Graph Tech Un-Lock txiv ntoo hlua Slotted

Cov ntaub ntawv khoom

Specifications:

• CODE:
  • 6517 FR Original #2
  • 6518 FR Original #3/#4
  • 6519 FR tshwj xeeb
  • 6520 IBANEZ-style
• Khoom Dimensions:
  • Ntev: 43.00mm / 1.693 nyob rau hauv
  • Thickness: 15.40mm / 0.606 nyob rau hauv
  • Qhov siab: 7.50mm / 0.295 nyob rau hauv
    (Ntxiv qhov ntev muab rau cov qauv sib txawv)
• E TO E:
  Kev ntsuas tau muab rau txhua tus qauv
• Radius:
  254 mm / 10 nyob rau hauv (rau feem ntau qauv)

Cov lus qhia siv khoom

Un-Lock txiv ntseej Installation Guide:

1. Kauj ruam 1: Follow instructions for low E and high E gap measurements.
2. Kauj ruam 2: Perform the specified actions for step 2.
3. Kauj ruam 3: Continue with the instructions for step 3.
4. Kauj ruam 4: Adjust the gap for low E and high E as per the provided values.
5. Kauj ruam 5: Proceed with step 5 of the installation process.
6. Kauj ruam 6: Finalize the installation process following step 6.
   Nco tseg: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Tiv tauj xov tooj:

• Webqhov chaw: www.graphtech.com
• Email Support: support@graphtech.com
• Tel Support: 604-940-5353 Ib txuas 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webqhov chaw.

NTA

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

UN-LOCK NUT INSTALLATION GUIDE

• KAUJ RUAM 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• KAUJ RUAM 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• KAUJ RUAM 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• KAUJ RUAM 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• KAUJ RUAM 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

Hais txog COMPANY

• Webqhov chaw:
  www.graphtech.com
• Kev them nyiaj yug:
  support@graphtech.com
• Tel Support:
  604-940-5353 Ib txuas 130
  Txhawm rau rub tawm cov khoom ntsuas thiab cov lus qhia kev teeb tsa rau Graph Tech cov khoom lag luam, nrhiav qhov Chaw Pabcuam Txuas hauv qab ntu Kev Txhawb nqa hauv cov ntawv qhia zaub mov saum toj kawg nkaus ntawm peb webqhov chaw.

FAQ

Kuv puas tuaj yeem siv cov khoom no nrog txhua hom guitar?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Cov ntaub ntawv / Cov ntaub ntawv

Graph Tech Un-Lock txiv ntoo hlua Slotted [ua pdf] Phau ntawv qhia 6517, 6518, 6519, 6520, Un-lock Nut String Slotted, Un-lock, Txiv ntseej txoj hlua Slotted, Txoj hlua Slotted, Slotted

Cov ntaub ntawv

• Cov neeg siv phau ntawv