FPW-R-15S Fa'asologa Toe Fa'aaoga Fa'atū'aiga Wedge
“
Fa'amatalaga
Oloa: Toe fa'aoga Tulaga Wedge
Ufiufi Mea: Dartex (top portion), PVC
Non-Skid
Fausia: Sonic Welding (top cover Dartex to
Dartex seams), Sewn (Dartex to non-slip seams)
Avanoa Umi: FPW-R-15S (15 inches / 38 cm),
FPW-R-20S (20 inches / 51 cm), FPW-RB-26S (26 inches / 66 cm)
Avanoa avanoa: FPW-R-15S (11 inches / 28 cm),
FPW-R-20S (11 inches / 28 cm), FPW-RB-26S (12 inches / 30 cm)
Avanoa Maualuluga: FPW-R-15S (7 inches / 18 cm),
FPW-R-20S (7 inches / 18 cm), FPW-RB-26S (8 inches / 20 cm)
Numera Fa'ata'ita'i: FPW-R-15S, FPW-R-20S,
FPW-RB-26S
Vaega Faaopoopo: Free of Forever Chemicals
(PFAS)
Fa'atonuga o le Fa'aaogaina o Mea
- Center the patient on the HoverMatt or HoverSling with link
strap(s) unconnected. Ensure the bed is flat. - Place the air supply next to the caregiver on the opposite side
of the turn direction. Insert the hose into the foot-end of the
mattress and start the airflow by selecting the appropriate
faamau. - Once fully inflated, slide the patient in the opposite
direction of the turn, positioning them close to the edge of the
bed for central alignment. - Position the wedge between the HoverMatt or HoverSling and the
bed surface with arrows facing up. Place one wedge below the sacrum
and another one hand’s width above to support the upper body. - Lower the patient onto the wedges, ensuring straps are not
underneath the HoverMatt or HoverSling. Confirm sacrum is not
touching the bed, adjust bed head if needed, and raise siderails
per protocol.
Fesili e Fai soo
1. Can the Reusable Positioning Wedge be laundered?
No, it is recommended not to launder the wedge to maintain its
non-slip benefit.
2. Are replacement covers available for the wedges?
Yes, replacement covers can be purchased separately for the
Reusable Positioning Wedges.
“`
Reusable Wedge Manual
30-Degree Foam Positioning Wedge
Tusi Taiala
Asiasi www.HoverTechInternational.com mo isi gagana
FA'AIGA
Symbol Reference ………………………………………………….2 Intended Use and Precautions………………………………….3 Part Identification – Reusable Wedge…………………………4 Reusable Wedge Product Specifications…………………….4 Instructions for Use ………………………………………………..5 Cleaning and Preventive Maintenance ………………………6 Returns and Repairs………………………………………………..7
Reusable Positioning Wedge User Manual
Fa'ailoga Fa'asino
CAUTION / WARNING DISPOSAL OPERATING INSTRUCTIONS LATEX FREE LOT NUMBER MANUFACTURER
DATE OF MANUFACTURE MEDICAL DEVICE SERIAL NUMBER DO NOT LAUNDER UNIQUE DEVICE IDENTIFIER
2 | HoverTech
ReusableWedgeManual, Rev. A
Reusable Positioning Wedge User Manual
Fa'aoga ma Fa'atonuga
FA'A'OA'OGA
The HoverTech Reusable Positioning Wedge assists caregivers with patient positioning. Patient turning and wedge placement relieves pressure on bony prominences aiding Q2 compliance. The wedge delivers a 30-degree turning angle for patients at risk for pressure injuries. The anti-slip material keeps the wedge properly placed under the patient and in place with the bed to reduce patient sliding. The wedge may be used with any HoverMatt® Single Patient Use Mattress or HoverSling® Repositioning Sheet.
I N D I C AT I O N S
· Patients that need Q2 turning for pressure off-loading of bony prominences.
· Patients with compromised skin breakdown.
TOTONU I IONS
· Do not use with patients whose medical condition contraindicates turning.
FA'AIGA TAUSAGA
· Hospitals, long-term or extended care facilities.
PRECAUTIONS REUSABLE POSITIONING WEDGE
· For in-bed positioning tasks, more than one caregiver may need to be used.
· Use this product only for its intended purpose as described in this manual.
E tatau ona si'i a'e fa'atasi ma se tagata tausi e to'atasi.
Do not place the Reusable Positioning Wedge into a pillowcase in order to maintain the non-slip benefit.
ReusableWedgeManual, Rev. A
www.HoverTechInternational.com | 3
Reusable Positioning Wedge User Manual
Part Identification Reusable Positioning Wedge
30-degree angle supports proper off-loading.
Heat sealed seams available on Dartex® cover.
Extra-firm core topped with extra-plush memory foam for enhanced comfort & pressure redistribution.
FPW-R-15S
Reusable 30° Positioning Wedge
Waterfall Flap covers the top half of the zipper enclosure.
Non-slip cover reduces sliding and secures the wedge in place.
Wipeable material -compatible with hospital disinfectants.
Fa'amatalaga o oloa
REUSABLE POSITIONING WEDGE
Cover Material: Dartex, (top portion), PVC Non-Skid
Fausia:
Sonic Welding, (top cover Dartex to Dartex seams) Sewn, (Dartex to non-slip seams)
Length: Width: Height
FPW-R-15S 15″ (38 cm) FPW-R-20S 20″ (51 cm) FPW-RB-26S 26″ (66 cm)
FPW-R-15S 11″ (28 cm) FPW-R-20S 11″ (28 cm) FPW-RB-26S 12″ (30 cm)
FPW-R-15S 7″ (18 cm) FPW-R-20S 7″ (18 cm) FPW-RB-26S 8″ (20 cm)
Model #s: FPW-R-15S FPW-R-20S FPW-RB-26S
Free of Forever Chemicals, (PFAS)
4 | HoverTech
ReusableWedgeManual, Rev. A
Reusable Positioning Wedge User Manual
Instructions for Use with HoverMatt® PROSTM, HoverMatt®, or HoverSling®
WEDGE PL ACEMENT WITH AIR-ASSISTED MATTRESSES PUSH DOWN METHOD (2 CAREGIVERS)
1. Center patient on the HoverMatt or HoverSling, with link strap(s) unconnected. The bed should be in a flat position.
2. Place the air supply next to the caregiver on the opposite side of the turn direction. Insert the hose into the foot-end of the mattress and initiate air flow by selecting the appropriate button for the size of the product being used.
3. Once fully inflated, slide the patient in the opposite direction of the turn, slide them as close to the edge of the bed as possible to ensure that when the patient is repositioned they will be centered on the bed.
4. To turn the patient on their side, the caregiver on the side patient will turn towards will gently push down on the HoverMatt or HoverSling at the patient’s shoulder and hip, while the turning caregiver gently pulls up on the handles. Once the patient is turned on their side, the caregiver the patient is turned towards will stay with the patient while the turning caregiver presses the STANDBY button to stop air flow. The caregiver supporting the patient may hold the handles of the HoverMatt or HoverSling while the other caregiver places the wedges.
5. Place the wedge between the HoverMatt or HoverSling and the bed surface with the arrows facing up. Clinical judgment should be used when positioning wedges. Locate the sacrum and place one wedge below the sacrum. Position the other wedge, one hand’s width above the lower wedge to support the patient’s upper body.
6. Lower the patient onto the wedges, ensure straps are not underneath the HoverMatt or HoverSling. Check wedge placement by placing your hand between the wedges, confirming the sacrum is not touching the bed. Raise the head of the bed as desired and recheck the sacrum. Raise the siderails or follow your facility’s protocol.
WEDGE PL ACEMENT WITH A CEILING OR PORTABLE LIFT (SINGLE CAREGIVER)
1. For use with any HoverMatt or HoverSling products, a ceiling or portable lift can be utilized for patient turns to place the wedge.
2. Raise the siderails on the opposite side of the bed the patient will be turned toward. Ensure the patient is centered, with link strap(s) unconnected, and slide the patient in the opposite direction of the turn using either a supine lift (see the HoverSling User Manual) technique or air-assisted technique as detailed above. This will allow the patient to be centered on the bed when repositioned on the wedges.
3. Attach the shoulder and hip loop straps (HoverSling) or the shoulder and hip handles (HoverMatt) to the hanger bar which should be parallel to the bed. Raise the lift to initiate the turn.
4. Place the wedge between the HoverMatt or HoverSling and the bed surface with the patient side facing up. Clinical judgment should be used when positioning wedges. Locate the sacrum and place one wedge below the sacrum. Position the other wedge, one hand’s width above the lower wedge, to support the patient’s upper body.
5. Lower the patient onto the wedges, ensure straps are not underneath the HoverMatt or HoverSling. Check wedge placement by placing your hand between the wedges, confirming the sacrum is not touching the bed. Raise the head of the bed as desired and recheck the sacrum. Raise the siderails or follow your facility’s protocol.
WEDGE PLACEMENT NON-AIR (2 CAREGIVERS)
1. For use with the non-air HoverMatt® PROSTM or HoverMatt® PROSTM Sling, ensure patient is centered, with link strap(s) unconnected, and slide the patient in the opposite direction of the turn to ensure there is room for the turn with the patient centered in the bed when repositioned. Using good ergonomic stature, manually turn the patient using the turning handles or the sling straps.
2. Place the wedge between the HoverMatt PROS or HoverMatt PROS Sling and the bed surface with the patient side facing up. Clinical judgment should be used when positioning wedges. Locate the sacrum and place one wedge below the sacrum. Position the other wedge, one hand’s width above the lower wedge, to support the upper body of the patient.
3. Lower the patient onto the wedges. Check wedge placement by placing your hand between the wedges, confirming the sacrum is not touching the bed. Raise the head of the bed as desired and recheck the sacrum. Raise the siderails or follow your facility’s protocol.
ReusableWedgeManual, Rev. A
www.HoverTechInternational.com | 5
Reusable Positioning Wedge User Manual
Fa'amamā ma Puipuiga Puipuia
REUSABLE POSITIONING WEDGE CLEANING INSTRUCTIONS
In between patient uses, the reusable wedge should be wiped down with a cleaning solution used by your hospital for medical equipment disinfection. A 10:1 bleach solution (10 parts water: one part bleach) or disinfectant wipes can also be used. NOTE: Cleaning with bleach solution may discolor fabric. First remove any visible soil, then clean the area according to the cleaning product manufacturer’s recommended dwell time and level of saturation. Allow to air dry before using.
Do not launder or place it in a dryer.
TAUSAGA FAAVAE
Prior to use, a visual inspection should be performed on the wedge to ensure that there is no visible damage that would render it unusable. If any damage is found that would cause the wedge not to function as intended, the wedge should be removed from use and discarded.
PULEINA O FISI
If the Reusable Wedge is used for an isolation patient, the hospital should employ the same protocols/procedures it utilizes for the bed mattress and/ or for linens in that patient room.
Pe a oʻo se oloa i le faʻaiʻuga o lona olaga, e tatau ona tuʻueseese i ituaiga meafaitino ina ia mafai ona toe faʻaaogaina pe lafoai lelei vaega e tusa ai ma manaʻoga i le lotoifale.
Felauaiga ma Teuina
O lenei oloa e le manaʻomia ni tulaga faʻapitoa e teu ai.
6 | HoverTech
ReusableWedgeManual, Rev. A
Reusable Positioning Wedge User Manual
Toe Fa'afo'i ma Toe Fa'aleleia
O oloa uma e toe fa'afo'i i le HoverTech e tatau ona i ai se numera Fa'atagaina o Oloa Fa'afo'i (RGA) na tu'uina atu e le kamupani. Fa'amolemole vala'au 800-471-2776 ma fesili mo se sui o le RGA Team na te tuuina atu ia te oe se numera RGA. So'o se oloa e toe fa'afo'i mai e aunoa ma se numera RGA o le a mafua ai le tuai i le taimi toe fa'aleleia. O oloa toe faafoi e tatau ona lafo i:
HoverTech Attn: RGA # ___________ 4482 Innovation Way Allentown, PA 18109
Mo oloa fa'amaonia, asiasi i la matou webnofoaga: https://hovertechinternational.com/standard-product-warranty/
HoverTech 4482 Innovation Way Allentown, PA 18109 www.HovertechInternational.com Info@HovertechInternational.com These products comply with the standards applicable for Class 1 products in the Medical Device Regulation (EU) 2017/745 on medical devices.
ReusableWedgeManual, Rev. A
www.HoverTechInternational.com | 7
4482 Innovation Way Allentown, PA 18109
800.471.2776 Fax 610.694.9601
HoverTechInternational.com Info@HoverTechInternational.com
Pepa / Punaoa
 |
HOVERTECH FPW-R-15S Series Reusable Positioning Wedge [pdf] Tusi Taiala FPW-R-15S, FPW-R-20S, FPW-RB-26S, FPW-R-15S Series Reusable Positioning Wedge, FPW-R-15S Series, Reusable Positioning Wedge, Positioning Wedge, Wedge |