Adam Cruiser Count Series Bench Counting Scale

Bayanin samfur

Sunan samfur: Adam Equipment Cruiser Count (CCT) SERIES
Gyaran software: V 1.00 & sama
Nau'in Samfura: CCT (Standard model), CCT-M (Ciniki yarda da model), CCT-UH (High ƙuduri model)
Raka'a Masu Aunawa: Pound, Gram, Kilogram
Siffofin: Bakin karfe na auna dandamali, ABS tushe taro, RS-232 bi-directional interface, real time Agogo (RTC), shãfe haske faifan maɓalli tare da launi lamba canza launi, LCD nuni tare da backlight, atomatik sifili tracking, m ƙararrawa ga pre-saitin kirga, atomatik tare, da aka riga aka saita tare, wurin tarawa don adanawa da tuno kirga a matsayin jimillar tara

Ƙayyadaddun bayanai

Model #	Matsakaicin Iya	Iya karantawa	Tare Range	Raka'a Ma'auni
Farashin CCT4	4000g ku	0.1 g	- 4000 g	g
Farashin CCT8	8000g ku	0.2 g	- 8000 g	g
Farashin CCT16	16 kg	0.0005 kg	- 16 kg	kg
Farashin CCT32	32 kg	0.001 kg	- 32 kg	kg
Farashin CCT48	48 kg	0.002 kg	- 48 kg	kg
CCT 4M	4000g ku	1g ku	- 4000 g	g, lb
CCT 8M	8000g ku	2g ku	- 8000 g	g, lb
CCT 20M	20 kg	0.005 kg	- 20 kg	kg, lb
CCT 40M	40 kg	0.01 kg	- 40 kg	kg, lb

JARIDAR CCT
Model #	Farashin CCT4	Farashin CCT8	Farashin CCT16	Farashin CCT32	Farashin CCT48
Matsakaicin Iya	4000g ku	8000g ku	16 kg	32 kg	48 kg
Iya karantawa	0.1 g	0.2 g	0.0005kg	0.001kg	0.002kg
Tare Range	- 4000 g	- 8000 g	- 16 kg	- 32 kg	- 48 kg
Maimaituwa (Std Dev)	0.2 g	0.4 g	0.001kg	0.002kg	0.004 kg
Linearity ±	0.3g ku	0.6g ku	0.0015 kg	0.0003 kg	0.0006 kg
Raka'a Ma'auni	g		kg

CCT-M SERIES
Samfura: CCT 4M

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
Grams	4000g ku	- 4000 g	1g ku	2g ku	3g ku
Fam	8lb	- 8 lb	0.002 lb	0.004 lb	0.007 lb

Samfura: CCT 8M

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
Grams	8000g ku	- 8000 g	2g ku	4g ku	6g ku
Fam	16 lb	- 16 lb	0.004 lb	0.009 lb	0.013 lb

Samfura: CCT 20M

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
kilogiram	20kg	- 20 kg	0.005 kg	0.01 kg	0.015 kg
Fam	44 lb	- 44 lb	0.011 lb	0.022 lb	0.033 lb

Samfura: CCT 40M

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
kilogiram	40kg	- 40 kg	0.01 kg	0.02 kg	0.03 kg
Fam	88 lb	- 88 lb	0.022 lb	0.044 lb	0.066 lb

CCT-UH SERIES
Saukewa: CCT8UH

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
Grams	8000g ku	- 8000 g	0.05g ku	0.1g ku	0.3g ku
Fam	16 lb	- 16 lb	0.0001 lb	0.0002 lb	0.0007 lb

Saukewa: CCT16UH

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
kilogiram	16 kg	- 16 kg	0.1g ku	0.2g ku	0.6g ku
Fam	35 lb	- 35 lb	0.0002 lb	0.0004 lb	0.0013 lb

Saukewa: CCT32UH

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
kilogiram	32 kg	- 32 kg	0.0002 kg	0.0004 kg	0.0012 kg
Fam	70 lb	- 70 lb	0.00044 lb	0.0009 lb	0.0026 lb

Samfura: CCT 48 UH

RAKA'O'IN AUNA	MANYAN WUTA	SAURARA RANAR	SANARWA	Maimaituwa	LAYYA
kilogiram	48 kg	- 48 kg	0.0005 kg	0.001 kg	0.003 kg
Fam	100lb	- 100 lb	0.0011 lb	0.0022 lb	0.0066 lb

BAYANI NA NAN

Lokacin Tsayawa	2 seconds na yau da kullun
Yanayin Aiki	-10°C – 40°C 14°F – 104°F
Tushen wutan lantarki	110 - 240vAC adaftar - shigarwa 12V 800mA fitarwa
Baturi	Batir mai caji na ciki (~ 90 hours aiki)
Daidaitawa	Waje ta atomatik
Nunawa	3 x 7 lambobi LCD nunin dijital
Daidaiton Gidaje	ABS Plastics, Bakin Karfe dandamali
Girman Pan	210 x 300 mm 8.3" x 11.8"
Gabaɗaya Girma (wxdxh)	315 x 355 x 110mm 12.4" x 14" x 4.3"
Cikakken nauyi	4.4 kg / 9.7 lb
Aikace-aikace	Ƙididdigar Ma'auni
Ayyuka	Ƙididdigar sassa, duba awo, tara ƙwaƙwalwar ajiya, ƙidayar da aka riga aka saita tare da ƙararrawa
Interface	RS-232 mai mu'amala mai kai-tsaye guda biyu Ingilishi, Jamusanci, Faransanci, rubutu mai zaɓin Sifen
Kwanan wata/Lokaci	Agogon Lokaci na Gaskiya (RTC), Don buga kwanan wata da bayanin lokaci (Kwanan kwanan wata / wata / rana, tsarin rana / wata / shekara ko tsarin wata / rana / shekara - Ana goyan bayan batirin)

Amfanin Samfur

Auna a Sampdon Ƙayyade Nauyin Raka'a

1. Sanya sample a kan dandalin awo.
2. Jira karatun ya daidaita.
3. Karanta kuma ku lura da nauyin da aka nuna, wanda ke wakiltar nauyin naúrar.

Shigar da Sanann Nauyin Raka'a

1. Danna maɓallan da suka dace don shigar da sanannun nauyin naúrar.
2. Tabbatar da ƙimar da aka shigar.

GABATARWA

• Jerin Cruiser Count (CCT) yana ba da ma'aunin ƙidayar daidai, sauri da ma'auni.
• Akwai nau'ikan ma'auni guda uku a cikin jerin CCT:
  1. CCT: Daidaitaccen samfura
  2. CCT-M: Samfuran da aka amince da ciniki
  3. CCT-UH: Samfuran ƙuduri masu girma
• Ma'aunin cruiser na iya yin awo a cikin raka'o'in awo, gram da kilogram. NOTE: Wasu raka'a an cire su daga wasu yankuna saboda hani da dokokin da ke tafiyar da waɗannan yankuna.
• Ma'auni suna da dandamali na auna bakin karfe akan taron tushe na ABS.
• Ana ba da duk ma'auni tare da RS-232 bi-directional interface da ainihin lokacin agogo (RTC).
• Ma'auni suna da faifan maɓalli mai hatimi tare da canza launi mai launi kuma akwai manyan nunin kristal 3 masu sauƙin karantawa (LCD). Ana ba da LCDs tare da hasken baya.
• Ma'auni sun haɗa da bin diddigin sifili ta atomatik, ƙararrawa mai ji don ƙididdige saiti, ta atomatik, riga-kafi tare, wurin tarawa wanda ke ba da damar adana ƙidayar kuma a tuna da shi azaman jimillar tarawa.

SHIGA

SANARWA MISALIN

	Kada a sanya ma'auni a wurin da zai rage daidaito Ka guji matsanancin zafin jiki. Kada a sanya a cikin hasken rana kai tsaye ko kusa da mashinan sanyaya iska.   Guji tebur marasa dacewa. Tebur ko bene dole ne ya kasance mai tsauri kuma kada ya girgiza Guji hanyoyin da ba su da ƙarfi. Kada kayi amfani kusa da manyan masu amfani da wutar lantarki kamar kayan aikin walda ko manyan injin.  Kada ku sanya kusa da injin girgiza. Guji zafi mai yawa wanda zai iya haifar da kumburi. Ka guji hulɗa da ruwa kai tsaye. Kada a fesa ko nutsar da ma'aunin cikin ruwa   Guji motsin iska kamar daga magoya baya ko buɗe kofofin. Kada ku sanya kusa da buɗe taga taga ko filayen kwandishan Tsaftace ma'auni. Kada a tara kaya akan ma'auni lokacin da ba a amfani da su

SHIGA CCT SACALES

• Jerin CCT ya zo tare da dandali na bakin karfe cushe daban.
• Sanya dandamali a cikin ramukan ganowa a saman murfin.
• Kar a latsa da ƙarfi fiye da kima saboda wannan zai iya lalata tantanin ɗauka a ciki.
• Matakin ma'auni ta hanyar daidaita ƙafafu huɗu. Ya kamata a daidaita ma'auni kamar yadda kumfa a cikin matakin ruhu ya kasance a tsakiyar matakin kuma ma'auni yana goyon bayan duk ƙafa huɗu.
• Kunna wuta ta amfani da maɓalli da ke gefen hagu na nunin nauyi.
• Ma'auni zai nuna lambar sake fasalin software na yanzu a cikin taga nunin "Nauyi", misaliampku V1.06.
• Na gaba za a yi gwajin kai. A ƙarshen gwajin kai, zai nuna "0" a cikin dukkan nunin guda uku, idan yanayin sifili ya kasance.

BAYANIN MUHIMMANCI

Maɓallai	Ayyuka
[0-9]	Maɓallan shigarwa na lamba, ana amfani da su don shigar da ƙima don ma'aunin tare, nauyin ɗaya, da sampda size.
[CE]	Ana amfani da shi don share nauyin naúrar ko shigar da kuskure.
[Bugu M+]	Ƙara ƙidaya na yanzu zuwa mai tarawa. Za'a iya ƙara ƙimar ƙimar 99 ko cikakken ƙarfin nunin nauyi. Hakanan yana buga ƙimar da aka nuna lokacin da aka kashe bugawa ta atomatik.
[MR]	Don tunawa da tara ƙwaƙwalwar ajiya.
[SETUP]	Ana amfani dashi don saita lokaci da sauran ayyukan saitin
[SMPL]	An yi amfani da shi don shigar da adadin abubuwan ciki kamarample.
[U.Wt]	An yi amfani da shi don shigar da nauyin kamarampda hannu.
[Tare]	Tares sikelin. Yana adana nauyin yanzu a ƙwaƙwalwar ajiya azaman darajar tare, yana rage darajar tare daga nauyi kuma yana nuna sakamakon. Wannan shine ma'aunin nauyi. Shigar da ƙima ta amfani da faifan maɓalli zai adana hakan azaman ƙimar tare.
[è0ç]	Yana saita maki sifili don duk awo na gaba don nuna sifili.
[PLU]	An yi amfani da shi don isa ga kowane ƙimar nauyin PLU da aka adana
[UNITS]	An yi amfani da shi don zaɓar sashin awo
[Duba]	An yi amfani da shi don saita ƙananan iyaka da Ƙarfafa don duba awo
[.]	Yana sanya maki goma akan nunin ƙimar ƙimar naúrar

5.0 NUNAWA

Ma'auni suna da tagogin nuni na dijital guda uku. Waɗannan su ne "Nauyi", "Nauyin Unit" da "Kirga inji mai kwakwalwa".
Yana da nuni mai lamba 6 don nuna nauyi akan sikelin.

Kibiyoyi na sama alamomi zasu nuna masu zuwa:

Alamar Cajin Jiha, kamar yadda yake sama Nunin Nauyi na Net, “Net” kamar yadda yake sama Alamar Ƙarfafawa, “Stable” ko alama  kamar yadda ke sama alamar sifili, “Zero” ko alama Kamar yadda a sama

NUNA NUNA NUNA 

• Wannan nuni zai nuna nauyin naúrar kamarample. Wannan ƙimar ko dai shigar ta mai amfani ne ko kuma an ƙididdige shi ta ma'auni. Za a iya saita naúrar ma'aunin zuwa gram ko fam dangane da yanki.
• [An gano rubutu]
• Idan an tara ƙidaya to alamar kibiya zata nuna ƙasa alamar .

COUNT NUNA 

Wannan nunin zai nuna adadin abubuwan da ke kan sikelin ko ƙimar ƙidayar da aka tara. Duba sashe na gaba akan OPERATION.
[share rubutu]

AIKI
KAFA RA'AYIN AUNA: g ko kg
Ma'aunin zai kunna nunin naúrar awo ta ƙarshe da aka zaɓa, ko dai gram ko kilogiram. Don canza naúrar awo danna maɓallin [Raka'a]. Don canza naúrar auna danna maɓallin [SETUP] kuma yi amfani da maɓallan [1] ko [6] don gungurawa cikin menu har sai 'raka'a' ya bayyana akan nuni. Danna [Tare] don zaɓar. A cikin nunin 'count pcs' za a nuna awo na yanzu [kalmar share] (kg,g ko lb) tare da 'kunna' ko 'kashe'. Danna [Tare] yin hawan keke ta cikin raka'o'in awo da ke akwai. Yi amfani da maɓallan [1] da [6] don canzawa tsakanin Kunnawa/Kashe da amfani da [Tare] maballin don zaɓar. Idan ya cancanta danna maɓallin [CE] don share nauyin naúrar kafin canzawa.

ZUBAR DA NUNA 

• Zaka iya latsa [] maɓalli a kowane lokaci don saita madaidaicin sifilin daga inda ake auna duk sauran aunawa da ƙidaya. Wannan yawanci zai zama dole ne kawai lokacin da dandamali ya zama fanko. Lokacin da aka sami sifili nuni nuni "Nauyi" zai nuna alamar sifili.
• Ma'auni yana da aikin sake sifili ta atomatik don yin lissafin ƙananan ɗigo ko tara kayan akan dandamali. Duk da haka kuna iya buƙatar danna [] don sake-sifili ma'auni idan an nuna ƙananan nauyin nauyi lokacin da dandalin ba shi da komai.

TARING 

• Zero ma'aunin ta latsa [] key idan ya cancanta. Alamar"” zai kasance ON.
• Sanya akwati a kan dandamali kuma za a nuna nauyin sa.
• Danna [Tare] to tare da sikelin. Ana adana nauyin nauyin da aka nuna azaman ƙimar tare wanda aka cire daga nuni, yana barin sifili akan nuni. Alamar "Net" zata kasance ON.
• Yayin da aka ƙara samfurin kawai za a nuna nauyin samfurin. Za a iya murɗa ma'aunin a karo na biyu idan za a ƙara wani nau'in samfur zuwa na farko. Bugu da ƙari, kawai nauyin da aka ƙara bayan taring zai nuna.
• Lokacin da aka cire akwati za a nuna ƙima mara kyau. Idan ma'auni ya kasance tare kafin cire akwati, wannan ƙimar ita ce babban nauyin gandun da cire duk wani samfuri. Alamar da ke sama"” Hakanan zai kasance ON saboda dandamali ya dawo daidai da yanayin da yake a lokacin [] an danna maɓalli a ƙarshe.
• Idan an cire duk samfurin yana barin akwati kawai akan dandamali, mai nuna alama "” Hakanan za'a kasance a yayin da dandalin ya dawo daidai da yanayin da yake a lokacin [] an danna maɓalli a ƙarshe.

Lissafin KYAU 

Saitin Nauyin Nau'in
Domin yin kirga sassa yana da muhimmanci a san matsakaicin nauyin abubuwan da za a ƙidaya. Ana iya yin haka ta hanyar auna sanannun adadin abubuwan da barin ma'auni ya ƙayyade matsakaicin nauyin naúrar ko ta shigar da sanannan nauyin naúrar da hannu ta amfani da faifan maɓalli.

Auna kamarampdon ƙayyade Nauyin Raka'a
Don ƙayyade matsakaicin nauyin abubuwan da za a ƙidaya, kuna buƙatar sanya adadin abubuwan da aka sani akan ma'auni da maɓalli a cikin adadin abubuwan da ake auna. Ma'auni zai raba jimlar nauyi ta adadin abubuwa kuma ya nuna matsakaicin nauyin naúrar. Danna [CE] kowane lokaci don share nauyin naúrar.

• Zero ma'aunin ta latsa [] key idan ya cancanta. Idan za a yi amfani da akwati, sanya akwati a kan ma'auni kuma tada ta latsa [Tare] kamar yadda aka tattauna a baya.
• Sanya adadin abubuwan da aka sani akan ma'auni. Bayan nunin nauyi ya tabbata, shigar da adadin abubuwa ta amfani da maɓallan lamba sannan danna maɓallin [Smpl].
• Za a nuna adadin raka'a akan nunin "ƙidaya" kuma za'a nuna matsakaicin nauyin ƙididdiga akan nunin "Unit Weight".
• Yayin da aka ƙara ƙarin abubuwa zuwa ma'auni, nauyi da yawa za su ƙaru.
• Idan adadin wanda ya fi sample an sanya shi a kan ma'auni, sannan ma'auni zai inganta nauyin Unit ta atomatik ta hanyar sake ƙididdige shi. Don kulle Nauyin Raka'a kuma kauce wa sakewaampling, latsa [U. Wt.].
• Idan ma'auni bai tsaya ba, lissafin ba zai ƙare ba. Idan nauyin yana ƙasa da sifili, nunin "ƙidaya" zai nuna ƙididdiga mara kyau.

Shigar da sanannen Nauyin Raka'a

• Idan an riga an san nauyin naúrar to yana yiwuwa a shigar da ƙimar ta amfani da faifan maɓalli.
• Shigar da ƙimar nauyin naúrar a cikin gram, ta amfani da maɓallan lamba ta hanyar latsa [U. Wt.] key. Nunin "Nauyin Unit" zai nuna ƙimar kamar yadda aka shigar dashi.
• A sampLe za a ƙara zuwa ma'auni kuma za a nuna nauyin da kuma adadin, dangane da nauyin naúrar.

Ƙididdigar ƙarin sassa 

• Bayan an ƙayyade nauyin naúrar ko shigar, yana yiwuwa a yi amfani da ma'auni don ƙidayar sassa. Ana iya haɗa ma'aunin don lissafin nauyin kwantena da aka ambata a sashe na 6.2.
• Bayan an haɗa ma'auni an ƙara abubuwan da za a ƙidaya kuma nunin "ƙidaya" zai nuna adadin abubuwan, da aka lissafta ta amfani da jimlar nauyin da nauyin naúrar.
• Yana yiwuwa a ƙara daidaiton nauyin naúrar a kowane lokaci yayin aikin kirgawa ta hanyar shigar da ƙidayar da aka nuna sannan danna maɓallin [Smpl]. Dole ne ku tabbata cewa adadin da aka nuna yayi daidai da adadin akan sikelin kafin latsa maɓallin. Ana iya daidaita nauyin naúrar bisa ga mafi girma sampda yawa. Wannan zai ba da daidaito mafi girma yayin kirga manyan sampda masu girma dabam.

 Sabunta nauyi ta atomatik 

• A lokacin lissafin nauyin naúrar (duba sashe na 6.3.1A), ma'auni zai sabunta nauyin naúrar ta atomatik lokacin daample kasa da sample riga a kan dandamali an ƙara. Za a ji ƙara lokacin da aka sabunta ƙimar. Yana da kyau a duba adadin daidai lokacin da aka sabunta nauyin naúrar ta atomatik.
• Ana kashe wannan fasalin da zaran adadin abubuwan da aka ƙara sun zarce adadin da aka yi amfani da su azamanample.

Duba awo 

• Bincika auna hanya ce don sa ƙararrawa ta yi sauti lokacin da adadin abubuwan da aka ƙirga akan sikelin ya hadu ko ya wuce lamba da aka adana a ƙwaƙwalwar ajiya ta amfani da maɓallin [check].
• Danna maɓallin [Duba] zai kawo "Lo" a cikin nunin nauyi, shigar da ƙimar lambobi ta amfani da lambobi akan faifan maɓalli sannan danna [Tare] shigar da maɓallin don tabbatarwa.
• Da zarar an saita darajar “Lo”, za a sa ka saita ƙimar “Hi”, tabbatar da hakan ta hanyar bin hanya ɗaya da ƙimar “Lo”.
• Sanya abu akan sikelin yanzu zai kawo alamar kibiya mai nuni zuwa ƙimar "Lo, Mid ko Hi" akan nunin.
• Don share ƙimar daga ƙwaƙwalwar ajiyar kuma don haka kashe fasalin auna cak, shigar da ƙimar "0" kuma danna [Tare].

Jimlar Tarin Hannu 

• Za'a iya ƙara ƙimar (nauyi da ƙirga) da aka nuna akan nuni zuwa ƙimar da ke cikin ƙwaƙwalwar ajiya ta latsa maɓallin [M+] idan an saita jimillar tarawa zuwa ON a cikin Menun Fitar. Nunin "Nauyi" zai nuna adadin lokuta. Za a nuna ƙimar na tsawon daƙiƙa 2 kafin su dawo daidai.
• Dole ne ma'auni ya koma sifili ko lambar mara kyau, kafin wani sampza a iya ƙara zuwa ƙwaƙwalwar ajiya.
• Ana iya ƙara ƙarin samfuran sannan kuma za a sake danna maɓallin [M+]. Wannan na iya ci gaba har zuwa shigarwar 99 ko har sai an wuce ƙarfin nunin "Nauyi".
• Don kiyaye jimlar ƙimar da aka adana, danna maɓallin [MR]. Jimlar za a nuna na 2 seconds. Wannan ya kamata a yi yayin da ma'auni ya kasance a sifili.
• Don share žwažwalwar ajiya- da farko latsa [MR] don tunawa da jimillar žwažwalwar ajiya sannan latsa maþallin [CE] don share duk darajoji daga žwažwalwar ajiya.

 Jimlar Taru ta atomatik 

• Ana iya saita ma'auni don tara jimlar ta atomatik lokacin da aka sanya nauyi akan ma'auni. Wannan yana kawar da buƙatar danna maɓallin [M+] don adana ƙima cikin ƙwaƙwalwar ajiya. Koyaya maɓallin [M+] yana aiki kuma ana iya dannawa don adana ƙimar nan take. A wannan yanayin ba za a adana ƙimar ba lokacin da ma'aunin ya koma sifili.
• Dubi Sashe na 9.0 akan Interface RS-232 don cikakkun bayanai kan yadda ake kunna Taruwa ta atomatik.

Shigar da ƙimar PLU
Ana amfani da lambobi Neman Samfur (PLU) don adana bayanai game da abubuwan da aka fi amfani da su. Yin amfani da CCT, ana iya adana ƙimar PLU azaman nauyin naúrar, bincika iyakokin ƙidayar ko duka tare. Ya kamata a shigar da ƙimar PLU ɗaya daidai da takamaiman abubuwa kafin a fara aikin auna don a iya tunawa da PLU ɗin da ake so yayin aikin auna. Mai amfani zai iya adanawa da tunawa har zuwa ƙimar PLU 140 (Pos 1 zuwa PoS 140) ta amfani da maɓallin PLU.

Don adana ƙima don maɓallin [PLU] cikin ƙwaƙwalwar ajiya bi hanyar:

1. Shigar da ƙimar nauyin naúrar ta amfani da faifan maɓalli ko yin ƙidayar sample. Shigar da kowane iyakokin ƙidayar CHECK wanda kuma za'a iya adana shi (duba sashe 6.3.4)
2. Danna maɓallin PLU sannan zaɓi ''Store'' ta amfani da lambobi [1] da [6] don canza zaɓin; da zarar an zaɓa danna maɓallin [Tare]. Nuni zai nuna ''PoS xx'' akan nunin ƙidaya.
3. Shigar da kowace lamba (0 har zuwa 140) don adana nauyin naúrar a matsayin da ake so. Domin misaliample, danna [1] da [4] don matsayi na 14. Zai nuna ''PoS 14'' Danna maɓallin [Tare] don ajiye shi.
4. Don canjawa zuwa ƙimar da aka ajiye a baya akan wata takamammen PLU, kawai maimaita aiwatar.

Amfani da Ƙimar PLU da aka Ajiya don Farashin Raka'a
Don tunawa da waɗannan ƙimar PLU waɗannan hanyoyin suna aiki:

1. Don tunawa da ƙimar PLU, danna maɓallin [PLU]. Nunin zai nuna ''recall'' idan ba danna lambobi [1] ko [6] don canza zaɓin sannan danna maɓallin [Tare] ba.
2. Da zarar an zaɓa, nuni zai nuna ''PoS XX akan nunin ƙidaya. Shigar da lamba (0 zuwa 140) kuma danna maɓallin [Tare] don tunawa da ƙimar da aka zaɓa.

Idan an ɗora abun a kan kwanon rufi, taga Count zai nuna adadin guda. Idan ba a ɗora komai ba, ƙimar nauyin naúrar da aka ajiye don wurin kawai za'a nuna a cikin taga Unit Weight kuma taga Count zai nuna ''0'' Idan kawai an duba iyakar nauyi to za su fara aiki lokacin da asusun s.ample a yi.

RADDEWA

YARDA IRIN OIML: Don ƙirar CCT-M, ana kulle gyare-gyare ko dai ta hanyar tsalle mai hatimi a ƙasan sikelin, ko ta ƙididdige ƙididdigewa akan nuni. Idan hatimin ya karye ko tamptare, ana buƙatar sake tantance ma'aunin ta wata hukuma mai izini da kuma sake hatimce ta, kafin a yi amfani da shi ta hanyar doka. Tuntuɓi ofishin ma'aunin awo na gida don ƙarin taimako.
Ana daidaita ma'aunin CCT ta amfani da ma'aunin awo ko fam dangane da yanki da naúrar da ake amfani da su kafin daidaitawa.
Kana buƙatar shigar da amintaccen menu ta shigar da lambar wucewa lokacin da aka nema.

• Danna [Tare] sau ɗaya, yayin ƙidayar farko na nuni bayan an kunna wuta.
• Nunin "ƙidaya" zai nuna "P" neman lambar wucewa.
• Tsayayyen lambar wucewa shine "1000"
• Danna [Tare] key
• Nunin "Nauyi" zai nuna "u-CAL"
• Danna [Tare] maɓalli kuma nunin "nauyin" zai nuna "babu kaya" don buƙatar cire duk nauyi daga dandamali.
• Danna [Tare] maɓalli don saita maki sifili
• Nunin zai nuna nauyin daidaitawa da aka ba da shawara a cikin nunin "ƙidaya". Idan ma'aunin daidaitawa ya bambanta da ƙimar da aka nuna, Danna [CE] don share ƙimar yanzu sannan shigar da madaidaicin ƙimar azaman ƙimar lamba, ba zai yuwu a sami ɓangarorin kilogram ko laban ba. Don Exampda:
  20kg = 20000
• Danna [Tare] don karɓar ƙimar daidaitawa kuma nunin "Nauyi" zai nuna yanzu "Load".
• Sanya nauyin daidaitawa a kan dandamali kuma ba da damar ma'auni ya daidaita kamar yadda mai nuna barga ya nuna.
•  Danna [Tare] da calibrate.
• Lokacin da aka yi gyare-gyaren ma'auni zai sake farawa kuma ya dawo zuwa awo na al'ada.
• Bayan daidaitawa, yakamata a duba ma'auni ko daidaitawar daidai ne. Idan ya cancanta, maimaita daidaitawa.

Ma'aunin gyare-gyaren da aka ba da shawarar don Jerin CCT:

Farashin CCT4	Farashin CCT8	Farashin CCT16	Farashin CCT32	Farashin CCT48
2 kg / 5 Ib	5 kg / 10 lb	10 kg / 30 lb	20 kg / 50 lb	30 kg / 100 lb

• Bayan daidaitawa, yakamata a duba ma'auni ko daidaitawa da layin daidai ne. Idan ya cancanta, maimaita daidaitawa.

NOTE: A wasu yankuna, ma'aunin CCT za su sami alamar lb ko kg akan, don nuna sashin nauyin da ake nema. Idan ma'aunin ya kasance cikin fam kafin fara daidaitawa, ma'aunin da ake nema zai kasance cikin kimar fam ko kuma idan ma'aunin yana yin awo a kilogiram to za'a nemi ma'aunin awo.

RS-232 INTERFACE

Ana ba da jerin CCT ɗin tare da kebul na USB da RS-232 mai haɗin kai. Ma'auni lokacin da aka haɗa shi da firinta ko kwamfuta ta hanyar haɗin RS-232, yana fitar da nauyi, nauyi da ƙidaya.

Ƙayyadaddun bayanai:

RS-232 fitarwa na bayanan auna
Lambar ASCII
Daidaitaccen ƙimar Baud, 600, 1200, 2400, 4800, 9600 da 19200 baud
8 data bit
Babu Daidaitawa

Mai haɗawa:
9 pin D-subminiature soket
Fitar 3 Fitowa
Fin 2 Input
Fin 5 Sigina Ƙasa
Ana iya saita ma'auni don buga rubutu cikin Ingilishi, Faransanci, Jamusanci ko Sifaniyanci. Bayanan za su ci gaba da fitowa a tsarin lakabi idan siga Label=A kunne. An kwatanta wannan tsari a ƙasa.

Tsarin bayanai-Fitarwa na al'ada: 

Tsarin Bayanai tare da Taruwa A: 

Danna maɓallin [MR] ba zai aika jimlar zuwa RS-232 ba lokacin da aka kunna ci gaba da bugawa. Ci gaba da bugawa zai kasance kawai don nauyi da bayanan nuni waɗanda ke yanzu.

Tsarin bayanai tare da Kashe Taruwa, tare da saitin Hi/Lo: 

• Ranar 7/06/2018
• Lokaci 14:56:27
• Lambar ID xxx
• ID mai amfani xxx
• Net Wt. 0.97 kg
• Tare Wt. 0.000kg
• Babban Wt 0.97kg
• Unit Wt. 3.04670 g
• Yankuna 32 pcs
• Babban iyaka 50PCS
• Ƙananan iyaka 20PCS
• Karba
• IN
• Ranar 7/06/2018
• Lokaci 14:56:27
• Lambar ID xxx
• ID mai amfani xxx
• Net Wt. 0.100 kg
• Tare Wt. 0.000kg
• Babban Wt 0.100kg
• Unit Wt. 3.04670 g
• Yankuna 10 pcs
• Babban iyaka 50PCS
• Ƙananan iyaka 20PCS
• KASA IYAKA
• LO
• Ranar 12/09/2006
• Lokaci 14:56:27
• Lambar ID xxx
• ID mai amfani xxx
• Net Wt. 0.100 kg
• Tare Wt. 0.000kg
• Babban Wt 0.100kg
• Unit Wt. 3.04670 g
• Yankuna 175 pcs
• Babban iyaka 50PCS
• Ƙananan iyaka 20PCS
• Sama da iyaka
• HI

Tsarin Bayanai Buga Kwafi 1, Kashe Taruwa: 

A wasu yaruka tsarin iri ɗaya ne amma rubutun zai kasance cikin yaren da aka zaɓa.

Bayani	HAUSA	FRANCE	JAMUN	Spanish
Buga babban nauyi	Babban Wt	Pds Brut	Brut-Gew	Sunan Brut
Cikakken nauyi	Net Wt.	Pds Net	Net-Gew	Pso Net
Tare nauyi	Tare Wt.	Pds Tare	Tare-Gew	Pso Tare
An ƙidaya nauyi a kowace raka'a	Naúrar Wt.	Naúrar Pds	Gew/Einh	Pso/Unid
Adadin abubuwan da aka ƙidaya	PCs	PCs	Stck.	Piezas
Adadin ma'auni da aka ƙara zuwa ƙananan jimla	A'a.	A'a.	Anzhl	Lissafi.
Jimlar nauyi da ƙirga da aka buga	Jimlar	Jimlar	Gesamt	Jimlar
Ranar bugawa	Kwanan wata	Kwanan wata	Datum	Fecha
Lokacin bugawa	Lokaci	Heure	Zait	Hora

SIFFOFIN UMURNIYAR SHIGA
Ana iya sarrafa sikelin tare da waɗannan umarni masu zuwa. Dole ne a aika umarnin a cikin manyan haruffa, watau “T” ba “t” ba. Danna maɓallin Shigar da PC bayan kowane umarni.

T	Yana nuna ma'auni don nuna nauyin gidan yanar gizo. Wannan daidai yake da dannawa [Tare]  key.
Z	Yana saita maki sifili don duk awo na gaba. Nunin yana nuna sifili.
P	Yana buga sakamakon zuwa PC ko firinta ta amfani da RS-232 interface. Hakanan yana ƙara ƙima zuwa ƙwaƙwalwar ajiya idan ba'a saita aikin tarawa zuwa atomatik ba. A cikin CCT jerin, da [Bugu] maɓalli zai ko dai buga abubuwan da ake ƙidaya na yanzu ko kuma sakamakon ƙwaƙwalwar ajiyar idan [M+] ana danna farko.
R	Tuna da Buga- Daidai kamar dai na farko [MR] mabudi sannan sai [Bugu] an danna maɓalli. Zai nuna tarin ƙwaƙwalwar ajiya na yanzu kuma ya buga jimlar sakamakon.
C	Daidai da dannawa [MR] na farko sannan kuma [CE] maɓalli don goge ƙwaƙwalwar ajiya na yanzu.

MASU AMFANI DA KYAUTA

Domin samun dama ga sigogin mai amfani danna maɓallin [SETUP] kuma yi amfani da lambobi [1] da [6] don gungurawa cikin menu da [Tare] ↵ don shigar da sigogi; sannan a sake amfani da lambobi [1] da [6] don gungurawa kuma zaɓi zaɓinku.

Siga	Bayani	Zabuka		Saitin tsoho
Lokaci	Saita Lokaci (duba babi 9)	Shigar da lokacin da hannu.		00:00:00
Kwanan wata	Saita tsarin kwanan wata da saituna. (duba babi na 9)	Shigar da tsarin kwanan wata sannan ƙimar lamba da hannu. mm:dd: yi dd:mm: yi:mm:dd		dd:mm: yi
bL	Saita sarrafa hasken baya	KASHE a AUTO	haske launi kore low amber tsakiyar ja) babba	AUTO Green tsakiyar
Ƙarfi	A kashe ko saita karin lokaci don kashe sikelin	1 2 5 10 15 Kashe		KASHE
Maɓalli bp	Saitunan ƙarar maɓalli	A Kashe		On
Chk bp	Duba ma'aunin sautin ƙararrawa	A - iyaka Fita - iyaka A kashe		In
Naúrar	Danna maɓallin [Naúrar] don canzawa daga g (kunna/kashe) zuwa kg ON/KASHE)	g/Kg akan g/Kg kashe	ko lb / lb:oz A kan lb / lb:oz kashe	g/kg da
Tace	Tace saitin da sample	Mafi Saurin Hankali A hankali	daga 1 zuwa 6	Mai sauri	4
Auto-Z	Saitunan sifili ta atomatik	0.5 1 1.5 2 2.5 3 Kashe		1.0
Rs232	RS232 menu: Buga PC	Buga zaɓuɓɓuka: 4800 don saita ƙimar baud - yi amfani da lambobi [1] da 6] don zaɓar daga zaɓuɓɓukan: 1200/2400/4800/9600/19200/38400/57600/115200. Turanci - don saita harshe (Ingilishi, Faransanci, Sifen, Jamusanci, Italiyanci, Fotigal)		4800 Turanci

		AC KASHE -don zaɓar zaɓi na tarawa da hannu ko kashe (AC KASHE / AC ON) Manual -zabar ta hanyar fitarwa ATP - Nau'in firinta (ATP/LP 50) Kwafi 1: zaɓi adadin kwafi (1-8) Comp : layukan da yawa ko Zuciya: sauki - layi daya LF/CR- ciyarwar layi da komawar karusa zuwa takardar firinta (layi 0-9) Zaɓuɓɓukan PC: 4800 - don saita ƙimar baud - yi amfani da lambobi [1] da [6] don zaɓar daga zaɓuɓɓuka: 1200/2400/4800/9600/19200/38400/57600/115200. Adamu - don haɗawa da software na Adam DU (amfani da lambobi [1] da [6] don zaɓar tsakanin zaɓin 'cbk' ko 'nbl') int (tazara) - zaɓi tazarar dakika ɗaya don aika bayanai zuwa PC (0, 0.5, 1, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6)	AC KASHE Farashin ATP Kwafi 1 Comp 1 LFCr 4800 Int 0
uSB	uSB menu	PC- daidai da rs 232 Buga - daidai da rs232
S-id	Saita ID na Sikeli	Don shigar da shi da hannu	000000
U-id	Saita ID mai amfani	Don shigar da shi da hannu	000000
RECHAR	Yana nuna cajin baturi	Ba tare da adaftan ba – yana nuna batir voltage Tare da adaftan yana nuna cajin halin yanzu (mA)	–

BATIRI 

• Za a iya sarrafa sikelin daga batir, idan ana so. Rayuwar batir kusan awa 90 ce.
• Alamar halin caji tana nuna s ukutage.
• Don cajin baturi, kawai toshe ma'auni a cikin mains kuma kunna wutar lantarki. Ma'auni baya buƙatar kunnawa.
• Ya kamata a yi cajin baturi na akalla sa'o'i 12 don cikakken iya aiki.
• Idan ba a yi amfani da baturin yadda ya kamata ba ko kuma ana amfani da shi tsawon shekaru masu yawa, ƙila a ƙarshe ya gaza ɗaukar cikakken caji. Idan rayuwar baturi ta zama ba abin karɓa ba to tuntuɓi mai kawo kaya.

KUSKUREN KODA

A lokacin gwajin wutar lantarki na farko ko lokacin aiki, ma'auni na iya nuna saƙon kuskure. An bayyana ma'anar saƙonnin kuskure a ƙasa. Idan an nuna saƙon kuskure, maimaita matakin da ya haifar da saƙon, kunna ma'auni, aiwatar da daidaitawa ko wasu ayyuka. Idan har yanzu ana nuna saƙon kuskure tuntuɓi dilan ku don ƙarin tallafi.

KUSKUREN KODE	BAYANI	DALILAN DA AKE IYAWA
Kuskure 1	Kuskuren shigar da lokaci.	Kokarin saita lokacin haram, watau sa'o'i 26
Kuskure 2	Kuskuren shigar da kwanan wata	Ƙoƙarin saita kwanan wata ba bisa ka'ida ba, watau rana ta 36
Tl.zl	Kuskuren kwanciyar hankali	Sifili a kan wuta ba barga
Kuskure 4	Zero na farko ya fi izini (yawanci 4% na matsakaicin iya aiki) lokacin da aka kunna wuta ko lokacin da [Zero] key ya danna,	Nauyi yana kan kwanon rufi lokacin kunna ma'auni. Yawan nauyi a kan kaskon lokacin da zazzage ma'auni. Daidaiton ma'auni mara kyau. Lalacewar tantanin halitta. Lalacewar Lantarki.
Kuskure 5	Kuskuren Zeroing	Sake kunna ma'auni don saita sifili
Kuskure 6	Ƙididdiga A/D bai yi daidai ba lokacin kunna ma'auni.	Ba a shigar da dandamali ba. Lalacewar Tantanin Jiki. Lalacewar Lantarki.
Kuskure 7	Kuskuren kwanciyar hankali	Ba za a iya nauyi har sai barga
Kuskure 9	Kuskuren daidaitawa	Ƙimar mai amfani yana waje da izinin haƙuri don sifili
Kuskure 10	Kuskuren daidaitawa	Ƙimar mai amfani yana waje da izinin haƙuri don daidaitawa
Kuskure 18	Kuskuren PLU	Naúrar nauyi na yanzu bai dace da naúrar PLU ba, ba zai iya karanta PLU ba
Kuskure 19	An saita iyakacin nauyi mara daidai	Ƙarƙashin nauyi mafi girma fiye da babba iyaka
Kuskure 20	Farashin 140	PLU ajiya/ karantawa ya fi 140
Ku ADC	Kuskuren guntu ADC	Tsarin ba zai iya samun guntun ADC ba
–OL–	Kuskuren kayatarwa	Nauyi sama da iyaka
–LO-	Kuskuren ƙarancin nauyi	-20 rabo daga sifili shi ba a yarda

12.0 SASHE GABATARWA DA KYAUTA
Idan kana buƙatar yin odar kowane kayan gyara da na'urorin haɗi, tuntuɓi mai kaya ko Kayan Aikin Adam.

Jerin ɓangaren irin waɗannan abubuwan sune kamar haka: 

• Igiyar wutar lantarki
• Batirin Maye gurbin
• Bakin Karfe Pan
• Murfin da ake amfani da shi
• Printer, da sauransu.

BAYANIN HIDIMAR

Wannan jagorar ya ƙunshi cikakkun bayanai na aiki. Idan kuna da matsala tare da sikelin da ba a magana kai tsaye ta wannan littafin to tuntuɓi mai ba ku don taimako. Domin ba da ƙarin taimako, mai siyarwar zai buƙaci bayanan da ke gaba waɗanda ya kamata a shirya:

Cikakkun bayanan kamfanin ku -
Sunan kamfanin ku:
Sunan mutum:-
Tuntuɓi tarho, e-mail, fax
ko wata hanya:

Cikakkun bayanai na naúrar da aka saya
(Ya kamata wannan ɓangaren bayanin ya kasance koyaushe don kowane wasiƙa na gaba. Muna ba da shawarar ku cika wannan fom da zaran an karɓi naúrar kuma ku ajiye bugu a cikin rikodinku don shirye-shiryen tunani.)

Sunan samfurin ma'auni:	CCT
Serial number na rukunin:
Lambar bita na software (Ana nunawa lokacin da aka fara kunna wuta):
Ranar Sayi:
Sunan mai siyarwa da wuri:

Takaitaccen bayanin matsalar
Haɗa kowane tarihin kwanan nan na rukunin.

Don misaliampda:

• Shin yana aiki tun lokacin da aka kawo shi
• Shin ya kasance yana hulɗa da ruwa
• Ya lalace daga gobara
• Guguwar Lantarki a yankin
• Sauke a ƙasa, da sauransu.

BAYANIN GARANTI

Adam Equipment yana ba da Garanti mai iyaka (Sassan da Aiki) don abubuwan da suka gaza saboda lahani a cikin kayan ko aiki. Garanti yana farawa daga ranar bayarwa. A lokacin garanti, idan duk wani gyara ya zama dole, mai siye dole ne ya sanar da mai siyarsa ko Kamfanin Kayan Aikin Adam. Kamfanin ko ƙwararrensa mai izini yana da haƙƙin gyara ko maye gurbin abubuwan da aka gyara a kowane taron bitarsa ​​dangane da tsananin matsalolin. Koyaya, duk wani kaya da ke da hannu wajen aika raka'a ko sassa marasa kuskure zuwa cibiyar sabis ya kamata mai siye ya ɗauka. Garanti zai daina aiki idan ba a dawo da kayan aiki a cikin marufi na asali ba kuma tare da ingantattun takaddun don da'awar da za a sarrafa. Duk da'awar suna bisa ga ikon Adam Equipment. Wannan garantin baya ɗaukar kayan aiki inda lahani ko rashin aikin yi ya kasance saboda rashin amfani, lalacewa mai haɗari, fallasa ga kayan rediyo ko lalata, sakaci, shigarwa mara kyau, gyare-gyare mara izini ko ƙoƙarin gyarawa ko gazawar kiyaye buƙatu da shawarwari kamar yadda aka bayar a cikin wannan Jagorar Mai amfanin. . Bugu da ƙari, batura masu caji (inda aka kawo) ba a rufe su ƙarƙashin garanti. Gyaran da aka yi ƙarƙashin garanti baya tsawaita lokacin garanti. Abubuwan da aka cire yayin gyaran garanti sun zama mallakin kamfani. Wannan garantin ba ya shafar haƙƙin doka na mai siye. Sharuɗɗan wannan garanti suna ƙarƙashin dokar Burtaniya. Don cikakkun bayanai kan Bayanin Garanti, duba sharuɗɗan siyarwa da ke kan mu website. Ba za a iya zubar da wannan na'urar a cikin sharar gida ba. Wannan kuma ya shafi kasashen da ke wajen EU, bisa takamaiman bukatunsu. Zubar da batura (idan an haɗa) dole ne ya dace da dokokin gida da ƙuntatawa.

FCC / IC CLASS A DIGITAL LABARI EMC TABBATARWA
NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class A, bisa ga Sashe na 15 na dokokin FCC da tsarin ICES-003/NMB-003 na Kanada. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa lokacin da ake sarrafa kayan aiki a cikin yanayin kasuwanci. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma aka yi amfani dashi daidai da littafin koyarwa, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Yin aiki da wannan kayan aiki a cikin wurin zama yana iya haifar da tsangwama mai cutarwa wanda idan mai amfani zai buƙaci ya gyara tsangwamar da kuɗin kansa.

SHARI'AR CALIFORNIA 65 - MAGANAR WAJIBI
GARGADI: Wannan samfurin ya haɗa da baturin gubar-acid ɗin da aka rufe wanda ya ƙunshi sinadarai da aka sani ga Jihar California don haifar da ciwon daji da lahani na haihuwa ko wasu lahani na haihuwa.

• An gwada samfuran kayan aikin Adam, kuma koyaushe ana ba su tare da maƙallan wutar lantarki waɗanda ke cika duk buƙatun doka don ƙasar da aka yi niyya ko yankin aiki, gami da amincin lantarki, tsangwama da ingancin makamashi. Kamar yadda muke yawan sabunta samfuran adaftar don saduwa da canjin doka ba zai yiwu a koma ga madaidaicin samfurin a cikin wannan littafin ba. Da fatan za a tuntube mu idan kuna buƙatar takamaiman bayani ko bayanan aminci don takamaiman abu. Kada ku yi ƙoƙarin haɗawa ko amfani da adaftan da ba mu da shi.

ADAM EQUIPMENT is ISO 9001: 2015 bokan kamfani na duniya tare da ƙwarewar shekaru fiye da 40 a cikin samarwa da siyar da kayan aikin lantarki.
An tsara samfuran Adam galibi don Laboratory, Education, Health and Fitness, Retail and Industrial Segments. Za a iya kwatanta kewayon samfurin kamar haka:

•  Ma'auni na Nazari da Madaidaicin Laboratory
• Karamin ma'auni mai ɗaukar nauyi
• Ma'auni Mai Girma
• Masu nazarin danshi / ma'auni
• Ma'aunin Injini
• Ƙididdigar Ma'auni
• Ma'aunin Ma'aunin Dijital/Duba-Auna
• Ma'auni na Platform mai girma
• Ma'aunin crane
• Makani da Dijital Lafiya da Ma'aunin Jiyya
• Ma'auni na Kasuwanci don ƙididdige farashi

Don cikakken lissafin duk samfuran Adamu ziyarci mu websaiti a www.adamequipment.com

Adam Equipment Co., Ltd.
Maid Stone Road, Kingston Milton Keynes
MK10 0BD
UK
Waya:+44 (0) 1908 274545
Fax: +44 (0) 1908 641339
e-mail: sales@adamequipment.co.uk

Adam Equipment Inc. girma
1, Fox Hollow Rd., Oxford, CT 06478
Amurka
Waya: +1 203 790 4774 Faksi: +1 203 792 3406
e-mail: sales@adamequipment.com

Adam Equipment Inc. girma
1, Fox Hollow Rd., Oxford, CT 06478
Amurka
Waya: +1 203 790 4774
Fax: +1 203 792 3406
e-mail: sales@adamequipment.com

Adam Equipment (SE ASIA) PTY Ltd.
70 Miguel Road
Tafkin Bibra
Perth
WA 6163
Yammacin Ostiraliya
Waya: +61 (0) 8 6461 6236
Fax: +61 (0) 8 9456 4462
e-mail: sales@adamequipment.com.au

AE Adam GmbH.
Instenkamp 4
D-24242
Jamus
Waya: +49 (0) 4340 40300 0
Fax: +49 (0) 4340 40300 20
e-mail: vertrieb@aeadam.de

Adam Equipment (Wuhan) Co. Ltd.
Ginin Gabashin Jianhua
Wurin shakatawa mai zaman kansa Zhuanyang Avenue
Yankin Cigaban Tattalin Arziki da Fasaha na Wuhan
430056 Wuhan
PRChina
Waya: + 86 (27) 59420391
Fax: + 86 (27) 59420388
e-mail: info@adamequipment.com.cn
© Haƙƙin mallaka na Adam Equipment Co. Duk haƙƙin mallaka. Ba wani ɓangare na wannan ɗaba'ar da za'a iya sake bugawa ko fassara ta kowace hanya ko ta kowace hanya ba tare da izinin Adam Equipment ba.
Adam Equipment yana da haƙƙin yin canje-canje ga fasaha, fasali, ƙayyadaddun bayanai da ƙirar kayan aikin ba tare da sanarwa ba. Duk bayanan da ke cikin wannan ɗaba'ar sun kasance gwargwadon iliminmu akan lokaci, cikakke kuma daidai lokacin da aka fitar. Koyaya, ba mu da alhakin fassarori marasa kuskure waɗanda zasu iya haifar da karatun wannan abu. Ana iya samun sabon sigar wannan ɗaba'ar akan mu Website. www.adamequipment.com
Equ Kamfanin Kayan Kayan Adam na 2019

Takardu / Albarkatu

Adam Cruiser Count Series Bench Counting Scale [pdf] Jagorar mai amfani Jerin Lissafin Cruiser, Sikelin Ƙididdigar Cruiser, Sikelin Ƙididdigar Bench, Sikelin Ƙididdigar Bench, Sikelin Ƙididdigar, Sikeli

Magana

• Manual mai amfani