Graph Tech Un-Lock Nut String Slotted

Информация за продукта

Спецификации:

• КОД:
  • 6517 FR Оригинал #2
  • 6518 FR Оригинал #3/#4
  • 6519 FR Специал
  • 6520 IBANEZ стил
• Размери на продукта:
  • Дължина: 43.00 мм / 1.693 инча
  • Дебелина: 15.40 мм / 0.606 инча
  • Височина: 7.50 мм / 0.295 инча
    (Допълнителни размери са предоставени за различните модели)
• От изток до изток:
  Предоставени са размери за всеки модел
• Радиус:
  254 мм / 10 инча (за повечето модели)

Инструкции за употреба на продукта

Ръководство за монтаж на разхлабена контрагайка:

1. СТЪПКА 1: Follow instructions for low E and high E gap measurements.
2. СТЪПКА 2: Perform the specified actions for step 2.
3. СТЪПКА 3: Continue with the instructions for step 3.
4. СТЪПКА 4: Adjust the gap for low E and high E as per the provided values.
5. СТЪПКА 5: Proceed with step 5 of the installation process.
6. СТЪПКА 6: Finalize the installation process following step 6.
   Забележка: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Информация за контакт:

• Webсайт: www.graphtech.com
• Поддръжка по имейл: support@graphtech.com
• Телефон за поддръжка: 604-940-5353 външно 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webсайт.

ХАРАКТЕРИСТИКИ

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

РЪКОВОДСТВО ЗА МОНТАЖ НА ОТКЛЮЧВАЩАТА ГАЙКА

• СТЪПКА 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• СТЪПКА 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• СТЪПКА 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• СТЪПКА 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• СТЪПКА 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

ЗА КОМПАНИЯТА

• Webсайт:
  www.graphtech.com
• поддръжка:
  support@graphtech.com
• Телефон за поддръжка:
  604-940-5353 външно 130
  За да изтеглите размери на продуктите и инструкции за монтаж на продуктите на Graph Tech, намерете връзката към Центъра за помощ в секцията „Поддръжка“ в горното меню на нашата webсайт.

ЧЗВ

Мога ли да използвам този продукт с всеки тип китара?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Документи / Ресурси

Graph Tech Un-Lock Nut String Slotted [pdf] Ръководство за употреба 6517, 6518, 6519, 6520, Отключваща се гайка с шлиц, Отключваща се, Гайка с шлиц, С шлиц, С шлиц

Референции

• Ръководство за потребителя