Graph Tech Un-Lock Nut String Slotted
ຂໍ້ມູນຜະລິດຕະພັນ
ຂໍ້ມູນຈໍາເພາະ:
- ລະຫັດ:
- 6517 FR ຕົ້ນສະບັບ #2
- 6518 FR ຕົ້ນສະບັບ #3/#4
- 6519 FR ພິເສດ
- 6520 IBANEZ ແບບ
- ຂະໜາດຜະລິດຕະພັນ:
- ຄວາມຍາວ: 43.00 ມມ / 1.693 ນິ້ວ
- ຄວາມໜາ: 15.40 ມມ / 0.606 ນິ້ວ
- ຄວາມສູງ: 7.50 ມມ / 0.295 ນິ້ວ
(ຂະຫນາດເພີ່ມເຕີມສະຫນອງໃຫ້ສໍາລັບຮູບແບບທີ່ແຕກຕ່າງກັນ)
- E TO E:
ການວັດແທກທີ່ສະຫນອງໃຫ້ສໍາລັບແຕ່ລະແບບ - ລັດສະໝີ:
254 ມມ / 10 ໃນ (ສໍາລັບແບບຈໍານວນຫຼາຍ)
ຄໍາແນະນໍາການນໍາໃຊ້ຜະລິດຕະພັນ
Un-lock Nut ຄູ່ມືການຕິດຕັ້ງ:
- ຂັ້ນຕອນທີ 1: Follow instructions for low E and high E gap measurements.
- ຂັ້ນຕອນທີ 2: Perform the specified actions for step 2.
- ຂັ້ນຕອນທີ 3: Continue with the instructions for step 3.
- ຂັ້ນຕອນທີ 4: Adjust the gap for low E and high E as per the provided values.
- ຂັ້ນຕອນທີ 5: Proceed with step 5 of the installation process.
- ຂັ້ນຕອນທີ 6: Finalize the installation process following step 6.
ໝາຍເຫດ: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.
ຂໍ້ມູນຕິດຕໍ່:
- Webເວັບໄຊ: www.graphtech.com
- ສະຫນັບສະຫນູນອີເມວ: support@graphtech.com
- ການຊ່ວຍເຫຼືອທາງໂທລະສັບ: 604-940-5353 ຕໍ່ 130
To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webເວັບໄຊ.
ຄຸນສົມບັດ
- Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
- Waaaaay easier string bends on the Ist to 5th string positions.
- Faster string changes.
- 80% reduced headstock weight.
- No more Allen keys for your nut.
- Improved string to headstock connection (You’ll feel this the first time you play).
- Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
- The ability to tweak string heights, just like a regular nut.
- 10,12, and 16-inch radius available (more models on the way).
AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)
ຄູ່ມືການຕິດຕັ້ງ UN-LOCK NUT
- ຂັ້ນຕອນ 1
Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.
- ຂັ້ນຕອນ 2
If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.
- ຂັ້ນຕອນ 3
When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.
- ຂັ້ນຕອນ 4
See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.
- RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″
- ຂັ້ນຕອນ 6
Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.
ກ່ຽວກັບບໍລິສັດ
- Webເວັບໄຊ:
www.graphtech.com - ສະຫນັບສະຫນູນ:
support@graphtech.com - ການຊ່ວຍເຫຼືອທາງໂທລະສັບ:
604-940-5353 ຕໍ່ 130
ເພື່ອດາວໂຫລດການວັດແທກຜະລິດຕະພັນແລະຄໍາແນະນໍາການຕິດຕັ້ງສໍາລັບຜະລິດຕະພັນ Graph Tech, ຊອກຫາການເຊື່ອມຕໍ່ສູນຊ່ວຍເຫຼືອພາຍໃຕ້ພາກສະຫນັບສະຫນູນໃນເມນູດ້ານເທິງຂອງພວກເຮົາ. webເວັບໄຊ.
FAQ
ຂ້ອຍສາມາດໃຊ້ຜະລິດຕະພັນນີ້ກັບກີຕ້າປະເພດໃດ?
The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.
What do I do if I encounter issues during installation?
In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.
ເອກະສານ / ຊັບພະຍາກອນ
 |
Graph Tech Un-Lock Nut String Slotted [pdf] ຄູ່ມືການສອນ 6517, 6518, 6519, 6520, Un-Lock Nut String Slotted, Un-Lock, Nut String Slotted, String Slotted, Slotted |