Graph Tech Un-Lock Nut String Slotted

Informacija apie produktą

Specifikacijos:

• KODAS:
  • 6517 FR Original #2
  • 6518 FR Original #3/#4
  • 6519 FR Special
  • 6520 IBANEZ-style
• Gaminio matmenys:
  • Ilgis: 43.00 mm / 1.693 coliai
  • Storis: 15.40 mm / 0.606 coliai
  • Aukštis: 7.50 mm / 0.295 coliai
    (Additional dimensions provided for different models)
• E TO E:
  Measurements provided for each model
• Spindulys:
  254 mm / 10 in (for most models)

Produkto naudojimo instrukcijos

Un-Lock Nut Installation Guide:

1. 1 ŽINGSNIS: Follow instructions for low E and high E gap measurements.
2. 2 ŽINGSNIS: Perform the specified actions for step 2.
3. 3 ŽINGSNIS: Continue with the instructions for step 3.
4. 4 ŽINGSNIS: Adjust the gap for low E and high E as per the provided values.
5. 5 ŽINGSNIS: Proceed with step 5 of the installation process.
6. 6 ŽINGSNIS: Finalize the installation process following step 6.
   Pastaba: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Kontaktinė informacija:

• Websvetainė: www.graphtech.com
• Pagalba el. paštu: support@graphtech.com
• Tel Support: 604-940-5353 ext 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the websvetainę.

SAVYBĖS

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

UN-LOCK NUT INSTALLATION GUIDE

• 1 ŽINGSNIS
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• 2 ŽINGSNIS
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• 3 ŽINGSNIS
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• 4 ŽINGSNIS
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• 6 ŽINGSNIS
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

APIE ĮMONĘ

• Websvetainė:
  www.graphtech.com
• Palaikymas:
  support@graphtech.com
• Tel Support:
  604-940-5353 ext 130
  To download product measurements and installation instructions for Graph Tech products, find the Help Center link under the Support section in the top menu on our websvetainę.

DUK

Ar galiu naudoti šį gaminį su bet kokio tipo gitara?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Dokumentai / Ištekliai

Graph Tech Un-Lock Nut String Slotted [pdfNaudojimo instrukcija 6517, 6518, 6519, 6520, Un-Lock Nut String Slotted, Un-Lock, Nut String Slotted, String Slotted, Slotted

Nuorodos

• Vartotojo vadovas