Graph Tech Un-Lock Nut String Slotted
Інформація про продукт
Технічні характеристики:
- КОД:
- 6517 FR Original #2
- 6518 FR Original #3/#4
- 6519 FR Special
- 6520 IBANEZ-style
- Розміри продукту:
- Довжина: 43.00 мм / 1.693 дюйма
- Товщина: 15.40 мм / 0.606 дюйма
- Висота: 7.50 мм / 0.295 дюйма
(Additional dimensions provided for different models)
- E TO E:
Measurements provided for each model - радіус:
254 mm / 10 in (for most models)
Інструкція з використання продукту
Un-Lock Nut Installation Guide:
- КРОК 1: Follow instructions for low E and high E gap measurements.
- КРОК 2: Perform the specified actions for step 2.
- КРОК 3: Continue with the instructions for step 3.
- КРОК 4: Adjust the gap for low E and high E as per the provided values.
- КРОК 5: Proceed with step 5 of the installation process.
- КРОК 6: Finalize the installation process following step 6.
Примітка: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.
Контактна інформація:
- Webсайт: www.graphtech.com
- Підтримка електронною поштою: support@graphtech.com
- Tel Support: 604-940-5353 доб 130
To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the webсайт.
ОСОБЛИВОСТІ
- Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
- Waaaaay easier string bends on the Ist to 5th string positions.
- Faster string changes.
- 80% reduced headstock weight.
- No more Allen keys for your nut.
- Improved string to headstock connection (You’ll feel this the first time you play).
- Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
- The ability to tweak string heights, just like a regular nut.
- 10,12, and 16-inch radius available (more models on the way).
AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)
UN-LOCK NUT INSTALLATION GUIDE
- КРОК 1
Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.
- КРОК 2
If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.
- КРОК 3
When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.
- КРОК 4
See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.
- RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″
- КРОК 6
Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.
ПРО КОМПАНІЮ
- Webсайт:
www.graphtech.com - підтримка:
support@graphtech.com - Tel Support:
604-940-5353 доб 130
To download product measurements and installation instructions for Graph Tech products, find the Help Center link under the Support section in the top menu on our webсайт.
FAQ
Чи можу я використовувати цей продукт з будь-яким типом гітари?
The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.
What do I do if I encounter issues during installation?
In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.
Документи / Ресурси
 |
Graph Tech Un-Lock Nut String Slotted [pdfІнструкція з експлуатації 6517, 6518, 6519, 6520, Un-Lock Nut String Slotted, Un-Lock, Nut String Slotted, String Slotted, Slotted |