Sambungake Tech Inc Rudi-NX Embedded System Pandhuan pangguna
ESD Warning
Komponen lan sirkuit elektronik sensitif marang ElectroStatic Discharge (ESD). Nalika nangani sembarang rakitan papan sirkuit kalebu Majelis operator Connect Tech COM Express, disaranake supaya pancegahan safety ESD diamati. Praktik paling aman ESD kalebu, nanging ora diwatesi ing:
- Ninggalake papan sirkuit ing kemasan antistatik nganti siap dipasang.
- Nggunakake tali bangkekan grounded nalika nangani papan sirkuit, paling sampeyan kudu ndemek obyek logam grounded kanggo dissipate sembarang daya statis sing ana ing sampeyan.
- Mung nangani papan sirkuit ing wilayah aman ESD, sing bisa uga kalebu lantai ESD lan alas meja, stasiun tali bangkekan lan jas lab aman ESD.
- Nyingkiri nangani papan sirkuit ing area karpet.
- Coba nangani papan kanthi pinggir, supaya ora kena kontak karo komponen.
RIWAYAT REVISI
| Revisi | Tanggal | Owah-owahan |
| 0.00 | 2021-08-12 | Rilis Pambuka |
| 0.01 | 2020-03-11 |
|
| 0.02 | 2020-04-29 |
|
| 0.02 | 2020-05-05 |
|
| 0.03 | 2020-07-21 |
|
| 0.04 | 2020-08-06 |
|
| 0.05 | 2020-11-26 |
|
| 0.06 | 2021-01-22 |
|
| 0.07 | 2021-08-22 |
|
PAMBUKA
Sambungake Tech Rudi-NX nggawa NVIDIA Jetson Xavier NX deployable kanggo pasar. Desain Rudi-NX kalebu Input Daya Pengunci (+9 nganti +36V), Dual Gigabit Ethernet, video HDMI, 4 x USB 3.0 Type A, 4 x GMSL 1/2 Cameras, USB 2.0 (w/OTG functionality), M .2 (B-Key 3042, M-Key 2280, lan E-Key 2230 fungsi; panel akses ngisor), 40 Pin Locking konektor GPIO, 6-Pin Locking Isolated Full-Duplex CAN, baterei RTC, lan dual purpose Reset/ Force Recovery tombol push karo Power LED.
Fitur lan Spesifikasi Produk
| Fitur | Rudi-NX |
| Kompatibilitas Modul | NVIDIA® Jetson Xavier NX™ |
| Ukuran Mekanik | 109mm x 135mm x 50mm |
| USB | 4x USB 3.0 (Konektor: USB Tipe-A) 1x USB 2.0 OTG (Micro-B) 1x USB 3.0 + 2.0 Port menyang M.2 B-Key 1x USB 2.0 kanggo M.2 E-Key |
| Kamera GMSL | 4x Input Kamera GMSL 1/2 (Konektor: Quad Micro COAX) Deserializers Dipasang ing Papan Carrier |
| Jaringan | 2x 10/100/1000BASE-T Uplink (1 Port Saka Pengontrol PCIe PHY) |
| Panyimpenan | 1x NVMe (M.2 2280 M-KEY) 1x Slot Card SD |
| Ekspansi Nirkabel | 1x Modul WiFi (M.2 2230 E-KEY)1x Modul LTE (M.2 3042 B-KEY) w/ Konektor Kartu SIM |
| Misc. Aku/O | 2x UART (1x Konsol, 1x 1.8V) 1x RS-485 2x i2c 2x SPI 2x pwm 4x GPIO 3 x5v 3 x3.3v 8x GND |
| BISA | 1x Isolated CAN 2.0b |
| Baterai RTC Kab | Wadah baterei CR2032 |
| Tombol Push | Dual Tujuan Reset / Force Recovery Fungsionalitas |
| LED Status | Daya LED apik |
| Daya Input | Input Daya DC +9V nganti +36V (Mini-Fit Jr. 4-Pin Locking) |
Nomer Part / Informasi Pesenan
| Nomer Part | Katrangan | Modul sing diinstal |
| ESG602-01 | Rudi-NX w/ GMSL | ora ana |
| ESG602-02 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel |
| ESG602-03 | Rudi-NX w/ GMSL | M.2 2280 NVMe – Samsung |
| ESG602-04 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – Samsung |
| ESG602-05 | Rudi-NX w/ GMSL | M.2 3042 LTE-EMEA – Quectel |
| ESG602-06 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 3042 LTE-EMEA – Quectel |
| ESG602-07 | Rudi-NX w/ GMSL | M.2 2280 NVMe – Samsung M.2 3042 LTE-EMEA – Quectel |
| ESG602-08 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – SamsungM.2 3042 LTE-EMEA – Quectel |
| ESG602-09 | Rudi-NX w/ GMSL | M.2 3042 LTE-JP – Quectel |
| ESG602-10 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 3042 LTE-JP – Quectel |
| ESG602-11 | Rudi-NX w/ GMSL | M.2 2280 NVMe – Samsung M.2 3042 LTE-JP – Quectel |
| ESG602-12 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – SamsungM.2 3042 LTE-JP – Quectel |
| ESG602-13 | Rudi-NX w/ GMSL | M.2 3042 LTE-NA – Quectel |
| ESG602-14 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 3042 LTE-NA – Quectel |
| ESG602-15 | Rudi-NX w/ GMSL | M.2 2280 NVMe – Samsung M.2 3042 LTE-NA – Quectel |
| ESG602-16 | Rudi-NX w/ GMSL | M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – SamsungM.2 3042 LTE-NA – Quectel |
PRODUK OVERVIEW
Diagram Blokir
Lokasi Konektor
NGAREP VIEW
Maca VIEW
NGIRING VIEW (COVER DIBUANG)
Ringkesan Konektor Internal
| Desainer | Konektor | Katrangan |
| P1 | 0353180420 | +9V kanggo +36V Mini-Fit Jr 4-Pin DC Power Input Konektor |
| P2 | 10128796-001RLF | M.2 3042 B-Key 2G / 3G / LTE Konektor Modul Selular |
| P3 | SM3ZS067U410AER1000 | M.2 2230 E-Key WiFi / Konektor Modul Bluetooth |
| P4 | 10131758-001RLF | M.2 2280 M-Key NVMe SSD Konektor |
| P5 | 2007435-3 | Konektor Video HDMI |
| P6 | 47589-0001 | Konektor USB 2.0 Micro-AB OTG |
| P7 | JXD1-2015NL | Dual RJ-45 Gigabit Ethernet Konektor |
| P8 | 2309413-1 | Konektor Papan-Kanggo-Papan NVIDIA Jetson Xavier NXModule |
| P9 | 10067847-001RLF | Konektor kertu SD |
| P10 | 0475530001 | Konektor kertu SIM |
| P11A, B | 48404-0003 | Konektor USB3.0 Tipe-A |
| P12A, B | 48404-0003 | Konektor USB3.0 Tipe-A |
| P13 | TFM-120-02-L-DH-TR | 40 Pin Konektor GPIO |
| P14 | 2304168-9 | GMSL 1/2 Konektor Kamera Kotak |
| P15 | TFM-103-02-L-DH-TR | 6 Pin Isolated CAN Konektor |
| BAT1 | BHSD-2032-SM | Konektor Baterei CR2032 RTC |
Ringkesan Konektor Eksternal
| Panggonan | Konektor | Mating Part utawa Konektor |
| Ngarep | PWR IN | +9V kanggo +36V Mini-Fit Jr 4-Pin DC Power Input Konektor |
| Ngarep | HDMI | Konektor Video HDMI |
| Mbalik | OTG | Konektor USB 2.0 Micro-AB OTG |
| Mbalik | GbE1, GbE2 | Dual RJ-45 Gigabit Ethernet Konektor |
| Ngarep | KARTU SD | Konektor kertu SD |
| Ngarep | SIM KARTU | Konektor kertu SIM |
| Mbalik | USB 1, 2, 3, 4 | Konektor USB3.0 Tipe-A |
| Ngarep | PENGEMBANGAN I/O | 40 Pin Konektor GPIO |
| Ngarep | GMSL | GMSL 1/2 Konektor Kamera Kotak |
| Ngarep | BISA | 6 Pin Isolated CAN Konektor |
| Ngarep | SYS | Reset / Force Recovery Pushbutton |
| Mbalik | ANTI 1, 2 | Antena |
Ngalih Ringkesan
| Desainer | Konektor | Katrangan |
| SW1-1 SW1-2 | 1571983-1 | Mung Test Manufaktur (Internal) BISA Mandheg Aktifake / Pateni |
| SW2 | TL1260BQRBLK | Tombol Push Reset/Recovery Fungsi Ganda (Eksternal) |
| SW3 | 1571983-1 | Pilihan Ngalih DIP Kanggo GMSL 1 utawa GMSL 2 (Internal) |
DESKRIPSI FITUR DETAIL
Konektor Modul Rudi-NX NVIDIA Jetson Xavier NX
Prosesor lan chipset NVIDIA Jetson Xavier NX dileksanakake ing Modul Jetson Xavier NX.
Iki nyambung menyang NVIDIA Jetson Xavier NX menyang Rudi-NX liwat konektor TE Connectivity DDR4 SODIMM 260 Pin
| Fungsi | Katrangan |  |
| Panggonan | Internal kanggo Rudi-NX | |
| Jinis | Modul | |
| Pinout | Deleng Lembar Data NVIDIA Jetson Xavier NX. | |
| Fitur | Deleng Lembar Data NVIDIA Jetson Xavier NX. |
Cathetan: A Thermal Transfer Plate dipasang ing modul NVIDIA Jetson Xavier NX internal kanggo Rudi-NX. Panas bakal nyebar menyang ndhuwur sasis Rudi-NX.
Konektor HDMI Rudi-NX
Modul NVIDIA Jetson Xavier NX bakal ngasilake video liwat konektor HDMI vertikal Rudi-NX sing nduweni kemampuan HDMI 2.0.
| Fungsi | Katrangan |  |
| Panggonan | Ngarep | |
| Jinis | Konektor vertikal HDMI | |
| Konektor Kawin | Kabel HDMI Tipe-A | |
| Pinout | Waca Standar HDMI |
Konektor Rudi-NX GMSL 1/2
Rudi-NX ngidini GMSL 1 utawa GMSL 2 liwat konektor Quad MATE-AX. GMSL kanggo MIPI Deserializers ditempelake ing papan operator sing nggunakake video MIPI 4-Lane saben 2 kamera.
Kajaba iku, Rudi-NX ngasilake + 12V Power Over COAX (POC) kanthi kemampuan saiki 2A (500mA saben kamera).
| Fungsi | Katrangan |  |
|
| Panggonan | Ngarep | ||
| Jinis | Konektor Kamera GMSL 1/2 | ||
| Kabel Mating | Quad Fakra GMSL Cable4 Posisi MATE-AX nganti 4 x FAKRA Z-code 50Ω RG174 Kabel CTI P/N: CBG341 |  |
|
| Pin | MIPI-Lanes | Katrangan |  |
| 1 | CSI 2/3 | Konektor Kamera GMSL 1/2 | |
| 2 | CSI 2/3 | Konektor Kamera GMSL 1/2 | |
| 3 | CSI 0/1 | Konektor Kamera GMSL 1/2 | |
| 4 | CSI 0/1 | Konektor Kamera GMSL 1/2 | |
Konektor Rudi-NX USB 3.0 Type-A
Rudi-NX nggabungake 4 konektor USB 3.0 Type-A vertikal kanthi watesan saiki 2A saben konektor. Kabeh port USB 3.0 Type-A nduweni kemampuan 5Gbps.
| Fungsi | Katrangan |  |
| Panggonan | mburi | |
| Jinis | Konektor USB Tipe-A | |
| Konektor Kawin | Kabel USB Tipe-A | |
| Pinout | Deleng USB Standard |
Rudi-NX 10/100/1000 Konektor Ethernet Dual
Rudi-NX ngleksanakake 2 x konektor ethernet RJ-45 kanggo komunikasi internet. Konektor A disambungake langsung menyang modul NVIDIA Jetson Xavier NX. Konektor B disambungake liwat PCIe Gigabit Ethernet PHY menyang ngalih PCIe.
| Fungsi | Katrangan |  |
| Panggonan | mburi | |
| Jinis | Konektor RJ-45 | |
| Konektor Kawin | Kabel Ethernet RJ-45 | |
| Pinout | Waca Ethernet Standard |
Rudi-NX USB 2.0 OTG / Host Mode Konektor
Rudi-NX ngleksanakake konektor USB2.0 Micro-AB kanggo ngidini akses mode host menyang modul utawa OTG sumunar modul
| Fungsi | Katrangan |  |
| Panggonan | mburi | |
| Jinis | Konektor USB Micro-AB | |
| Konektor Kawin | USB 2.0 Micro-B utawa Micro-AB Kabel | |
| Pinout | Deleng USB Standard |
Cathetan 1: Kabel USB Micro-B dibutuhake kanggo OTG Flashing.
Cathetan 2: Kabel USB Micro-A dibutuhake kanggo Mode Host.
Konektor kertu SD Rudi-NX
Rudi-NX ngleksanakake konektor Full-Size SD Card.
| Fungsi | Katrangan |  |
| Panggonan | Ngarep | |
| Jinis | Konektor kertu SD | |
| Pinout | Waca Standar kertu SD |
Konektor GPIO Rudi-NX
Rudi-NX ngleksanakake Samtec TFM-120-02-L-DH-TR Konektor kanggo ngidini kontrol pangguna tambahan. 3 x Daya (+5V, +3.3V), 9 x Ground, 4 x GPIO (GPIO09, GPIO10, GPIO11, GPIO12), 2 x PWM (GPIO13, GPIO14), 2 x I2C (I2C0, I2C1), 2 x SPI (SPI0, SPI1), 1 x UART (3.3V, Console), lan antarmuka RS485.
| Fungsi | Katrangan |  |
||
| Panggonan | Ngarep | |||
| Jinis | Konektor Ekspansi GPIO | |||
| Konektor Carrier | TFM-120-02-L-DH-TR | |||
| Kabel Mating | SFSD-20-28C-G-12.00-SR | |||
| Pinout | warna | Katrangan | Tipe I/O |  |
| 1 | coklat | +5V | daya | |
| 2 | abang | SPI0_MOSI (3.3V Maks.) | O | |
| 3 | Oranye | SPI0_MISO (3.3V Maks.) | I | |
| 4 | kuning | SPI0_SCK (3.3V Maks.) | O | |
| 5 | Ijo | SPI0_CS0# (3.3V Maks.) | O | |
| 6 | Violet | +3.3V | daya | |
| 7 | abu-abu | GND | daya | |
| 8 | Putih | SPI1_MOSI (3.3V Maks.) | O | |
| 9 | ireng | SPI1_MISO (3.3V Maks.) | I | |
| 10 | Biru | SPI1_SCK (3.3V Maks.) | O | |
| 11 | coklat | SPI1_CS0# (3.3V Maks.) | O | |
| 12 | abang | GND | daya | |
| 13 | Oranye | UART2_TX (3.3V Maks., Konsol) | O | |
| 14 | kuning | UART2_RX (3.3V Maks., Konsol) | I | |
| 15 | Ijo | GND | daya | |
| 16 | Violet | I2C0_SCL (Maks. 3.3V) | Aku/O | |
| 17 | abu-abu | I2C0_SDA (Maks. 3.3V) | Aku/O | |
| 18 | Putih | GND | daya | |
| 19 | ireng | I2C2_SCL (Maks. 3.3V) | Aku/O | |
| 20 | Biru | I2C2_SDA (Maks. 3.3V) | Aku/O | |
| 21 | coklat | GND | daya | |
| 22 | abang | GPIO09 (3.3VMax.) | O | |
| 23 | Oranye | GPIO10 (3.3VMax.) | O | |
| 24 | kuning | GPIO11 (3.3VMax.) | I | |
| 25 | Ijo | GPIO12 (3.3VMax.) | I | |
| 26 | Violet | GND | daya | |
| 27 | abu-abu | GPIO13 (PWM1, 3.3VMax.) | O | |
| 28 | Putih | GPIO14 (PWM2, 3.3VMax.) | O | |
| 29 | ireng | GND | daya | |
| 30 | Biru | RXD+ (RS485) | I | |
| 31 | coklat | RXD- (RS485) | I | |
| 32 | abang | TXD+ (RS485) | O | |
| 33 | Oranye | TXD- (RS485) | O | |
| 34 | kuning | RTS (RS485) | O | |
| 35 | Ijo | +5V | daya | |
| 36 | Violet | UART1_TX (3.3V Maks.) | O | |
| 37 | abu-abu | UART1_RX (Maks. 3.3V) | I | |
| 38 | Putih | +3.3V | daya | |
| 39 | ireng | GND | daya | |
| 40 | Biru | GND | daya | |
Rudi-NX Isolated CAN Konektor
Rudi-NX ngleksanakake Samtec TFM-103-02-L-DH-TR Konektor kanggo ngidini Isolated CAN karo builtin 120Ω mandap. 1 x Daya Terisolasi (+5V), 1 x CANH Terisolasi, 1 x CANL Terisolasi, 3 x Lemah Terisolasi.
| Fungsi | Katrangan |  |
|
| Panggonan | Ngarep | ||
| Jinis | Konektor CAN terisolasi | ||
| Konektor Carrier | TFM-103-02-L-DH-TR | ||
| Kabel Mating | SFSD-03-28C-G-12.00-SR | ||
| Pinout | warna | Katrangan |  |
| 1 | coklat | GND | |
| 2 | abang | +5V Isolasi | |
| 3 | Oranye | GND | |
| 4 | kuning | SUP | |
| 5 | Ijo | GND | |
| 6 | Violet | CANL | |
Cathetan: Dibangun ing 120Ω mandap bisa dening dibusak karo request customer. Hubungi Connect Tech Inc kanggo rincian liyane.
Rudi-NX Reset & Force Recovery Pushbutton
Rudi-NX ngleksanakake tombol push fungsi dual kanggo loro Reset lan Recovery saka platform. Kanggo Reset modul, mung pencet terus tombol kanggo minimal 250 milidetik. Kanggo nyelehake modul Jetson Xavier NX menyang mode Force Recovery, penet terus tombol push kanggo minimal 10 detik.
| Fungsi | Katrangan |  |
| Panggonan | mburi | |
| Jinis | Tombol Push | |
| Tombol Reset Pencet | Minimal 250ms (typ.) | |
| Tombol Recovery Pencet | Minimal 10s (typ.) |
Konektor Daya Rudi-NX
Rudi-NX ngleksanakake Mini-Fit Jr.. Konektor Daya 4-Pin sing nampa daya +9V kanggo +36V DC.
| Fungsi | Katrangan |  |
| Panggonan | Ngarep | |
| Jinis | Mini-Fit Jr. 4-Pin Konektor | |
| Input Minimal Voltage | + 9 V DC | |
| Input Maksimum Voltage | + 36 V DC | |
| Kabel CTI Mating Kab | CTI PN: CBG408 |
Cathetan: A Power Supply saged 100W utawa luwih dibutuhake kanggo operate Rudi-NX karo kabeh peripheral mlaku ing rating maksimum pamilike.
Rudi-NX GMSL 1/2 DIP Ngalih Pilihan
Rudi-NX internal ngetrapake 2 posisi DIP Switch kanggo pilihan GMSL 1 utawa GMSL 2.
| Fungsi | Katrangan |  SW3 SISI KIRI (ON) SW3-2 SW3-1 SISI KANAN (OFF) |
| Panggonan | Internal Kanggo Rudi-NX | |
| Jinis | Ngalih DIP | |
| SW3-1 - OFF SW3-2 - OFF | GMSL1 Mode Kakebalan Dhuwur - ON | |
| SW3-1 - ON SW3-2 - OFF | GMSL23 Gbps | |
| SW3-1 - OFF SW3-2 - ON | GMSL26 Gbps | |
| SW3-1 - ON SW3-2 - ON | GMSL1 Mode Kakebalan Dhuwur - OFF |
Rudi-NX CAN Mandheg Aktifake / Pateni Pilihan Ngalih DIP
Rudi-NX internal ngetrapake 2 posisi DIP Switch kanggo Ngaktifake utawa Mateni Resistor Terminasi CAN saka 120Ω.
| Fungsi | Katrangan |  |
| Panggonan | Internal kanggo Rudi-NX | |
| Jinis | Ngalih DIP | |
| SW1-1 – OFF SW1-2 – OFF |
Tes Manufaktur Mung CAN Mandheg Pateni |
|
| SW1-1 – ON SW1-2 – ON |
Tes Manufaktur Mung CAN Mandheg Aktifake |
Cathetan: CAN Mandap Dipateni minangka standar nalika dikirim menyang customer.
Hubungi Connect Tech Inc. yen sampeyan pengin nyetel Mandap supaya Aktif sadurunge kiriman.
Konektor Antena Rudi-NX
Sasis Rudi-NX ngetrapake 4x Konektor Antena SMA (Opsional) kanggo internal M.2 2230 E-Key (WiFi / Bluetooth) lan M.2 3042 B-Key (Seluler).
| Fungsi | Katrangan |  |
| Panggonan | Ngarep lan Mburi | |
| Jinis | Konektor SMA | |
| Konektor Kawin | Konektor Antena |
INSTALASI KHAS
- Priksa manawa kabeh sumber daya sistem eksternal mati lan pedhot.
- Instal kabel sing dibutuhake kanggo aplikasi sampeyan. Minimal iki kalebu:
a) Kabel daya menyang konektor daya input.
b) Kabel Ethernet menyang porte (yen ana).
c) Kabel tampilan video HDMI (yen ana).
d) Keyboard, Mouse, lsp liwat USB (yen ana).
e) Kertu SD (yen ana).
f) Kertu SIM (yen ana).
g) Kamera GMSL (yen ana).
h) Konektor GPIO 40-Pin (yen ana).
i) CAN 6-Pin Konektor (yen ana).
j) Antena kanggo WiFi/Bluetooth (yen ana).
k) Antena kanggo Seluler (yen ana). - Sambungake Kabel Daya saka +9V kanggo +36V Power Supply menyang Mini-Fit Jr.. konektor daya 4-Pin.
- Tancepake kabel AC menyang Sumber Daya lan menyang soket tembok.
AJA daya sistem dening plugging daya urip
DETAIL THERMAL
Rudi-NX nduweni Kisaran Suhu Operasi saka -20°C nganti +80°C.
Nanging, penting kanggo dicathet yen Modul NVIDIA Jetson Xavier NX nduweni sifat dhewe sing kapisah karo Rudi-NX. NVIDIA Jetson Xavier NX cocog karo Kisaran Suhu Operasi Rudi-NX saka -20°C nganti +80°C.
Tanggung jawab pelanggan mbutuhake implementasine sing tepat saka solusi termal sing njaga suhu RudiNX ing ngisor suhu sing ditemtokake (katon ing tabel ing ngisor iki) miturut beban termal maksimal lan kahanan sistem kanggo kasus panggunaan.
NVIDIA Jetson Xavier NX
| Paramèter | Nilai | Unit |
| Suhu Operasi SoC Xavier Maksimal | T.cpu = 90.5 | °C |
| T.gpu = 91.5 | °C | |
| T.aux = 90.0 | °C | |
| Suhu Mati SoC Xavier | T.cpu = 96.0 | °C |
| T.gpu = 97.0 | °C | |
| T.aux = 95.5 | °C |
Rudi-NX
| Paramèter | Nilai | Unit |
| Suhu Operasi Maksimum @70CFM970 Evo Plus 1TB Dipasang, Blok Pendingin NVMe Dipasang | T.cpu = 90.5 | °C |
| T.gpu = 90.5 | °C | |
| T.nvme = 80.0 | °C | |
| T.amb = 60.0 | °C |
DETAIL KONSUMSI SAIKI
| Paramèter | Nilai | Unit | Suhu |
| Modul NVIDIA Jetson Xavier NX, Pendinginan Pasif, Idle, HDMI, Ethernet, Mouse, lan Keyboard dipasang | 7.5 | W | 25°C (tipe) |
| Modul NVIDIA Jetson Xavier NX, Pendinginan Pasif, 15W - 6 mode inti, CPU stres, GPU stres, HDMI, Ethernet, Mouse, lan Keyboard dipasang | 22 | W | 25°C (tipe) |
DETAIL SOFTWARE / BSP
Kabeh produk adhedhasar Connect Tech NVIDIA Jetson dibangun ing Linux dipunéwahi kanggo Tegra (L4T) Piranti Tree sing khusus kanggo saben produk CTI.
WARNING: Konfigurasi hardware produk CTI beda karo kit evaluasi sing diwenehake NVIDIA. Mangga manehview dokumentasi produk lan nginstal ONLY cocok CTI L4T BSPs.
Gagal ngetutake proses iki bisa nyebabake hardware non-fungsi.
KABEL KANGGO
| Katrangan | Nomer Part | Qty |
| Kabel Input Daya | CBG408 | 1 |
| GPIO Kab | SFSD-20-28C-G-12.00-SR | 1 |
| Kabel CAN | SFSD-03-28C-G-12.00-SR | 1 |
AKSESORI
| Katrangan | Nomer Part |
| Pasokan Daya AC / DC | MSG085 |
| Quad FAKRA GMSL1/2 Kabel | CBG341 |
| Pemasangan kurung | MSG067 |
KAMERA VENDOR sing wis disetujoni
| Produsen | Katrangan | Nomer Part | Sensor gambar |
| sistem e-con | Kamera GMSL1 | NileCAM30 | AR0330 |
| Pencitraan Macan Tutul | Kamera GMSL2 | LI-IMX390-GMSL2- 060H | IMX390 |
DETAIL MEKANIKAL
Tata Cara Pembongkaran Rudi-NX
INSTRUCTIONS FOR DISASSEMBLY
Kaca-kaca ing ngisor iki nuduhake disassembly saka PANEL BASE kanggo entuk akses menyang SISTEM kanggo ngidini plug-in menyang M.2 slot .
ALL OPERASI kudu rampung ing lingkungan kontrol ESD. GELENG UTAWA TALI ESD TUTUP KUDU DIANGGO SAJEN OPERASI sing digarisake
Kabèh pengikat kudu dicopot lan dirakit manèh nganggo driver torsi sing bener
CATETAN SISTEM kudu tetep ana ing posisi iki sajrone kabeh operasi.
SISTEM kudu tetep ana ing posisi iki amarga PCB ora diikat lan mung dicekel karo konektor sing ana ing panel ngarep lan mburi.
PROSEDUR Mbongkar
Sawisé plug ing kertu M.2 dipasang ing STANDOFF Gunung A & B minangka ditampilake.
DIREKOMENDASIake nggunakake ing ngisor iki kanggo nyepetake KARTU M.2 ING GUNUNG A:
M2.5X0.45, 8.0mm LONG, PHILLIPS PAN HEAD
M2.5 LOCK WASHER (YEN ORA DIGUNA THREADLOCKER YANG COCOK kudu digunakke)
DIREKOMENDASIake nggunakake ing ngisor iki kanggo nyepetake KARTU M.2 ING GUNUNG B.
M2.5X0.45. 6.0mm LONG, PHILLIPS PAN KEPALA
M2.5 LOCK WASHER (YEN ORA DIGUNA THREADLOCKER YANG COCOK kudu digunakke)
Cepet menyang torsi saka 3.1in-lb
Tata Cara Majelis Rudi-NX
Rudi-NX Pilihan Mounting Brackets Plan View
Rudi-NX Pilihan Pemasangan Brackets Prosedur Majelis
PEDOMAN MAJLIS:
- NYOBOT KAKI KARET saka ngisor assembly.
- Ngamanake KURUNG MOUNTING SATU SISI SING KANGGO NGANGGO SEKRUP SING WIS.
- TORQUE THE FASTENERS kanggo 5.2 in-lb.
PURWAKA
Penafian
Informasi sing ana ing pandhuan pangguna iki, kalebu nanging ora winates ing spesifikasi produk, bisa diganti tanpa kabar.
Connect Tech ora tanggung jawab kanggo karusakan apa wae sing ditindakake kanthi langsung utawa ora langsung saka kesalahan teknis utawa typographical utawa ngilangi sing ana ing kene utawa kanggo bedo antarane produk lan pandhuan pangguna.
Dhukungan Pelanggan Swaraview
Yen sampeyan nemu kangelan sawise maca manual lan / utawa nggunakake produk, hubungi pengecer Connect Tech saka ngendi sampeyan tuku produk. Ing kasus paling, pengecer bisa mbantu karo instalasi produk lan kangelan.
Yen pengecer ora bisa ngrampungake masalah sampeyan, staf dhukungan sing mumpuni bisa mbantu sampeyan. bagean support kita kasedhiya 24 jam dina, 7 dina minggu ing kita websitus ing:
http://connecttech.com/support/resource-center/. Deleng bagean informasi kontak ing ngisor iki kanggo informasi luwih lengkap babagan cara langsung hubungi kita. Dhukungan teknis kita tansah gratis.
Informasi Kontak
| Informasi Kontak | |
| Kirim / Kurir | Dhukungan Teknis Connect Tech Inc. 489 Clair Rd. W. Guelph, Ontario Kanada N1L 0H7 |
| Informasi Kontak | sales@connecttech.com support@connecttech.com www.connecttech.com
Bebas Pulsa: 800-426-8979 (Mung Amerika Utara) |
|
Dhukungan |
Mangga menyang Sambungake Tech Resource Center kanggo manual produk, panuntun instalasi, driver piranti, BSP lan tips technical.
Kirim Panjenengan dhukungan teknis pitakonan kanggo engineers support kita. Perwakilan Dhukungan Teknis kasedhiya ana nganti ana, saka 8:30 kanggo 5:00. Wektu Standar Timur. |
Garansi produk winates
Connect Tech Inc. nyedhiyakake Garansi setaun kanggo produk iki. Yen produk iki, miturut pendapat Connect Tech Inc., ora bisa digunakake kanthi apik sajrone periode babar pisan, Connect Tech Inc. bakal, kanthi pilihan, ndandani utawa ngganti produk iki tanpa biaya, yen produk kasebut durung mbayar. wis ngalami penyalahgunaan, nyalahi panggunaan, kacilakan, bilai utawa non-Connect Tech Inc.. modifikasi utawa ndandani.
Sampeyan bisa entuk layanan garansi kanthi ngirim produk iki menyang mitra bisnis Connect Tech Inc. utawa Connect Tech Inc. bebarengan karo bukti tuku. Product bali menyang Connect Tech Inc.. kudu wis sah dening Connect Tech Inc karo nomer RMA (Return Material Wewenang) ditandhani ing njaba paket lan dikirim prabayar, diasuransiake lan rangkep kanggo pangiriman aman. Connect Tech Inc. bakal ngasilake produk iki kanthi layanan kiriman darat prabayar.
Garansi Terbatas Connect Tech Inc. mung sah sajrone umur produk. Iki ditetepake minangka wektu nalika kabeh komponen kasedhiya. Yen prodhuk mbuktekaken dadi irreparable, Connect Tech Inc duwe hak kanggo ngganti produk sing padha yen kasedhiya utawa mbatalake Warranty yen ora ana panggantos kasedhiya.
Garansi ndhuwur mung babar pisan sah dening Connect Tech Inc.. Ing kahanan apa Connect Tech Inc.. ora bakal tanggung jawab ing sembarang cara kanggo karusakan apa wae, kalebu bathi ilang, tabungan ilang utawa kerusakan insidental utawa consequential liyane njedhul saka nggunakake, utawa ora bisa digunakake, produk kasebut
Kabar Hak Cipta
Informasi sing ana ing dokumen iki bisa diganti tanpa kabar. Connect Tech Inc. ora bakal tanggung jawab kanggo kasalahan sing ana ing kene utawa kanggo karusakan consequential insidental ing sambungan karo furnishing, kinerja, utawa nggunakake materi iki. Dokumen iki ngemot informasi kepemilikan sing dilindhungi hak cipta. Kabeh hak dilindhungi undhang-undhang. Ora ana bagean saka dokumen iki sing bisa difotokopi, direproduksi, utawa diterjemahake menyang basa liya tanpa idin tinulis sadurunge saka Connect Tech, Inc.
Hak Cipta 2020 dening Connect Tech, Inc.
Pangenalan Merek Dagang
Connect Tech, Inc. ngakoni kabeh merek dagang, merek dagang kadhaptar lan/utawa hak cipta sing diarani ing dokumen iki minangka properti saka pihak sing nduweni. Ora nyathet kabeh merek dagang utawa hak cipta sing bisa diakoni ora dadi kekurangan pengakuan marang sing nduweni hak merek dagang lan hak cipta sing kasebut ing dokumen iki.
Dokumen / Sumber Daya
 |
Sambungake Tech Inc Rudi-NX Embedded System [pdf] Pandhuan pangguna Rudi-NX Embedded System, Rudi-NX, Embedded System, Sistem |
