Ndị na-emeghe ọnụ ụzọ ámá Linear CW-SYS Ikuku Ọpụpụ Sensọ nwere ntuziaka ngbanwe mgbanwe mmetụta uche.

IHE dị n'igbe ahụ

1. SENSOR "PUCK"
   
2. INTEGRATOR
   
3. AUGER SCREWS (2)
   
4. Batrị CR123A nwere obere batrị (2)
   
5. 3' (1 m.) COAXIAL CABLE
   
6. TERMINAL BLOCK SCROWDRIVER
   

Nhọrọ

• 12VDC ike ọkọnọ

(Nkebi #CW-PSU)

NỌMBA USORO N'USORO

Enwere akara koodu akara n'azụ nke Integrator, ala nke puck na igbe ngwaahịa. Mgbe ị na-akpọ maka ikwu maka ngwaahịa gị, biko nwee otu n'ime nọmba ndị a aka.

Ịwụnye batrị / batrị dị ala

1. Jiri NJ123 batrị na egwuregwu polarity nwere ọdụ batrị dị na puck.
2. Ọ bụrụ na etinyere batrị azụ, ha agaghị eme kọntaktị.
3. Tinye batrị n'ime ebe zuru oke iji mee kọntaktị.
4. Tinye ihe njide rọba n'elu batrị ọ bụla wee banye na ọdụ batrị.
5. Sensọ ga-agbanye ọkụ na-akpaghị aka mgbe arụnyere batrị.

Batrị dị ala

Mgbe batrị chọrọ dochie na ihe mmetụta, Integrator ga-akụ "ọkụ" na LED ya ga-ekpuchi RED.
Mgbe etinyere ya na ntinye mpaghara mpaghara mpụga (lee #10 n'okpuru), hazie ihe ịchọrọ iji gosi obere batrị.

Dochie batrị abụọ ahụ.
Ejila ihe ndọghachi azụ.

EGO

Ejikọtara usoro gị n'ụlọ ọrụ.
Ntuziaka ndị a na-emetụta mgbe ejikọtara nkeji mgbakwunye

Ị nwere ike ijikọ ihe ruru 10 pucks na ọnụ ọgụgụ na-akparaghị ókè nke Integrators

1. Weta ihe mmetụta nso na Integrator wee kwalite Integrator (lee #10 n'okpuru).
2. Pịa bọtịnụ njikọta na Integrator (ga-anọ na ọnọdụ njikọta 30 nkeji).
3. Gbanyụọ & welie ihe mmetụta site na iwepụ na tinyekwa otu batrị (lee #3 n'elu).
   
4. Onye nrụpụta ga-eti mkpu ugboro atọ mgbe ejikọtara ya wee pụọ na ọnọdụ njikọta na-akpaghị aka.

N'OTU ihe	N'ALA	N'ỤWA draịva
	Tinye akara ngosi ka ịnya ụgbọ ala Tinye n'okpuru elu• Auger skru echekwabara Ekpuchila mkpuchi akpa• Kpochie unyi/ahịhịa gburugburuakpa Debe mkpuchi puck dị ọcha

Ịdọ aka ná ntị: Debe mkpuchi na-enweghị unyi, ahịhịa, snow, na ihe mkpofu niile oge niile iji kwe ka akara redio bufee!

Ụdị ule maka SENSOR PUCK

Ụdị ule na-enye ohere ka ihe mmetụta sensọ nwee ike ibunye mgbama redio na-akpaghị aka na-enweghị iji ụgbọ mee ihe mmetụta. Nke a bara uru mgbe ị na-anwale oke mgbama redio (lee #6 n'okpuru).

1. Pịa na jide bọtịnụ na ihe mmetụta maka 2 sekọnd
2. Ikanam na-acha uhie uhie ga-ama jijiji kwa sekọnd mgbe ọ nọ na ọnọdụ ule
3. A ga-enwe nnyefe ozugbo
4. Mbufe ndị ọzọ ga-eme kwa sekọnd iri ọ bụla
5. Ụdị ule ga-apụ mgbe ịpịrị bọtịnụ ọzọ maka sekọnd 2
6. Ụdị ule ga-apụ na-akpaghị aka ka nkeji iri atọ gachara
   

OGE anwale

Sistemu gị nwere oke redio nke opekata mpe 350 ụkwụ ma ọ bụ karịa 1000' ahịrị-anya.
Iji chọpụta oke na ngwa gị, nwalee tupu echichi ikpeazụ.
Ogologo redio dabere n'ọtụtụ mgbanwe:

• Otu esi etinye puck (na ala ma ọ bụ n'elu ala na post)
• Ihe mgbochi na-egbochi mgbama redio, dị ka ala, osisi, foilage, ụlọ, kọnkịtị, wdg.

Iji nwalee oke:

1. Tinye Integrator nso ebe nrụnye ikpeazụ ya n'ime ụlọ ma ọ bụ ọnụ ụzọ ámá.
2. Ị ga-ekwenye na onye nrụpụta na-ada ụda (lee #9 n'okpuru).
3. Tinye ihe mmetụta na ọnọdụ nso ule (lee #5 n'elu).
4. Gee ntị ka Onye nrụpụta ga-akpalite. Ọ bụrụ na ọ meghị, bugharịa ihe mmetụta nso na Integrator.
5. Jide n'aka na ị ga-anwale ọzọ site na mpekere etinyere na ala (lee #8 n'okpuru).
6. Ị nwere ike ịtinye ihe nkwugharị n'ime ụlọ (lee #9 n'okpuru).

Ịtọlite ​​mmetụta uche

Naanị gbanwee uche (nke dị ala) Ọ BỤRỤ na itinye n'ime etiti ụgbọala (lee #8 n'okpuru). N'okwu ndị ọzọ niile jiri ihe ndabara.

Mgbanwe mmetụta uche
ELU (Ebube) Na-achọpụta ụgbọ ala na-aga 5 MPH 12-14' away1 & 2 n'ọnọdụ OFF
Ọkara Chọpụta ụgbọ ala na-aga 5 MPH 6-8' away1 ON & 2 Gbanyụọ
ala Na-achọpụta ụgbọ ala na-aga 5 MPH 2-4' away1 & 2 na ọnọdụ ON

IHE: Ọkachamara uche kachasị dị na mgbanaka na-agbanyụ ọkụ

Ịwụnye ihe mmetụta PUCK

Ịdọ aka ná ntị: Oghere mkpọda na PUCK ga-apụ. Ejila egbe mgbịrịgba ma ọ bụ buru na & pụta ugboro ugboro. Ọ BỤRỤ NA EKWAPỤRỤ SCREWS, ZỤTA ESIRI IKE AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ.

Enwere ike itinye ihe mmetụta sensọ n'okporo ụzọ awara awara, n'ime ala ma ọ bụ n'ihe a na-apụghị ibugharị (post, osisi, wdg).

N'OTU ihe (lee ihe atụ ala aka ekpe)

1. Mgbe anwalela oke (lee #6 n'elu), mkpuchi oche na nchekwa na screws nyere. E kwesịghị inwe oghere n'etiti mkpuchi na akpa. Kpachara anya ka ị ghara iji egbe mgbịrịgba yipụ skru. Mechaa iji aka mechie ike.
2. Chọta osisi, akwụkwọ ozi, ma ọ bụ ihe ọzọ ozugbo n'akụkụ okporo ụzọ ahụ.
3. Jide n'aka na ihe ahụ bụ IMMOVABLE ma ọ bụ mkpu ụgha ga-eme.
4. Jiri oghere ndị dị na taabụ dị n'okpuru kụchie ihe ahụ.

N'ALA (lee ihe atụ ala aka ekpe)

1. Mgbe anwalela oke (lee #6 n'elu), mkpuchi oche na nchekwa na screws nyere. E kwesịghị inwe oghere n'etiti mkpuchi na akpa. Kpachara anya ka ị ghara iji egbe mgbịrịgba yipụ skru. Mechaa iji aka mechie ike.
2. Chọta ebe ozugbo n'akụkụ okporo ụzọ.
3. Gwuo olulu buru ibu nke ga-ezuru skru na puck, na-ekwe ka mkpuchi puck dị larịị na elu unyi.
4. Chekwaa puck n'ime ala nwere skru auger, taabụ nkịta na-ekpuchi elu.
   Ọ bụrụ na ị naghị echekwa akpa, ndị na-ahịhịa ahịhịa, wdg ga-adọkpụrụ ya.
5. Mkpọ na tamp unyi n'okirikiri puck, na-ahụ na mkpuchi dị ọcha nke unyi na irighiri ihe niile.

N'ime ihe nkwụnye ọpụpụ efu, Ọ BỤRỤ na anụmanụ ma ọ bụ ndị mmadụ na-azọ ụkwụ na sensọ PUCK n'ala, ọ nwere ike ịkpalite ọnụ ụzọ ámá imeghe. Tụlee ịtinye na post ma ọ bụ n'ụzọ ụgbọala kama.

N'ỤWA draịva (lee ihe atụ ala aka ekpe)

1. Mgbe anwalela oke (lee #6 n'elu), mkpuchi oche na nchekwa na screws nyere. E kwesịghị inwe oghere n'etiti mkpuchi na akpa. Kpachara anya ka ị ghara iji egbe mgbịrịgba yipụ skru. Mechaa iji aka mechie ike.
   Mara: Ọ bụrụ na ị gafefe okporo ụzọ, tụlee ịtụgharị uche ala (lee #7 n'elu)
2. Jiri oghere masonry 4.5 ″ dayameta were were were were were were were. Ọkpụkpụ opekata mpe 2.75” ka mkpuchi puck ga-adị 1/4 ″ n'okpuru elu ụgbọ ala (ya mere enweghị ike ịdọrọ ya site na plow snow, graters, wdg).
3. Wunye akara loop n'ime oghere, kpachara anya ka ị ghara imeju ya, ma tinye akpa n'ime oghere.
4. Jide n'ala n'ịdị arọ ruo mgbe akara siri ike.
5. Awụsala sealant n'elu mkpuchi puck ma ọ bụ ndị isi ka ị nweta batrị.

INTEGRATOR DIP SWITCHES

Dip switches jikwaa ụda ụda na ọnọdụ nkwugharị na Integrator.

ỤDỌDỤ
Gbanye mgba ọkụ 1 gbanye ka ịgbanwuo ụda.
Ụda ga-ada ugboro 3 mgbe achọpụtara ụgbọ ala. Ọ 'ga-akụkwa' mgbe batrị ihe mmetụta dị obere ma chọọ dochie ya.

Ụdị mmegharị
Tụgharịa mgba ọkụ 2 ON ka ịgbanwuo Integrator ka ọ bụrụ onye na-emegharị ihe. Na ọnọdụ ugboro ugboro, otu ahụ ga-anọgide na-anata ma na-emeghachi mgbaama ọ bụla sitere na ihe mmetụta na Onye Nmekọrịta arụnyere n'ụlọ (lee #11 n'okpuru). Uhie na-acha anụnụ anụnụ na LED ga-atụgharị na-aga n'ihu n'ihu n'ihu na ọnọdụ ugboro ugboro.

Ịwụnye INTEGRATOR

Sistemu gị na-ejikọ n'enweghị nsogbu na sistemu nchekwa/HA ma ọ bụ onye na-ahụ maka ọnụ ụzọ eletrik. Iji jikọta, jiri schematics wiring ndị a dị ka ntuziaka:

Sistemụ nchekwa akpaaka/ụlọ

Integrator na-eji 8-24 VAC ma ọ bụ 8-30 VDC. Jiri sistemu nchekwa/HA ma ọ bụ onye na-ahụ maka ọnụ ụzọ nweta ọkụ ma ọ bụ jiri ọkụ 12VDC ọ bụla. Cartell na-ere ọkụ ike nhọrọ (akụkụ #CW-PS).

Ị ga-atụkwasịrịrị nchekwa n'ọnụ ụzọ ámá mgbe ị na-eji CW-SYS maka ọpụpụ efu.

Ndị na-arụ ọrụ ọnụ ụzọ ámá akpaaka

Ọpụpụ ọpụpụ abụọ

ỌPỤTA Ọpụpụ otu

Ụdị mmegharị

Ka iwelie oke redio, ọ nwere ike ịdị mkpa ka Onye nrụpụta bụrụ ihe nkwugharị.
Ọ bụrụ na mgbama sitere na puck sensọ anaghị erute Onye nrụpụta:

1. Bugharịa ihe mmetụta nso na Integrator, na/ma ọ bụ
2. Wụnye onye na-emegharị ihe n'ime ụlọ n'etiti ihe mmetụta sensọ na onye nrụpụta ejikọrọ na sistemu nchekwa/ụlọ akpaaka. Mee ihe ndị a:
3. Zụta ihe ntinye na ntinye ike (Product CW-REP).
4. Wepu mkpuchi mkpuchi site na iji nlezianya na-agbanye taabụ n'akụkụ.
5. Jikọọ ọkụ ọkụ na ọnụ 1 & 2 (enweghị polarity).
6. Tụgharịa mgba ọkụ 2 ON (lee #9 n'elu). Nke a na-etinye unit ahụ na ọnọdụ ugboro ugboro. Igwe ọkụ na-acha uhie uhie na na-acha anụnụ anụnụ ga-atụgharị ọzọ wee gosi ọnọdụ ugboro ugboro. Ọ ga-anọgide na-anata akara ngosi ọ bụla site na ihe mmetụta ma bufee (na-emegharị) ya na Integrator arụnyere n'akụkụ isi usoro.
7. Wụnye repeater na mpio kacha nso na ihe mmetụta.
8. Gbanyụọ mgba ọkụ 1 iji gbanyụọ ụda.

IHE: Iji tụọ ngwa nkwugharị, jiri koodu ngwaahịa CW-REP.

Nkọwa nka nka

Nka na ụzụ Nkọwapụta
	Sensọ "Puck"	Onye ndozi
Ike Achọrọ	2 - batrị CR123A (6V)	8-24VAC; 8-28VDC
Kwụrụ n'ụsọ Ugbu a	22 Microamps (μA)	25 ndeamps (mA)
Oti mkpu Ugbu a	130 ndeamps (mA)	40-80 Milliamps (mA)
Ntugharị Oge	–	2 sekọnd
Ntugharị Ndi ana-akpo	–	SPDT, NO ma ọ bụ NC (Form C)
Ntugharị Kpọtụrụ Ogo	–	2 amp/24 VDC (1 mA na 5 VDC nkeji ibu)
Redio Oke	A nwalere n'elu ala, enweghị ihe mgbochi, ruo 2,500 ft.* A nwalere ncha na ala, enweghị ihe mgbochi, ruo 1,000 ft.* Jiri Nhọrọ Repeater (CW-REP) ka iwelie oke redio
Batrị Ndụ	1-3 afọ*	–
Mkpuchi Ogo	IP68	–
Ike Ogo	9.39 ton-ike (8514 kgf)	–
Okpomọkụ Oke	-25°F. – +140°F.(-32°C. – 60°C.)
Akụkụ	4.5“ dia. x 2.5“ H (11.43 cm x 6.35 cm)	3.25” L x2” H x .875” D (8.25 cm x 5.08 cm x 2.22 cm)
Ibu	2 lb. (.90 n'arọ)	1 lb. (.45 n'arọ)

* Atụmatụ naanị. Ogologo redio na ndụ batrị dabere n'ọtụtụ mgbanwe. Enweghị nkwa.

Ịdọ aka ná ntị: Ngwaahịa a nwere ike ikpughe gị na kemịkalụ gụnyere Acrylonitrile, nke mara steeti California na-ebute ọrịa kansa. Maka ozi ndị ọzọ, gaa na www.P65Warnings.ca.gov.

Nhọrọ Mpụga ọnụ ụzọ ámá ANTENNA

N'ime nrụnye ndị na-arụ ọrụ ọnụ ụzọ ámá, antenna etinyere ozugbo na Integrator ga-arụ ọrụ n'ọtụtụ oge. Naanị oge ọ nwere ike ọ gaghị arụ ọrụ bụ na onye na-arụ ọrụ ọnụ ụzọ igwe mechiri emechi nke na-egbochi mgbama RF. Ọ bụrụ otu ahụ, jiri eriri coaxial gụnyere ma wụnye antenna na mpụga, dịka ndị a:

1. Gwuo oghere 1/4" n'ime onye ọrụ ọnụ ụzọ ámá.
2. Tinye eriri nwanyị site na oghere ma jiri nut tinye na onye ọrụ. Gbaa mbọ hụ na gasket roba na-anọ n'èzí n'etiti onye na-arụ ọrụ na igwe ịsa akwa.
3. Mkpọsa antenna na nsọtụ eriri nwoke na-abụghị onye ọrụ.
4. Kpọchie ngwụcha eriri nwoke gaa na njikọ antenna Integrator.
   

Ịlaghachi ngwa ahịa

NA-EGO: Kpọtụrụ onye nrụnye gị.

Ntinye: Kpọọ tupu gwuo ala ma ọ bụ wụnye

Kpọọ 800-878-7829, nhọrọ 1 iji dozie nsogbu ma nata nọmba ikike ịlaghachi azụ ahịa (RMA). Dee nọmba RMA na igbe mbupu yana akwụkwọ ozi ọ bụla gụnyere ngwaahịa nwere nkwarụ.

Ịdọ aka ná ntị: Ebupula batrị mgbe ị na-eweghachi ngwaahịa na CARTELL.

NKWUKWU AFỌ ISE

Ngwaahịa Cartell niile nwere ikike megide ntụpọ n'ihe yana arụ ọrụ afọ ise. Akwụkwọ ikike a anaghị ekpuchi ntụpọ ndị kpatara, mana ọnweghị oke na:
omume nke Chineke, nrụnye na-ekwesịghị ekwesị, mmegbu, mmebi ọkụ, ọkụ eletrik, ọdịda sistemu agbakwunyere, mkpuchi / gasket / batrị na-ezighi ezi, kposara skru, na iwepụ oghere.

FCC NDỌ AKA NA NTN

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị. Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
IHE: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye.
Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere dị na sekit dị iche na nke nnata thr.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Iji nọgide na-agbaso ụkpụrụ ntụzịaka RF Exposure nke FCC, ekwesịrị ịwụnye ngwa a ma rụọ ọrụ ya na anya kacha nta n'etiti 20cm radiator ahụ gị: Jiri naanị antenna wetara.

Akpachara anya IC (Canada): Ngwaọrụ a na-akwado ụkpụrụ RSS enweghị ikike ụlọ ọrụ Canada. Arụ ọrụ bụ n'okpuru ọnọdụ abụọ a: (1) ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya; (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ọrụ ngwaọrụ ahụ achọghị.

a enyochala ngwaọrụ mkpanaka RF chọrọ mkpughe. A na-edobe ngwaọrụ a opekata mpe 5 mm site na ahụ onye ọrụ.

FCC ID #: 2AUXCCWIN & 2AUXCCWSN (US)
IC#: 25651-CWIN & 25651-CWSN (Canada)

E3957 AUSTRALIA

OZI MKPỌTỤRỤ

OZI MKPỌTỤRỤ
Nkwado TECH/RMA	800-878-7829
Mbupu	800-878-7829
AKWỤKWỌ	800-878-7829
N'ime ire ere	800-878-7829
EMAIL	Ahịa @ApolloGateOpeners.com
ADERE	8500 Hadden Road Twinsburg, OH 44087
WEBsaịtị	www.ApolloGateOpeners.com

www.LinearGateOpeners.com
800-878-7829
Ahịa @LinearGateOpeners.com

Akwụkwọ / akụrụngwa

Ndị na-emepe ọnụ ụzọ ámá Linear CW-SYS Ikuku Ọpụpụ ihe mmetụta na mgbanwe mmetụta uche [pdf] Akwụkwọ ntuziaka Ihe mmetụta ọpụpụ ikuku ikuku nke CW-SYS nwere ngbanwe mmetụta uche, CW-SYS, ihe mmetụta ọpụpụ ikuku nwere ngbanwe mmetụta uche, ihe mmetụta nwere ngbanwe mmetụta uche, yana ngbanwe mmetụta uche, ndozigharị uche.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ