoelo-pele ea tekheniki le ea molao.

1 Selelekela

1.1 Boitlhaloso

Munters o na le tokelo ea ho etsa liphetoho ho litlhaloso, bongata, litekanyo jj bakeng sa tlhahiso kapa mabaka a mang, kamora ho phatlalatsoa. Tlhahisoleseling e fumanehang mona e hlophisitsoe ke litsebi tse tšoanelehang kahare ho Munters. Le ha re lumela hore tlhaiso-leseling e nepahetse ebile e felletse, ha re etse waranti kapa boemeli bakeng sa merero efe kapa efe. Tlhahisoleseling e fanoa ka tumelo e ntle le ka kutloisiso ea hore ts'ebeliso efe kapa efe ea li-unit kapa lisebelisoa ho tlola litaelo le litemoso tsa tokomane ena ke ka boikhethelo le kotsi ea mosebelisi.

1.2 Selelekela

Kea leboha ka khetho ea hau e ntle ea ho reka Mochini oa GREEN RTU RX! Bakeng sa ho fumana melemo e felletseng sehlahisoa sena ho bohlokoa hore e kenngoe, e laeloe le ho sebetsoa ka nepo. Pele o kenya kapa o sebelisa sesebelisoa, bukana ena e lokela ho ithutoa ka hloko. E boetse e khothalletsoa hore e bolokoe e bolokehile bakeng sa ts'ebeliso ea nako e tlang. Buka ea tataiso e reretsoe ho supa ho kenya, ho kenya tšebetsong le ts'ebetso ea letsatsi le letsatsi ea Balaoli ba Munters.

1.3 Lintlha

Letsatsi la tokollo: Mots'eanong 2020
Bahoebi ba ke ke ba tiisetsa ho tsebisa basebelisi ka liphetoho kapa ho ba fa libuka tse ncha.
HLOKOMELA Litokelo tsohle li sirelelitsoe. Ha ho karolo ea bukana ena e ka hlahisoang hape ka mokhoa ofe kapa ofe ntle le tumello e ngotsoeng ea Munters. Likahare tsa bukana ena li ka fetoha ntle le tsebiso.

2 Ho kenya Battery ea Lenaneo la Hand Held

• Ha u bua ka Setšoantšo sa 1 se kaholimo, tlosa sekoaelo sa phaposi ea betri ebe u ntša sehokedi sa betri se senyehileng.
• Hokela betri e ncha e tjhajiloeng ka botlalo ea 9VDC PP3 ho sehokedi sa betri se senyehileng. Ho tla utloahala molumo o hlakileng oa lentsoe o netefatsang hore motlakase o sebelisitsoe ho yuniti.
• Ka hloko kenya loom ea motlakase le betri ka lekarecheng la betri ebe o kenya sekoahelo sa lekareche la betri.

2.1 Ho hokela Lenaneo le Tšoereng ka letsoho

HLOKOMELA E tsejoa e le HHP ho Mojule oa Moamoheli

• Bula matlo a betri mojuleng oa moamoheli ka ho tlosa polaka ea rabara phapusing ea li-module tsa liamoheli (Se ke oa sebelisa lisebelisoa tse bohale ho fihlela sena).

• Ha u bua ka Setšoantšo sa 2 kaholimo, ntša betri, thapo ea betri le thapo ea mananeo ho tsoa ka phapusing ea li-module tsa li-module.
• Tlosa betri mojuleng oa moamoheli ka ho ts'oara sehokelo sa betri ka tieo lipakeng tsa monoana oa hau oa letsoho le o motona ka letsohong le le leng 'me sehokedi sa li-module tsa seamoheli se tiile lipakeng tsa monoana oa letsoho le o motona ka lehlakoreng le leng. Ka ntšang polaka ka soketeng ho hakolla betri.

• Ha ho buuoa ka Setšoantšo sa 3 le sa 4 kaholimo, HHP e tla ba le marapo a kenang a nang le likhoele tse 5 e leng Red (+), Black (-), White (Programming), Purple (Programming) le Green (Reset). Likhoele tse khubelu le tse ntšo li emisoa ka sehokelong sa socket ha likhoele tsa Yellow, Blue le Green li emisoa ka polakeng. Marapo a hokahanyang a tla ba le konopo e khubelu ea ho seta bocha e kentsoeng sekoahelong sa sehokedi sa DB9 sa thapo ea marapo.
• Kopanya likhoele tse khubelu le tse ntšo ho tloha ho HHP le khokahano ea betri ea module ea Receiver.
• Hokela lithapo tse mosehla, tse putsoa le tse tala tsa HHP le lithapo tse tšoeu, tse pherese le tse tala tsa mojule oa Moamoheli. Mojule oa seamoheli o tla ba le sehokedi se loketseng ho thibela khokahano e fosahetseng hore e se ke ea etsahala.

2.2 Ho seta mochini oa seamohedi

HLOKOMELA Etsa ts'ebetso ena pele u bala kapa u etsa programme module ea moamoheli. Hang ha HHP e hokahantsoe le module ea Receiver, tobetsa konopo ea "Red" e fumanehang sekoahelong sa sekonopo sa DB9 mochining oa cable cable ka nako ea metsotsoana e 2. Sena se nchafatsa processor ka module ho lumella mananeo a hanghang le ho bala module ea Receiver ntle le tieho (tlhoko ea matla a ho qhalana).

2.3 Ts'ebetso e akaretsang ea Lenaneo le Tšoaroang ka Letsoho

• Tobetsa konopo ea "Menu" ho letlapa. Sesepa se bontšitsoeng ho Setšoantšo sa 5 se ka tlase se tla hlaha. Mofuta oa software oa sebini (Mohlala V5.2) o tsejoa hukung e kaholimo ea letsoho le letona la ponts'o.

• Mesebetsi e latelang e leshome ea fumaneha tlasa "Menu". Mesebetsi ena e tla hlalosoa ka botlalo tokomaneng ena.

1. Lenaneo
2. Bala
3. Nomoro ea valve
4. Palo ea Valve
5. ID ea sistimi
6. Sys ID e eketsehileng
7. Mofuta oa Yuniti
8. Palo ea MAX
9. Ntlafatsa ho fihlela ho 4 (tšobotsi ena e fumaneha feela haeba lintlafatso tse lefuoang esale pele li laeloa ho HHP)
10. Liqeto. Mocha

• Sebelisa le le linotlolo letlapeng la mananeo ho tsamaisa lipakeng tsa mesebetsi e fapaneng. The senotlolo se tsamayang dipakeng tsa dimenu ka tatellano e nyolohang (ke hore, ho tloha ho la 1 la menyu ho ya ho la 10). The senotlolo se tsamayang pakeng tsa dimenu ka tatellano e theohelang (ke hore, ho tloha lenaneng la 10 ho isa ho la 1).

2.4 Ho utloisisa Screen Settings ea HHP

Nako le nako ha module ea Receiver e "baloa" kapa "e hlophisitsoe" (joalo ka ha ho hlalositsoe ka botlalo ka tlase) skrine se latelang se tla hlaha ho Hand Held Programmer. Setšoantšo sa 6 ka tlase se fana ka tlhaloso ea e 'ngoe le e' ngoe ea libaka tse behiloeng.

2.5 Ho hlophisa module ea seamohedi

• Mohato oa 1: Ho beha liaterese tsa tlhahiso ho module ea Receiver.
• Mohato oa 2: Ho ipehela palo ea liphetho tse hlokahalang mojulung oa seamohedi
• Mohato oa 3: Ho beha ID ea li-module tsa Receiver
• Mohato oa 4: Ho beha li-module tsa Receiver module tse ling tsa Sys
• Mohato oa 5: Ho beha mofuta oa li-module tsa Receiver
• Mohato oa 6: Ho hlophisa Channel ea Freepeency module
• Mohato oa 7: Ho hlophisa module ea Receiver ka li-setting tse fapaneng

2.5.1 MOHATO OA 1: HO SEBELETSA LIPUISANO TSA LITLHAKU TSE KHOLO TSE FUMANEHANG.

1. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 3. belofo num (bareng).
2. Tlanya ENT
3. Sebelisa metsu ho khetha aterese e nepahetseng bakeng sa nomoro ea pele ea tlhahiso ho module ea Receiver.
4. Tlanya ENT hape.
   Mohl. Haeba module e hlophiselitsoe ho 5, tlhahiso ea pele e tla ba 5 mme tse ling li tla latela ka tatellano. Mojule oa Receiver o nang le liphetho tse 3 o tla sebetsoa ka tsela e latelang: Sephetho sa 1 e tla ba aterese ea 5, tlhahiso ea 2 e tla ba liaterese tsa 6 mme tlhahiso ea 3 e tla sebetsoa 7.

HLOKOMELA Qoba ho beha li-module tsa Receiver liaterese tsa pele tsa tlhahiso sebakeng se tla etsa hore tlhahiso ea bobeli, ea boraro kapa ea bone e kopane le boleng ba tlhahiso ea 32 le 33, 64 le 65, kapa 96 le 97.
Mohl. Haeba seamohedi sa mela e 4 se behiloe ka la 31, lihlahisoa tse ling e tla ba 32, 33 le 34. Liphetho tsa 33 le 34 li ke ke tsa sebetsa. Liaterese tsa tlhahiso ea li-module li se li behiloe ho HHP mme li hloka ho jarollwa ho module ea Receiver hang ha mananeo a mang kaofela a phethetsoe (Sheba mohato oa 7).

2.5.2 MOHATO OA BOBELI: HO SEBETSA PALO EA LIPHETHO TSE HLOKAHALANG MOLEKELENG OA MOFI

1. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 4. belofo chelete.
2. Tlanya ENT
3. Sebelisa metsu ho khetha palo ea liphetho tse tla sebelisoa mochining oa Seamohedi.
   HLOKOMELA
   Mojuleng o hlophiselitsoeng feme bakeng sa mela e 2 feela; ho ka khethoa sephetho se phahameng sa 2. Mojuleng o hlophiselitsoeng feme bakeng sa mela e 4 feela; ho ka khethoa sephetho se phahameng sa 4. Ho khonahala ho khetha ka tlase ho hore feme e behiloeng bokaalo empa bonyane ba tlhahiso e le 'ngoe bo tlameha ho khethoa.
4. Etsa khetho ea hau ebe o tobetsa ENT
   • Palo ea liphetho tsa li-module tsa Receiver e se e behiloe ho HHP mme e hloka hore e jarolloe mojuleng oa Receiver hang ha mananeo a mang kaofela a phethetsoe (Sheba mohato oa 7).

2.5.3 MOHATO OA 3: HO SENYA ID ea MOKHOA OA HO FUMANA LITLHAKU TSE KHOLO

1. Sisteme ea Sistimi e kopanya moamoheli oa seamohedi o nang le sesebelisoa se fetisang se nang le Sisteme e tšoanang ea Sisteme.
2. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho ea ho 5. ID ea Sisteme
3. Tlanya ENT
4. Sebelisa metsu ho khetha ID ea tsamaiso Mefuta ea khetho e tloha ho 000 ho isa ho 255.
5. Hang ha nomoro e tsamaellanang le nomoro e sebelisoang ke sesebelisoa sena se fetisang e khethiloe, tobetsa ENT hape.

HLOKOMELA Ho bohlokoa ho netefatsa hore sistimi ena e ke ke ea kena-kenana le sistimi e ngoe e sebelisang ID e tšoanang
• ID ea li-module tsa Receiver module e se e hlophisitsoe ho HHP mme e hloka hore e jarolloe mojuleng oa Receiver hang ha mananeo a mang kaofela a phethetsoe (Sheba mohato oa 7).

2.5.4 MOHATO OA 4: HO SEBELETSA ID ea LIOMOLELO TSE FUMANEHANG

TLHOKOMELISO Karolo ena ha e tšehetsoe ke li-module tsa seamohedi tsa GREEN RTU.
Extra Sys (teem) ID e kopanya module ea Receiver le sesebelisoa sa fetisang se nang le ID e tšoanang ea Sys. E sebetsa ka mokhoa o ts'oanang le Sisteme ea Sisteme joalokaha e hlalositsoe tlasa Mohato oa 3 kaholimo. Morero oa ID ea Sys e eketsehileng ke ho fana ka li-ID tse eketsehileng tse tla sebelisoa ho feta li-ID tsa Sistimi tse tloaelehileng tsa 256.

1. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 6. Extra Sys ID
2. Tlanya ENT
3. Sebelisa metsu ho khetha ID e eketsehileng ea Sys. Mefuta ea khetho e tloha ho 0 ho isa ho 7.
4. Hang ha nomoro e tsamaellanang le nomoro e sebelisoang ke sesebelisoa sena se fetisang e khethiloe, tobetsa ENT hape.

HLOKOMELA Ho bohlokoa ho netefatsa hore sistimi ena e ke ke ea kena-kenana le sistimi e ngoe e sebelisang ID e tšoanang
• Li-module tsa Receiver Extra Systems ID li se li hlophisitsoe ho HHP 'me li hloka hore li jarolloe mojuleng oa Receiver hang ha mananeo a mang kaofela a phethetsoe (Sheba mohato oa 7).

2.5.5 MOHATO OA 5: HO SEBETSA MOTHO OA MOLEKI OA MOLELEKI

Mofuta oa Yuniti e bua ka mofuta oa protocol e se nang mohala e sebelisoang tsamaisong ena. Sena se tloaetsoeng ho hlalosoa ke mofuta oa sesebelisoa sa fetisang empa ka kakaretso NTSE ke ea G3 kapa mefuta e mecha ea li-module tsa Receiver mme OLD ke ea mofuta oa G2 kapa oa khale oa module ea Receiver.

1. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 7. Type Unit
2. Tlanya ENT
3. Sebelisa metsu ho khetha pakeng tsa OLD le mofuta o mocha oa seamohedi.
   HLOKOMELA
   Haeba mofuta oa software POPTX XX o fumaneha kareteng ea li-radio transmitter interface kapa haeba RX Module / s e sebelisoang ke GREEN RTU, module e lokela ho beoa ho mofuta o Mocha. Haeba mofuta oa software REMTX XX o fumaneha kareteng ea li-radio transmitter interface, module e lokela ho beoa ho mofuta oa OLD. Lisebelisoa tse ling tsohle tse fetisang li tla amana le moloko oa moamoheli oa Receiver o ntseng o sebelisoa.
4. Tlanya ENT
   • Mofuta oa software ea li-module o se o hlophisitsoe ho HHP mme o hloka hore o jarolleloe mojuleng oa moamoheli hang ha mananeo ohle a mang a phethetsoe (Sheba mohato oa 7).

2.5.6 MOHATO OA 6: HO SEBETSA CHANELISI EA TLHOKOMELISO EA MOLELEKI

TLHOKOMELISO Karolo ena ha e tšehetsoe ke G4 kapa mefuta ea pejana ea li-module tsa seamohedi.
Frequency Channel e bua ka kanale eo litsamaiso tse se nang mohala tsa TX Module e hlophiselitsoeng ho sebetsa ho eona (Sheba tokomane "915_868_433MHz Transmitter Module Installation Guide.pdf" bakeng sa tlhaiso-leseling e batsi). Morero oa seteishene sa seteishene ke ho lumella lits'ebetso tse haufi haholo hore li sebetse ntle le tšitiso ea litsamaiso tse ling sebakeng se haufi ka ho beoa kanaleng e fapaneng (maqhubu).

1. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 10. Mofuta wa yuniti.
2. Tlanya ENT.
3. Sebelisa metsu ho khetha nomoro ea kanale eo litsamaiso tse se nang mohala tsa TX module e hlophiselitsoeng ho sebetsa ho eona. (Sheba tokomane "915_868_433MHz Transmitter Module Installation Guide.pdf" bakeng sa tlhaiso-leseling e batsi).
   HLOKOMELA Ha o sebelisa module ea fetisang ea 915MHz ho na le liteishene tse 15 (1 ho isa ho 15) tse fumanehang. Sena se lekanyelitsoe ho liteishene tse 10 feela (1 ho isa ho 10) ha u sebelisa li-module tsa transmitter tsa 868 kapa 433MHz.
4. Tlanya ENT.
   • Mocha oa maqhubu a li-module o se o hlophisitsoe ho HHP mme o hloka hore o jarolleloe mojuleng oa moamoheli hang ha mananeo ohle a mang a phethetsoe (Sheba mohato oa 7).

2.5.7 MOHATO OA 7: HO RATELA MOHLALELELELE OA HO FUMANA LITLHAKISO TSE FAPANENG

1. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 1. Lenaneo
2. Hlokomela li-LED tse tala le tse khubelu mojuleng oa Receiver o seng o le haufi le ho hlophisoa.
3. Tlanya ENT.

• Leseli le Lefubelu le le Lefubelu le lokela ho bonesa (hoo e ka bang motsotsoana o le mong) nakong ea ts'ebetso ea ho jarolla maemo ho tloha ho HHP ho ea ho module ea Receiver. Ka bobeli LED e tla tima hang ha ts'ebetso ea ho jarolla e phethile.
• LED e Tala e tla bonesa metsotsoana e seng mekae ebe e tima moo kamora maemo a jarollotsoeng a seng a tla hlaha skrineng sa HHP ho latela setšoantšo se ka tlase.
• Haeba litlhophiso li hlaha ho latela se khethiloeng, module ea Receiver e se e loketse ts'ebetso ea tšimo.

Setšoantšong se kaholimo, mofuta oa firmware oa RX module ke V5.0P, li-module tsa khokahano ea likhokahanyo tse se nang mohala li hlophiselitsoe ho NW (e ncha), kanale ea maqhubu a li-module e behiloe ho C10 (kanale 10), palo e phahameng ea li-module e hlahisitsoeng ke M : 4 (4), ID e eketsehileng ea sistimi e behiloe ho I00 (0), ID ea sistimi e behiloe ho 001 (1), tlhahiso ea pele e behiloe ho V: 001 (01) le palo ea 'nete ea liphetho tsa ts'ebetso ho module ke A4 (4) ho ka bolelang hore mojule ona o laola litholoana tsa 01, 02, 03 le 04.

2.6 Mokhoa oa ho bala Mojule oa seamohedi

1. Tobetsa MENU.
2. Lenaneng le ka sehloohong la moqapi, sebelisa metsu ho fallela 2. Bala
3. Tobetsa ENT 4. Shebella li-LED ho module ea Receiver e seng e tlo balloa.
4. Leseli le Lefubelu le le Lefubelu le lokela ho bonesa hang bakeng sa motsotsoana o le mong ebe le tima.

• LED e Tala e tla bonesa metsotsoana e meng e mmaloa ebe e tima moo kamora sethala se amanang le module ena ea Receiver se tla hlahang skrineng sa HHP (ho latela setšoantšo se ka tlase). Sena se ka nka metsotswana e mmalwa ho ntjhafatsa.
• Haeba efe kapa efe ea li-setting tsena e fosahetse kapa e hloka ho ntlafatsoa, ​​pheta mehato ea 1 ho isa ho ea 6 tlasa "Ho hlophisa module ea moamoheli" kaholimo.

2.7 Ho hakolla mojule oa moamoheli ho HHP

Hang ha ho bala kapa ho bala ho se ho phethiloe, hakolla module ea Receiver theha HHP ebe o hokela betri ea li-module tsa Receiver hape.

• Mojule oa seamohedi o tla etsa bocha hang hang ha betri e hoketsoe hape.
• Li-LED tse khubelu le tse tala li lokela ho bonesa.
• LED e Tala e tla tima 'me Leseli le Lefubelu le tla lula le buletsoe metsotso e 5 kamora hore betri e hokeloe hape.
• Nakong ea metsotso e 5 e hlalositsoeng kaholimo, ha leqhubu la seea-le-moea le sebetsa mojuleng ona oa seamoheli (ID e ts'oanang le lets'oao le fetisitsoeng), e ka amoheloa ke yuniti, LED e tala e tla khanya kapele.
• Haeba lintlha tse amanang le sehlahisoa se le seng kapa tse ling li amohetsoe ke mojule ona, lihlahisoa li tla kengoa ts'ebetsong kapa li emisoe ho ipapisitsoe le boemo bo kopiloeng. Ka nako ena nakong ea metsotso e 5 LED e tala le eona e tla benya hakhutšoanyane.

3 Tiisetso

Warranty le thuso ea botekgeniki
Lihlahisoa tsa Munters li entsoe le ho hahuoa ho fana ka ts'ebetso e tšepahalang le e khotsofatsang empa e ke ke ea netefatsoa ntle le liphoso; le hoja e le lihlahisoa tse ka tšeptjoang li ka hlahisa mathata a sa lebelloang 'me mosebedisi o lokela ho ela hloko sena le ho hlophisa lisebelisoa tse lekaneng tsa tšohanyetso kapa alamo haeba ho hlōleha ho sebetsa ho ka baka tšenyo ea lihlooho tseo semela sa Munters se neng se batloa bakeng sa sona: haeba sena se sa etsoa, mosebedisi o ikarabella ka botlalo bakeng sa tshenyo eo a ka e hlahelang.

Munters o fetisetsa waranti ena e lekanyelitsoeng ho moreki oa pele mme o tiisa hore lihlahisoa tsa eona li tla hloka liphoso tse tsoang tlhahisong kapa lisebelisuoa tsa selemo se le seng ho tloha ka letsatsi la thomello, ha feela ho latela melao e loketseng ea lipalangoang, polokelo, ho hlongoa le ho hlokomeloa. Guarantee ha e sebetse haeba lihlahisoa li lokisitsoe ntle le tumello e hlakileng ea Munters, kapa li lokisitsoe ka tsela eo, ho latela kahlolo ea Munters, ts'ebetso ea bona le ts'epahalo li senyehile, kapa li kentsoe hampe, kapa li sebelisoa hampe. Mosebelisi o amohela boikarabello ka botlalo ba tšebeliso e fosahetseng ea lihlahisoa.

Guarantee ea lihlahisoa tse tsoang ho bafani ba kantle e kentsoeng ho GREEN RTU RX Programmer, (ea exampLisebelisoa, ho ea teng, jj. Munters o na le matsatsi a mashome a mararo ho tloha ka letsatsi la kamohelo leo a lokelang ho nka bohato ka lona, ​​mme o na le tokelo ea ho lekola sehlahisoa moahong oa moreki kapa polanteng ea sona (theko ea kariki e tla jaroa ke moreki).

Munters ka boikhethelo ba eona e na le khetho ea ho nchafatsa kapa ho lokisa, ntle ho tefo, lihlahisoa tseo e li nkang li na le phoso, 'me e tla hlophisa hore li khutlisetsoe koloing ea bareki e lefuoeng. Maemong a likarolo tse fosahetseng tsa boleng bo bonyenyane ba khoebo tse fumanehang ka bongata (joalo ka li-bolts, jj.) Bakeng sa ho romelloa ka potlako, moo theko ea koloi e ka fetang boleng ba likarolo,

Munters e ka fa moreki tumello ea ho reka likarolo tse ncha sebakeng sa heno; Munters e tla buseletsa boleng ba sehlahisoa ka theko ea sona ea theko. Li-Munters li ke ke tsa jara boikarabello ba litšenyehelo tse bileng teng ha ho theoloa karolo e nang le phoso, kapa nako e hlokoang ea ho ea sebakeng sa marang-rang le litšenyehelo tse tsamaellanang le maeto. Ha ho moemeli, mohiruoa kapa morekisi ea lumelletsoeng ho fana ka tiiso e ngoe kapa ho amohela mokoloto o fe kapa o fe molemong oa Munters mabapi le lihlahisoa tse ling tsa Munters, ntle le ka ho ngola ka saena sa e mong oa Batsamaisi ba Khamphani.

TLHOKOMELISO: Molemong oa ho ntlafatsa boleng ba lihlahisoa le lits'ebeletso tsa eona, Munters e boloka tokelo ka nako efe kapa efe ntle le tsebiso ea pele ea ho fetola litlhaloso bukaneng ena.

Boikarabello ba moetsi oa Munters bo khaotsa ha ho ka ba le:

• ho qhaqha lisebelisoa tsa tšireletso;
• tšebeliso ea lisebelisoa tse sa lumelloeng;
• tlhokomelo e sa lekaneng;
• tshebediso ya dikarolo le disebediswa tse ding tseo e seng tsa mantlha.

Ntle le lipehelo tse khethehileng tsa konteraka, tse latelang li lefelloa ke mosebelisi ka kotloloho:

• ho lokisa libaka tsa ho kenya;
• ho fana ka phepelo ea motlakase (ho kenyeletsoa le conductor equipotential bonding (PE) ho latela CEI EN 60204-1, serapa sa 8.2), bakeng sa ho hokahanya lisebelisoa ka nepo ho phepelo ea motlakase e kholo;
• ho fana ka litšebeletso tsa tlatsetso tse loketseng litlhoko tsa polante ho latela lintlha tse fanoeng mabapi le ho kenya;
• lisebelisoa le lisebelisoa tse hlokahalang bakeng sa ho kenya le ho kenya;
• Lisebelisoa tse hlokahalang bakeng sa ho laeloa le ho hlokomeloa.

Hoa hlokahala ho reka le ho sebelisa likarolo tse ling tsa mantlha feela kapa tse khothaletsoang ke moetsi.
Ho qhaqha le ho bokana ho tlameha ho etsoa ke litsebi tse tšoanelehang le ho latela litaelo tsa moetsi.
Tšebeliso ea likarolo tse ling tseo e seng tsa pele kapa kopano e fosahetseng e ntša moetsi molatong oohle.
Likopo tsa thuso ea tekheniki le likarolo tse ling li ka etsoa ka kotloloho ofising e haufi ea Munters. Lenane le felletseng la lintlha tsa mabitso le ka fumanoa leqepheng le ka morao la bukana ena.

Munters Iseraele
Seterata sa 18 HaSivim
Petach-Tikva 49517, Iseraele
Mohala: + 972-3-920-6200
Fax: + 972-3-924-9834

www.munters.com

Australia Munters Pty Limited, Mohala + 61 2 8843 1594, Brazil Munters Brasil Industria e Comercio Ltda, Mohala +55 41 3317 5050, Canada Munters Corporation Lansing, Mohala + 1 517 676 7070, China Munters Air Treatment Equipment (Beijing) Co. Ltd, Mohala +86 10 80 481 121, Denmark Munters A / S, Mohala +45 9862 3311, India Munters India, Mohala +91 20 3052 2520, Indonesia Munters, Mohala +62 818 739 235, Iseraele Mohala oa Israel Munters + 972-3-920-6200, Italy Munters Italy SpA, Chiusavecchia, Mohala + 39 0183 52 11, Japane Munters KK, Mohala +81 3 5970 0021, Korea Munters Korea Co Ltd., Mohala +82 2 761 8701, Mexico Munters Mexico, Mohala +52 818 262 54 00, Singapore Munters Pte Ltd., Mohala +65 744 6828, Se atamela Afrika le Linaha tse ka boroa ho Sahara Munters (Pty) Ltd., Mohala +27 11 997 2000, Spain Munters Spain SA, Mohala + 34 91 640 09 02, Sweden Munters AB, Mohala +46 8 626 63 00, Thailand Munters Co Ltd., Mohala +66 2 642 2670, kalakuni Foromo ea Munters Endüstri Sistemleri A., Mohala +90 322 231 1338, usa Munters Corporation Lansing, Mohala + 1 517 676 7070, Vietnam Munters Vietnam, Mohala +84 8 3825 6838, Export & Linaha tse ling Munters Italy SpA, Chiusavecchia Mohala + 39 0183 52 11

Litokomane / Lisebelisoa

Munters Green RTU RX Module Programming [pdf] Bukana ea Mosebelisi Lenaneo la Green RTU RX Module, Sesebelisoa sa Puisano

Litšupiso

• Bukana ea Mosebelisi