I-Linear Gate Openers CW-SYS Inzwa Yokuphuma Okungenantambo EneManuwali Yemiyalo Yokulungisa Ukuzwela

YINI ESEBHOKISINI

1. I-SENSOR “PUCK”
   
2. I-INTEGRATOR
   
3. IZIKULI ZE-AUGER (2)
   
4. AMABHATHRI E-CR123A ANEZIKOLIphu ZEBHATHRI (2)
   
5. 3' (1 m.) IKHABULA EYI-COAXIAL
   
6. TERMINAL BLOCK SCREWDRIVER
   

NGOKUZITHANDELA

• 12VDC ugesi

(Ingxenye #CW-PSU)

INOMBOLO YOMKHIQIZO

Kukhona inombolo ye-serial yebhakhodi ngemuva kwe-Integrator, phansi kwe-puck, nasebhokisini lomkhiqizo. Uma ushaya ucingo ukuze ukhulume ngomkhiqizo wakho, sicela ube neyodwa yalezi zinombolo eduze.

UKUFAKA AMABHATHRI/IBHATHI ELIPHANSI

1. Sebenzisa I-CR123A amabhethri futhi ufanise i-polarity netheminali yebhethri ku-puck.
2. Uma amabhethri efakwa emuva, ngeke axhumane.
3. Phusha amabhethri endaweni ngokugcwele ukuze uxhumane.
4. Qhafaza isibambi sebhethri lepulasitiki phezu kwebhethri ngalinye futhi ungene kutheminali yebhethri.
5. Inzwa izozinika amandla ngokuzenzakalela uma amabhethri efakiwe.

IBHATHRI ELIPHANSI

Uma amabhethri edinga ukushintshwa ngenzwa, i-Integrator "izotshiyoza" futhi i-LED yayo izocwayiza NGOKUBOMVU.
Uma uxhume okokufaka kwendawo yesistimu yangaphandle (bona #10 ngezansi), hlela lokho okufisayo ukuze ubonise ibhethri eliphansi.

buyisela esikhundleni ZOMBILI AMABHATHRI.
UNGASEBENZISI OKUSHAJWAYO.

UKUQONDA

UHLELO LAKHO LUBHANGIWE EMKHATHINI.
LEZI ZINKONDLO ZISEBENZA UMA UMABHANISA AMAUYU ENGEZIWE

Ungamatanisa amapukhi afika kwayi-10 nenombolo engenamkhawulo yezihlanganisi

1. Sondeza inzwa ku-Integrator futhi unike amandla i-Integrator (bona #10 ngezansi).
2. Cindezela inkinobho yokumatanisa ku-Integrator (izohlala kumodi yokumatanisa imizuzu engama-30).
3. Yehlisa futhi unike amandla inzwa ngokukhipha futhi ufake kabusha ibhethri elilodwa (bona #3 ngenhla).
   
4. I-Integrator izokhala izikhathi ezingu-3 uma ibhangqwe futhi iphume ngokuzenzakalela kumodi yokumatanisa.

NGENJONGO	EMHLABENI	ENDLELENI
	Beka ilogo ngokuhambisana nokushayela Beka ngaphansi nje kwendawo• Izikulufu ze-auger puck evikelekile Ungasivali isivalo se-puck• Pakisha ukungcola/utshani nxazonkephukha Gcina isivalo se-puck sihlanzekile

ISEXWAYISO: GCINA ISIVIKELO SINGANGCOLILE, Utshani, IKHEphu, NONKE AMADOTI NGASO ZONKE IZIKHATHI UKUZE UVUMELE ISIGNALI SOMSAKAZO UKUBA SIDLALISE!

INDLELA YOKUHLOLA YE-SENSOR PUCK

Imodi yokuhlola ivumela i-sensor puck ukuthi idlulisele isignali yomsakazo ngokuzenzakalelayo ngaphandle kokuthi ikhube inzwa ngemoto. Lokhu kuwusizo lapho uhlola ububanzi besignali yomsakazo (bona #6 ngezansi).

1. Cindezela bese UBAMBA inkinobho ku-sensor puck imizuzwana emi-2
2. I-LED ebomvu izocwayiza njalo ngesekhondi uma ikumodi yokuhlola
3. Kuzoba khona ukudluliselwa ngokushesha
4. Ukudluliselwa okwengeziwe kuzokwenzeka njalo ngemizuzwana eyi-10
5. Imodi yokuhlola izophuma uma inkinobho icindezelwa futhi imizuzwana emi-2
6. Imodi yokuhlola izophuma ngokuzenzakalelayo ngemva kwemizuzu engama-30
   

UBANZI LOKUHLOLA

Isistimu yakho inobubanzi bomsakazo okungenani obungamafidi angama-350 noma ngaphezulu kuka-1000' womugqa wokubona.
Ukuze unqume ububanzi kuhlelo lwakho lokusebenza, hlola ngaphambi kokufaka kokugcina.
Ibanga lomsakazo lincike eziguquguqukayo eziningana:

• I-puck ifakwa kanjani (emhlabathini noma ngaphezulu kweposi)
• Izithiyo ezivimba isignali yomsakazo, njengenhlabathi, izihlahla, amapulangwe, izakhiwo, ukhonkolo, njll.

Ukuze uhlole ububanzi:

1. Beka i-Integrator eduze kwendawo yayo yokugcina yokufaka ekhaya noma esangweni.
2. Uzodinga ukuqinisekisa ukuthi Isididiyeli siyazwakala (bona #9 ngezansi).
3. Faka inzwa kumodi yebanga lokuhlola (bona #5 ngenhla).
4. Lalela i-Integrator ukuze icuphe. Uma ingenzeki, sondeza inzwa ku-Integrator.
5. Qiniseka ukuthi uhlola futhi nge-puck efakwe emhlabathini (bona #8 ngezansi).
6. Ungase udinge ukwengeza isiphindaphinda ngaphakathi kwekhaya (bona #9 ngezansi).

UKUBEKA UKUZWAKALA

LUNGISA (OKUPHANSI) KUPHELA UKUZWAKAZWA UMA UFAKA PHAKATHI NONDLELA YOKUSHAYELA (bona #8 ngezansi). KUZO zonke ezinye izimo SEBENZISA OKUFANELE.

UKULUNGISWA KOBUZWA
PHEZULU (Okuzenzakalelayo) Ithola imoto ehamba 5 MPH 12-14' away1 & 2 endaweni OFF
OKUPHAKATHI Ithola imoto ehamba 5 MPH 6-8' kude1 IVULIWE & 2 OFF
PHANSI Ithola imoto ehamba 5 MPH 2-4' away1 & 2 endaweni ON

QAPHELA: UKUzwela OKUPHEZULU KUNAMASHISHI E-DIP KU-OSITION YOKUVALA

IFAKA I-SENSOR PUCK

ISEXWAYISO: IZIMBOBO ZESIKWEPHU KU-PUCK ZIZOHLUPHA. UNGAQINISI KAKHULU NGESIKULUVA NGESIBHAMU NOMA UNGENA FUTHI UPHUMELE KANINGI. UMA IZIKURU ZINIKIWE, THENGA IZIKURU ZEZINSIMBI EZINGADLA ESIDE, EZIFANELE IPLASTIKI.

I-sensor puck ingafakwa ku-driveway, emhlabathini noma entweni enganyakazi (iposi, isihlahla, njll.).

NGENJONGO (bheka umfanekiso ngezansi kwesokunxele)

1. Uma ububanzi buhloliwe (bona #6 ngenhla), sivale isihlalo ngokuvikelekile ku-puck enezikulufu ezinikeziwe. Akufanele kube negebe phakathi kwesivalo ne-puck. Qaphela ukuthi ungakhumuli izikulufo ngesibhamu esiyisikulufa. Qeda ukuqinisa ngesandla.
2. Thola isihlahla, iposi, noma enye into ngqo eceleni komgwaqo.
3. Qiniseka ukuthi into AYI-MMOVABLE noma kuzovela ama-alamu angamanga.
4. Sebenzisa izimbobo kumathebhu angezansi ukuze ujike i-puck entweni.

EMHLABENI (bheka umfanekiso ngezansi kwesokunxele)

1. Uma ububanzi buhloliwe (bona #6 ngenhla), sivale isihlalo ngokuvikelekile ku-puck enezikulufu ezinikeziwe. Akufanele kube negebe phakathi kwesivalo ne-puck. Qaphela ukuthi ungakhumuli izikulufo ngesibhamu esiyisikulufa. Qeda ukuqinisa ngesandla.
2. Thola indawo ngqo eduze kwe-driveway.
3. Bamba umgodi omkhulu ngokwanele wezikulufu ze-puck ne-auger, uvumele isivalo se-puck sibe sezingeni elinokungcola okungaphezulu.
4. Vikela i-puck emhlabathini ngezikulufu ze-auger, amathebhu angaphansi agqagqene we-puck.
   Uma wehluleka ukuvikela i-puck, abagunda utshani, njll. bazoyidonsa/bayimunce.
5. Iphakethe kanye ne-tamp ukungcola okuzungeze i-puck, ukuqinisekisa ukuthi isivalo sihlanzekile kukungcola nayo yonke imfucumfucu.

EKUBEKELWENI OKUPHUMA KWAMAHHALA, UMA IZILWANE NOMA ABANTU ABANYATHELA I-SENSOR PUCK EFAKWE EMHLABENI, INGASE ILIHLELE Isango UKUZE LIVULEKE. CABANGA UKUFAKA EMTHUSI NOMA KU-DRIVEWAY ESIKHUNDLENI.

ENDLELENI (bheka umfanekiso ngezansi kwesokunxele)

1. Uma ububanzi buhloliwe (bona #6 ngenhla), sivale isihlalo ngokuvikelekile ku-puck enezikulufu ezinikeziwe. Akufanele kube negebe phakathi kwesivalo ne-puck. Qaphela ukuthi ungakhumuli izikulufo ngesibhamu esiyisikulufa. Qeda ukuqinisa ngesandla.
   Qaphela: Uma useduze nethrafikhi enqamulayo, cabanga ukwehlisa ukuzwela (bona #7 ngenhla)
2. Sebenzisa isaha yembobo yamatshe engu-4.5″ ububanzi ukuze ubhoboze imbobo ye-puck. Ibhoboze okungenani u-2.75” ukujula ngakho-ke isivalo se-puck sizoba ngu-1/4″ ngaphansi komgwaqo oshayelayo (ngakho-ke asikwazi ukudonswa amageja eqhwa, ama-grater, njll.).
3. Thela i-loop sealant emgodini, qaphela ukuthi ungagcwalisi ngokweqile, bese ufaka i-puck emgodini.
4. Bamba i-puck phansi ngesisindo kuze kube yilapho i-sealant iqina.
5. UNGATHOLOZI isivalo se-puck noma abaphathi ukuze uthole ukufinyelela kumabhethri.

IZISHINTSHI ZE-DIP EYI-INTEGRATOR

Amaswishi e-Dip alawula imodi yomsindo nephindaphinda ku-Integrator.

UMSINDO
Vula i-dip switch 1 ukuze uvule i-sounder.
I-Sounder izokhala izikhathi ezi-3 lapho imoto itholwa. Izophinda "itshiyoze" uma amabhethri enzwa ephansi futhi edinga ukushintshwa.

INDLELA YOKUPHINDA
Vula i-dip switch 2 ukuze uvule i-Integrator ibe yiphindaphinda. Kumodi yokuphinda, iyunithi izohlala yamukela futhi iphinda noma iyiphi isignali kusuka kunzwa kuya ku-Integrator efakwe ekhaya (bona #11 ngezansi). I-LED ebomvu neluhlaza okwesibhakabhaka izocwayiza ngokushintshana nangokuqhubekayo kumodi yokuphinda.

IFAKA ISIHLANGANISI

Isistimu yakho ihlanganisa kalula nanoma iyiphi isistimu yezokuphepha/HA noma i-opharetha yesango likagesi. Ukuze uhlanganise, sebenzisa izikimu zezintambo ezilandelayo njengemihlahlandlela:

IZINHLELO ZOKUPHEPHA/ZEKHAYA EZENZAKALELAYO

I-Integrator isebenzisa i-8-24 VAC noma i-8-30 VDC. Sebenzisa isistimu yezokuphepha/HA noma u-opharetha wesango ukuze unike amandla noma usebenzise noma yikuphi ukunikezwa kwamandla kwe-12VDC. I-Cartell ithengisa ukunikezwa kwamandla ongawakhetha (Ingxenye #CW-PS).

KUMELE WENZE UKUPHEPHA ESANGENI UMA USEBENZISA I-CW-SYS UKUPHUMA KWAMAHHALA.

NGOKUZENZAKALELAYO ISANGO

TERMINAL YOKUPHUMA EZIMBILI

TERMINAL YOKUPHUMA OKUNYE

INDLELA YOKUPHINDA

Ukwandisa ububanzi bomsakazo, kungase kudingeke wenze i-Integrator iphindaphinde.
Uma isignali evela ku-sensor puck ingafinyeleli ku-Integrator:

1. Sondeza inzwa ku-Integrator, kanye/noma
2. Faka isiphindayo ekhaya phakathi kwe-sensor puck ne-Integrator exhunywe kusistimu yezokuphepha/ezishintshayo zasekhaya. Yenza lokhu okulandelayo:
3. Thenga i-Integrator ozikhethela yona kanye nokuphakelwa kwamandla (Umkhiqizo CW-REP).
4. Susa ikhava ebiyelwe ngokucindezela ngokucophelela amathebhu aseceleni phakathi.
5. Xhuma ukunikezwa kwamandla kumatheminali 1 & 2 (akukho polarity).
6. Vula i-dip switch 2 (bona #9 ngenhla). Lokhu kubeka iyunithi kumodi yokuphinda. Ama-LED abomvu naluhlaza azocwayiza ngokushintshana ukuze abonise imodi yokuphinda. Izohlala ithola wonke amasignali avela kunzwa futhi iyidlulisele (iphinde) ku-Integrator efakwe eceleni kwesistimu enkulu.
7. Faka i-repeater efasiteleni eliseduze ne-sensor puck.
8. Vala inkinobho ye-dip 1 ukuze uvale i-sounder.

QAPHELA: Ukuze u-ode ikhithi yokuphinda, sebenzisa ikhodi yomkhiqizo CW-REP.

Imininingwane Yezobuchwepheshe

Ezobuchwepheshe Imininingwane
	Inzwa "Puck"	Umhlanganisi
Amandla Kudingeka	2 – CR123A amabhethri (6 V)	8-24VAC; 8-28VDC
Hlala ULINDILE Okwamanje	I-22 Microamps (μA)	25 millionamps (mA)
I-alamu Okwamanje	130 millionamps (mA)	40-80 Milliamps (mA)
I-Relay Isikhathi	–	imizuzwana engu-2
I-Relay Oxhumana nabo	–	I-SPDT, NO noma i-NC (Ifomu C)
I-Relay Oxhumana naye Isilinganiso	–	2 amp/24 VDC (1 mA at 5 VDC min. load)
Umsakazo Ibanga	Ihlolwe ngaphezu komhlabathi, azikho izithiyo, kufika ku-2,500 ft.* Ihlolwe ngenhlabathi, akukho okuvimbekile, kufika ku-1,000 ft.* Sebenzisa i-Repeater ozikhethela yona (CW-REP) ukuze ukhuphule ububanzi bomsakazo
Ibhethri Impilo	Iminyaka engu-1-3*	–
Indawo ebiyelwe Isilinganiso	IP68	–
Amandla Isilinganiso	9.39 ton-force (8514 kgf)	–
Izinga lokushisa Ibanga	-25° F. – +140° F.(-32° C. – 60° C.)
Ubukhulu	4.5“ dia. x 2.5“ H(11.43 cm x 6.35 cm)	3.25” l x2” H x .875” D(8.25 cm x 5.08 cm x 2.22 cm)
Isisindo	2 lbs. (.90 kg)	1 lb. (.45 kg)

* Linganisa kuphela. Ibanga lomsakazo nempilo yebhethri incike ezintweni eziningi eziguquguqukayo. Azikho iziqinisekiso.

ISEXWAYISO: Lo mkhiqizo ungakuchaya kumakhemikhali ahlanganisa i-Acrylonitrile, eyaziwa yiSifundazwe SaseCalifornia ukuthi idala umdlavuza. Ukuze uthole ulwazi olwengeziwe, vakashela ku www.P65Izixwayiso.ca.gov.

NGOKUZITHANDELA I-ANTENNA YANGANGAPHANDLE YEsango

Ekufakweni kuka-opharetha esangweni, uthi olunamathiselwe ngqo ku-Integrator luzosebenza ezimweni eziningi. Ukuphela kwesikhathi lapho kungase kusebenze khona ku-opharetha wesango lensimbi elivaliwe elivimba isignali ye-RF. Uma kunjalo, sebenzisa intambo ye-coaxial efakiwe bese ufaka i-antenna ngaphandle, ngokulandelayo:

1. Bamba imbobo engu-1/4” ku-opharetha wesango.
2. Faka ingxenye yesifazane yekhebula embobeni bese usebenzisa nati ukunamathisela ku-opharetha. Qinisekisa ukuthi i-gasket yerabha ihlala ngaphandle phakathi kuka-opharetha newasha.
3. Isikulufa i-antenna ekugcineni kowesilisa wekhebula ngaphandle ko-opharetha.
4. Isikulufi esiphethweni sowesilisa sekhebula kusixhumi se-antenna ehlanganisiwe.
   

OKUBUYISELAYO Okuthengiswayo

UMTHENGI: Xhumana nesifaki sakho.

Ukufaka: SHAYA NGAPHAMBI KOKUMBA NOMA KUKUKHIPHA

Shaya ucingo 800-878-7829, inketho 1 yokuxazulula inkinga futhi uthole inombolo ye-Return Merchandise Authorization (RMA). Bhala inombolo ye-RMA ebhokisini lokuthumela kanye nanoma yikuphi ukuxhumana okufakwe nomkhiqizo onesici.

ISEXWAYISO: UNGAWATHUMELI AMABHETRI UMA UBUYISELA UMKHIQIZO KU-CARTELL.

IWARANTI YEMINYAKA EMIHLANU

Yonke imikhiqizo ye-Cartell iqinisekisiwe ngokumelene nokukhubazeka kwempahla nokusebenza iminyaka emihlanu. Lesi siqinisekiso asibandakanyi amaphutha adalwa, kodwa asikhawulelwe kulokhu:
izenzo zikaNkulunkulu, ukufakwa okungafanele, ukuhlukumeza, ukulimala komlilo, ukuhlinza kukagesi, ukwehluleka kwesistimu edidiyelwe, ukufakwa kwesivalo/i-gasket/ibhethri okungafanele, izikulufu eziqinisa kakhulu, nezimbobo zokukhumula izikulufu.

Isexwayiso se-FCC

Le divayisi ithobela ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) lolu cingo angeke lubangele ukuphazamiseka okuyingozi, futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki. Noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana Nengxenye 15 Yemithetho Ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile.
Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kunesamukeli se-thr.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Ukuze ugcine ukuthobelana nezinkombandlela ze-FCC's RF Exposure, Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane eliphakathi kuka-20cm werediyetha umzimba wakho: Sebenzisa uthi oluhlinzekiwe kuphela.

Isexwayiso se-IC (Canada): Le divayisi ithobelana nezinga le-RSS elikhishwe yi-Industrial Canada. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) lolu cingo angeke lubangele ukuphazamiseka; (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafunwa kocingo.

idivayisi yakhe ihlolwe ukuthi ingakanani izidingo zokuchayeka ku-RF yedivayisi ephathekayo. Idivayisi igcinwa okungenani i-5 mm kude nomzimba womsebenzisi.

I-ID ye-FCC: 2AUXCCWIN & 2AUXCCWSN (US)
IC#: 25651-CWIN & 25651-CWSN (Canada)

E3957 AUSTRALIA

ULWAZI LOKUXHUMANA

ULWAZI LOKUXHUMANA
UKUSEKELWA KWE-TECH/AMA-RMA	800-878-7829
UKUTHUMELA	800-878-7829
I-ACCOUNTING	800-878-7829
NGAPHAKATHI OKUDAYISWA	800-878-7829
I-EMAIL	Sales@ApolloGateOpeners.com
IKHELI	8500 Hadden Road Twinsburg, OH 44087
WEBI-SITE	www.ApolloGateOpeners.com

www.LinearGateOpeners.com
800-878-7829
Sales@LinearGateOpeners.com

Amadokhumenti / Izinsiza

I-Linear Gate Openers CW-SYS Inzwa Yokuphuma Okungenantambo Enokulungiswa Kokuzwela [pdf] Incwadi Yeziqondiso Inzwa yokuphuma engenantambo ye-CW-SYS enokulungiswa kokuzwela, i-CW-SYS, inzwa yokuphuma okungenantambo enokulungiswa kokuzwela, inzwa enokulungiswa kokuzwela, nokulungiswa kokuzwela, ukulungiswa kokuzwela

Izithenjwa

• Imaniwali yosebenzisayo