Graph Tech Unlock Moer String Slotted
Produkt ynformaasje
Spesifikaasjes:
- KOADE:
- 6517 FR Orizjineel #2
- 6518 FR Orizjineel #3/#4
- 6519 FR Spesjaal
- 6520 IBANEZ-styl
- Produkt Ofmjittings:
- Lingte: 43.00 mm / 1.693 yn
- Dikte: 15.40 mm / 0.606 yn
- Hichte: 7.50 mm / 0.295 yn
(Ekstra ôfmjittings foar ferskate modellen)
- E nei E:
Mjittingen foar elk model levere - Straal:
254 mm / 10 inch (foar de measte modellen)
Produkt Usage Ynstruksjes
Ynstallaasjegids foar ûntskoattelmoer:
- STAP 1: Follow instructions for low E and high E gap measurements.
- STAP 2: Perform the specified actions for step 2.
- STAP 3: Continue with the instructions for step 3.
- STAP 4: Adjust the gap for low E and high E as per the provided values.
- STAP 5: Proceed with step 5 of the installation process.
- STAP 6: Finalize the installation process following step 6.
Noat: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.
Kontakt ynformaasje:
- Website: www.graphtech.com
- E-post stipe: support@graphtech.com
- Tel. stipe: 604-940-5353 ekst 130
To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the website.
FEATURES
- Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
- Waaaaay easier string bends on the Ist to 5th string positions.
- Faster string changes.
- 80% reduced headstock weight.
- No more Allen keys for your nut.
- Improved string to headstock connection (You’ll feel this the first time you play).
- Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
- The ability to tweak string heights, just like a regular nut.
- 10,12, and 16-inch radius available (more models on the way).
AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)
YNSTALLAASJEHANDLEIDING FOAR DE ONTSLAGMOER
- STAP 1
Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.
- STAP 2
If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.
- STAP 3
When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.
- STAP 4
See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.
- RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″
- STAP 6
Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.
OVER COMPANY
- Website:
www.graphtech.com - Stypje:
support@graphtech.com - Tel. stipe:
604-940-5353 ekst 130
Om produktmjittingen en ynstallaasje-ynstruksjes foar Graph Tech-produkten te downloaden, fine jo de Help Center-keppeling ûnder de Stipe-seksje yn it boppeste menu op ús ... website.
FAQ
Kin ik dit produkt brûke mei elk type gitaar?
The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.
What do I do if I encounter issues during installation?
In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.
Dokuminten / Resources
 |
Graph Tech Unlock Moer String Slotted [pdf] Ynstruksjehânlieding 6517, 6518, 6519, 6520, Untskoattele moerstring mei sleuf, Untskoattele, Moerstring mei sleuf, String mei sleuf, mei sleuf |