Graph Tech Un-Lock Nut String Slotted

Informazioni sul prodotto

Specifiche:

• CODICE:
  • 6517 FR Originale n. 2
  • 6518 FR Originale #3/#4
  • 6519 FR Special
  • 6520 stile IBANEZ
• Dimensioni del prodotto:
  • Lunghezza: 43.00 mm / 1.693 pollici
  • Spessore: 15.40 mm / 0.606 pollici
  • Altezza: 7.50 mm / 0.295 pollici
    (Dimensioni aggiuntive fornite per modelli diversi)
• E A E:
  Misure fornite per ogni modello
• Raggio:
  254 mm / 10 pollici (per la maggior parte dei modelli)

Istruzioni per l'uso del prodotto

Guida all'installazione del dado di sblocco:

1. PASSO 1: Follow instructions for low E and high E gap measurements.
2. PASSO 2: Perform the specified actions for step 2.
3. PASSO 3: Continue with the instructions for step 3.
4. PASSO 4: Adjust the gap for low E and high E as per the provided values.
5. PASSO 5: Proceed with step 5 of the installation process.
6. PASSO 6: Finalize the installation process following step 6.
   Nota: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Informazioni sui contatti:

• Websito: www.graphtech.com
• Supporto via e-mail: support@graphtech.com
• Assistenza telefonica: Numero di telefono: 604-940-5353 ext 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the websito.

CARATTERISTICHE

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

GUIDA ALL'INSTALLAZIONE DEL DADO DI SBLOCCO

• PASSO 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• PASSO 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• PASSO 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• PASSO 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• PASSO 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

INFORMAZIONI SULL'AZIENDA

• Websito:
  www.graphtech.com
• Supporto:
  support@graphtech.com
• Assistenza telefonica:
  Numero di telefono: 604-940-5353 ext 130
  Per scaricare le misure del prodotto e le istruzioni di installazione per i prodotti Graph Tech, trova il collegamento al Centro assistenza nella sezione Supporto nel menu in alto sul nostro websito.

Domande frequenti

Posso usare questo prodotto con qualsiasi tipo di chitarra?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Documenti / Risorse

Graph Tech Un-Lock Nut String Slotted [pdf] Manuale di istruzioni 6517, 6518, 6519, 6520, Dado di sblocco con scanalatura a corda, Sblocca, Dado di sblocco con scanalatura a corda, Con scanalatura a corda, Con scanalatura

Riferimenti

• Manuale d'uso