Ihe eserese Tech Un-Lock Nut String Slotted

Ozi ngwaahịa

Nkọwapụta:

• KỌDỤ:
  • 6517 FR izizi #2
  • 6518 FR mbụ #3/#4
  • 6519 FR pụrụ iche
  • 6520 IBANEZ-style
• Akụkụ ngwaahịa:
  • Ogologo: 43.00 mm / 1.693 inch
  • Ọkpụrụkpụ: 15.40 mm / 0.606 inch
  • Ogologo: 7.50 mm / 0.295 inch
    (akụkụ ndị ọzọ enyere maka ụdị dị iche iche)
• E TO E:
  Enyere nha maka ụdị ọ bụla
• Radius:
  254 mm / 10 na (maka ọtụtụ ụdị)

Ntuziaka ojiji ngwaahịa

Ntuziaka nwụnye ekpochi akpọchi:

1. Nzọụkwụ 1: Follow instructions for low E and high E gap measurements.
2. Nzọụkwụ 2: Perform the specified actions for step 2.
3. Nzọụkwụ 3: Continue with the instructions for step 3.
4. Nzọụkwụ 4: Adjust the gap for low E and high E as per the provided values.
5. Nzọụkwụ 5: Proceed with step 5 of the installation process.
6. Nzọụkwụ 6: Finalize the installation process following step 6.
   Mara: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Ozi mkpọtụrụ:

• Websaịtị: www.graphtech.com
• Nkwado email: nkwado@graphtech.com
• Nkwado Tel: 604-940-5353 Mgbakwunye 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the websaịtị.

Atụmatụ

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

Ntuzi ntinye ekpochi akpọchi

• Nzọụkwụ 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• Nzọụkwụ 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• Nzọụkwụ 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• Nzọụkwụ 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• Nzọụkwụ 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

Banyere ụlọ ọrụ

• Websaịtị:
  www.graphtech.com
• Nkwado:
  nkwado@graphtech.com
• Nkwado Tel:
  604-940-5353 Mgbakwunye 130
  Iji budata nha ngwaahịa na ntuziaka nwụnye maka ngwaahịa Graph Tech, chọta njikọ ebe enyemaka n'okpuru ngalaba nkwado dị na menu dị n'elu na anyị. websaịtị.

FAQ

Enwere m ike iji ngwaahịa a na ụdị guitar ọ bụla?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Akwụkwọ / akụrụngwa

Ihe eserese Tech Un-Lock Nut String Slotted [pdf] Akwụkwọ ntuziaka 6517, 6518, 6519, 6520, Un-Lock Nut String Slotted, Un-Lock, Nut String Slotted, Eriri Slotted, Slotted

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ