Graph Tech 開槽解鎖螺帽弦

產品資訊

規格：

• 代碼：
  • 6517 FR 原件 #2
  • 6518 FR 原件 #3/#4
  • 6519 法國特惠
  • 6520 IBANEZ風格
• 產品尺寸：
  • 長度： 43.00 毫米/1.693 英寸
  • 厚度： 15.40 毫米/0.606 英寸
  • 高度： 7.50 毫米/0.295 英寸
    （不同型號提供額外尺寸）
• 端對端：
  提供每個型號的測量值
• 半徑：
  254 毫米/10 英吋（適用於大多數型號）

產品使用說明

解鎖螺帽安裝指南：

1. 第 1 步： Follow instructions for low E and high E gap measurements.
2. 第 2 步： Perform the specified actions for step 2.
3. 第 3 步： Continue with the instructions for step 3.
4. 第 4 步： Adjust the gap for low E and high E as per the provided values.
5. 第 5 步： Proceed with step 5 of the installation process.
6. 第 6 步： Finalize the installation process following step 6.
   筆記： For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

聯絡資訊：

• Web地點： www.graphtech.com
• 電子郵件支援： support@graphtech.com
• 電話支援： 604-940-5353 擴展130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the web地點。

特徵

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

解鎖螺帽安裝指南

• 步驟1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• 步驟2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• 步驟3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• 步驟4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• 步驟6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

關於公司

• Web地點：
  www.graphtech.com
• 支持：
  support@graphtech.com
• 電話支援：
  604-940-5353 擴展130
  要下載 Graph Tech 產品的產品尺寸和安裝說明，請在我們的頂部選單的“支援”部分下找到“幫助中心”鏈接 web地點。

常問問題

我可以將此產品與任何類型的吉他一起使用嗎？

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

文件/資源

Graph Tech 開槽解鎖螺帽弦 [pdf] 使用說明書 6517、6518、6519、6520、非鎖緊開槽螺帽、非鎖緊螺帽、開槽螺帽、開槽螺帽、開槽螺母

參考

• 使用者手冊