ग्राफ टेक अन-लॉक नट स्ट्रिंग स्लॉटेड
उत्पादन माहिती
तपशील:
- कोड:
- ६५१७ एफआर ओरिजिनल #२
- ६५१८ एफआर ओरिजिनल #३/#४
- ६५१९ एफआर स्पेशल
- ६५२० इबानेझ-शैली
- उत्पादन परिमाणे:
- लांबी: 43.00 मिमी / 1.693 इंच
- जाडी: 15.40 मिमी / 0.606 इंच
- उंची: 7.50 मिमी / 0.295 इंच
(वेगवेगळ्या मॉडेल्ससाठी अतिरिक्त परिमाणे दिली आहेत)
- ई ते ई:
प्रत्येक मॉडेलसाठी दिलेली मोजमापे - त्रिज्या:
२५४ मिमी / १० इंच (बहुतेक मॉडेल्ससाठी)
उत्पादन वापर सूचना
अन-लॉक नट इंस्टॉलेशन मार्गदर्शक:
- पायरी 1: Follow instructions for low E and high E gap measurements.
- पायरी 2: Perform the specified actions for step 2.
- पायरी 3: Continue with the instructions for step 3.
- पायरी 4: Adjust the gap for low E and high E as per the provided values.
- पायरी 5: Proceed with step 5 of the installation process.
- पायरी 6: Finalize the installation process following step 6.
टीप: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.
संपर्क माहिती:
- Webसाइट: www.graphtech.com
- ईमेल समर्थन: support@graphtech.com
- दूरध्वनी सपोर्ट: ५७४-५३७-८९०० एक्सट 130
To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webसाइट
वैशिष्ट्ये
- Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
- Waaaaay easier string bends on the Ist to 5th string positions.
- Faster string changes.
- 80% reduced headstock weight.
- No more Allen keys for your nut.
- Improved string to headstock connection (You’ll feel this the first time you play).
- Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
- The ability to tweak string heights, just like a regular nut.
- 10,12, and 16-inch radius available (more models on the way).
AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)
अन-लॉक नट इन्स्टॉलेशन मार्गदर्शक
- पायरी 1
Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.
- पायरी 2
If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.
- पायरी 3
When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.
- पायरी 4
See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.
- RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″
- पायरी 6
Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.
कंपनी बद्दल
- Webसाइट:
www.graphtech.com - समर्थन:
support@graphtech.com - दूरध्वनी सपोर्ट:
५७४-५३७-८९०० एक्सट 130
ग्राफ टेक उत्पादनांसाठी उत्पादन मोजमाप आणि स्थापना सूचना डाउनलोड करण्यासाठी, आमच्या वरच्या मेनूमधील सपोर्ट विभागाखालील मदत केंद्र लिंक शोधा. webसाइट
वारंवार विचारले जाणारे प्रश्न
मी हे उत्पादन कोणत्याही प्रकारच्या गिटारसोबत वापरू शकतो का?
The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.
What do I do if I encounter issues during installation?
In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.
कागदपत्रे / संसाधने
 |
ग्राफ टेक अन-लॉक नट स्ट्रिंग स्लॉटेड [pdf] सूचना पुस्तिका ६५१७, ६५१८, ६५१९, ६५२०, अन-लॉक नट स्ट्रिंग स्लॉटेड, अन-लॉक, नट स्ट्रिंग स्लॉटेड, स्ट्रिंग स्लॉटेड, स्लॉटेड |