Graph Tech Un-Lock Nut String Slotted

Fa'amatalaga o oloa

Fa'amatalaga:

• fa'ailoga:
  • 6517 FR Original #2
  • 6518 FR Original #3/#4
  • 6519 FR Faapitoa
  • 6520 IBANEZ-style
• Fua o Mea:
  • Umi: 43.00 mm / 1.693 ini
  • Mafiafia: 15.40 mm / 0.606 ini
  • Maualuluga: 7.50 mm / 0.295 ini
    (O fua fa'aopoopo ua saunia mo fa'ata'ita'iga 'ese'ese)
• E TO E:
  Fua ua saunia mo faʻataʻitaʻiga taʻitasi
• Radius:
  254 mm / 10 in (mo le tele o faʻataʻitaʻiga)

Fa'atonuga o le Fa'aaogaina o Mea

Ta'iala Fa'apipi'i Nut Tatala Loka:

1. Laasaga 1: Follow instructions for low E and high E gap measurements.
2. Laasaga 2: Perform the specified actions for step 2.
3. Laasaga 3: Continue with the instructions for step 3.
4. Laasaga 4: Adjust the gap for low E and high E as per the provided values.
5. Laasaga 5: Proceed with step 5 of the installation process.
6. Laasaga 6: Finalize the installation process following step 6.
   Fa'aaliga: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Fa'amatalaga Fa'afeso'ota'i:

• Webnofoaga: www.graphtech.com
• Fesoasoani ile imeli: support@graphtech.com
• Telefoni Lagolago: 604-940-5353 isi 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webnofoaga.

FAAMATALAGA

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

TA'iala FA'ATA'I NAU LOKA

• LAASAGA 1
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• LAASAGA 2
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• LAASAGA 3
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• LAASAGA 4
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• LAASAGA 6
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

E UIGA I KAMUPANI

• Webnofoaga:
  www.graphtech.com
• Lagolago:
  support@graphtech.com
• Telefoni Lagolago:
  604-940-5353 isi 130
  Ina ia sii mai fua o oloa ma faʻatonuga faʻapipiʻi mo oloa Graph Tech, suʻe le fesoʻotaʻiga Help Center i lalo o le vaega Lagolago i le lisi pito i luga i la matou webnofoaga.

FAQ

E mafai ona ou fa'aogaina lenei oloa i so'o se ituaiga kitara?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Pepa / Punaoa

Graph Tech Un-Lock Nut String Slotted [pdf] Tusi Taiala 6517, 6518, 6519, 6520, Tatala Loka Manoa Nati So'a, Tatala Loka, No'a Nati So'a, Nonoa Fa'amau, Fa'ataga.

Fa'asinomaga

• Tusi Taiala