Graph Tech Malŝlosilaj Nuksoj kun Fendetoj

Produktaj Informoj

Specifoj:

• KODO:
  • 6517 FR Originala #2
  • 6518 FR Originala #3/#4
  • 6519 FR Specialaĵo
  • 6520 IBANEZ-stila
• Produktaj Dimensioj:
  • Longo: 43.00 mm/1.693 in
  • Dikeco: 15.40 mm/0.606 in
  • Alteco: 7.50 mm/0.295 in
    (Pliaj dimensioj estas provizitaj por malsamaj modeloj)
• E ĜIS E:
  Mezuroj provizitaj por ĉiu modelo
• Radiuso:
  254 mm / 10 coloj (por plej multaj modeloj)

Produktaj Uzado-Instrukcioj

Gvidilo por Instali Malŝlosilan Nukson:

1. PAŜO 1: Follow instructions for low E and high E gap measurements.
2. PAŜO 2: Perform the specified actions for step 2.
3. PAŜO 3: Continue with the instructions for step 3.
4. PAŜO 4: Adjust the gap for low E and high E as per the provided values.
5. PAŜO 5: Proceed with step 5 of the installation process.
6. PAŜO 6: Finalize the installation process following step 6.
   Notu: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Kontaktinformoj:

• Webretejo: www.graphtech.com
• Retpoŝta Subteno: support@graphtech.com
• Telefona Subteno: 604-940-5353 ekst. 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webretejo.

Ecoj

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

Gvidilo por instali malŝlosi nukson

• PAŜO 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• PAŜO 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• PAŜO 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• PAŜO 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• PAŜO 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

PRI KOMPRUNO

• Webretejo:
  www.graphtech.com
• Subteno:
  support@graphtech.com
• Telefona Subteno:
  604-940-5353 ekst. 130
  Por elŝuti produktajn mezurojn kaj instalaĵajn instrukciojn por Graph Tech-produktoj, trovu la ligilon al la Helpa Centro sub la sekcio Subteno en la supra menuo de nia... webretejo.

Oftaj Demandoj

Ĉu mi povas uzi ĉi tiun produkton kun ajna speco de gitaro?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Dokumentoj/Rimedoj

Graph Tech Malŝlosilaj Nuksoj kun Fendetoj [pdf] Instrukcia Manlibro 6517, 6518, 6519, 6520, Malŝlosa Nukso Ŝnuro Fendita, Malŝlosa, Nukso Ŝnuro Fendita, Ŝnuro Fendita, Fendita

Referencoj

• Uzanto Manlibro