Graph Tech Desbloqueig de femella ranurada

Informació del producte

Especificacions:

• CODI:
  • 6517 FR Original #2
  • 6518 FR Original #3/#4
  • 6519 FR Especial
  • 6520 estil IBANEZ
• Dimensions del producte:
  • Longitud: 43.00 mm / 1.693 polzades
  • Gruix: 15.40 mm / 0.606 polzades
  • Alçada: 7.50 mm / 0.295 polzades
    (Dimensions addicionals proporcionades per a diferents models)
• D'E A E:
  Mesures proporcionades per a cada model
• Radi:
  254 mm / 10 polzades (per a la majoria de models)

Instruccions d'ús del producte

Guia d'instal·lació de la femella de desbloqueig:

1. PAS 1: Follow instructions for low E and high E gap measurements.
2. PAS 2: Perform the specified actions for step 2.
3. PAS 3: Continue with the instructions for step 3.
4. PAS 4: Adjust the gap for low E and high E as per the provided values.
5. PAS 5: Proceed with step 5 of the installation process.
6. PAS 6: Finalize the installation process following step 6.
   Nota: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Informació de contacte:

• Weblloc: www.graphtech.com
• Suport per correu electrònic: support@graphtech.com
• Assistència telefònica: 604-940-5353 extensió 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the weblloc.

CARACTERÍSTIQUES

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

GUIA D'INSTAL·LACIÓ DE LA FEMELLA DE DESBLOQUEIG

• PAS 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• PAS 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• PAS 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• PAS 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• PAS 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

SOBRE L'EMPRESA

• Weblloc:
  www.graphtech.com
• Suport:
  support@graphtech.com
• Assistència telefònica:
  604-940-5353 extensió 130
  Per descarregar les mesures del producte i les instruccions d'instal·lació dels productes Graph Tech, busqueu l'enllaç del Centre d'ajuda a la secció Suport del menú superior de la nostra pàgina. weblloc.

Preguntes freqüents

Puc utilitzar aquest producte amb qualsevol tipus de guitarra?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Documents/Recursos

Graph Tech Desbloqueig de femella ranurada [pdfManual d'instruccions 6517, 6518, 6519, 6520, Desbloqueig de la femella amb cadena ranurada, Desbloqueig, femella amb cadena ranurada, cadena ranurada, ranurada

Referències

• Manual d'usuari