Graph Tech Rêza Gwîza Vekirina Qefilandî ya Bi Çolê

Agahiya hilberê

Specifications:

• NAVÊ DIZÎ:
  • 6517 FR Orjînal #2
  • 6518 FR Orjînal #3/#4
  • 6519 FR Taybet
  • 6520 bi şêwaza IBANEZ
• Mezinahiyên hilberê:
  • Dirêjî: 43.00 mm / 1.693 in
  • Qewîtî: 15.40 mm / 0.606 in
  • Bilindî: 7.50 mm / 0.295 in
    (Ji bo modelên cûda pîvanên zêde hatine peyda kirin)
• E BO E:
  Pîvanên ji bo her modelê hatine peyda kirin
• Çap:
  254 mm / 10 înç (ji bo piraniya modelan)

Talîmatên Bikaranîna Product

Rêbernameya Sazkirina Gwîza Vekirî:

1. ASTA 1Ê: Follow instructions for low E and high E gap measurements.
2. ASTA 2Ê: Perform the specified actions for step 2.
3. ASTA 3Ê: Continue with the instructions for step 3.
4. ASTA 4Ê: Adjust the gap for low E and high E as per the provided values.
5. ASTA 5Ê: Proceed with step 5 of the installation process.
6. ASTA 6Ê: Finalize the installation process following step 6.
   Not: For additional assistance and compatibility, use the Total Control & Precision Locking Machine Heads from Graph Tech in conjunction with the Un-Lock Nut.

Agahiyên Têkilî:

• Webmalper: www.graphtech.com
• Piştgiriya E-nameyê: support@graphtech.com
• Piştgiriya Telefonê: 604-940-5353 ext 130
  To download additional product measurements and installation instructions, visit the Help Center link under the Support section on the website.

TAYBETÎ

• Optimally ramped and angled string slot design (distributes the string tension over the entire string ramp), which allows us to triple the lubrication.
• Waaaaay easier string bends on the Ist to 5th string positions.
• Faster string changes.
• 80% reduced headstock weight.
• No more Allen keys for your nut.
• Improved string to headstock connection (You’ll feel this the first time you play).
• Straightforward upgrade, a final tweak on sanding to flush fit with the edge of the fingerboard, and a drop of white glue.
• The ability to tweak string heights, just like a regular nut.
• 10,12, and 16-inch radius available (more models on the way).
  AND, you can finally tweak and tune with your machine heads (locking machine heads recommended, but not mandatory)

  
  

RÊBERNAMEYA SAZKIRINA GÛZÊN VEKIRÎ

• ASTA 1Ê
  Remove the strings. Score around every edge of the nut with an exacto knife to prevent lacquer from sticking to the nut or the neck and chipping away.

  

• ASTA 2Ê
  If the nut is not sitting in a slot, usually a light tap with a small block will set it free. If it is sitting in a slot, gently tap it out sideways using a hammer and a screwdriver.

  

• ASTA 3Ê
  When it is sticking out the side, pull it out in the same direction with a pair of pliers, like you would a tooth. Scrape or file the nut slot free from old glue and finish residue while making sure that the slot remains square.

  

• ASTA 4Ê
  See if your new Graph Tech nut fits into the slot without force. If it’s too thick, place a 400600-gritgrit sandpaper face up on a flat surface and sand down the sides of the nut until it fits in the slot snugly, but is easily removable.

  

• RetuReturn thernthe high and low E strings tto verify therify the correct height. Pushing down on the third note of the low E string should result in a .010″ gap between the string and the first fret; the high E string should be .006″

  

• ASTA 6Ê
  Once you’ve adjusted the thickness and the height, you just need to sand the ends of the nut so that they are flush with the neck. Use a pencil to mark the ends of the nut that are sticking out. Remove it from the neck and sand it to the marks.

  

DERBARÊ COMPANY

• Webmalper:
  www.graphtech.com
• Alîkarî:
  support@graphtech.com
• Piştgiriya Telefonê:
  604-940-5353 ext 130
  Ji bo dakêşana pîvanên hilberê û rêwerzên sazkirinê yên hilberên Graph Tech, girêdana Navenda Alîkariyê di bin beşa Piştgiriyê de di menuyê jorîn de li ser malpera me bibînin. website.

FAQ

Ma ez dikarim vê hilberê bi her celeb gîtarê re bikar bînim?

The product is designed to be compatible with various guitar models, but please ensure compatibility with your specific guitar type before installation.

What do I do if I encounter issues during installation?

In case of any installation difficulties or issues, please reach out to our support team for assistance and guidance.

Belge / Çavkanî

Graph Tech Rêza Gwîza Vekirina Qefilandî ya Bi Çolê [pdf] Rêbernameya Rêwerzan 6517, 6518, 6519, 6520, Rêza Gwîzê ya Vekirî ya Bi Çal, Vekirî, Rêza Gwîzê ya Bi Çal, Rêz a Bi Çal, Bi Çal

Çavkanî

• Manual Bikarhêner