Labkotec LC442-12 Labcom 442 Sashin Sadarwa
Fage
An tsara sashin sadarwa na Labcom 442 don kulawa da nesa na ma'auni a cikin aikace-aikacen kula da masana'antu, gida da muhalli. Aikace-aikace na yau da kullun sun haɗa da ƙararrawar mai raba mai, ma'aunin matakin tanki, sa ido kan tashoshin famfo da ƙasa, da ma'aunin ruwa da ƙasa.
LabkoNet® sabis Akwai akan kwamfutarka, kwamfutar hannu da wayar hannu.
Saƙonnin rubutu Ana aika bayanan aunawa da ƙararrawa kai tsaye zuwa wayarka ta hannu. Sarrafa da saita na'urar.
Hoto na 1: Haɗin Labcom 442 zuwa tsarin daban-daban
Na'urar tana aika ƙararrawa da sakamakon auna azaman saƙonnin rubutu ko dai kai tsaye zuwa wayar hannu ko zuwa sabis na LabkoNet don adanawa da rarrabawa ga sauran masu sha'awar. Kuna iya sauya saitunan na'urar cikin sauƙi tare da wayar hannu ko ta amfani da sabis na LabkoNet.
Ana samun sashin sadarwa na Labcom 442 a cikin nau'i biyu tare da nau'ikan wadata daban-dabantage. Don ci gaba da aunawa, kuma gabaɗaya lokacin da ake samun wutar lantarki ta dindindin, zaɓi na halitta don wadatar voltage 230 VAC. Hakanan ana samun na'urar tare da ajiyar baturi idan kuna da ikotage.
Sauran sigar tana aiki akan 12 VDC wadata voltage kuma an tsara shi don aikace-aikace ciki har da ma'aunin saman da ruwan ƙasa, inda voltage ya fito daga baturi. Ana iya sanya na'urar a cikin yanayin da ke amfani da wutar lantarki kaɗan, wanda zai ba da damar ko da ƙaramin baturi ya daɗe har tsawon shekara guda. Amfanin wutar lantarki ya dogara da saita aunawa da tazarar watsawa. Labkotec yana kuma bayar da Labcom 442 Solar don sabis na wutar lantarki. Wannan shigarwa da jagorar mai amfani sun haɗa da umarni don shigarwa, farawa da amfani da sigar 12 VDC.
Gabaɗaya bayanai game da littafin
Wannan jagorar wani bangare ne na samfurin.
- Da fatan za a karanta littafin jagora kafin amfani da samfurin.
- Ajiye littafin jagora na tsawon tsawon rayuwar samfurin.
- Bayar da littafin jagora ga mai shi ko mai amfani na samfurin na gaba.
- Da fatan za a ba da rahoton duk wasu kurakurai ko bambance-bambance masu alaƙa da wannan littafin kafin ƙaddamar da na'urar.
Daidaituwar samfurin
- Sanarwa ta EU da ƙayyadaddun fasaha na samfurin sassan sassan wannan takaddar.
- Dukkanin samfuranmu an tsara su kuma ƙera su tare da la'akari da mahimman ƙa'idodi, ƙa'idodi da ƙa'idodi na Turai.
- Labkotec Oy yana da ingantaccen tsarin kula da ingancin ingancin ISO 9001 da kuma tsarin kula da muhalli na ISO 14001.
Alamomin Amfani
- Alamomi da Alamomi masu alaƙa da aminci
- Alamun Bayani
Iyakar abin alhaki
- Saboda ci gaba da haɓaka samfur, muna tanadin haƙƙin canza waɗannan umarnin aiki.
- Ba za a iya ɗaukar mai sana'anta alhakin lalacewa kai tsaye ko kai tsaye ba ta hanyar yin watsi da umarnin da aka bayar a cikin wannan jagorar ko umarni, ƙa'idodi, dokoki da ƙa'idodi game da wurin shigarwa.
- Haƙƙin mallaka na wannan littafin na Labkotec Oy.
Tsaro da muhalli
Gabaɗaya umarnin aminci
- Mai shukar yana da alhakin tsarawa, shigarwa, ƙaddamarwa, aiki, kulawa da rarrabawa a wurin.
- Ƙwararren ƙwararren ƙwararren mai horarwa ne kawai zai iya yin shigarwa da ƙaddamar da na'urar.
- Ba a tabbatar da kariyar ma'aikatan aiki da tsarin ba idan ba a yi amfani da samfurin daidai da manufar sa ba.
- Dole ne a kiyaye dokoki da ƙa'idodin da suka shafi amfani ko manufar da aka nufa. An amince da na'urar don manufar amfani kawai. Yin watsi da waɗannan umarnin zai ɓata kowane garanti kuma ya kawar da masana'anta daga kowane abin alhaki.
- Dole ne a gudanar da duk aikin shigarwa ba tare da voltage.
- Dole ne a yi amfani da kayan aikin da suka dace da kayan kariya yayin shigarwa.
- Dole ne a yi la'akari da wasu haɗari a wurin shigarwa kamar yadda ya dace.
Sanarwa Hukumar Sadarwa ta Tarayya
Wannan na'urar tana aiki da Sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama da zai haifar da aikin da ba'a so. An gwada wannan kayan aikin kuma an gano sun bi ƙa'idodi don na'urar dijital Class B, bisa ga Sashe na 15 na Dokokin FCC. Waɗannan iyakokin an tsara su ne don samar da kyakkyawan kariya daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aikin yana haifar, amfani kuma zai iya haskaka kuzarin mitar rediyo kuma, idan ba'a shigar dashi kuma anyi amfani dashi daidai da umarnin, na iya haifar da cutarwa mai cutarwa ga sadarwa ta rediyo. Koyaya, babu tabbacin cewa tsangwama ba zai faru a cikin takamaiman girkawa ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga rediyo ko karɓar talabijin, wanda za'a iya tantance shi ta hanyar kunnawa da kunnawa, ana ƙarfafa mai amfani da ƙoƙarin gyara tsangwama ta ɗayan matakan masu zuwa:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
FCC Tsanaki:
- Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa wannan kayan aikin.
- Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
Bayanin ISED:
Wannan samfurin ya haɗu da innovation, Kimiyya da Ci gaban Tattalin Arziki ƙayyadaddun fasaha na Kanada.
Kulawa
Ba dole ba ne a tsaftace na'urar da ruwan caustic. Na'urar ba ta da kulawa. Koyaya, don keɓe cikakken aiki na cikakken tsarin ƙararrawa, duba aikin aƙalla sau ɗaya a shekara.
Sufuri da ajiya
- Bincika marufi da abun ciki don kowane lalacewa mai yuwuwa.
- Tabbatar cewa kun karɓi duk samfuran da aka oda kuma sun kasance kamar yadda aka yi niyya.
- Ajiye kunshin asali. Koyaushe adana da jigilar na'urar a cikin ainihin marufi.
- Ajiye na'urar a wuri mai tsabta da bushewa. Kula da yanayin ma'ajiya da aka halatta. Idan ba a gabatar da yanayin yanayin ajiya daban ba, samfuran dole ne a adana su a cikin yanayin da ke cikin kewayon zafin aiki.
Shigarwa dangane da amintattun da'irori
An ba da izinin shigar da da'irar wutar lantarki mai mahimmanci na na'urori a cikin yankuna masu fashewa, ta yadda, musamman, dole ne a ba da garantin amintaccen rabuwa da duk hanyoyin wutar lantarki marasa aminci. Dole ne a shigar da da'irori masu aminci na yanzu bisa ingantattun ƙa'idodin saitin. Idan an haɗa haɗin na'urorin filin amintattu na ciki da da'irar wutar lantarki mai aminci na na'urorin da ke da alaƙa, dole ne a kiyaye matsakaicin ƙimar na'urar filin da na'urar da ke da alaƙa dangane da kariyar fashewa (tabbacin aminci na ciki). TS EN 60079-14 / IEC 60079-14 dole ne a kiyaye shi.
Gyara
Ba za a iya gyara ko gyara na'urar ba tare da izinin masana'anta ba. Idan na'urar ta nuna kuskure, dole ne a kai ta ga masana'anta kuma a maye gurbinta da sabuwar na'ura ko wacce masana'anta ta gyara.
Rushewa da zubarwa
Dole ne a soke na'urar kuma a zubar da ita bisa bin dokokin gida da ƙa'idoji.
Shigarwa
Tsari da Sanya Wurin Na'urar
- Katangar na'urar Labcom 442 tana da bango. Ramukan hawansa suna kan farantinsa na baya a ƙarƙashin ramukan hawan murfin.
- Ciyarwar wutar lantarki da masu haɗin kai tsaye suna ƙarƙashin murfin kariya, wanda dole ne a cire shi na tsawon lokacin aikin haɗin kuma a sake shigar da shi bayan an haɗa duk igiyoyi. An raba tashoshi don haɗin waje ta ɓangarorin, waɗanda dole ne a cire su.
- Ya kamata a ƙara rufe murfin yadi don haka gefunansa su hadu da farantin baya. Matsayin kariya na shinge shine IP65. Duk wani ƙarin ta ramuka dole ne a toshe kafin a fara amfani da na'urar.
- Na'urar ta ƙunshi mai watsa rediyo.
- Dole ne a kiyaye mafi ƙarancin nisa na 0.5 cm tsakanin jikin mai amfani da na'urar, gami da eriya yayin aikin sawa na jiki don biyan buƙatun bayyanar RF a Turai.
- SAMU VOLTAGSaukewa: E12VDC
Yana haɗi zuwa + da -tasha na na'urar. - FUSE 1 AT
- SAURARA 1
- 5 = canja wurin lamba
- 6 = al'ada-bude lamba
- 7 = lamba-rufe kullum
- SAURARA 2
- 8 = canja wurin lamba
- 9 = al'ada-bude lamba
- 10 = kullum-rufe
- MAGANAR DIGITAL, x4 tashoshi 11...18
- MAGANAR ANALOG, x4 tashoshi 19...30
- ZABIN AUNA TEMPERA
An zaɓi ma'aunin zafin jiki ta jumper S300, wanda aka saita zuwa '2-3'. Haɗa ma'aunin zafin jiki zuwa shigarwar analog 4. - Mai haɗa hasken rana
- Shigar dijital 3
- firikwensin aiki
- Auna zafin jiki
- Mai kula da caji don sashin hasken rana (na zaɓi) Girman shigarwa 160 mm x 110 mm
Haɗa Sensors
Hoto na 3: Haɗa na'urori masu auna firikwensin
Labcom 442 yana da abubuwan shigar analog guda huɗu zuwa 4 zuwa 20. A wadata voltage na kusan 24 VDC (+Us) yana samuwa daga na'urar don masu watsa wayoyi biyu masu wucewa (wuce. 2W). Rashin shigar da tashoshi 1 zuwa 3 shine 130 zuwa 180 Ω da na tashar 4 150 zuwa 200 Ω.
Haɗin Ƙarfafawa Voltage
Ƙididdigar ƙayyadaddun ƙididdiga voltage na na'urar shine 12 VDC (9…14 VDC). Matsakaicin halin yanzu shine 850mA. Voltage ana kawota ga mai haɗin layi mai alamar Supply 9…14VDC (cf. Figure Kuva:581/Labcom 442 – Rakenne ja liitynnät). Na'urar tana da fius ɗin rarraba 1 AT (5 x 20 mm, bututun gilashi).
- Ajiyayyen baturi
Hakanan ana samun na'urar tare da ajiyar baturi idan kuna da ikotage. An haɗa baturin zuwa mai haɗawa a saman allon kewayawa na na'urar. Muna ba da shawarar ɗaure baturin ta amfani da sitika mai gefe biyu (Hoto na 4).
Hoto na 4: Haɗa madadin baturi zuwa Labcom 442.
Labcom 442 koyaushe yana cajin baturin a ƙaramin halin yanzu, koyaushe yana kiyaye batirin yana aiki. Ya kamata kutage faruwa, Labcom 442 zai aika da saƙon ƙararrawa "Rashin Ƙarfafawa" zuwa saitunan lambobin waya kuma ya ci gaba da aiki na tsawon sa'o'i ɗaya zuwa kusan hudu, dangane da, don tsohon.ample, adadin ma'auni da aka haɗa da shi da zafin jiki na yanayi.- Tashar 1: 3 h
- Tashoshi 2: 2,5 h
- Tashoshi 3: 1,5 h
- Tashoshi 4: 1,0 h
Tebur 1: Rayuwar baturi tare da ma'auni daban-daban
An auna rayuwar baturin da aka nuna a cikin 1 ta amfani da madaidaicin 20mA a cikin ma'auni. Wannan yana nufin cewa a zahiri, rayuwar baturi sau da yawa ya fi tsayi fiye da yadda aka nuna a nan. Ma'auni a cikin tebur sune mafi munin dabi'u. Da zarar wadata voltage an mayar, na'urar za ta aika da sakon "Power OK". Bayan iko kutage, za a sake cajin baturin zuwa cikakken ƙarfinsa a cikin kwanaki biyu. Yi amfani da baturan da Labkotec Oy ke bayarwa kawai.
Haɗin Ma'aunin Zazzabi
- Kuna iya haɗa ma'aunin zafin jiki ɗaya zuwa na'urar zuwa shigarwar analog 4. Ana amfani da thermistor NTC azaman firikwensin zafin jiki, wanda aka haɗa zuwa masu haɗin 28 da 30 kamar yadda Kuva:581/Labcom 442 - Rakenne ja liitynnät. Dole ne a saita Jumper S300 zuwa matsayi '2-3'.
- Ana iya auna zafin jiki ta amfani da shigarwar analog 4 kawai.
- Daidaiton ma'aunin shine +\- 1°C a yanayin zafi daga -20C zuwa +50°C da +\- 2°C a yanayin zafi daga -25°C zuwa +70°C.
- Yi amfani da firikwensin zafin jiki kawai wanda Labkotec Oy ke bayarwa.
- Duba kuma saitunan auna zafin jiki a sashe: 4 .
Haɗa Abubuwan Abubuwan Dijital
Labcom 442 yana fasalta bayanai na dijital guda huɗu na nau'in nutsewa na yanzu. Na'urar tana ba su 24 VDC wadata voltage tare da halin yanzu iyakance zuwa kusan 200mA. Ana raba wutar lantarki da iyaka na yanzu ta duk abubuwan shigar da dijital da na analog. Na'urar tana iya ƙididdige lokutan ja da juzu'in abubuwan shigar dijital. Matsakaicin mitar bugun jini shine kusan 100 Hz.
Haɗin Gudanar da Relay
Labcom 442 yana fasalta abubuwan fitarwa guda biyu sanye take da lambobin sadarwa masu canzawa waɗanda za a iya amfani da su don aikace-aikacen sarrafawa daban-daban (cf. Figure Kuva: 581/Labcom 442 – Rakenne ja liitynnät). Ana iya sarrafa relays ta saƙonnin rubutu ko ta amfani da LabkoNet. Labcom 442 kuma yana da ayyuka na ciki don amfani da relays.
Kashewa
Domin kiyaye isasshen matakin kariya daga tsangwama, muna ba da shawarar yin amfani da igiyoyin igiya na kayan aikin da aka zana da, don abubuwan shigar da analog, igiya mai riguna biyu. Yakamata a shigar da na'urar gwargwadon iyawa daga raka'a masu ɗauke da sarrafawar relay, da sauran igiyoyi. Ya kamata ku guje wa hanyar shigar da igiyoyi kusa da 20 cm daga sauran igiyoyi. Dole ne a kiyaye kebul ɗin shigarwa da relay daban daga aunawa da igiyoyin sadarwa. Muna ba da shawarar yin amfani da ƙasa mai maki ɗaya.
Shigar da katin SIM
- Labcom 442 yana aiki akan mafi yawan haɗin 2G, LTE, LTE-M da Nb-IoT.
- Na'urorin LabkoNet suna zuwa tare da katin Micro-SIM da aka riga aka shigar, wanda ba za a iya maye gurbinsa ba.
- Idan kuna son amfani da saƙon SMS, kuna buƙatar tabbatar da cewa biyan kuɗin ku yana goyan bayan saƙon SMS.
- Shigar da katin Micro-SIM(3FF) da ka samu na sashin sadarwa na Labcom 442 a cikin wayarka ta hannu kuma ka tabbata cewa aikawa da karɓar saƙonnin rubutu yana aiki.
- Kashe tambayar lambar PIN daga katin SIM ɗin.
- Saka katin SIM ɗin cikin mariƙin kamar yadda aka nuna a hoto na 5. Bincika daidai matsayin katin SIM ɗin daga hoton jagora na allon da'ira kuma tura katin SIM ɗin a wannan wuri zuwa ƙasan mariƙin.
Haɗa eriya ta waje
Ta hanyar tsoho, na'urar tana amfani da eriya ta ciki. Amma kuma yana yiwuwa a haɗa eriya ta waje. Nau'in haɗin eriya akan PCB mace ce ta MMCX, don haka mai haɗin eriya na waje dole ne ya kasance na MMCX na namiji.
Aiki na LED fitilu
Ana yiwa fitilun fitilun LED alamar na'urar akan allon kewayawa a cikin firam ɗin murabba'i. Hakanan akwai rubutun ganowa kusa dasu.
| Mai gano allon allon kewayawa | Bayanin mai gano LED |
Bayanin aiki na LED |
|
PWR |
PoWeR – kore 230VAC sigar voltagda hali |
LED yana haskakawa lokacin da voltage 230VAC. |
| MPWR | Module Rediyo PoWeR – Koren Rediyon module voltage-state | Yana haskakawa lokacin da modem voltage yana kan. |
|
AI |
Kuskuren shigar da Analog – ja hasken shigar da Analogue na yanzu | AIE yana ƙyalli idan shigar da halin yanzu a cikin kowane shigarwar analog A1…A4 shine> 20.5mA, in ba haka ba AIE a kashe. |
|
REG |
Rijista a cibiyar sadarwa - rawaya
Halin rajista na cibiyar sadarwa na modem |
A kashe REG – Ba a yiwa modem rajista a cibiyar sadarwa ba.
REG blinks - Modem yana rajista amma Ƙarfin sigina shine <10 ko ƙarfin siginar ba a karɓa ba tukuna. REG yana walƙiya ci gaba - rijista kuma ƙarfin sigina shine> 10 |
|
GUDU |
Data RUN – kore Ayyukan modem | RUN yana kiftawa a tazara na 1s - Jiha ta al'ada RUN tana ƙiftawa kusan. tazara na 0.5 s - watsa bayanai na modem ko liyafar yana aiki. |
|
BAT |
Matsayin BATtery – Matsayin rawaya na baturin madadin | BAT lumshe ido – cajar baturi yana kunne
BAT yana haskakawa - An cika baturin Ajiyayyen. BAT a kashe - babu madadin baturi da aka shigar. |
|
NETW |
NETWOrk – Nau'in cibiyar sadarwa ta Operator |
Nau'in cibiyar sadarwa mai aiki, jihar mai nuna alama ya dogara da fasahar rediyo kamar haka:
LTE / NB-Iot gida - yana haskakawa gabaɗaya. 2G gida - yana ƙyalli sau ɗaya a cikin 2 s period. LTE/NB-Iot yawo - yana ƙyalli sau ɗaya a cikin lokacin 1s. 2G yawo - yana lumshe ido sau biyu a cikin tsawon 2s. |
| IOPWR | Input-Output-PoWeR – kore Analog fitarwa voltagda hali | Yana haskakawa lokacin da filin shigar da analog voltage wadata yana kunne |
| R1 | Relay1 - Hasken Matsayin Lemu na Relay 1 | Yana haskakawa lokacin da aka ƙarfafa relay R1. |
| R2 | Relay2 - Hasken Matsayin Lemu na Relay 2 | Yana haskakawa lokacin da aka ƙarfafa relay R2. |
KA'IDAR AIKI
Aiki
- Labcom 442 yana aika ƙararrawa da sakamakon auna azaman saƙonnin rubutu, ko dai kai tsaye zuwa wayarka ta hannu, ko zuwa uwar garken LabkoNet®.
- Kuna iya ayyana tazarar lokacin da ake aika sakamakon awo zuwa lambobin waya da ake so. Hakanan zaka iya tambayar sakamakon aunawa tare da saƙon rubutu.
- Baya ga saitin tazarar aika da aka ambata a baya, na'urar za ta ɗauki karatu daga na'urori masu auna firikwensin a lokacin saita lokaci, kuma ta aika ƙararrawa, idan karatun baya cikin ƙayyadaddun iyaka na sama da ƙasa. Canjin matsayi a abubuwan shigar dijital kuma yana haifar da aika saƙon rubutu na ƙararrawa.
- Kuna iya canza saitunan na'urar da sarrafa relays tare da saƙon rubutu.
Saita
Kuna iya saita Labcom 200 cikakke ta saƙonnin rubutu. Saita sabuwar na'ura kamar haka:
- Saita lambobin wayar afareta
- Saita lambobin waya na mai amfani
- Saita sunan na'urar da ma'auni don ma'auni da abubuwan shigar da dijital
- Saita saƙon ƙararrawa
- Saita lokaci
Labcom 442 da Wayoyin hannu
Hoton da ke ƙasa yana bayyana saƙonnin da aka aika tsakanin mai amfani da sashin sadarwa na Labcom 442. Ana aika saƙon azaman saƙon rubutu, wanda aka bayyana dalla-dalla daga baya a cikin wannan takaddar.
Kuna iya adana nau'ikan lambobin waya guda biyu akan na'urar:
- Lambobin waya na ƙarshen mai amfani, waɗanda aka aika ma'auni da bayanin ƙararrawa zuwa gare su. Waɗannan lambobin suna iya neman sakamakon aunawa da sarrafa relays.
- Lambobin waya masu aiki, waɗanda za a iya amfani da su don gyara saitunan na'urar. Ba a aika ma'auni ko bayanin ƙararrawa zuwa waɗannan lambobin ba, amma suna iya neman sakamakon aunawa da sarrafa relays.
NB! Idan kana son karɓar ma'auni da bayanin ƙararrawa zuwa lambar waya ɗaya daga cikin abin da kake son gyara saitunan na'ura, dole ne ka saita lambar da ake tambaya azaman mai amfani na ƙarshe da lambar wayar afareta.
Labcom 442 da LabkoNet®
- Ana iya haɗa Labcom 442 zuwa tsarin sa ido na LabkoNet® na tushen Intanet. Fa'idodin tsarin LabkoNet® idan aka kwatanta da haɗin wayar hannu sun haɗa da ci gaba da saka idanu akan haɗin kai da adanawa da wakilcin gani na ma'auni da bayanin ƙararrawa.
- Ana watsa bayanin ƙararrawa da ma'aunin da aka karɓa daga wurin auna ta hanyar sashin sadarwa zuwa sabis na LabkoNet® ta hanyar sadarwar wayar hannu. Sabis ɗin yana karɓar bayanan da sashin sadarwa ya aika kuma yana adana su a cikin rumbun adana bayanai, wanda daga baya za a iya karanta su, misali. don dalilai na rahoto.
- Sabis ɗin kuma yana bincika bayanai daga kowace tashar auna da na'urar ta aika, tana canza shi zuwa tsarin da ake so kuma yana bincika ƙimar da ba ta cikin ƙayyadaddun ƙararrawa. Lokacin da sharuɗɗan ƙararrawa suka cika, sabis ɗin zai aika ƙararrawa zuwa ƙayyadaddun adiresoshin e-mail azaman e-mail da lambobin waya azaman saƙon rubutu.
- Bayanan ma'auni na iya zama viewed akan Intanet a www.labkonet.com ta amfani da ID na mai amfani na ƙarshen mai amfani, duka a lamba da zane tare da mai binciken Intanet na yau da kullun.
- Har ila yau, LabkoNet yana da kewayon ƙayyadaddun dabaru na aikace-aikace waɗanda za a iya amfani da su tare da samfurin Labcom 442.
AMSA DA UMURNI DA NA'URORI
Lambobin waya
- Lambobin waya na Mai amfani da Ƙarshe
Saƙon saitin don mai amfani na ƙarshe da lambobin waya na afareta ya ƙunshi filayen masu zuwa, ware ta sarari.Filaye Bayani TEL ko OPTEL
TEL = Lambar saƙo don saƙon saitin lambar waya mai amfani OPTEL = Lambar saƙo don saƙon saitin lambar wayar afareta
Lambar waya a tsarin ƙasa da ƙasa Kuna iya aika duk lambobin wayar da na'urar ta karɓa a cikin saƙo ɗaya (a zaton sun dace da saƙon rubutu ɗaya = haruffa 160).
Kuna iya saita lambobin waya na ƙarshen mai amfani goma (10). Zaka iya saita lambobin wayar afareta biyar (5).
Na'urar za ta adana lambobin a cikin tsari na farko da ke akwai
ramummuka. Idan saƙon ya ƙunshi lambobin waya fiye da goma ko kuma ramukan ƙwaƙwalwar ajiya sun riga sun cika, duk ƙarin lambobin waya ba za a adana su ba.
A sampsaƙon
TEL +35840111111 +35840222222 +35840333333
yana ƙara lambobin waya masu amfani uku zuwa na'urar. Amsar na'urar ga wannan saƙon (tare da lambar wayar ƙarshen mai amfani da aka saita a baya wanda aka rigaya an adana shi a ƙwaƙwalwar ajiya) shine:
TEL 1:+3584099999 2:+35840111111 3:+35840222222 4:+35840333333
watau amsar na'urar ta kasance kamar haka:
TEL :
Saƙon zai ƙunshi nau'i-nau'i-nau'i-nau'i masu yawa kamar yadda akwai lambobi da aka adana a ƙwaƙwalwar ajiya.
Kuna iya tambayar lambobin wayar masu amfani da aka saita don na'urar tare da umarni mai zuwa:
TEL
Kuna iya tambayar lambobin wayar afareta tare da umarni mai zuwa:
OPTEL - Goge Lambobin Wayar Mai Amfani da Ƙarshe
Zaka iya share lambobin waya da aka saita akan na'urar tare da mai amfani na ƙarshe da saƙonnin goge lambar waya. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani DELTEL = Lambar saƙo don goge lambar wayar mai amfani ta ƙarshe DELTEL ko sako DELOPTEL DELOPTEL = Lambar saƙo don goge lambar wayar afareta sako < ƙwaƙwalwar_slot_
Ramin ƙwaƙwalwar ajiyar lambar waya da aka adana akan na'urar. Kuna iya nemo nouumt btheerm> emory ramummuka tare da tambayoyin TEL da OPTEL. Idan ka shigar da lambar ramin ƙwaƙwalwar ajiya fiye da ɗaya, dole ne ka raba su ta sarari. A sampsaƙon
DELTEL 1
yana share lambobin waya masu amfani na ƙarshe da aka adana a cikin ma'aunin ƙwaƙwalwar ajiyar na'urar 1 da 2. Lambar wayar ƙarshen mai amfani ta uku da aka adana a cikin ƙwaƙwalwar ajiyar tana ci gaba da zama a cikin tsohuwar ramin ta.
Amsar na'urar ga saƙon da ya gabata yana ƙididdige ragowar lambobi.
TEL 3:+3584099999
Saitunan asali Lokacin Gudanarwa
- Na'ura ko Sunan Yanar Gizo
Kuna iya amfani da saƙon sunan na'urar don saita sunan na'urar, wanda aka nuna daga yanzu a farkon duk saƙonni. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani SUNAN Lambar saƙo don saƙon Sunan Na'ura. Na'ura ko sunan shafin. Matsakaicin tsayin haruffa 20. A sampsaƙon
Sunan Labcom442
za a yarda da na'urar tare da saƙo mai zuwa
Labcom442 SUNAN Labcom442
watau amsar na'urar ta kasance kamar haka:
SUNA
NB! Saitin Sunan Na'urar na iya haɗawa da sarari, misali.
NAME Kangasala Labkotie1
Kuna iya tambayar sunan na'urar tare da umarni mai zuwa:
SUNAN - Tazarar Watsawa da Lokacin Saƙon Aunawa
Kuna iya saita tazarar watsawa da lokuta don saƙon awo da na'urar ta aiko tare da wannan umarni. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani TXD Lambar saƙo don tazarar watsawa da saƙon lokaci. Tazara tsakanin isar da saƙon awo a cikin kwanaki. Lokutan watsawa don auna saƙonni a tsarin hh:mm, inda hh = hours (NB: 24-hour clock) mm = minti
Kuna iya saita matsakaicin lokutan watsawa shida (6) kowace rana a cikin
na'urar. Dole ne a raba su da sarari a cikin saƙon saitin.
A sampsaƙon
TXD 1 8:15 16:15
za ta saita na'urar don aika saƙon awonta kowace rana da ƙarfe 8:15 da 16:15. Amsar na'urar ga wannan sakon zai kasance:
Labcom442 TXD 1 8:15 16:15
watau amsar na'urar ta kasance kamar haka:
TXD
Kuna iya tambayar na'urar don tazarar watsawa tare da umarni mai zuwa:
TXD
Kuna iya share lokutan watsawa ta saita lokacin zuwa 25:00. - Share lokutan watsawa na saƙonnin awo
Ana iya amfani da wannan umarni don share lokutan watsawa na saƙonnin awo gaba ɗaya daga ƙwaƙwalwar ajiya.Filin Bayani DELTXD Ma'aunin watsa saƙon mai gogewa. Amsar na'urar ga wannan sakon zai kasance:
Farashin TXD0
- Lokaci
Kuna iya saita lokacin agogon ciki na na'urar tare da saƙon saitin lokaci. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Kentä Kuwa KYAUTA Lambar saƙo don saƙon saitin lokaci. Shigar da kwanan wata a tsarin dd.mm.yyyy ,inda dd = rana mm = wata
yy = shekara
Shigar da lokacin a hh:mm format, inda hh = hours (NB: 24-hour clock) mm = minti
A sampsaƙon
LOKACI 27.6.2023 8:00
zai saita agogon ciki na na'urar zuwa 27.6.2023 8:00:00 Na'urar za ta ba da amsa ga saƙon saitin lokaci kamar haka:
27.6.2023 8:00
Kuna iya tambayar lokacin na'urar ta hanyar aika umarni mai zuwa:
KYAUTA - Sabunta lokacin gida ta atomatik daga cibiyar sadarwar afareta
Na'urar za ta sabunta lokaci ta atomatik daga cibiyar sadarwar afareta lokacin da aka haɗa ta da cibiyar sadarwa. Yankin lokacin tsoho shine UTC. Idan kuna son sabunta lokacin zuwa lokacin gida, ana iya kunna wannan kamar haka:Filin Bayani AUTOTIME Saita saƙon lokaci tag rubutu. 0 = zome lokaci shine UTC.1 = lokacin zome shine lokacin gida. A sampsaƙon
AUTOTIME 1
don saita na'urar don ɗaukaka zuwa lokacin gida. Na'urar tana amsa saitin lokaci tare da saƙo
AUTOTIME 1
Saitin yana aiki bayan sake kunna na'urar ko modem. - Tambayar Ƙarfin Sigina
Kuna iya tambayar ƙarfin siginar modem tare da umarni mai zuwa:
CSQ
Amsar na'urar tana da tsari mai zuwa:
CSQ 25
Ƙarfin sigina na iya bambanta tsakanin 0 da 31. Idan ƙimar tana ƙasa da 11, haɗin gwiwa bazai isa don isar da saƙonni ba. Ƙarfin sigina 99 yana nufin cewa har yanzu ba a karɓi ƙarfin sigina daga modem ɗin ba.
Saitunan aunawa
- Saitin Aunawa
Kuna iya saita sunaye, sikeli, raka'a, da iyakokin ƙararrawa da jinkirin ma'auni da aka haɗa zuwa abubuwan shigar analog na na'urar tare da saƙon saitin auna. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani AI
Lambar saƙo don saƙon saitin auna. Lambar tana nuna shigar da ma'aunin jiki don na'urar. Ƙididdiga masu yiwuwa sune AI1, AI2, AI3 da AI4.
Rubutun kyauta wanda aka ayyana azaman sunan ma'auni. Ana amfani da sunan ma'aunin azaman mai gano ma'auni a ma'auni da saƙon ƙararrawa. Cf. domin misaliample Saƙon Aunawa. <4mA> Ƙimar aunawa da na'urar ke bayarwa lokacin da firikwensin halin yanzu ya kasance 4 mA. (haske) <20mA> Ƙimar aunawa da na'urar ke bayarwa lokacin da firikwensin halin yanzu ya kasance 20 mA. (haske) Naúrar ma'auni (bayan zazzagewa). Ƙimar ƙararrawar ƙananan iyaka (bisa ga sikelin da aka yi a sama). Cf. Hakanan saitin saƙon ƙararrawa kaɗan a cikin sashe 6 Ƙimar ƙararrawa mafi girma (bisa ga sikelin da aka yi a sama). Cf. Hakanan saitin saƙon ƙararrawa babba a cikin sashe 6 Jinkirin ƙararrawa don aunawa cikin daƙiƙa. Don kunna ƙararrawa, ma'aunin dole ne ya kasance sama ko ƙasa da iyakar ƙararrawa na tsawon lokacin duka. Mafi tsayin jinkirin da zai yiwu shine 34464 seconds (~ 9 hours 30 min). A sampsaƙon
AI1 Rijiyar matakin 20 100 cm 30 80 60
yana saita ma'aunin da aka haɗa da shigarwar analog 1 kamar haka:- Sunan ma'aunin Well_level
- Ƙimar 20 (cm) yayi daidai da ƙimar firikwensin 20 mA
- Ƙimar 100 (cm) yayi daidai da ƙimar firikwensin 20 mA
- Naúrar ma'auni shine cm
- Ana aika ƙararrawar ƙananan iyaka lokacin da matakin rijiyar ya ƙasa da 30 (cm)
- Ana aika ƙararrawa mafi girma lokacin da matakin rijiyar ya haura 80 (cm)
- Jinkirin ƙararrawa shine 60s
- Saita Auna Zazzabi
Kuna iya haɗa firikwensin zafin jiki nau'in NTC zuwa shigarwar analog 4. Kuna iya kunna ma'aunin zafin jiki tare da umarni mai zuwa:
AI4MODE 2 0.8
Bugu da ƙari, jumper S300 kusa da tashar 4 dole ne a sanya shi a cikin matsayi daidai. Ƙimar ma'auni da aka kwatanta a cikin sashin da ya gabata ba zai shafi saitunan ma'aunin zafin jiki ba tare da ma'auni da iyakokin ƙararrawa. Don haka, ana iya amfani da umarnin AI4 don saita naúrar azaman C ko degC da 0 °C da 30 °C azaman ƙimar ƙararrawa kamar haka (jinkiri 60 seconds):
AI4 Zazzabi 1 1 C 0 30 60 - Tace Auna
Ƙimar ma'auni daga wuri guda a cikin lokaci ba zai zama wakilci na ainihin ƙimar a cikin yanayi lokacin da ake tsammanin matakin saman zai yi saurin canzawa ba. Tace daga abubuwan shigar analog yana da kyau a irin waɗannan lokuta. Halin auna da aka kwatanta a sama zai iya faruwa, misaliample, a cikin auna matakin saman tafkin, inda sakamakon zai canza santimita da yawa a cikin 'yan dakiku saboda raƙuman ruwa.Filin Bayani AI MODE
Lambar saƙo don saƙon tace ma'auni, inda = 1… 4. Lambar tana nuna shigar da ma'aunin jiki na na'urar.
Ƙimar masu yuwuwa sune AI1MODE, AI2MODE, AI3MODE da AI4MODE
Yanayin tacewa. 0 = Ana kunna abin da ake kira dijital RC tacewa don tashar analog, watau, ana canza sakamakon ma'aunin tare da ma'aunin tacewa , wanda ya bambanta tsakanin sakamakon jere.
Abun tacewa. Duba ƙasa. Idan yanayin ya kasance 0, shine ma'aunin tacewa tsakanin 0.01 da 1.0. Ana samun mafi girman tacewa tare da ƙimar 0.01. Ba a yin tacewa lokacin
shine 1.0.
Kuna iya ayyana tacewa daban don kowane shigarwar analog.
Kuna iya ayyana tacewa ga kowane shigarwar analog tare da umarni mai zuwa:
AIMODE
Don misaliample, umurnin
AI1MODE 0 0.8
yana saita ma'aunin tacewa 0.8 don shigar da ma'auni 1, wanda ke haifar da bambanci tsakanin sakamakon jere.
Kuna iya tambayar yanayin tacewa da sigar kowane shigarwar analog tare da umarni mai zuwa:
AI MODE
inda shine adadin shigar da ake tambaya.
Amsar na'urar tana da tsari mai zuwa:
TXD AIMODE
NB! Idan ba a yi saitin AIMODE don tashar ba, saitin tsoho zai zama yanayin 0 (fitar RC na dijital) tare da adadin 0.8. - Saitin Hysteresis don Shigarwar Analog
Idan kuna so, zaku iya saita ƙimar kuskuren juyi don shigarwar analog. Matsakaicin kuskuren hysteresis iri ɗaya ne ga duka ƙananan iyakoki da na sama. A babba iyaka, ƙararrawa tana kashewa lokacin da ƙimar shigarwar ta faɗi aƙalla ƙimar ƙararrawa ƙasa da iyakar ƙararrawa. Aiki a ƙananan iyaka shine ta halitta akasin haka. Kuna iya saita iyakacin kuskuren hysteresis tare da saƙo mai zuwa:
AIHYST
inda shine adadin shigar analog.
Sampsaƙon
AI1HYST 0.1
Ƙungiyar ma'auni don iyakar kuskuren hysteresis shine naúrar da aka ayyana don iyakar da ake tambaya. - Saita Adadin Decimals
Kuna iya canza adadin decimals a lambobi na goma a ma'auni da saƙon ƙararrawa tare da umarni mai zuwa:
AIDEC
Don misaliampHar ila yau, za ku iya saita adadin ƙididdiga don shigarwar analog 1 zuwa uku tare da saƙo mai zuwa:
Farashin 1DEC3
Na'urar za ta amince da saitin tare da saƙo mai zuwa:
AI1DEC 3
Saitunan Input na Dijital
- Saitin Shigar Dijital
Kuna iya saita abubuwan shigar dijital na na'urar tare da saƙon saitin shigarwar dijital. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani DI
Lambar saƙo don saƙon saitin shigarwa na dijital. Lambar tana nuna shigarwar dijital ta zahiri na na'urar. Ƙimar masu yuwuwa sune DI1, DI2, DI3 da DI4.
Rubutun kyauta wanda aka ayyana azaman sunan shigarwar dijital. Ana amfani da sunan shigarwar dijital azaman mai gano shigarwar a ma'auni da saƙon ƙararrawa. Cf. domin misaliampSaƙon Aunawa: 3 Rubutun da ke daidai da yanayin buɗewar shigar dijital. Rubutun da ya yi daidai da yanayin shigarwar dijital. Yanayin aiki na shigarwar dijital 0 = ƙararrawa yana kunna akan buɗaɗɗen matsayi 1 = ƙararrawa yana kunna kan rufaffiyar matsayi
Jinkirin ƙararrawa a cikin daƙiƙa. Mafi tsayin jinkirin da zai yiwu shine 34464 seconds (~ 9 hours 30 min). ABIN LURA! Lokacin da aka saita jinkirin shigarwar dijital zuwa daƙiƙa 600 ko sama da haka kuma an kunna ƙararrawa, jinkirin kashe ƙararrawa baya ɗaya da na kunnawa. A wannan yanayin, ana kashe ƙararrawa a cikin daƙiƙa 2 bayan shigarwar ta koma yanayin rashin aiki. Wannan ya sanya misali. kula da matsakaicin lokacin gudu na famfo mai yiwuwa.
A sampsaƙon
DI1 Maɓallin ƙofar buɗe rufe 0 20
yana saita shigarwar dijital na na'urar kamar haka:- Na'urar za ta aika da saƙon ƙararrawa bayan daƙiƙa 20 daga buɗewar maɓallin ƙofar da aka haɗa zuwa shigarwar dijital 1. Saƙon ƙararrawa yana cikin tsari mai zuwa:
Buɗe ƙofa - Da zarar an kashe ƙararrawa, saƙon yana cikin tsari mai zuwa:
An rufe kofa
- Na'urar za ta aika da saƙon ƙararrawa bayan daƙiƙa 20 daga buɗewar maɓallin ƙofar da aka haɗa zuwa shigarwar dijital 1. Saƙon ƙararrawa yana cikin tsari mai zuwa:
- Saitunan Ƙididdigar bugun jini
Kuna iya saita ƙididdigar bugun jini don abubuwan shigar dijital na na'urar. Saita sigogi masu zuwa don kunna kirgawa:Filin Bayani PC Lambar saƙo don saƙon ƙidayar bugun jini (PC1, PC2, PC3 ya da PC4).
Sunan mashin bugun bugun jini a cikin saƙon amsa na'urar.
Ƙungiyar ma'auni, don misaliampda 'lokaci'. Kuna iya saita counter don ƙarawa, misaliample, kowane bugun jini na 10th ko 100th. Saita adadin da ake so tsakanin 1 da 65534 a matsayin mai rarrabawa. Lokacin dole ne shigarwar dijital ta ci gaba da aiki kafin a yi rajistar bugun bugun jini a cikin ma'ajin. Naúrar lokacin da aka yi amfani da ita shine ms, kuma ana iya saita jinkiri tsakanin 1 da 254 ms. Sampsaƙon don kunna kirga bugun bugun jini:
PC3 Pump3_on sau 1 100
Amsar na'urar ga wannan sakon zai kasance:
PC3 Pump3_on sau 1 100
Sampsaƙon aunawa daga ƙidayar bugun jini:
Pump3_on sau 4005
Kuna iya share mashin bugun bugun jini tare da saƙo mai zuwa:
PC KYAUTA
domin misaliample
PC3CLEAR
Kuna iya share duk lissafin bugun bugun jini lokaci guda tare da saƙo mai zuwa:
PCALLCLEAR - Saita Ƙididdigar Kan-Lokaci don Abubuwan Shiga na Dijital
Kuna iya saita counter don abubuwan shigar dijital don ƙidaya su akan lokaci. The counter zai ƙara kowane dakika da dijital shigar da ke cikin "rufe" jihar. Sakon yana cikin tsari mai zuwa:Filin Bayani OT Mai gano ƙidayar lokaci, inda shine adadin shigarwar dijital. Sunan counter a cikin saƙon awo.
Ƙungiyar ma'auni a cikin saƙon amsa. An yi amfani da mai rarraba don raba lambar a cikin saƙon amsawa. sample saƙon da aka saita mai rarraba dijital shigarwar 2 counter zuwa ɗaya da 'daƙiƙa' a matsayin naúrar, kuma an saita sunan counter zuwa 'Pump2':
OT2 Pump2 seconds 1
Lura cewa naúrar filin rubutu ce kawai kuma ba za a iya amfani da ita don juyar da raka'a ba. Mai rarraba don wannan dalili ne.
Kuna iya kashe ma'aunin da ake so tare da saƙo mai zuwa:
OT KYAUTA
Kuna iya kashe duk kirga lokaci guda tare da saƙo mai zuwa:
OTALCLEAR
Saitunan fitarwa na Relay
- Gudanar da Relay
Kuna iya sarrafa relays na na'urar tare da saƙon sarrafawa. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani R Lambar saƙo don saƙon sarrafawa na relay. R
Mai ganowa Relay Ƙididdiga masu yiwuwa su ne R1 da R2.
Yanayin da ake so na relay 0 = fitarwa zuwa “buɗe” l. "kashe" 1 = fitarwa zuwa "rufe" l. "a kan" 2 = motsa jiki zuwa fitarwar relay
Tsawon bugun jini a cikin daƙiƙa. Wannan saitin yana da ma'ana ne kawai idan saitin da ya gabata ya kasance 2. Duk da haka, dole ne a saka wannan filin a cikin sakon koda kuwa ba a so. A irin waɗannan lokuta, muna ba da shawarar shigar da 0 (sifili) azaman ƙimar filin.
A sampsaƙon
R1 0 0 R2 1 0 R2 2 20
zai saita abubuwan da aka fitar na na'urar kamar haka:- Relays fitarwa 1 zuwa "kashe" jihar
- Sake fitar da fitarwa 2 da farko zuwa jihar “kunna” sannan zuwa yanayin “kashe” na daƙiƙa 20
Na'urar za ta ba da amsa ga saƙon sarrafawa kamar haka:
R
NB! A wannan yanayin, tsarin amsa ya bambanta da martani zuwa wasu umarni.
- Ƙararrawa mai sa ido kan amsawa na relay
Ana iya amfani da ƙararrawar faɗar rikici don saka idanu ko da'irorin da aka sarrafa ta hanyar relays R1 da R2 suna aiki. Sarrafa yana dogara ne akan amfani da abubuwan shigar da dijital, ta yadda lokacin da relay ke aiki dole ne matsayin mai sarrafa dijital ya zama '1', kuma lokacin da aka saki relay ɗin dole ne ya zama '0'. An haɗa sarrafawa zuwa abubuwan shigar da dijital ta yadda za a karanta ra'ayoyin sarrafawa don R1 daga shigarwar DI1 kuma ana karanta ra'ayoyin don relay R2 daga shigarwar DI2.Filin Bayani RFBACK Mai gano saƙon martani na relay Mai gano tashar relay Ƙimar masu yiwuwa su ne 1 (R1/DI1) ko 2 (R2/DI2)
Zaɓin ƙararrawar rikici 0 = Ƙararrawar rikici 1 = Ƙararrawar rikici a kunne
Jinkirin ƙararrawa a cikin daƙiƙa. Ana kunna ƙararrawa idan matsayin shigarwar dijital da ke sarrafa relay ba shine '1' bayan jinkiri ba. Matsakaicin jinkirta zai iya zama 300 s.
Sampda sako:
RFBACK 1 1 10
yana kunna sa ido kan fitarwar Relay R1 na na'urar tare da jinkirin ƙararrawa na 10s.
Hakanan ana iya saita matsayin relays biyu a lokaci guda:
RFBACK 1 1 10 2 1 15, tsarin tashoshi a cikin sakon ba shi da mahimmanci.
Na'urar koyaushe tana mayar da ƙimar saiti na tashoshi biyu a cikin saƙon saitin:
RFBACK 1 1 10 2 1 15
Ana iya kashe ƙararrawar sa ido ta saita yanayin kunnawa/kashe zuwa sifili, misali
RFBACK 1 0 10 - Haɗa ikon relay zuwa shigarwar analog
Hakanan za'a iya sarrafa relays bisa ga matakan shigarwar analog AI1 da AI2. An haɗe ikon sarrafawa zuwa abubuwan da aka shigar, tare da R1 ana sarrafa shi ta hanyar shigar da analog AI1 da relay 2 ta shigar da AI2. Relay yana jan lokacin da siginar auna yana sama da saitin iyaka na babba don jinkiri na babba kuma yana fitowa lokacin da siginar ma'aunin ya faɗi ƙasa da ƙananan iyaka kuma ya kasance a can ci gaba da jinkirin ƙananan iyaka. Sarrafa yana buƙatar saita tashoshi zuwa kewayon ma'auni mai ma'auni a cikin 'Sanya ma'auni' sashe na 3. Ƙarƙashin ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ma'aunin relay yana biye da kewayon ma'auni. Ikon Rel ay baya aiki idan sarrafa saman yana aiki kuma ana amfani da famfo 2. Idan akwai famfo guda ɗaya, ana iya amfani da relay 2. An nuna tsarin umarnin sarrafawa a ƙasa, sigogi ya kamata a raba su da sarari.Filin Bayani RAI Lambar saƙo don sarrafa isar da sako zuwa saƙon saitin shigarwar analog. Mai gano tashar relay Matsaloli masu yiwuwa su ne 1 (R1/AI1) ko 2 (R2/AI2)
Siginar auna ƙasa da matakin wanda relay zai saki bayan ɗan ƙaramin jinkiri. Ƙananan jinkiri a cikin daƙiƙa. The counter ne 32-bit Siginar auna sama da matakin wanda relay ɗin ke fitar da shi bayan jinkiri na babba. Babban jinkiri a cikin daƙiƙa. The counter ne 32-bit Sampsaƙon saitin:
RAI 1 100 4 200 3
An saita gudun ba da sanda 1 don ja lokacin da ƙimar siginar auna ta wuce 200 na daƙiƙa uku. Relay yana sakin lokacin da siginar ta faɗi ƙasa da 100 kuma ta kasance a wurin na aƙalla daƙiƙa 4.
Hakazalika, ana iya saita relay 2 tare da saƙon
RAI 2 100 4 200 3
Hakanan za'a iya saita su duka biyu tare da saƙo ɗaya:
RAI 1 2 100 4 200 3 2 100 4 200
Ana iya kashe wannan aikin ta shigar da umarni
AMFANI DA AI , a cikin wannan yanayin aikin shigar da analog ya canza zuwa so a cikin 4 .
Saitunan daidaitawa na modem
Saitunan daidaitawar modem masu zuwa zasu fara aiki ne kawai bayan an sake saita modem ɗin. Sake saitin baya buƙatar yin bayan kowane umarni, ya isa ya yi shi a ƙarshen saitin. Bayan saitin fasahar rediyo, modem ɗin yana sake saitawa ta atomatik, don wasu umarni ya isa a sake saita modem ɗin a ƙarshen tsarin. Duba sakin layi na 5
- Zabar fasahar rediyo
Ana iya daidaita fasahar rediyon da modem ɗin ke amfani da shi tare da saƙo ɗaya.Filin Bayani RADIO Lambar saƙo don saitin fasahar rediyo. RADIO 7 8 9 Yana saita LTE azaman cibiyar sadarwa ta farko, Nb-IoT na biyu da 2G na ƙarshe. Na'urar tana amsa saƙo
RADIO 7,8,9
Saitin yana aiki bayan sake kunna modem.
Ana iya karanta saitin na yanzu tare da saƙon saitin ba tare da sigogi ba.
RADIO
Idan ana son hana amfani da fasahar rediyo, an cire lambar lamba daidai daga umarnin. Don misaliample, tare da umarni
RADIO 7
Ana iya hana modem daga haɗawa zuwa cibiyar sadarwar Nb-Iot, ba da damar modem ɗin haɗi kawai zuwa cibiyar sadarwar LTE/LTE-M ko 2G.
Ana ba da izinin fasaha masu zuwa:
- 7: LTE
- 8: Nb-IoT
- 9: 2G
LTE (7) da 2G (9) an zaɓi su ta tsohuwa.
- Mai aiki profile zaɓi
Ana iya amfani da saƙo don saita modem zuwa takamaiman ma'aikacin mai aikifileFilin Bayani MNOPROF Lambar saƙo don ma'aikacin profile saitin. <profile lamba> Profile lambar mai aiki An yarda profile zabin su ne:
- 1: SIM ICCID/IMSI
- 19: Vodafone
- 31: Deutsche Telekom
- 46: Orange Faransa
- 90: Duniya (tehdas asetus)
- 100: Matsayin Turai
Exampsaƙon saitin:
MNOPROF 100
Amsar na'urar ta kasance:
MNOPROF 100
Saitin yana aiki bayan sake kunna modem.
Ana karanta saitin yanzu tare da saƙo ba tare da sigogi ba.
MNOPROF
- LTE mitar makada don modem ɗin ku
Za a iya saita madaurin mitar hanyar sadarwar LTE na modem bisa ga hanyar sadarwar afareta.Filin Bayani Farashin LTE Lambar saƙo don saitin maƙallan mitar LTE. Lambobin mitar LTE Ƙungiyoyin mitar da aka goyan baya sune:
- 1 (2100 MHz)
- 2 (1900 MHz)
- 3 (1800 MHz)
- 4 (1700 MHz)
- 5 (850 MHz)
- 8 (900 MHz)
- 12 (700 MHz)
- 13 (750 MHz)
- 20 (800 MHz)
- 25 (1900 MHz)
- 26 (850 MHz)
- 28 (700 MHz)
- 66 (1700 MHz)
- 85 (700 MHz)
An saita maƙallan mitar da za a yi amfani da su ta amfani da umarni tare da sarari
BANDS LTE 1 2 3 4 5 8 12 13 20 25 26 28 66
Na'urar tana amsa saƙon saitin:
LTE 1 2 3 4 5 8 12 13 20 25 26 28 66
Saitin yana aiki bayan sake kunna modem.
ABIN LURA! Idan saitunan band ɗin ba daidai ba ne, shirin zai yi watsi da su kuma ya zaɓi mitoci masu goyan baya kawai daga saƙon.
Ana karanta saitin na yanzu tare da saƙon saitin ba tare da sigogi ba.
Farashin LTE
- Nb-IoT mitar makada na modem
Za a iya daidaita maƙallan mitar cibiyar sadarwar Nb-IoT kamar na hanyar sadarwar LTE.Filin Bayani BANDA NB Lambar saƙo don saitin maƙallan mitar Nb-IoT. Nb-IoT lambobin band mita. Ƙungiyoyin mitar da aka goyan baya iri ɗaya ne da na cibiyar sadarwar LTE kuma saitin daidai yake da na cibiyar sadarwar LTE:
BANDS NB 1 2 3 4 5 8 20
Na'urar zata amsa:
NB 1 2 3 4 5 8 20
Saitin yana aiki bayan an sake kunna modem.
Ana karanta saitin na yanzu tare da saƙon saitin ba tare da sigogi ba.
BANDA NB - Karanta ainihin saitunan rediyo na modem
Filin Bayani BANZA Lambar saƙo don ainihin saitunan rediyo na modem. Saƙon yana ba ku damar karanta mahimman saitunan a tafi ɗaya, don amsa waɗanda zaɓaɓɓun fasahar rediyo, sunan mai aiki, cibiyar sadarwa ta yanzu, LTE da makadan Nb-IoT da aka yi amfani da su, mai aiki pro.file da LAC da CI lambobin da ke nuna wurin modem a matakin salula ana buga su.
RADIO 7 8 9 OPERATOR “Te lia FI” LTE
LTE 1 2 3 4 5 8 12 13 20 25 26 28 66
NB 1 2 3 4 5 8 20
MNOPROF 90
Farashin 02F4 CI 02456 - Sunan afaretan cibiyar sadarwa da karanta nau'in cibiyar sadarwar rediyo
Filin Bayani MAI SHAWARA Lambar saƙo don sunan afaretan cibiyar sadarwa da nau'in cibiyar sadarwar rediyo. Na'urar tana amsawa da saƙo mai ɗauke da sunan cibiyar sadarwar da mai aiki ke amfani da shi, fasahar rediyon da aka yi amfani da ita
LTE/NB/ 2G da nau'in cibiyar sadarwa HOME ko YAWA.
OPERATOR “Telia FI” LTE GIDA - Sake saitin modem
Ana buƙatar sake kunna modem bayan saituna kamar rukunin rediyo, fasahar rediyo da pro afaretafile.Filin Bayani MODEMRST Lambar saƙo don sake saita modem. Na'urar tana amsawa:
SAKE FARA MODEM…
Ƙararrawa
- Rubutun ƙararrawa
Kuna iya ayyana rubutun ƙararrawa waɗanda na'urar ta haɗa a farkon saƙonnin da aka aika lokacin da aka kunna ƙararrawa kuma aka kashe tare da saƙon saitin ƙararrawa. Duk shari'o'in biyu suna da nasu rubutu. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani ALTXT Lambar saƙo don saƙon saitin rubutu na ƙararrawa. . Rubutun da aka aika lokacin da aka kunna ƙararrawa, sai lokaci. Aika rubutu lokacin da aka kashe ƙararrawa. Rubutun ƙararrawa (ko dai ko >>) an saka shi cikin saƙon ƙararrawa tsakanin sunan na'urar da dalilin ƙararrawar. Duba ƙarin bayani a cikin sashe na saƙon ƙararrawa 8.
Sampsaƙon saitin rubutu na ƙararrawa:
ALTXT ALARM. KASHE KARARRAWA
Amsar na'urar ga wannan sakon zai kasance:
ALTXT ALARM. KASHE KARARRAWA
Saƙon ƙararrawa daidai zai kasance:
Labcom442 ALARM … - Rubutun Ƙararrawa na Ƙarfafawa da Ƙaƙwalwa
Kuna iya saita rubutun da ke nuna dalilin ƙararrawa da saƙon da aka kashe tare da wannan umarni. Don misaliampHar ila yau, lokacin da ma'auni ya yi ƙasa da ƙananan ƙimar ƙararrawa, na'urar za ta aika daidai da rubutun ƙararrawa na ƙananan iyaka a cikin saƙon ƙararrawa. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani AILTXT Lambar saƙo don iyakar auna saƙon saitin rubutu na ƙararrawa. . Rubutun da aka aika lokacin da ƙaramin ƙararrawa ke kunna ko kashewa, sai lokaci. Tsohuwar ƙimar wannan filin ita ce Karamar Iyaka. Rubutun da aka aika lokacin da aka kunna ko kashe ƙararrawa babba. Matsakaicin ƙimar wannan filin shine Babban Iyaka. Ana saka rubutun ƙararrawa na sama da ƙananan iyaka a cikin saƙon ƙararrawa bayan sunan ma'auni ko shigarwar dijital wanda ya haifar da ƙararrawa. Duba ƙarin bayani a cikin sashe na saƙon ƙararrawa 8
Sampsaƙon saitin:
AILTXT Ƙananan iyaka. Babban iyaka
Amsar na'urar ga wannan sakon zai kasance:
AILTXT Ƙananan iyaka. Babban iyaka
Saƙon ƙararrawa daidai zai kasance:
Labcom442 ALARM Measurement1 Babban iyaka 80 cm - Masu karɓar saƙon ƙararrawa
Kuna iya ayyana saƙon da aka aika wa wa da wannan umarni. A matsayin tsoho, ana aika duk saƙonni zuwa duk masu amfani. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani ALMSG Lambar saƙo don saƙon mai karɓar saƙon ƙararrawa. Ramin ƙwaƙwalwar ajiyar lambar waya da aka adana akan na'urar (zaku iya duba ramummuka tare da tambayar TEL). Waɗanne saƙonni ne aka aika, masu lamba kamar haka: 1 = ƙararrawa da ma'auni kawai 2 = ƙararrawa da ma'auni kawai da aka kashe
3 = ƙararrawa, ƙararrawa da aka kashe da ma'auni 4 = ma'auni kawai, babu saƙon ƙararrawa
8 = ba saƙon ƙararrawa ko ma'auni
A sampsaƙon
ALMSG 2 1
zai saita saƙonnin da aka aika zuwa lambar wayar mai amfani ta ƙarshe da aka adana a cikin ramin ƙwaƙwalwar ajiya 2 azaman ƙararrawa da ma'auni.
Amsar na'urar ga sampSaƙon zai kasance kamar haka (ƙunshe da lambar wayar da aka adana a cikin ƙwaƙwalwar ajiya 2):
Labcom442 ALMSG +3584099999 1
watau amsar na'urar ta kasance kamar haka:
ALMSG
Kuna iya tambayar bayanin mai karɓar ƙararrawa don duk lambobin wayar masu amfani tare da umarni mai zuwa:
ALMSG
Sauran Saituna
- Kunna Tashoshi
Kuna iya kunna tashoshin aunawa tare da kunna saƙon tasha. Lura, cewa tashoshin auna da aka saita tare da Saitin Aunawa ko Saƙon Saitin Shigar Dijital ana kunna ta atomatik.
Ciki har da lambar saƙo, saƙon na iya haɗawa da filaye masu zuwa waɗanda ke raba su da sarari.Filin Bayani AMFANI Lambar saƙo don kunna saƙon tasha. AI
Adadin tashar analog ɗin da za a kunna. Saƙo ɗaya na iya haɗawa da duk tashoshi na analog. Ƙididdiga masu yiwuwa sune AI1, AI2, AI3 da AI4
DI
Adadin shigarwar dijital da za a kunna. Saƙo ɗaya na iya haɗawa da duk abubuwan shigar da dijital. Ƙimar masu yuwuwa sune DI1, DI2, DI3 da DI4
Na'urar za ta ba da amsa ga saƙon saitin da tambaya (USE kawai) ta hanyar aika sabbin saitunan a cikin tsari iri ɗaya da saƙon saitin, ƙara sunan na'urar zuwa farkon.
Kuna iya kunna tashoshin auna na'urar 1 da 2 da abubuwan shigar dijital 1 da 2 tare da s masu zuwa.ampda sako:
AMFANI DA AI1 AI2 DI1 DI2 - Kashe tashar tashoshi
Kuna iya kashe tashoshin auna da aka riga aka ayyana kuma saita tare da kashe saƙon tasha. Ciki har da lambar saƙo, saƙon na iya haɗawa da filaye masu zuwa waɗanda ke raba su da sarari.Filin Bayani DEL Lambar saƙo don kashe saƙon tasha. AI
Adadin tashar analog ɗin da za a kashe. Saƙo ɗaya na iya haɗawa da duk tashoshi na analog. Ƙididdiga masu yiwuwa sune AI1, AI2, AI3 da AI4
DI
Adadin shigarwar dijital da za a kashe. Saƙo ɗaya na iya haɗawa da duk abubuwan shigar da dijital. Ƙimar masu yuwuwa sune DI1, DI2, DI3 da DI4
Na'urar za ta ba da amsa ga saitin saƙon ta hanyar aika masu gano duk tashoshi da ake amfani da su, ƙara sunan na'urar zuwa farkon.
Kuna iya kashe tashoshin auna na'urar 3 da 4 da abubuwan shigar da dijital 1 da 2 tare da s masu zuwa.ampda sako:
DEL AI3 AI4 DI1 DI2
Na'urar za ta ba da amsa tare da kunna tashoshi, misaliample
AMFANI DA AI1 AI2 DI3 DI4
Na'urar kuma za ta ba da amsa ga umarnin DEL kawai ta hanyar ba da rahoton tashoshin da aka kunna. - Low Aiki Voltage Ƙimar Ƙararrawa
Na'urar tana lura da aikintatage. Sigar VDC mai lamba 12 tana lura da aikin voltage kai tsaye daga tushen, misali baturi; sigar 230 VAC tana lura da voltage bayan taranfoma. Ƙananan aiki voltage ƙimar ƙararrawa yana saita juzu'itage matakin ƙasa wanda na'urar ke aika ƙararrawa. Saƙon ya ƙunshi filaye masu zuwa, ware ta sarari.Filin Bayani VLIM Lambar saƙo don ƙaramar aiki Voltage Saƙon Ƙimar Ƙararrawa. <voltage> Voltage, daidai zuwa maki goma sha ɗaya. Yi amfani da lokaci azaman mai raba goma. Amsar na'urar tana cikin tsari mai zuwa:
VLIMtage>
Don misaliample, lokacin da ka saita aiki voltage ƙararrawa kamar haka:
Zazzage VLIM 10.5
na'urar za ta aika ƙararrawa, idan mai aiki voltage sauka a kasa 10.5 V.
Saƙon ƙararrawa yana cikin tsari mai zuwa:
Ƙananan baturi 10.5
Kuna iya tambayar ƙaramin aiki voltage saitin ƙararrawa tare da umarni mai zuwa:
VLIM - Kafa ƙarartage na babban baturin madadin na'urar
Mains voltage na'urar tana lura da manyan hanyoyin voltage matakin da kuma lokacin da voltage ya faɗi ƙasa da ƙayyadaddun ƙima, ana fassara wannan azaman asarar mains voltage kuma na'urar tana aika da mains voltage alarm. Wannan saitin yana ba da damar saita voltage matakin da mains voltage ana fassara shi da cewa an cire shi. Matsakaicin ƙima shine 10.0V.
Saƙon ya ƙunshi filaye masu zuwa, wanda sarari ya keɓe.Filin Bayani VBACKUP Ajiyayyen baturi voltage saitin sako. <voltage> Voltage darajar a volts zuwa wuri goma sha ɗaya. Mai raba tsakanin lamba da sassa na goma dige ne. Laitteen vastaus vistiin on muotoa
VBACKUPtage>
Don misaliample, lokacin saitawa
VBACKUP 9.5
sa'an nan na'urar ta fassara mains voltage kamar an cire lokacin da voltage a cikin aiki voltage ma'aunin ya faɗi ƙasa da 9.5V. Don neman saitin, yi amfani da umarnin
VBACKUP
ABIN LURA! Ƙimar saitin ya kamata koyaushe ya zama dan kadan sama da matsakaicin yuwuwar voltage na baturin ajiyar waje (misali + 0.2…0.5V). Wannan saboda na'urar tana kwatanta ƙimar da aka saita tare da juzu'in aikitage darajar kuma, idan ya faɗi ƙasa da saitin VBACKUP, yana fassara cewa voltage an cire. Idan darajar ta yi daidai da voltage na madadin baturi, babban jigon voltagAna ƙara ƙararrawa. - Baturi Voltage Tambaya
Kuna iya tambayar baturin voltage tare da umarni mai zuwa:
BATVOLT
Amsar na'urar tana da tsari mai zuwa:
BATVOLT V - Sigar Software
Kuna iya tambayar sigar software na na'urar tare da umarni mai zuwa:
VER
Amsar na'urar ga wannan sakon zai kasance:
Saukewa: LC442
Don misaliample
Na'ura1 LC442 v1.00 Jun 20 2023 - Share Filayen Rubutu
Kuna iya share filayen rubutu da aka ayyana tare da saƙonni ta saita ƙimar su azaman '?' hali. Don misaliampHar ila yau, za ku iya share sunan na'ura tare da saƙo mai zuwa:
SUNAN? - Sake saitin na'urar Labcom 442
Kentä Kuwa SYSTEMRST Umurnin Sake saitin Labcom 442 na'urar
SAKONNIN DA AKE AIKA WA KARSHEN MASU AMFANI DA NA'URAR
Wannan sashe yana bayyana saƙonnin da daidaitaccen nau'in software na sashin sadarwa na Labcom 442 ya aika. Idan wasu, takamaiman saƙon abokin ciniki an ayyana su, ana bayyana su a cikin takaddun daban.
- Tambayar Aunawa
Kuna iya tambayar na'urar don ƙimar ma'auni da jihohin abubuwan shigar da dijital tare da umarni mai zuwa:
M
Saƙon amsa na'urar zai haɗa da ƙimar duk tashoshi masu kunnawa. - Sakon Sakamakon Aunawa
Ana aika Saƙonnin Sakamakon Aunawa zuwa lambobin waya na ƙarshen mai amfani ko dai akan lokaci, dangane da saitin Tazarar Watsawa 2 ko azaman amsa ga saƙon rubutu na Aunawa 7 . Sakon sakamakon ma'auni ya ƙunshi filayen da suka rabu da sarari. Bayanan tashoshi da aka kunna akan na'urar kawai ana nunawa. Ana amfani da waƙafi azaman mai rarrabawa tsakanin duk sakamakon aunawa da jihohin shigar da dijital (sai na ƙarshe).
| Filin | Bayani | |
| Idan an ayyana suna don na'urar, ana saka ta a farkon saƙon. | ||
|
, |
Sunan tashar aunawa, sakamako, da naúrar kowane sakamako. An raba bayanai daga tashoshin ma'auni daban-daban ta waƙafi. | |
| Sunan da aka ayyana don auna n. | ||
| Sakamakon ma'auni n. | ||
| Naúrar don auna n. | ||
| , | Suna da yanayin kowane shigarwar dijital. An raba bayanan don shigarwar dijital daban-daban ta waƙafi. | |
| Sunan da aka ayyana don shigarwar dijital. | ||
| Halin shigar dijital. | ||
|
|
Idan an kunna ma'aunin bugun bugun jini don shigarwar dijital, ana nuna ƙimar sa a wannan filin. An raba bayanan ƙididdiga daban-daban ta waƙafi. | |
| Sunan counter. | ||
| Adadin bugun jini da mai rarraba ya raba. | ||
| Ƙungiyar ma'auni. | ||
|
|
Idan an kunna lissafin kan lokaci don shigarwar dijital, ana nuna ƙimar sa a wannan filin. An raba bayanan ƙididdiga daban-daban ta waƙafi. | |
| Sunan counter. | ||
| Lokacin shigar da dijital | ||
| Ƙungiyar ma'auni. | ||
A sampsaƙon
Labcom442 Matsayi mai kyau 20 cm, Nauyin 10kg, Rufe kofa, Rufe kofa, shiru.
yana nuna cewa na'urar mai suna Labcom442 ta auna kamar haka:
- Well_level (misali Ai1) an auna shi kamar 20 cm
- An auna nauyi (misali Ai2) kamar kilogiram 10
- Door_switch (misali Di1) yana cikin rufaffiyar jihar
- Door_buzzer (misali Di2) yana cikin yanayin shiru
A kula! Idan ba a bayyana sunan na'ura, sunan ma'auni da/ko naúrar ba, ba za a buga kome ba a wurinsu a cikin saƙon auna.
- Saitunan waƙafi a cikin Saƙonnin Aunawa
Idan ana so, zaku iya cire waƙafi daga saƙon mai amfani na ƙarshe (yawancin saƙon auna) da na'urar ta aiko. Kuna iya amfani da waɗannan saƙonnin don yin waɗannan saitunan.
Waƙafi ba a amfani:
USECOMMA 0
Waƙafi da ake amfani da su (saitin al'ada):
USECOMMA 1
Saƙon larararrawa
Ana aika saƙon ƙararrawa zuwa lambobin waya na ƙarshen mai amfani amma ba zuwa lambobin wayar mai aiki ba. Saƙon ƙararrawa ya haɗa da masu zuwa, ware ta sarari.
| Filin | Bayani |
| Idan an bayyana suna don na'urar tare da umarnin NAME, ana saka ta a farkon saƙon. | |
| Rubutun ƙararrawa da aka ayyana tare da umarnin ALTXT. misali HÄLYTYS. | |
|
ko |
Sunan ma'auni ko shigarwar dijital wanda ya haifar da ƙararrawa. |
| Dalilin ƙararrawa (ƙararamar ƙararrawa ko babba) ko rubutun jiha na shigarwar dijital. | |
|
kuma |
Idan ma'auni ne ya haifar da ƙararrawar, ƙimar ma'aunin da naúrar za a haɗa cikin saƙon ƙararrawa. Ba a haɗa wannan filin cikin saƙonnin ƙararrawa ta hanyar shigarwar dijital. |
Sampsako na 1:
ALARM Rijiyar matakin ƙananan iyaka 10 cm
yana nuna kamar haka:
- An auna matakin rijiyar don zama ƙasa da ƙananan iyaka.
- Sakamakon ma'aunin ya kasance 10 cm.
Sampda sakon 2 (Labcom442 da aka ayyana azaman sunan na'urar):
Labcom442 Ƙararrawa Ƙofa buɗe
yana nuni da cewa ƙararrawar ta faru ne sakamakon buɗewar da aka kunna.
A kula! Idan babu sunan na'ura, rubutun ƙararrawa, suna don ƙararrawa ko shigarwar dijital da/ko naúrar da aka bayyana, ba za a buga kome ba a wurinsu a cikin saƙon ƙararrawa. Don haka yana yiwuwa na'urar ta aika da saƙon ƙararrawa mai ɗauke da ƙimar ma'auni kawai, ko saƙon ƙararrawa na shigarwar dijital wanda ba shi da komai.
Saƙon da aka kashe ƙararrawa
Ana aika saƙon da aka kashe ƙararrawa zuwa lambobin waya masu amfani amma ba zuwa lambobin wayar mai aiki ba.
Saƙon da aka kashe ƙararrawa ya haɗa da masu zuwa, ware ta sarari.
| Filin | Bayani |
| Idan an bayyana suna don na'urar tare da umarnin NAME, ana saka ta a farkon saƙon. | |
| Rubutun da aka kashe ƙararrawa da aka ayyana tare da umarnin ALTXT. misali
KASHE ARArrawa. |
|
| tai |
Sunan ma'auni ko shigarwar dijital wanda ya haifar da ƙararrawa. |
| Dalilin ƙararrawa (ƙararamar ƙararrawa ko babba) ko rubutun jiha na shigarwar dijital. | |
| Idan ma'auni ne ya haifar da ƙararrawar, ƙimar ma'auni da naúrar za a haɗa su cikin saƙon da aka kashe ƙararrawa. Ba a haɗa wannan filin cikin saƙonnin ƙararrawa ta hanyar shigarwar dijital. |
A sampda sako:
RAGE ARARARRAWA To matakin ƙananan iyaka 30 cm
yana nuna kamar haka:
- Ƙararrawar ƙananan iyaka don auna matakin rijiyar an kashe shi.
- Sakamakon aunawa yanzu shine 30 cm.
Sample saƙo 2 (Ƙararrawar da aka ayyana azaman sunan na'urar)
ARARAWAR ARARAWAR RUFE Maɓallin ƙofa an rufe
yana nuna cewa a yanzu an rufe maɓallin kofa, watau ƙararrawar da buɗewar ta haifar ya kashe.
HIDIMAR DA KIYAYE
Tare da kulawa mai kyau, ana iya maye gurbin fis ɗin rarraba (alama F4 200 mAT) na na'urar da aka cire daga wutar lantarki tare da wani, IEC 127 mai yarda, 5 × 20 mm / 200 mAT gilashin tube fiusi.
Sauran Halin Matsala
Sauran sabis da kulawa ana iya yin su akan na'urar kawai ta mutumin da ya cancanta a cikin na'urorin lantarki da izini daga Labkotec Oy. A cikin matsala, tuntuɓi sabis na Labkotec Oy.
MAGANA
Karin Bayani Bayanin Fasaha
| Labcom 442 (12 VDC) | |
| Girma | 175mm x 125 mm x 75 mm (lxkxs) |
| Yadi | IP65, ƙera daga polycarbonate |
| Kebul bushings | 5 inji mai kwakwalwa M16 na USB diamita 5-10 mm |
| Yanayin aiki | Yanayin aiki: -30ºC…+50ºC Max. tsayi sama da matakin teku 2,000m Dangi zafi RH 100%
Ya dace da amfani na cikin gida da waje (an kare shi daga ruwan sama kai tsaye) |
| Ƙarar voltage | 9… 14 VDC
Amfanin wutar lantarki a yanayin ajiyar wuta kusan. 70 μA. Matsakaicin kusan. 100 μA idan ana aunawa da watsawa sau ɗaya a mako. |
| Fuse | 1 AT, IEC 127 5×20 mm |
| Amfanin wutar lantarki | max. 10 W |
| Analog shigarwar | 4 x 4…20 mA aiki ko m,
A1… A3 ƙuduri 13-bit. Shigar da A4, 10-bit. 24 VDC wadata, max 25 mA kowace shigarwa. |
| Abubuwan shigar dijital | 4 abubuwan shigarwa, 24 VDC |
| Abubuwan da aka fitar | 2 x SPDT, 250VAC/5A/500VA ko
24VDC/5A/100V |
| Canja wurin bayanai | Gina-in 2G, LTE, LTE-M, NB-IoT -modem |
| Ma'auni da tazarar watsa bayanai | Mai amfani yana daidaitawa da yardar kaina |
| EMC | EN IEC 61000-6-3
EN IEC 61000-6-2 (kariya) |
| JAN | EN 301
EN 301-908
EN 301-908 |
SANARWA TA EU NA DACEWA
Bayanin FCC
- Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
- Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, ƙarƙashin Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma yayi amfani da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Don biyan buƙatun bayyanar RF, mafi ƙarancin nisa na 20 cm dole ne a kiyaye tsakanin jikin mai amfani da na'urar, gami da eriya.
Takardu / Albarkatu
 |
Labkotec LC442-12 Labcom 442 Sashin Sadarwa [pdf] Manual mai amfani LC442-12 Labcom 442 Sashin Sadarwa, LC442-12, Labcom 442 Sashen Sadarwa, 442 Sashen Sadarwa, Sashen Sadarwa |
