Graph Tech Un-Lock Nut String Slotted
Informacje o produkcie
Dane techniczne:
- KOD:
- 6517 FR Oryginalny nr 2
- 6518 FR Oryginalny #3/#4
- 6519 FR Specjalny
- 6520 w stylu IBANEZ
- Wymiary produktu:
- Długość: 43.00 mm / 1.693 cala
- Grubość: 15.40 mm / 0.606 cala
- Wysokość: 7.50 mm / 0.295 cala
(Dodatkowe wymiary podano dla różnych modeli)
- E DO E:
Wymiary podane dla każdego modelu - Promień:
254 mm / 10 cali (dla większości modeli)
Instrukcje użytkowania produktu
Instrukcja montażu nakrętki zabezpieczającej:
- KROK 1: Follow instructions for low E and high E gap measurements.
- KROK 2: Perform the specified actions for step 2.
- KROK 3: Continue with the instructions for step 3.
- KROK 4: Adjust the gap for low E and high E as per the provided values.
- KROK 5: Proceed with step 5 of the installation process.
- KROK 6: Finalize the installation process following step 6.
Notatka: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.
Informacje kontaktowe:
- Webstrona: www.graphtech.com
- Wsparcie e-mailowe: wsparcie@graphtech.com
- Wsparcie telefoniczne: 604-940-5353 ext 130
To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webstrona.
CECHY
- Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
- Waaaaay easier string bends on the Ist to 5th string positions.
- Faster string changes.
- 80% reduced headstock weight.
- No more Allen keys for your nut.
- Improved string to headstock connection (You’ll feel this the first time you play).
- Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
- The ability to tweak string heights, just like a regular nut.
- 10,12, and 16-inch radius available (more models on the way).
AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)
INSTRUKCJA MONTAŻU NAKRĘTKI ODBLOKOWUJĄCEJ
- KROK 1
Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.
- KROK 2
If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.
- KROK 3
When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.
- KROK 4
See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.
- RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″
- KROK 6
Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.
O FIRMIE
- Webstrona:
www.graphtech.com - Wsparcie:
wsparcie@graphtech.com - Wsparcie telefoniczne:
604-940-5353 ext 130
Aby pobrać wymiary produktu i instrukcje instalacji produktów Graph Tech, znajdź łącze do Centrum pomocy w sekcji Wsparcie w górnym menu naszej strony. webstrona.
Często zadawane pytania
Czy mogę używać tego produktu z dowolnym typem gitary?
The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.
What do I do if I encounter issues during installation?
In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.
Dokumenty / Zasoby
 |
Graph Tech Un-Lock Nut String Slotted [plik PDF] Instrukcja obsługi 6517, 6518, 6519, 6520, Odblokowanie nakrętki, struna z nacięciem, Odblokowanie, struna z nacięciem, struna z nacięciem, z nacięciem |