Jikọọ Tech Inc Rudi-NX ntuziaka onye ọrụ agbakwunyere

Ịdọ aka ná ntị ESD 

Ngwa eletrọnịkị na sekit na-emetụta ElectroStatic Discharge (ESD). Mgbe ị na-ejizi mgbakọ bọọdụ sekit ọ bụla gụnyere mgbakọ ndị na-ebu Jikọọ Tech COM Express, a na-atụ aro ka kpachara anya maka nchekwa ESD. Omume kachasị mma nke ESD gụnyere, mana ọnweghị oke na:

• Ịhapụ bọọdụ sekit n'ime ngwugwu antistatic ha ruo mgbe ha dị njikere itinye ya.
• Iji eriri nkwojiaka gbadoro ụkwụ mgbe ị na-eji bọọdụ sekit, opekempe, ị ga-emetụ ihe igwe gbadoro ụkwụ aka ka ọ tufuo ụgwọ kwụ ọtọ nwere ike ịdị na gị.
• Naanị ijikwa bọọdụ sekit na mpaghara nchekwa ESD, nke nwere ike ịgụnye ala ESD na tebụl tebụl, ọdụ eriri aka na akwa mkpuchi ESD nchekwa.
• Izere ijikwa bọọdụ sekit na mpaghara kapeeti.
• Gbalịa ijikwa osisi site n'akụkụ, na-ezere kọntaktị na components.

AKỤKỌ NKWUO

Ndozigharị	Ụbọchị	Mgbanwe
0.00	2021-08-12	Mwepụta izizi
0.01	2020-03-11	Eserese ngọngọ agbanweela Ọnụọgụ akụkụ agbakwunyere maka ịtụ Agbakụrụ Rudi-NX N'okpuru View iji gosi M.2 Ọnọdụ
0.02	2020-04-29	Emelitere SW1 Iji Kwado/gbanyụọ CAN Nkwụsị GPIO emelitere Ihe osise eji arụ ọrụ agbakwunyere
0.02	2020-05-05	Eserese ngọngọ emelitere
0.03	2020-07-21	Nkọwa ọkụ Rudi-NX emelitere
0.04	2020-08-06	Ndebiri emelitere Nkọwa ọkụ emelitere
0.05	2020-11-26	Ọnụọgụ/ozi ịtụnye akụkụ emelitere
0.06	2021-01-22	Tebụlụ erimeri ugbu a emelitere
0.07	2021-08-22	Agbakwunyere mgbodo mgbanye nhọrọ na ngwa ngwa

Okwu mmalite

Jikọọ Tech's Rudi-NX na-eweta NVIDIA Jetson Xavier NX na-ebugharị n'ahịa. Nhazi nke Rudi-NX gụnyere ntinye ike mkpọchi (+9 ruo + 36V), Dual Gigabit Ethernet, HDMI video, 4 x USB 3.0 Ụdị A, 4 x GMSL 1/2 Igwefoto, USB 2.0 (w / OTG ọrụ), M .2 (B-Key 3042, M-Key 2280, na E-Key 2230 arụrụ ọrụ; ogwe ohere ala), 40 Pin mkpọchi GPIO njikọ, 6-Pin Mkpọchi kewapụrụ Full-Duplex CAN, batrị RTC, na a dual nzube Tọgharia/Force mgbake pushbutton na ike ikanam.

Njirimara ngwaahịa na nkọwapụta 

Njirimara	Rudi-NX
Ndakọrịta modul	NVIDIA® Jetson Xavier NX™
Akụkụ igwe	109mm x 135mm x 50mm
USB	4x USB 3.0 (njikọ: USB Ụdị-A) 1 x USB 2.0 OTG (Micro-B) 1x USB 3.0 + 2.0 Port to M.2 B-Key 1x USB 2.0 ka M.2 E-Key
Igwefoto GMSL	Ntinye igwefoto 4x GMSL 1/2 (njikọ: Quad Micro COAX) ihe nrụpụta agbakwunyere na bọọdụ ụgbọ
Netwọk	2x 10/100/1000BASE-T Uplink (1 Port from PCIe PHY Controller)
Nchekwa	1x NVMe (M.2 2280 M-KEY) 1x SD kaadị oghere
Mgbasa ikuku ikuku	1x WiFi Module (M.2 2230 E-KEY) 1x LTE Module (M.2 3042 B-KEY) w/ Njikọ Kaadị SIM
Ụdị dị iche iche. I/O	2x UART (1x Console, 1 x 1.8V) 1 x RS-485 2 x I2C 2 x SPI 2 x PWM 4x GPIO 3 x 5V 3 x 3.3V 8 x GND
IKE	1x dịpụrụ adịpụ CAN 2.0b
Batrị RTC	Ihe njide batrị CR2032
Pịa bọtịnụ	Nrụgharị Nzube Abụọ/arụ ọrụ mgbake ike
Ọnọdụ LED	Ike ọma LED
Ntinye ike	+9V ruo +36V DC Ntinye ike (Obere-Fit Jr. 4-Pin mkpọchi)

Nọmba akụkụ / Ozi ịtụ 

Nọmba akụkụ	Nkọwa	Modul arụnyere
ESG602-01	Rudi-NX w/ GMSL	Ọ dịghị
ESG602-02	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel
ESG602-03	Rudi-NX w/ GMSL	M.2 2280 NVMe – Samsung
ESG602-04	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – Samsung
ESG602-05	Rudi-NX w/ GMSL	M.2 3042 LTE-EMEA – Quectel
ESG602-06	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 3042 LTE-EMEA – Quectel
ESG602-07	Rudi-NX w/ GMSL	M.2 2280 NVMe – Samsung M.2 3042 LTE-EMEA – Quectel
ESG602-08	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – SamsungM.2 3042 LTE-EMEA – Quectel
ESG602-09	Rudi-NX w/ GMSL	M.2 3042 LTE-JP – Quectel
ESG602-10	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 3042 LTE-JP – Quectel
ESG602-11	Rudi-NX w/ GMSL	M.2 2280 NVMe – Samsung M.2 3042 LTE-JP – Quectel
ESG602-12	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – SamsungM.2 3042 LTE-JP – Quectel
ESG602-13	Rudi-NX w/ GMSL	M.2 3042 LTE-NA - Quectel
ESG602-14	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 3042 LTE-NA - Quectel
ESG602-15	Rudi-NX w/ GMSL	M.2 2280 NVMe – Samsung M.2 3042 LTE-NA - Quectel
ESG602-16	Rudi-NX w/ GMSL	M.2 2230 WiFi/BT – Intel M.2 2280 NVMe – SamsungM.2 3042 LTE-NA – Quectel

MKWUO NKEVIEW

Ihe Ngosi 

Ebe njikọ 

N'ihu VIEW 

GỌ VIEW 

N'okpuru VIEW (Ewepụrụ mkpuchi) 

Nchịkọta njikọ ime 

Onye mmebe	Njikọ	Nkọwa
P1	0353180420	+9V ruo +36V Mini-Fit Jr. 4-Pin DC Njikọ Ntinye Ike
P2	10128796-001RLF	M.2 3042 B-Key 2G/3G/LTE Njikọ Module Cellular
P3	SM3ZS067U410AER1000	M.2 2230 E-Key WiFi/Bluetooth Modul njikọ
P4	10131758-001RLF	M.2 2280 M-Key NVMe SSD Njikọ
P5	2007435-3	Njikọ vidiyo HDMI
P6	47589-0001	USB 2.0 Micro-AB OTG njikọ
P7	JXD1-2015NL	Njikọ RJ-45 Gigabit Ethernet abụọ
P8	2309413-1	NVIDIA Jetson Xavier NXModule Board-To-Board Njikọ
P9	10067847-001RLF	Njikọ kaadị SD
P10	0475530001	Njikọ kaadị SIM
P11A, B	48404-0003	Njikọ USB3.0 Ụdị-A
P12A, B	48404-0003	Njikọ USB3.0 Ụdị-A
P13	TFM-120-02-L-DH-TR	40 Pin GPIO Njikọ
P14	2304168-9	Njikọ igwefoto GMSL 1/2 Quad
P15	TFM-103-02-L-DH-TR	6 Pin dịpụrụ adịpụ CAN njikọ
BAT 1	BHSD-2032-SM	Njikọ batrị CR2032 RTC

Nchịkọta Njikọ Mpụga 

Ebe	Njikọ	Mating Part ma ọ bụ Njikọ
N'ihu	PWR IN	+9V ruo +36V Mini-Fit Jr. 4-Pin DC Njikọ Ntinye Ike
N'ihu	HDMI	Njikọ vidiyo HDMI
Azu	OTG	USB 2.0 Micro-AB OTG njikọ
Azu	GbE1, GbE2	Njikọ RJ-45 Gigabit Ethernet abụọ
N'ihu	SD Kaadị	Njikọ kaadị SD
N'ihu	Kaadị SIM	Njikọ kaadị SIM
Azu	USB 1, 2, 3, 4	Njikọ USB3.0 Ụdị-A
N'ihu	Mgbasawanye I/O	40 Pin GPIO Njikọ
N'ihu	GMSL	Njikọ igwefoto GMSL 1/2 Quad
N'ihu	IKE	6 Pin dịpụrụ adịpụ CAN njikọ
N'ihu	SYS	Tọgharịa / Kwado mgbake Pushbutton
Azu	ANT 1, 2	Antenna

Gbanwee nchịkọta 

Onye mmebe	Njikọ	Nkọwa
SW1-1 SW1-2	1571983-1	Nnwale nrụpụta naanị (nke dị n'ime) nwere ike ịkwụsị / gbanyụọ
SW2	TL1260BQRBLK	Nrụgharị ọrụ abụọ/bọtịnụ mgbake (Mpụga)
SW3	1571983-1	Nhọrọ mgbanwe DIP Maka GMSL 1 ma ọ bụ GMSL 2 (N'ime)

Nkọwapụta atụmatụ zuru ezu

Rudi-NX NVIDIA Jetson Xavier NX Module Njikọ
A na-emejuputa NVIDIA Jetson Xavier NX processor na chipset na Jetson Xavier NX Module.
Nke a na-ejikọ na NVIDIA Jetson Xavier NX na Rudi-NX site na njikọ TE Connectivity DDR4 SODIMM 260 Pin

Ọrụ	Nkọwa
Ebe	Ime na Rudi-NX
Ụdị	Modul
Pinout	Rụtụ aka na NVIDIA Jetson Xavier NX Datasheet.
Atụmatụ	Rụtụ aka na NVIDIA Jetson Xavier NX Datasheet.

Mara: A na-agbanye efere nnyefe ọkụ na NVIDIA Jetson Xavier NX modul n'ime na Rudi-NX. Okpomọkụ ga-efesa ruo n'elu chassis Rudi-NX.

Rudi-NX HDMI njikọ
NVIDIA Jetson Xavier NX modul ga-ewepụta vidiyo site na njikọ Rudi-NX vetikal HDMI nke nwere ike HDMI 2.0.

Ọrụ	Nkọwa
Ebe	N'ihu
Ụdị	Njikọ HDMI kwụ ọtọ
Njikọ Mating	HDMI Ụdị-A USB
Pinout	Rụtụ aka na ọkọlọtọ HDMI

Rudi-NX GMSL 1/2 Njikọ
Rudi-NX na-enye ohere GMSL 1 ma ọ bụ GMSL 2 site na njikọ Quad MATE-AX. GMSL na MIPI Deserializers na-agbakwunyere na bọọdụ ụgbọelu nke na-eji vidiyo MIPI 4-Lane kwa igwefoto 2.
Na mgbakwunye, Rudi-NX na-ewepụta + 12V Power Over COAX (POC) na ikike 2A dị ugbu a (500mA kwa igwefoto).

Ọrụ		Nkọwa
Ebe		N'ihu
Ụdị		GMSL 1/2 Njikọ igwefoto
Cable mating		Quad Fakra GMSL Cable4 Ọnọdụ MATE-AX ruo 4 x FAKRA Z-koodu 50Ω RG174 CTI P/N: CBG341
Ntụtụ	MIPI-ụzọ	Nkọwa
1	CSI 2/3	GMSL 1/2 Njikọ igwefoto
2	CSI 2/3	GMSL 1/2 Njikọ igwefoto
3	CSI 0/1	GMSL 1/2 Njikọ igwefoto
4	CSI 0/1	GMSL 1/2 Njikọ igwefoto

Rudi-NX USB 3.0 Njikọ Ụdị-A
Rudi-NX na-agụnye njikọ USB 4 ụdị-A 3.0 kwụ ọtọ nwere oke 2A ugbu a maka njikọ ọ bụla. Ọdụ ụgbọ mmiri ụdị USB 3.0 niile nwere ike 5Gbps.

Ọrụ	Nkọwa
Ebe	N'azụ
Ụdị	Njikọ USB Ụdị-A
Njikọ Mating	USB Ụdị-A USB
Pinout	Rụtụ aka na ọkọlọtọ USB

Rudi-NX 10/100/1000 Njikọ Ethernet abụọ
Rudi-NX na-arụ ọrụ njikọ ethernet 2 x RJ-45 maka nkwukọrịta ịntanetị. Ejikọtara njikọ A ozugbo na modul NVIDIA Jetson Xavier NX. Ejikọtara njikọ B site na PCIe Gigabit Ethernet PHY na mgba ọkụ PCIe.

Ọrụ	Nkọwa
Ebe	N'azụ
Ụdị	RJ-45 njikọ
Njikọ Mating	RJ-45 Ethernet USB
Pinout	Rụtụ aka na ọkọlọtọ Ethernet

Rudi-NX USB 2.0 OTG/njikọ ọnọdụ ọnọdụ
Rudi-NX na-arụ ọrụ njikọ USB2.0 Micro-AB iji kwe ka ọnọdụ nnabata banye na modul ma ọ bụ OTG na-egbuke egbuke nke modul.

Ọrụ	Nkọwa
Ebe	N'azụ
Ụdị	Njikọ USB Micro-AB
Njikọ Mating	USB 2.0 Micro-B ma ọ bụ Micro-AB USB
Pinout	Rụtụ aka na ọkọlọtọ USB

Rịba ama 1: Achọrọ eriri USB Micro-B maka OTG Flashing.
Rịba ama 2: Achọrọ eriri USB Micro-A maka ọnọdụ nnabata.

Rudi-NX SD kaadị njikọ
Rudi-NX na-arụ ọrụ njikọ kaadị SD zuru oke.

Ọrụ	Nkọwa
Ebe	N'ihu
Ụdị	Njikọ kaadị SD
Pinout	Rụtụ aka na ọkọlọtọ kaadị SD

Rudi-NX GPIO njikọ
Rudi-NX na-arụ ọrụ Samtec TFM-120-02-L-DH-TR Njikọ iji nye ohere maka njikwa ndị ọzọ. 3 x Ike (+5V, +3.3V), 9 x Ground, 4 x GPIO (GPIO09, GPIO10, GPIO11, GPIO12), 2 x PWM (GPIO13, GPIO14), 2 x I2C (I2C0, I2C1), 2 x SPI (SPI0, SPI1), 1 x UART (3.3V, Console), na RS485 interface.

Ọrụ		Nkọwa
Ebe		N'ihu
Ụdị		Njikọ Mgbasawanye GPIO
Njikọ ụgbọelu		TFM-120-02-L-DH-TR
Cable mating		SFSD-20-28C-G-12.00-SR
Pinout	Agba	Nkọwa	Ụdị I/O
1	Agba aja aja	+5V	Ike
2	Uhie	SPI0_MOSI (3.3V kacha.)	O
3	oroma	SPI0_MISO (3.3V kacha.)	I
4	Odo	SPI0_SCK (3.3V kacha.)	O
5	Akwụkwọ ndụ akwụkwọ ndụ	SPI0_CS0# (3.3V kacha.)	O
6	Violet	+3.3V	Ike
7	Agba ntụ	GND	Ike
8	Ọcha	SPI1_MOSI (3.3V kacha.)	O
9	Nwa	SPI1_MISO (3.3V kacha.)	I
10	Acha anụnụ anụnụ	SPI1_SCK (3.3V kacha.)	O
11	Agba aja aja	SPI1_CS0# (3.3V kacha.)	O
12	Uhie	GND	Ike
13	oroma	UART2_TX (3.3V kacha.,Console)	O
14	Odo	UART2_RX (3.3V kacha.,Console)	I
15	Akwụkwọ ndụ akwụkwọ ndụ	GND	Ike
16	Violet	I2C0_SCL (3.3V kacha.)	I/O
17	Agba ntụ	I2C0_SDA (3.3V kacha.)	I/O
18	Ọcha	GND	Ike
19	Nwa	I2C2_SCL (3.3V kacha.)	I/O
20	Acha anụnụ anụnụ	I2C2_SDA (3.3V kacha.)	I/O
21	Agba aja aja	GND	Ike
22	Uhie	GPIO09 (3.3VMax.)	O
23	oroma	GPIO10 (3.3VMax.)	O
24	Odo	GPIO11 (3.3VMax.)	I
25	Akwụkwọ ndụ akwụkwọ ndụ	GPIO12 (3.3VMax.)	I
26	Violet	GND	Ike
27	Agba ntụ	GPIO13 (PWM1, 3.3VMax.)	O
28	Ọcha	GPIO14 (PWM2, 3.3VMax.)	O
29	Nwa	GND	Ike
30	Acha anụnụ anụnụ	RXD+ (RS485)	I
31	Agba aja aja	RXD- (RS485)	I
32	Uhie	TXD+ (RS485)	O
33	oroma	TXD- (RS485)	O
34	Odo	RTS (RS485)	O
35	Akwụkwọ ndụ akwụkwọ ndụ	+5V	Ike
36	Violet	UART1_TX (3.3V kacha.)	O
37	Agba ntụ	UART1_RX (3.3V kacha.)	I
38	Ọcha	+3.3V	Ike
39	Nwa	GND	Ike
40	Acha anụnụ anụnụ	GND	Ike

Rudi-NX dịpụrụ adịpụ CAN njikọ
Rudi-NX na-arụ ọrụ Samtec TFM-103-02-L-DH-TR Connector iji kwe ka CAN dịpụrụ adịpụ na njedebe 120Ω wuru. 1 x Ike dịpụrụ adịpụ (+5V), 1 x CANH dịpụrụ adịpụ, 1 x CANL dịpụrụ adịpụ, 3 x Ala dịpụrụ adịpụ.

Ọrụ		Nkọwa
Ebe		N'ihu
Ụdị		Njikọ CAN dịpụrụ adịpụ
Njikọ ụgbọelu		TFM-103-02-L-DH-TR
Cable mating		SFSD-03-28C-G-12.00-SR
Pinout	Agba	Nkọwa
1	Agba aja aja	GND
2	Uhie	+5V dịpụrụ adịpụ
3	oroma	GND
4	Odo	Ike
5	Akwụkwọ ndụ akwụkwọ ndụ	GND
6	Violet	KWURU

Mara: Nkwụsị 120Ω arụnyere n'ime ya nwere ike wepu ya site na arịrịọ ndị ahịa. Biko kpọtụrụ Connect Tech Inc. maka nkọwa ndị ọzọ.

Tọgharia Rudi-NX & Ike mgbake Pushbutton
Rudi-NX na-arụ ọrụ pushbutton arụ ọrụ abụọ maka Tọgharia na Iweghachite nke ikpo okwu. Iji tọgharịa modul, naanị pịa ma jide bọtịnụ push maka opekempe 250 milliseconds. Iji tinye modul Jetson Xavier NX n'ime ọnọdụ mgbake Force, pịa ma jide bọtịnụ push maka opekempe nke 10 sekọnd.

Ọrụ	Nkọwa
Ebe	N'azụ
Ụdị	Pịa bọtịnụ
Tọgharịa bọtịnụ Pịa	Opekempe 250ms (ụdị.)
Pịa bọtịnụ mgbake	Opekempe 10s (ụdị.)

Rudi-NX Njikọ ike
Rudi-NX na-arụ ọrụ Njikọ Ike Obere-Fit Jr. 4-Pin nke na-anabata ike + 9V ruo + 36V DC.

Ọrụ	Nkọwa
Ebe	N'ihu
Ụdị	Njikọ Obere-Fit Jr. 4-Pin
Ntinye kacha nta Voltage	+ 9V DC
Oke Ntinye Voltage	+ 36V DC
CTI Mating Cable	CTI PN: CBG408

Mara: A chọrọ ikenye ike nke nwere 100W ma ọ bụ karịa iji rụọ ọrụ Rudi-NX na mpaghara niile na-agba ọsọ na ọkwa kachasị elu ha.

Rudi-NX GMSL 1/2 DIP Nhọrọ Nhọrọ
Rudi-NX na-arụ ọrụ 2 ọnọdụ DIP maka nhọrọ nke GMSL 1 ma ọ bụ GMSL 2.

Ọrụ	Nkọwa	SW3 akuku akaekpe (N'AKWỤKWỌ) SW3-2 SW3-1 akuku aka nri (gbanyụọ)  SW3-2 SW3-1
Ebe	Ime na Rudi-NX
Ụdị	DIP Gbanye
SW3-1 - Gbanyụọ SW3-2 - Gbanyụọ	GMSL1 Ọnọdụ mgbochi dị elu - GBANYE
SW3-1 - NA SW3-2 - Gbanyụọ	GMSL23 Gbps
SW3-1 - Gbanyụọ SW3-2 - GBANYE	GMSL26 Gbps
SW3-1 - NA SW3-2 - GBANYE	GMSL1 Ọnọdụ mgbochi dị elu – Gbanyụọ

Rudi-NX nwere ike ịkwụsị / gbanyụọ nhọrọ mgbanwe DIP
Rudi-NX na-arụ ọrụ n'ime ọnọdụ 2 DIP maka ime ma ọ bụ gbanyụọ CAN nkwụsị nkwụsị nke 120Ω.

Ọrụ	Nkọwa
Ebe	Ime na Rudi-NX
Ụdị	DIP Gbanye
SW1-1 - Gbanyụọ SW1-2 - Gbanyụọ	Nnwale nrụpụta naanị Enwere ike gbanyụọ nkwụsị
SW1-1 - GBANYE SW1-2 - GBANYE	Nnwale nrụpụta naanị Kwee ike ịkwụsị

Mara: Enwere ike ịkwụsị site na ndabara mgbe ebugara ndị ahịa.
Biko kpọtụrụ Connect Tech Inc. ma ọ bụrụ na ị ga-achọ ịtọ nkwụsị ahụ ka a kwadoro tupu ebupu ya.

Rudi-NX Njikọ Antenna
Chassis Rudi-NX na-arụ ọrụ 4x SMA Antenna Connectors (Nhọrọ) maka ime M.2 2230 E-Key (WiFi/Bluetooth) na M.2 3042 B-Key (Cellular).

Ọrụ	Nkọwa
Ebe	Ihu na azụ
Ụdị	SMA njikọ
Njikọ Mating	Mpi njikọ

Nwụnye ụdị

1. Gbaa mbọ hụ na agbanyụrụ sistemu ọkụ dị n'èzí wee kepu ya.
2. Wụnye eriri ndị dị mkpa maka ngwa gị. Opekempe ndị a ga-agụnye:
   a) Igwe ọkụ na njikọ ike ntinye.
   b) eriri Ethernet n'ime ọdụ ụgbọ mmiri ya (ọ bụrụ na ọdabara).
   c) Igwe ihe ngosi vidiyo HDMI (ọ bụrụ na ọdabara).
   d) Ahụigodo, òké, wdg site na USB (ọ bụrụ na ọdabara).
   e) Kaadị SD (ọ bụrụ na ọdabara).
   f) Kaadị SIM (ọ bụrụ na ọdabara).
   g) Igwefoto GMSL (ọ bụrụ na ọdabara).
   h) GPIO 40-Pin Njikọ (ọ bụrụ na ọdabara).
   i) CAN 6-Pin Njikọ (ọ bụrụ na ọdabara).
   j) Antennas maka WiFi/Bluetooth (ọ bụrụ na ọdabara).
   k) Antennas maka Cellular (ọ bụrụ na ọdabara).
3. Jikọọ eriri ọkụ nke + 9V na + 36V Power Supply n'ime Mini-Fit Jr. 4-Pin ike njikọ.
4. Tinye eriri AC n'ime ọkụ ọkụ yana n'ime oghere mgbidi.
   AKWỤKWỌ usoro gị ike site na ịtinye ọkụ dị ndụ

Nkọwa okpomọkụ

Rudi-NX nwere oke okpomoku na-arụ ọrụ nke -20°C ruo +80°C. 

Otú ọ dị, ọ dị mkpa iburu n'obi na NVIDIA Jetson Xavier NX Module nwere ihe onwunwe ya dị iche iche na nke Rudi-NX. NVIDIA Jetson Xavier NX dakọtara na Rudi-NX Okpomọkụ Na-arụ ọrụ nke -20°C ruo +80°C.

Ọrụ ndị ahịa chọrọ mmezu nke ọma nke ngwọta okpomọkụ nke na-edobe okpomọkụ RudiNX n'okpuru ọnọdụ okpomọkụ a kapịrị ọnụ (gosipụtara na tebụl dị n'okpuru ebe a) n'okpuru oke okpomọkụ na ọnọdụ usoro maka ojiji ha.

NVIDIA Jetson Xavier NX 

Oke	Uru	Nkeji
Okpomọkụ arụ ọrụ Xavier SoC kacha	T.cpu = 90.5	Celsius C
	T.gpu = 91.5	Celsius C
	T.aux = 90.0	Celsius C
Xavier SoC nkwụsị okpomọkụ	T.cpu = 96.0	Celsius C
	T.gpu = 97.0	Celsius C
	T.aux = 95.5	Celsius C

Rudi-NX 

Oke	Uru	Nkeji
Okpomọkụ arụ ọrụ kacha elu @70CFM970 Evo Plus 1TB arụnyere, NVMe Ngwọta jụrụ oyi.	T.cpu = 90.5	Celsius C
	T.gpu = 90.5	Celsius C
	T.nvme = 80.0	Celsius C
	T.amb = 60.0	Celsius C

Nkọwa ihe oriri dị ugbu a

Oke	Uru	Nkeji	Okpomọkụ
NVIDIA Jetson Xavier NX Module, Passive Cooling, Idle, HDMI, Ethernet, Mouse, na Keyboard.	7.5	W	25°C (ụdị.)
NVIDIA Jetson Xavier NX Module, Passive Cooling, 15W - 6 isi ọnọdụ, CPU mesiri ike, GPU mesiri ike, HDMI, Ethernet, òké, na kiiboodu tinye n'ime ya.	22	W	25°C (ụdị.)

SOFTWARE / BSP nkọwa

All Connect Tech NVIDIA Jetson dabeere ngwaahịa na-ewu n'elu Linux gbanwetụrụ maka Tegra (L4T) Device Tree nke bụ kpọmkwem ngwaahịa CTI ọ bụla.

Ịdọ aka ná ntị: Nhazi ngwaike nke ngwaahịa CTI dị iche na nke ngwa nyocha nke NVIDIA wetara. Biko review akwụkwọ ngwaahịa ma wụnye naanị CTI L4T BSP kwesịrị ekwesị.
Ọdịda ịgbaso usoro a nwere ike ibute ngwaike anaghị arụ ọrụ.

CABLES gụnyere

Nkọwa	Nọmba akụkụ	Qty
Igwe ntinye ike	CBG408	1
GPIO USB	SFSD-20-28C-G-12.00-SR	1
Enwere ike eriri	SFSD-03-28C-G-12.00-SR	1

Ngwa ngwa

Nkọwa	Nọmba akụkụ
Ike ọkọnọ AC/DC	MSG085
Quad FAKRA GMSL1/2 USB	CBG341
Ihe nkwado nkwado	MSG067

Igwefoto ndị na-ere ahịa akwadoro

Onye nrụpụta	Nkọwa	Nọmba akụkụ	Ihe mmetụta onyonyo
e-con Systems	Igwefoto GMSL1	NileCAM30	AR0330
Ihe onyonyo agụ owuru	Igwefoto GMSL2	LI-IMX390-GMSL2- 060H	IMX390

Nkọwa ngwaọrụ

Usoro mkposa Rudi-NX 

NDỤMỌDỤ NDỊ KWESỊRỊA

Peeji ndị a na-egosi na-egosi mwepu nke BASE panel iji nweta ohere n'ime usoro iji kwe ka nkwụnye-INS n'ime M.2 oghere.

A ghaghị imecha ọrụ niile na gburugburu ESD na-achịkwa. A ga-eyiri eriri aka ma ọ bụ ikiri ụkwụ ESD n'oge ọrụ ọ bụla edepụtara.

Ndị niile na-ebu ngwa ngwa ka a ga-ewepụ ma chịkọtakwa ya n'iji ndị ọkwọ ụgbọ ala kwesịrị ekwesị.

IHE Usoro a ga-anọrịrị n'ọnọdụ a n'oge ọrụ niile.

Usoro ga-anọgide na-a ọnọdụ ebe ọ bụ na PCB na-adịghị ngwa ngwa na naanị na-ejide na ebe njikọ ndị na-aga site n'ihu na azụ panels.

Usoro mkposa

MGBE ỊKWESỊRỊ NA KAadị M.2 A NA-EKWỤKWỌ N'elu Ugwu A & B dị ka egosiri.
AKWỤRỤRỤ KA NDỊ NA-AKWỤKWỌ NDỊ NA-AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊRỊRỊNỊNỊ N'ELU A:
M2.5X0.45, 8.0mm ogologo, PHILLIPS PAN isi
M2.5 Mkpọchi washer (Ọ bụrụ na ejighi ya kwesịrị ekwesị stringlocker ga-eji)
A na-atụ aro ka iji ihe ndị a iji mee ka kaadị m.2 na Ugwu B
M2.5X0.45. 6.0mm ogologo, PHILLIPS PAN isi
M2.5 Mkpọchi washer (Ọ bụrụ na ejighi ya kwesịrị ekwesị stringlocker ga-eji)
GỤKWUO GBASARA YA N'OGE 3.1in-lb

Usoro Mgbakọ Rudi-NX 

Rudi-NX Atụmatụ mgbakwasa braket nhọrọ View 

Usoro Mgbakọ Mgbakwụnye Rudi-NX Nhọrọ

Ntụziaka ọgbakọ:

1. Wepụ Ụkwụ RUBBER n'ala ala ọgbakọ.
2. Chekwaa mgbanaka mgbago n'otu akụkụ n'otu oge na-eji screws dị ugbu a.
3. Tụgharịa ndị na-agba ọsọ na 5.2 in-lb.

MMADỤ

Nkwuputa
Ozi dị n'ime ntuziaka onye ọrụ a, gụnyere mana ọnweghị oke na nkọwapụta ngwaahịa ọ bụla, enwere ike ịgbanwe na-enweghị ọkwa.

Connect Tech anaghị ewere ụgwọ ọ bụla maka mmebi ọ bụla mebiri ozugbo ma ọ bụ na-apụtaghị ìhè site na mperi teknụzụ ma ọ bụ ederede ọ bụla dị n'ime ebe a ma ọ bụ maka nghọtahie dị n'etiti ngwaahịa na ntuziaka onye ọrụ.

Nkwado ndị ahịa gafereview
Ọ bụrụ na ị nweta ihe isi ike mgbe ịgụchara akwụkwọ ntuziaka na/ma ọ bụ iji ngwaahịa a, kpọtụrụ onye na-ere ere Jikọọ nke ị zụtara ngwaahịa a. N'ọtụtụ oge, onye na-ere ere nwere ike inyere gị aka na ntinye ngwaahịa na ihe isi ike.

Ọ bụrụ na onye reseller enweghị ike idozi nsogbu gị, ndị ọrụ nkwado anyị tozuru oke nwere ike inyere gị aka. Ngalaba nkwado anyị dị awa 24 kwa ụbọchị, ụbọchị asaa n'izu na anyị websaịtị na:
http://connecttech.com/support/resource-center/. Lee ngalaba ozi kọntaktị n'okpuru maka ozi ndị ọzọ gbasara otu esi akpọtụrụ anyị ozugbo. Nkwado nka na ụzụ anyị na-abụkarị n'efu.

Ozi mkpọtụrụ 

Ozi mkpọtụrụ
Ozi/Ozi ozi	Jikọọ Tech Inc. Nkwado nka na ụzụ 489 Clair Rd. W. Guelph, Ontario Canada N1L 0H7
Ozi mkpọtụrụ	sales@connecttech.com support@connecttech.com www.connecttech.com Ọnụ ego efu: 800-426-8979 (North America naanị) Ekwentị: +1-519-836-1291 Facsimile: 519-836-4878 (N'ịntanetị maka awa 24)
Nkwado	Biko gaa na Jikọọ Ogige akụrụngwa teknụzụ maka akwụkwọ ntuziaka ngwaahịa, ntuziaka nrụnye, ndị ọkwọ ụgbọala ngwaọrụ, BSP na ndụmọdụ teknụzụ. Nyefee gị nkwado ndị teknuzu ajụjụ nye ndị injinia nkwado anyị. Ndị nnọchi anya nka na ụzụ dị na Mọnde ruo Fraịde, site na 8:30 ụtụtụ ruo 5:00 mgbede. Oge Ọwụwa Anyanwụ Ọwụwa Anyanwụ.

Akwụkwọ ikike ngwaahịa nwere oke 

Jikọọ Tech Inc. na-enye akwụkwọ ikike otu afọ maka ngwaahịa a. Ọ bụrụ na ngwaahịa a, n'uche Connect Tech Inc., agaghị arụ ọrụ nke ọma n'oge akwụkwọ ikike, Connect Tech Inc. ga-, na nhọrọ ya, rụkwaa ma ọ bụ dochie ngwaahịa a n'akwụghị ụgwọ, ma ọ bụrụhaala na ngwaahịa ahụ enweghị. emegbula ya, iji mebie, ihe mberede, ọdachi ma ọ bụ enweghị njikọ Tech Inc. mgbanwe ma ọ bụ nrụzi ikike.

Ị nwere ike nweta ọrụ akwụkwọ ikike site na ibuga ngwaahịa a n'aka onye mmekọ azụmahịa Jikọọ Tech Inc. ikike ma ọ bụ jikọọ Tech Inc. yana akaebe nke ịzụrụ. Ngwaahịa eweghachitere na Jikọọ Tech Inc. ga-enwerịrị ikike nke Jikọọ Tech Inc. jiri akara RMA (Ikike Ihe Nlaghachi) nke akara n'èzí ngwugwu wee ziga ugwo ugwo, mkpuchi na ngwugwu maka mbupu nchekwa. Jikọọ Tech Inc. ga-eweghachi ngwaahịa a site na ọrụ mbupu ala akwụgoro ụgwọ.

Akwụkwọ ikike Connect Tech Inc. Limited bara uru naanị maka ndụ ngwaahịa a nwere ike ịrụ ọrụ. A kọwara nke a dị ka oge nke akụrụngwa niile dị. Ọ bụrụ na ngwaahịa a bụ ihe a na-apụghị ịgbagha agbagha, Jikọọ Tech Inc. nwere ikike iji dochie ngwaahịa dakọtara ma ọ bụrụ na ọ dị ma ọ bụ weghachi akwụkwọ ikike ma ọ bụrụ na enweghị nnọchi dị.

Akwụkwọ ikike a dị n'elu bụ naanị akwụkwọ ikike nke Jikọọ Tech Inc. N'ọnọdụ ọ bụla Jikọọ Tech Inc. ga-akwụ ụgwọ n'ụzọ ọ bụla maka mmebi ọ bụla, gụnyere uru ọ bụla furu efu, ego furu efu ma ọ bụ mmebi ndị ọzọ na-akpata ma ọ bụ na-akpata site na iji. ma ọ bụ enweghị ike iji, ụdị ngwaahịa a

ọkwa nwebiisinka 

Ozi dị n'ime akwụkwọ a ga-agbanwe n'enweghị ọkwa. Connect Tech Inc. agaghị akwụ ụgwọ maka mperi dị n'ime ebe a ma ọ bụ maka mmebi mberede na-akpata n'ihe gbasara ngwa ngwa, arụmọrụ, ma ọ bụ ojiji nke ihe a. Akwụkwọ a nwere ozi nwebiisinka nke ikike nwebiisinka chedoro. Edebere ikike niile. Ọ nweghị akụkụ nke akwụkwọ a nwere ike ịdepụta, megharịa, ma ọ bụ tụgharịa n'asụsụ ọzọ na-enweghị nkwenye ederede mbụ nke Connect Tech, Inc.

Nwebiisinka  2020 site na Connect Tech, Inc.

Nkwenye akara ụghalaahịa

Connect Tech, Inc. na-anabata ụghalaahịa niile, ụghalaahịa edenyere n'akwụkwọ ikikere na/ma ọ bụ nwebiisinka e zoro aka na ya n'akwụkwọ a dị ka ihe onwunwe nke ndị nwe ha. Edepụtaghị ụghalaahịa niile enwere ike ma ọ bụ nnabata nwebiisinka anaghị abụ enweghị nnabata n'aka ndị nwe ikikere ụghalaahịa na nwebiisinka a kpọtụrụ aha n'akwụkwọ a.

Akwụkwọ / akụrụngwa

Jikọọ Tech Inc Rudi-NX Sistemụ agbakwunyere [pdf] Ntuziaka onye ọrụ Sistemụ agbakwunyere Rudi-NX, Rudi-NX, Sistemụ agbakwunyere, Sistemụ

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ