Graph Tech Un-Lock Matice String s drážkou
Informace o produktu
Specifikace:
- KÓD:
- 6517 FR Originál #2
- 6518 FR Originál #3/#4
- 6519 FR Speciální
- 6520 ve stylu IBANEZ
- Rozměry produktu:
- Délka: 43.00 mm / 1.693 palců
- Tloušťka: 15.40 mm / 0.606 palců
- Výška: 7.50 mm / 0.295 palců
(Další rozměry jsou uvedeny pro různé modely)
- V DO V:
Rozměry uvedené pro každý model - Poloměr:
254 mm / 10 palců (pro většinu modelů)
Návod k použití produktu
Návod k instalaci pojistné matice:
- KROK 1: Follow instructions for low E and high E gap measurements.
- KROK 2: Perform the specified actions for step 2.
- KROK 3: Continue with the instructions for step 3.
- KROK 4: Adjust the gap for low E and high E as per the provided values.
- KROK 5: Proceed with step 5 of the installation process.
- KROK 6: Finalize the installation process following step 6.
Poznámka: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.
Kontaktní údaje:
- Webmísto: www.graphtech.com
- E-mailová podpora: support@graphtech.com
- Telefonní podpora: 604-940-5353 ext 130
To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webmísto.
VLASTNOSTI
- Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
- Waaaaay easier string bends on the Ist to 5th string positions.
- Faster string changes.
- 80% reduced headstock weight.
- No more Allen keys for your nut.
- Improved string to headstock connection (You’ll feel this the first time you play).
- Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
- The ability to tweak string heights, just like a regular nut.
- 10,12, and 16-inch radius available (more models on the way).
AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)
NÁVOD K MONTÁŽI ODJISTĚNÉ POJISTNÉ MATICE
- KROK 1
Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.
- KROK 2
If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.
- KROK 3
When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.
- KROK 4
See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.
- RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″
- KROK 6
Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.
O SPOLEČNOSTI
- Webmísto:
www.graphtech.com - Podpora:
support@graphtech.com - Telefonní podpora:
604-940-5353 ext 130
Chcete-li si stáhnout rozměry produktů a pokyny k instalaci produktů Graph Tech, vyhledejte odkaz na Centrum nápovědy v sekci Podpora v horní nabídce na naší webmísto.
FAQ
Mohu tento produkt použít s jakýmkoliv typem kytary?
The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.
What do I do if I encounter issues during installation?
In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.
Dokumenty / zdroje
 |
Graph Tech Un-Lock Matice String s drážkou [pdfNávod k obsluze 6517, 6518, 6519, 6520, Odjisticí matice s drážkou, Odjisticí matice s drážkou, Drážkovaná matice s drážkou, Drážkovaná matice |