FLOWLINE LC92 Series Remote Level Isolation Controller

Intshayelelo

I-LC90 & LC92 Series Controllers ngabalawuli benqanaba lokuhlala bodwa abayilelwe ukusetyenziswa kunye nezixhobo ezikhuselekileyo ngaphakathi. Intsapho yomlawuli inikezelwa kwimimiselo emithathu yokulawula impompo kunye ne-valve. Uluhlu lwe-LC90 lubonisa imveliso enye ye-10A SPDT ye-relay kwaye inokwamkela i-sensor yenqanaba enye njengegalelo. Uluhlu lwe-LC92 luquka zombini i-10A SPDT enye kunye ne-10A yokuLatching SPDT enye i-relay. Le phakheji ivumela inkqubo yokufaka ezintathu ezinokuthi zenze imisebenzi ezenzekelayo (izalise okanye ingenanto) kunye nokusebenza kwe-alarm (phezulu okanye ephantsi). Uluhlu lwe-LC92 lunokuba ngumlawuli we-input-input onokwenza i-alamu ezimbini (i-2-phezulu, i-2-ephantsi okanye i-1-phezulu, i-1-ephantsi). Ipakethe nokuba uthotho lomlawuli kunye nenqanaba lokutshintsha izinzwa kunye nezixhobo.

IIMBONAKALO

• Ukulawulwa kwe-Fail-Safe relay yeempompo, iivalvu okanye i-alamu kunye nokulibaziseka kwe-0.15 ukuya kwi-60-yesibini
• I-polypropylene enclosure inokuthi ifakwe kwi-DIN kaloliwe okanye ipaneli yangasemva inyuswe.
• Ukuseta ngokulula kunye nezalathi ze-LED zenzwa (s), amandla kunye nemo ye-relay.
• Guqulela utshintsho kwimo yokudlulisa ukusuka ku-NO ukuya kwi-NC ngaphandle kokudibanisa kwakhona.
• I-AC inikwe amandla

Iinkcukacha / Imilinganiselo

• Ukubonelela ngevoltage: 120 / 240 VAC, 50 - 60 Hz.
• Ukusetyenziswa: 5 Watts max.
• Izimvo zoluvo:
  • I-LC90: (1) utshintsho lwenqanaba
  • I-LC92: (1, 2 okanye 3) utshintsho kwinqanaba
• Ubonelelo lwenzwa: 13.5 VDC @ 27 mA ngegalelo ngalinye
• Isibonisi se-LED: Isivamvo, udluliselo kunye nobume bamandla
• Uhlobo loqhagamshelwano:
  • I-LC90: (1) SPDT Relay
  • I-LC92: (2) Ukuhanjiswa kwe-SPDT, i-1 Latching
• Ukalo loqhagamshelwano: 250 VAC, 10A
• Iziphumo zoqhagamshelwano: Ekhethiweyo HAYI okanye NC
• Ilatshi yoqhagamshelwano: Khetha Vula/Vala (LC92 kuphela)
• Ukulibaziseka koqhagamshelwano: 0.15 ukuya 60 imizuzwana
• Ubushushu bombane:
  • F: -40 ° ukuya ku-140 °
  • C: -40 ° ukuya ku-60 °
• Ukalisho lweNdawo: 35mm DIN (EN 50 022)
• Imathiriyeli evalekileyo: I-PP (UL 94 VO)
• Ukuhlelwa: Izixhobo ezinxulumeneyo
• Izamkelo: CSA, LR 79326
• Ukhuseleko:
  • Udidi I, Amaqela A, B, C & D;
  • Udidi II, Amaqela E, F & G;
  • Udidi III
• Iiparamitha:
  • Voc = 17.47 VDC;
  • Isc = 0.4597A;
  • Ca = 0.494μF;
  • La = 0.119 mH

IINCWADI ZOKULAWULI:

IMILINGANISELO:

IDIAGRAM YOLAWULO:

ULAWULO LABEL:

ImiGaqo yoKhuseleko

• Malunga nale ncwadana: NCEDA UYIFUNDE YONKE INCWADANA YEENKONZO PHAMBI KOKUFAKA OKANYE USEBENZISE LE MVELISO. Le ncwadana ibandakanya ulwazi kwiimodeli ezintathu ezahlukeneyo zeRemote Isolation Relay Controllers ukusuka kwi-FLOWLINE: LC90 kunye ne-LC92 series. Imiba emininzi yofakelo kunye nokusetyenziswa iyafana phakathi kweemodeli ezintathu. Apho bahluke khona, incwadi yesikhokelo iya kuyiqaphela. Nceda ubhekisele kwinombolo yenxalenye yesilawuli oyithengileyo njengoko ufunda.
• Uxanduva loMsebenzisi kuKhuseleko: I-FLOWLINE yenza iimodeli ezininzi zokulawula, kunye nokunyuka okwahlukileyo kunye nokutshintshwa kohlengahlengiso. Luxanduva lomsebenzisi ukukhetha imodeli yesilawuli esifanelekileyo kwisicelo, siyifake ngokufanelekileyo, senze iimvavanyo zesixokelelwano esifakelweyo, kwaye sigcine onke amacandelo.
• Isilumkiso esiKhethekileyo soFakelo oluKhuselekileyo lwangaphakathi: I-DC-powered sensors akufuneki isetyenziswe kunye nolwelo oluqhumayo okanye olunokutsha ngaphandle kokuba inikwe amandla sisilawuli esikhuselekileyo esifana nothotho lwe-LC90. "Ikhuselekile ngaphakathi" kuthetha ukuba isilawuli se-LC90 siyilwe ngokukodwa ukuze phantsi kweemeko eziqhelekileyo iitheminali zokufaka inzwa azikwazi ukuhambisa ivolthi engakhuselekanga.tagenokubangela ukusilela koluvo kwaye idale ugqabhuko-dubulo kubukho bomxube othile we-atmospheri womphunga oyingozi. Kuphela icandelo loluvo lwe-LC90 likhuselekile ngokwangaphakathi. Umlawuli ngokwawo akakwazi ukunyuswa kwindawo enobungozi okanye eqhumayo, kwaye amanye amacandelo esiphaluka (i-AC amandla kunye ne-relay output) azenzelwe ukudibanisa kwiindawo ezinobungozi.
• Landela IiNkqubo zokuFakelo eziKhuselekileyo: I-LC90 kufuneka ifakwe ngokuhambelana nazo zonke iikhowudi zengingqi kunye nelizwe, ngokulandela izikhokelo zeKhowudi yoMbane yeSizwe (NEC) zakutsha nje, ngabasebenzi abanelayisenisi abanamava ofakelo olukhuselekileyo lwangaphakathi. Umzekeloample, intambo yoluvo (ii) kufuneka idlule kwi-conduit umphunga wetywina lokulinganisa ukuze kugcinwe umqobo phakathi kwendawo enobungozi kunye nengeyongozi. Ukongeza, intambo yoluvo (ii) ayinakuhamba kuyo nayiphi na i-conduit okanye ibhokisi yesiphambuka ekwabelwana ngayo ngeentambo ezingakhuselekanga ngaphakathi. Ukufumana iinkcukacha ezithe vetshe, qhagamshelana ne-NEC.
• Gcina i-LC90 ikwiMeko eKhuselekileyo ngokwangaphakathi: Ukuguqulwa kwe-LC90 kuya kuchitha iwaranti kwaye kunokubeka esichengeni uyilo olukhuselekileyo lwangaphakathi. Iindawo ezingagunyaziswanga okanye ukulungiswa kuya kuphelisa iwaranti kunye nemeko ekhuselekileyo ye-LC90.

KUBALULEKILEYO
Musa ukuqhagamshela naziphi na ezinye izixhobo (ezifana nedatha egciniweyo okanye esinye isixhobo somlinganiselo) kwitheminali yoluvo, ngaphandle kokuba iprobe yomlinganiselo ithelekelwe ngokukhuselekileyo ngaphakathi. Ufakelo olungafanelekanga, uhlengahlengiso, okanye ukusetyenziswa kothotho lweLC90 kufakelo olufuna izixhobo ezikhuselekileyo ngaphakathi kunokubangela umonakalo wepropathi, ukwenzakala emzimbeni okanye ukufa. I-FLOWLINE, Inc. ayisayi kuba noxanduva lwawo nawaphi na amabango etyala ngenxa yofakelo olungafanelekanga, uhlengahlengiso, ukulungiswa okanye ukusetyenziswa kothotho lwe-LC90 ngamanye amaqela.

• INgozi yoMbane wokothuka: Kuyenzeka ukuba uqhagamshelane namacandelo kwisilawuli esithwala ivolthi ephezulutage, kubangela ukwenzakala kakhulu okanye ukufa. Onke amandla kumlawuli kunye neesekethe (ii) relay ezilawulayo kufuneka zicinywe ngaphambi kokusebenza kumlawuli. Ukuba kuyimfuneko ukwenza uhlengahlengiso ngexesha lokusebenza kombane, sebenzisa ukuqaphela okukhulu kwaye usebenzise kuphela izixhobo ezifakwe kwi-insulated. Ukwenza uhlengahlengiso kubalawuli abanikwe amandla akukhuthazwa. Iingcingo kufuneka zenziwe ngabasebenzi abaqeqeshiweyo ngokuhambelana nazo zonke iikhowudi zombane zelizwe, zombuso kunye nezengingqi.
• Faka kwindawo eyomileyo: Indlu yomlawuli ayenzelwanga ukuntywiliselwa. Xa ifakwe ngokufanelekileyo, kufuneka ifakwe ngendlela yokuba ingadibanisi ngokuqhelekileyo nolwelo. Jonga kwireferensi yoshishino ukuqinisekisa ukuba iikhompawundi ezinokutshiza kwizindlu zomlawuli aziyi kuwonakalisa. Umonakalo onjalo awufakwanga kwiwaranti.
• URelay Qhagamshelana Ukala: Ireyiyi ithelekelwe i-10 amp umthwalo ochasayo. Imithwalo emininzi (efana nemoto ngexesha lokuqalisa okanye izibane ze-incandescent) iyaphinda isebenze kwaye inokuba neempawu zangoku ezinokuthi zibe li-10 ukuya kuma-20 kumlinganiselo wazo womthwalo ozinzileyo. Ukusetyenziswa kwesekethe yokhuseleko loqhagamshelwano kunokuba yimfuneko kufakelo lwakho ukuba i-10 amp ukureyitha akuboneleli nge ampUmda wemisinga yokugxalathelana okunjalo.
• Yenza iNkqubo yoKhuseleko olungaphumeleliyo: Yila inkqubo engaphumeleliyo evumela ukuba kunokwenzeka ukugqithiswa kombane okanye ukusilela kombane. Ukuba umbane ucinyiwe kumlawuli, uya kukhupha amandla kwi-relay. Qinisekisa ukuba imeko yokuphelelwa amandla kwi-relay yimeko ekhuselekileyo kwinkqubo yakho. Umzekeloample, ukuba amandla omlawuli alahlekile, impompo yokuzalisa itanki iya kucima ukuba idityaniswe kwicala le Ngokuqhelekileyo Vula i-relay.

Ngelixa i-relay yangaphakathi ithembekile, ekuhambeni kwexesha ukusilela kwe-relay kunokwenzeka ngeendlela ezimbini: phantsi komthwalo onzima abafowunelwa banoku "welded" okanye banamathele kwindawo esebenzayo, okanye ukubola kunokwakhela kumfowunelwa ukuze kube njalo. ungagqibi isekethi xa kufanelekile. Kwizicelo ezibalulekileyo, iinkqubo zokugcina ezingafunekiyo kunye nee-alamu kufuneka zisetyenziswe ngaphezu kwenkqubo ephambili. Ezo nkqubo zogcino kufuneka zisebenzise iiteknoloji ezahlukeneyo zoluvo apho kunokwenzeka.
Ngelixa le ncwadana ibonelela nge examples kunye neengcebiso ukunceda ukuchaza ukusebenza kweemveliso FLOWLINE, ezifana exampLes zezolwazi kuphela kwaye azenzelwanga njengesikhokelo esipheleleyo sokuhlohla nayiphi na inkqubo ethile.

Ndiyaqalisa

IZIQULATHO: 

Inombolo yendawo	Amandla	Igalelo	iiAlarm Relays	Latching Relays	Umsebenzi
LC90-1001	120 VAC	1	1	0	Inqanaba eliphezulu, iNqanaba eliPhantsi okanye ukuKhuselwa kweMpompo
LC90-1001-E	240 VAC
LC92-1001	120 VAC	3	1	1	Ialam (uRelay 1)     -Inqanaba eliphezulu, iNqanaba eliPhantsi okanye ukuKhuselwa kweMpompo UkuLatching (Relay 2) -Ukuzalisa okuzenzekelayo, okungenanto, iNqanaba eliPhezulu, iNqanaba eliPhantsi okanye uKhuseleko lweMpompo.
LC92-1001-E	240 VAC

240 UKHETHO lweVAC:
Xa u-odola nayiphi na inguqulo ye-240 VAC yochungechunge lwe-LC90, inzwa iya kufika ilungiselelwe ukusebenza kwe-240 VAC. Iinguqulelo ezingama-240 ze-VAC ziya kubandakanya a –E kwinani lenxalenye (okt LC90-1001-E).

IIMPAWU ZEFAKALO ELINYE ELIPHAKAMILEYO OKANYE ELIPHANTSI:
IiRelay zoNgeniso eziNye zenzelwe ukufumana umqondiso ovela kwinzwa yolwelo enye. Ijika i-relay yayo yangaphakathi IVULIWE okanye iValiwe (njengoko isetwe yi-invert switch) ekuphenduleni ubukho bolwelo, kwaye itshintsha imo ye-relay emva kwakhona xa inzwa yomile.

• I-Alam ephezulu:
  Ukuguqulela KUVALIWE. I-Relay iya kunika amandla xa iswitshi ibaMmanzi kwaye iya kuphelisa amandla xa iswitshi iba Yoma (ngaphandle kolwelo).
• IAlam ephantsi:
  Ukuguqula KUVULIWE. I-Relay iya kunika amandla xa iswitshi iba Yoma (ngaphandle kolwelo) kwaye iya kuphelisa amandla xa iswitshi isiba manzi.

UNgeniso oluNye loNikezelo lunokusetyenziswa phantse kulo naluphi na uhlobo lomqondiso woluvo: imvakalelo yangoku okanye ukuvalwa koqhagamshelwano. I-relay yipali enye, uhlobo lokuphoswa kabini; isixhobo esilawulwayo sinokudityaniswa nokuba kwicala eliqhelekileyo elivulekileyo okanye eliqhelekileyo elivaliweyo le-relay. Ukulibaziseka kwexesha ukusuka kwi-0.15 ukuya kumasekhondi angama-60 kunokusetwa ngaphambi kokuba i-relay iphendule kwigalelo lenzwa. Usetyenziso oluqhelekileyo lwe-Single Input Relays lumgangatho ophezulu okanye umgangatho ophantsi wokutshintsha / ukusebenza kwe-alarm (ukuvulwa kwevalve yokukhupha nanini na xa umgangatho wolwelo unyuka ukuya kwindawo yoluvo) kunye nokufumanisa ukuvuza (ukukhala kwe-alam xa kufunyaniswa ukuvuza, njl. njl.).

IIMPAWU ZOKUFAKA OKUMBINI NGOKUZENZAKALELAYO/UBUDLALI OBUNGENANTO:
I-Dual Input Automatic Fill / Empty Relay (i-LC92 series kuphela) yenzelwe ukufumana imiqondiso evela kwiinzwa ezimbini zolwelo. Ijika i-relay yayo yangaphakathi IVULIWE okanye iValiwe (njengoko isetwe yi-invert switch) ekuphenduleni ubukho bolwelo kuzo zombini izinzwa, kwaye itshintsha imo yerelay umva kwakhona xa zombini abenzi boluvo bomile.

• Ilize ngokuzenzekela:
  I-Latch IVULIWE kwaye i-Invert ivaliwe. I-Relay iya kunika amandla xa inqanaba lifikelela kwi-switch ephezulu (zombini izitshintshi zimanzi). I-Relay iya kuphelisa amandla xa inqanaba lingaphantsi kokutshintsha okusezantsi (zombini iiswitshi zomile).
• ukuzalisa ngokuzenzekela:
  I-Latch IVULIWE kwaye i-Invert IVULIWE. I-Relay iya kunika amandla xa inqanaba lingaphantsi kokutshintsha okusezantsi (zombini iiswitshi zomile). I-Relay iya kunciphisa amandla xa inqanaba lifikelela kwi-switch ephezulu (zombini iiswitshi zimanzi).

I-Dual Input Automatic Fill / Empty Relay inokusetyenziswa phantse naluphi na uhlobo lwesignali yoluvo: imvakalelo yangoku okanye ukuvalwa koqhagamshelwano. I-relay yipali enye, uhlobo lokuphoswa kabini; isixhobo esilawulwayo sinokudityaniswa nokuba kwicala eliqhelekileyo elivulekileyo okanye eliqhelekileyo elivaliweyo le-relay. Ukulibaziseka kwexesha ukusuka kwi-0.15 ukuya kwi-60 imizuzwana kunokusetwa ngaphambi kokuba i-relay iphendule kwigalelo lenzwa. Izicelo eziqhelekileyo ze-Dual Input Relays zizaliswa ngokuzenzekelayo (ukuqala umpompo wokuzalisa kwinqanaba eliphantsi kunye nokumisa umpompo kwinqanaba eliphezulu) okanye imisebenzi yokukhupha ngokuzenzekelayo (ukuvula i-valve yokukhupha kwinqanaba eliphezulu kunye ne-valve yokuvala kwinqanaba eliphantsi).

ISIKHOKELO KULAWULO:
Ngezantsi ludweliso kunye nendawo yamacandelo ahlukeneyo omlawuli:

1. Isalathisi samandla: Le LED eluhlaza izibane xa amandla AC ON.
2. Isalathisi sodluliselo: Le LED ebomvu iya kukhanya nanini na xa umlawuli enika amandla i-relay, ekuphenduleni imeko efanelekileyo kwi-input input (s) kwaye emva kokulibaziseka kwexesha.
3. Iitheminali zoMbane we-AC: Ukudityaniswa kwe-120 VAC amandla kumlawuli. Useto lungatshintshwa lube yi-240 VAC ukuba uyafunwa. Oku kufuna ukutshintsha iijumpi zangaphakathi; oku kugutyungelwe kwicandelo loFakelo lwencwadana. I-polarity (ingathathi hlangothi kwaye ishushu) ayinamsebenzi.
4. Iitheminali zodluliselo (NC, C, NO): Qhagamshela isixhobo onqwenela ukusilawula (impompo, i-alam njl.njl.) kwezi terminals: nikezela kwi-terminal ye-COM, kunye nesixhobo kwi-NO okanye i-NC terminal njengoko kufuneka. Isixhobo esitshintshiweyo kufuneka sibe ngumthwalo ongeyo-inductive ongekho ngaphezu kwe-10 amps kwimithwalo esebenzayo i-current kufuneka ikhutshwe okanye isetyenziswe iisekethe zokukhusela. Xa i-LED ebomvu i-ON kwaye i-relay ikwimeko esebenzayo, i-terminal NO iya kuvalwa kwaye i-terminal ye-NC iya kuvuleka.
5. Ukulibaziseka kwexesha: Sebenzisa i-potentiometer ukuseta ukulibaziseka ukusuka kwi-0.15 ukuya kwi-60 imizuzwana. Ukulibaziseka kwenzeka ngexesha lokutshintsha kunye nekhefu lokutshintsha.
6. Iimpawu zegalelo: Sebenzisa ezi LED ukubonisa WET okanye DRY isimo sokutshintsha. Xa iswitshi i-WET, i-LED iya kuba yi-Amber. Xa iswitshi YOMILE, i-LED iya kuba Buhlaza kukutshintsha okunamandla okanye IVIWE kukutshintsha kweengcongolo. Qaphela: Ukutshintsha kweengcongolo kunokutshintshwa kwi-WET / OFF, i-DRY / Amber LED isalathisi.
7. Iswitshi yokuguqula: Olu tshintsho lubuyisela umva ingqiqo yolawulo lwe-relay ekuphenduleni ukutshintshwa (ii): iimeko ezisetyenziselwa ukunika amandla i-relay ngoku iya kukhupha amandla kwi-relay kwaye ngokuphambeneyo.
8. I-Latch switch (uthotho lwe-LC92 kuphela): Olu tshintsho lumisela ukuba i-relay iya kwenziwa njani amandla ekuphenduleni amagalelo amabini oluvo. Xa i-LATCH IVALIWE, i-relay iphendula kwi-Input Input A kuphela; xa i-LATCH ivuliwe, i-relay iya kunika amandla okanye ikhuphe amandla kuphela xa zombini iiswitshi (A kunye no-B) zikwimeko efanayo.
   (zombini zimanzi okanye zombini zomile). I-relay iya kuhlala ibambekile de zombini iiswitshi zitshintshe iimeko.
9. Iitheminali zongeniso: Qhagamshela iingcingo zokutshintsha kwezi terminals: Qaphela i-polarity: (+) yi-13.5 VDC, i-30 mA unikezelo lwamandla (iqhagamshelwe kucingo olubomvu lwe-FLOWLINE switch powered level), kwaye (-) yindlela yokubuya evela kuluvo ( iqhagamshelwe kucingo olumnyama lweswitshi yenqanaba le-FLOWLINE). Ngokutshintsha kwenqanaba elinamandla, ukuba iingcingo ziguqulwa, inzwa ayiyi kusebenza. Ngokutshintsha kweengcongolo, i-polarity yocingo ayinamsebenzi.

Iintambo

UKUQHAGAMSHELWA IITSHWISHI KWIINDAWO ZOKUFAKA:
Zonke iiswitshi zenqanaba le-FLOWLINE ezikhuselekileyo (ezifana nothotho lwe-LU10) ziya kudityaniswa ngocingo oluBomvu ukuya (+) terminal kunye nocingo Black ukuya kwi (-) Indawo yokukhwelela.

Isibonakaliso se-LED:
Sebenzisa ii-LED ezingaphezulu kweetheminali zokufaka ukubonisa ukuba iswitshi ikwimeko emanzi okanye eyomileyo. Ngokutshintsha okunamandla, iGreen ibonisa ukuba yomile kwaye i-Amber ibonisa ukuba imanzi. Ngokutshintsha kweengcongolo, i-Amber ibonisa ukuba imanzi kwaye akukho LED ebonisa ukuba yomile. Qaphela: izitshixo zeengcongolo zinokutsalwa ngasemva ukuze i-Amber ibonise imeko eyomileyo kwaye akukho LED ebonisa imeko emanzi.

I-RELAY KUNYE NAMANDLA IZITHAMELO
Ngokuxhomekeke kwimodeli ekhethiweyo, kuya kubakho enye okanye ezimbini iilayidi. Ileyibhile yokhutshelo lusebenza kuzo zombini iireyibhile. Itheminali nganye ineetheminali eZivulwa Ngokuqhelekileyo (NC), iCommon (C) kunye neQhosha eliVulekileyo (NO). I-relay (s) yi-(zi) yipali enye, uhlobo lokuphosa kabini (SPDT) olulinganiswe kwi-250 Volts AC, 10 Amps, 1/4 Hp.
Phawula: Abafowunelwa bodluliso ngabafowunelwa abomileyo bokwenyani. Akukho voltagifunyenwe ngaphakathi kwabafowunelwa bokudluliselwa.
Phawula: Imeko “eqhelekileyo” kuxa ikhoyili ye-relay ikhutshwa amandla kunye ne-Red relay LED icinyiwe / icinywe amandla.

I-VAC YOKUFAKA UMNXA WAMANDLA:
Indawo yoMbane ibekwe ecaleni kweRelay(s). Qwalasela ileyibhile yoBonelelo ngoMbane, echonga imfuneko yamandla (120 okanye 240 VAC) kunye neengcingo zetheminali.
Phawula: I-Polarity ayinamsebenzi ne-AC input terminal.

UKUTSHINTSHA UKUSUKA KWI-120 UKUYA KU-240 VAC:

1. Susa ipaneli yangasemva yomlawuli kwaye ulayide ngobunono ibhodi yesekethe eprintiweyo ukusuka kwindlu. Sebenzisa isilumkiso xa ususa iPCB.
2. Kufakwe iijumpi JWA, JWB kunye neJWC kwiPCB.
3. Ukutshintshela kwi-240 VAC, susa ii-jumpers kwi-JWB kunye ne-JWC kwaye ubeke i-jumper enye kwi-JWA. Ukutshintshela kwi-VAC eyi-120, susa i-jumper JWA kwaye ubeke iijumpi kwi-JWB kunye ne-JWC.
4. Buyisela ngobunono PCB kwizindlu kwaye ubuyisele ipaneli yangasemva.

240 UKHETHO lweVAC:
Xa u-odola nayiphi na inguqulo ye-240 VAC yochungechunge lwe-LC90, inzwa iya kufika ilungiselelwe ukusebenza kwe-240 VAC. Iinguqulelo ezingama-240 ze-VAC ziya kubandakanya a –E kwinani lenxalenye (okt LC90-1001-E).

Ukuhlohla

IPANEL DIN RAIL UKUNYONGA:
Isilawuli sinokuxhonywa nokuba yiphaneli yangasemva kusetyenziswa izikrufu ezibini kwimingxunya exhomayo ebekwe kwiikona zesilawuli okanye ngokukrazula isilawuli kwi-35 mm DIN Rail.

Phawula: Soloko ufaka isilawuli kwindawo apho singadibani nolwelo.

Isicelo ExampLes

I-ALARM YENQANABA ELIPHANTSI:
Injongo kukuqinisekisa ukuba umqhubi uyaziswa ukuba umgangatho wolwelo uwela ngaphantsi kwendawo ethile. Ukuba iyenzeka, i-alam iya kukhala, ilumkisa umqhubi wezinga eliphantsi. Ukutshintsha kwenqanaba kufuneka kufakwe kwindawo apho i-alamu iya kukhala khona.
Kule sicelo, utshintsho lwezinga luya kuba lumanzi lonke ixesha. Xa iqondo lokutshintsha liba Lilomile, unxibelelwano lwe-relay luya kuvala lubangela ukuba i-alamu isebenze. Imo yesiqhelo yesicelo yeyokuba umlawuli abambe i-relay ivuliwe nge-alam efakwe kwiintambo ngomfowunelwa oQhelekileyo oValiweyo. I-Relay iya kuba namandla, i-relay LED iya kuVula kwaye i-Invert iyakuCima. Xa iqondo lokutshintsha liba Lilomile, i-relay iya kwenza ukuba umfowunelwa avale ukuvumela ukuba i-alamu isebenze.

Ukwenza oku, qhagamshela ukhokelo olushushu lwe-alamu ukuya kwicala le-NC le-terminal ye-relay yomlawuli. Ukuba amandla alahlekile, i-relay iya kucinywa, kwaye i-alamu iya kuvakala (ukuba kusekho amandla kwisekethe ye-alamu ngokwayo).
Phawula: Ukuba amandla asikwe kumlawuli ngempazamo, amandla okutshintsha kwinqanaba lokwazisa umsebenzisi we-alam yomgangatho ophantsi anokulahleka. Ukuthintela oku, isiphaluka se-alamu kufuneka sibe nombane ongenakuphazamiseka okanye omnye umthombo wamandla ozimeleyo.

I-ALARM YENQANABA ELIPHEZULU:
Kwi-manor efanayo, le nkqubo ingasetyenziselwa ukukhalisa i-alamu xa ulwelo lufikelela kwinqanaba eliphezulu, kunye notshintsho nje kwindawo ye-sensor kunye nokusekwa kwe-Invert switch. I-alamu isaqhagamshelwe kwicala le-NC ye-relay ukuvumela i-alarm yokungaphumeleli kwamandla. Inzwa yome. Kule meko, sifuna ukuba i-relay inikwe amandla ukuze i-alamu ingavakali: oko kukuthi, i-Red relay LED kufuneka ivulwe nanini na i-Input LED i-Amber. Ngoko sivula i-Inverted On. Ukuba inqanaba le-fluid likhuphukela kwinqanaba eliphezulu lenzwa, inzwa iyaqhubeka, i-relay de-energizes kunye ne-alamu ikhala.

UKUKHUSELA IMPAMPU:
Isitshixo apha kukufaka iswitshi yenqanaba nje ngentla kwendawo yokuphuma kumpompo. Ngethuba nje umtshintshi umanzi, umpompo unokusebenza. Ukuba iswitshi ikhe yaba Yoma, ireyilayi iya kuvuleka ithintele impompo ekusebenzeni. Ukuthintela i-relay chatter, yongeza ukulibaziseka okuncinci kwe-relay.
Phawula: Kule sicelo, i-relay kwimpompo kufuneka ivalwe ngelixa ukutshintshwa kwinqanaba limanzi. Ukwenza oku, qhagamshela i-relay nge-NO cala le-relay kwaye usete ukuguqula kwi-OFF isikhundla. Ukuba umbane ulahlekile kumlawuli, i-relay iya kukhupha amandla kwaye igcine isiphaluka sivulekile ukukhusela impompo ekusebenzeni.

UKUZALISWA NGOKUZENZAKALELAYO:
Le nkqubo iqulethe itanki ene-sensor yezinga eliphezulu, i-sensor yezinga eliphantsi, kunye ne-valve elawulwa ngumlawuli. Inxalenye yoyilo olufanelekileyo olungaphumeleliyo kule nkqubo kukuba ukuba amandla alahlekile kumlawuli nangasiphi na isizathu, ivalve egcwalisa itanki kufuneka ivalwe. Ngoko ke, sidibanisa i-valve kwi-NO side ye-relay. Xa i-relay inikwe amandla, i-valve iya kuvula kwaye igcwalise itanki. Kule meko, ukuguqula kufuneka KUVULIWE. Isalathisi se-relay siya kuhambelana ngqo nesimo esivulekileyo / esivaliweyo se-valve.
Ukumisela useto lwe-LATCH kunye ne-INVERT: Le yindlela ekufuneka isebenze ngayo inkqubo:

• Xa zombini i-sensor ephezulu kunye nephantsi yomile, i-valve iya kuvula (i-relay energized), iqala ukuzalisa itanki.
• Xa inzwa ephantsi iba manzi, ivalve iya kuhlala ivulekile (i-relay energized).
• Xa i-sensor ephezulu imanzi, ivalve iya kuvala (i-relay de-energized.
• Xa i-sensor ephezulu iba yomile, i-valve iya kuhlala ivaliwe (i-relay de-energized).

Ingqayi: Kuyo nayiphi na inkqubo yokulawula i-sensor ezimbini, i-LATCH kufuneka ivuliwe.
Ngenisa: Ngokubhekiselele kwitshathi yengqiqo kwiNyathelo yeSibhozo, sijonge ukusetwa okuza kuphelisa amandla i-relay (ukuqala impompo) xa zombini iingeniso zimanzi (ii-Amber LEDs). Kule nkqubo, Ukuguqula kufuneka IVULIWE.
Ukumisela uqhagamshelo lwegalelo lika-A okanye u-B: Xa i-LATCH IVULIWE, akukho mahluko usebenzayo phakathi kweNgeniso A kunye ne-B, kuba zombini abenzi boluvo kufuneka babe nomqondiso ofanayo ukuze isimo sitshintshe. Xa ufaka iingcingo kulo naliphi na icandelo le-relay ye-input-input, ukuqwalaselwa kuphela kwe-hook i-sensor ethile kwi-A okanye ku-B kukuba i-LATCH iya OFF.

OKUZENZAKALELAYO OKUNAMTHETHO:
Ingqiqo yenkqubo efanayo ingasetyenziselwa umsebenzi ongenanto ozenzekelayo. Kule example, siya kusebenzisa impompo ukukhupha itanki. Inkqubo isenayo itanki ene-sensor yezinga eliphezulu, i-sensor yezinga eliphantsi, kunye nepompo elawulwa ngumlawuli.

• Phawula: Uyilo olungaphumeleliyo lubalulekile kwi
  isicelo apho itanki igcwaliswa ngokungenzi nto. Ukungaphumeleli kwamandla kumlawuli okanye iisekethe zempompo kunokubangela ukuba itanki iphuphume. I-alamu ephezulu engafunekiyo ibalulekile ukuthintela ukuphuphuma.
• Qhagamshela impompo kwi-NO cala le-relay. Kulo mzekelo, uGuqulela kufuneka IVALIWE, xa i-relay inikwe amandla, impompo iya kuqhuba kwaye ikhuphe itanki. Isalathiso se-relay siya kuhambelana ngqo nesimo sokuvula / sokuvala umpompo.
• Phawula: Ukuba umthwalo wempompo wepompo udlula umlinganiselo we-relay yomlawuli, i-stepper relay yomthamo ophezulu kufuneka isetyenziswe njengenxalenye yoyilo lwenkqubo.

UKUFUMANA OKUVUZAYO:
Iswitshi yokubona ukuvuza ifakelwe nokuba ngaphakathi kwesithuba esiphakathi kwetanki okanye ngodonga olungaphandle. Ukutshintsha kuya kuhlala kumanzi i-99.99% yexesha. Kuphela xa ulwelo ludibana nokutshintsha apho i-relay iya kuvala ukuvula i-alam. I-alamu ixhunywe kwicala le-NC ye-relay ukuvumela i-alamu yokuhluleka kwamandla.

Phawula: Inzwa yome. Kule meko, sifuna ukuba i-relay inikwe amandla ukuze i-alamu ingavakali: oko kukuthi, i-Red relay LED kufuneka ivulwe nanini na i-Input LED i-Amber. Ngoko sivula i-Inverted On. Ukuba ulwelo ludibana nokutshintsha, iswitshi iyasebenza, i-relay ikhupha amandla, kwaye i-alam iyakhala.

Isihlomelo

I-RELAY LOGIC – UKUZALISWA NGOKUZENZAKALELAYO NOKUKHANGELA IMPILO
I-latching relay iya kutshintsha kuphela xa zombini izitshixo zenqanaba zikwimeko efanayo.

Phawula: Ubume besicelo (nokuba kukugcwalisa okanye ukukhupha) akunakuze kuqinisekiswe xa iswitshi enye iManzi kwaye enye iDry. Kuphela xa zombini iitshintshi zikwimeko efanayo (zombini zimanzi okanye zombini Zomile) zinokuqinisekiswa ubume be-relay (ene-energized or de-energized) yenzeke.

I-RELAY LOGIC-I-RELAY EZIMELEYO
I-Relay iya kusebenza ngokuthe ngqo kwimo yokutshintsha kwenqanaba. Xa ukutshintshwa kwinqanaba limanzi, igalelo le-LED liya kuba ON (Amber). Xa inqanaba lokutshintsha lilomile, igalelo le-LED liya kuValwa.

Phawula: Soloko ujonga ubume bokutshintsha kwenqanaba kwaye uthelekise eso simo ngokuchasene neInput LED. Ukuba umgangatho wokutshintsha (Okumanzi okanye owomileyo) uhambelana ne-Input LED, qhubela phambili kwi-relay. Ukuba umgangatho wokutshintsha (Okumanzi okanye owomileyo) awuhambelani negalelo le-LED, ke jonga ukusebenza komgangatho wokutshintsha.

I-LATCH – VS OFF:
I-relay ingaba yi-relay ezimeleyo (izinga eliphezulu, izinga eliphantsi okanye ukukhuselwa kwempompo) kunye ne-Latch OFF okanye ingaba yi-latching relay (ukuzalisa ngokuzenzekelayo okanye engenanto) ngeLatch ON.

• Nge-Latch OFF, ukhutshelo luya kuphendula kuphela kwi-INPUT A. IINPUT B ayisayi kuhoywa ngelixa iLatch IVALIWE.
  

  Ngenisa OFF		Latch OFF
  Igalelo A*	Igalelo B*	Udluliselo
  ON	Akukho siphumo	ON
  CIMA	Akukho siphumo	CIMA

  Ngenisa ON		Latch OFF
  Igalelo A*	Igalelo B*	Udluliselo
  ON	Akukho siphumo	CIMA
  CIMA	Akukho siphumo	ON

• NgeLatch ON, ireyiyi iya kusebenza xa IINPUT A kunye ne-INPUT B zikwimeko enye. I-relay ayiyi kutshintsha imeko yayo de omabini amagalelo abuyisele umva imeko yawo.
  

  Ngenisa OFF		Latch ON
  Igalelo A*	Igalelo B*	Udluliselo
  ON	ON	ON
  CIMA	ON	Akukho tshintsho
  ON	CIMA	Hayi Guqula
  CIMA	CIMA	ON

  Ngenisa ON		Latch ON
  Igalelo A*	Igalelo B*	Udluliselo
  ON	ON	CIMA
  CIMA	ON	Akukho tshintsho
  ON	CIMA	Hayi Guqula
  CIMA	CIMA	ON

Phawula: Abanye abenzi boluvo (ingakumbi abenzi boluvo be-buoyancy) banokuba namandla abo okuguqula (i-NO okanye i-NC enentambo). Oku kuya kutshintsha ingqiqo yokutshintsha kokuguqula. Jonga uyilo lwenkqubo yakho.

INGQONDO YOMLAWULI:
Nceda usebenzise esi sikhokelo silandelayo ukuqonda ukusebenza kwabalawuli.

1. Amandla e-LED: Qinisekisa ukuba i-Green power LED IYAQHUBEKA xa umbane unikwa isilawuli.
2. I(ii) LED: Igalelo le-LED (s) kwisilawuli liya kuba yi-Amber xa i-switch (es) imanzi kwaye i-Green okanye i-OFF xa i-switch(es) i-/ yomile. Ukuba ii-LED azitshintshi igalelo le-LED, vavanya inqanaba lokutshintsha.
3. Ugqithiso lweNgeniso enye: Xa igalelo le-LED licima kwaye LIVULA, i-relay LED nayo iya kutshintsha. Nge-invert OFF, i-LED ye-relay iya kuba: XA xa igalelo le-LED LUVILE kwaye LUVAMILE xa igalelo le-LED LUVAMILE. Nge-invert ON, i-LED ye-relay iya kuba: IVALIWE xa igalelo le-LED LIVULIWE kwaye IYAQHUBEKA xa igalelo le-LED LUVAMILE.
4. UFakelo oluBini-mbili (ukuxhoma) iiRelay: Xa amagalelo omabini emanzi (i-Amber LED's ON), i-relay iya kuba namandla (i-Red LED ON). Emva koko, ukuba iswitshi enye iba yomile, i-relay iya kuhlala inamandla. Kuphela xa zombini izitshixo zomile (zombini i-amber LED's OFF) apho umlawuli uya kuthi acime amandla kwireyidi. I-relay ayiyi kunika amandla kwakhona de zombini iiswitshi zimanzi. Jonga iTshati yeRelay Latch Logic engezantsi ukuze ufumane ingcaciso engaphezulu.

UKUBABAZIWA KWEXESHA:
Ukulibaziseka kwexesha kunokulungiswa ukusuka kwimizuzwana eyi-0.15 ukuya kwimizuzwana engama-60. Ulibaziseko lusebenza kuzo zombini icala le-Make and Break of relay. Ulibaziseko lungasetyenziselwa ukunqanda incoko yerelay, ngakumbi xa unenqanaba lolwelo olunesiphithiphithi. Ngokuqhelekileyo, ukujikeleza okuncinci ngasekunene, ukusuka kwindawo yayo yonke indlela echasene newotshi, kwanele ukunqanda incoko yokudlulisa.
Phawula: Ukulibaziseka kunezithintelo kwisiphelo ngasinye sokujikeleza kwayo kwe-270 °.

UKULUNGISA INGXAKI

INGXAKI	ISISOMBULULO
Ukutshintsha kodluliso kuphela kwigalelo A (alihoyi igalelo B)	Ilatshi icinyiwe. Flip iswitshi yelatshi ukuze uvule.
Inqanaba lifikelela kwi-alam, kodwa i-relay IVIMILE.	Okokuqala, jonga ukuqinisekisa ukuba igalelo le-LED livuliwe. Ukuba akunjalo, khangela iingcingo zoluvo. Okwesibini, khangela ubume be-Relay LED. Ukuba ayichanekanga, flip iswitshi yokuguqula ukutshintsha imo yerelay.
Impompo okanye iValve kufanele ukuba iyeke, kodwa ayenzeki.	Okokuqala, jonga ukuqinisekisa ukuba igalelo le-LEDs zombini zikwimeko efanayo (zombini ZIVAMILE okanye zombini ZIVAMILE). Ukuba akunjalo, khangela iingcingo kuluvo ngalunye. Okwesibini, khangela ubume be-Relay LED. Ukuba ayichanekanga, flip iswitshi yokuguqula ukutshintsha imo yerelay.
Umlawuli unikwe amandla, kodwa akukho nto yenzekayo.	Okokuqala jonga i-Power LED ukuze uqiniseke ukuba iGreen. Ukuba akunjalo, khangela i-wiring, amandla kwaye uqinisekise ukuba i-terminal ihleli ngokuchanekileyo.

UKUVAVANYA UREYALI:

1.888.610.7664
www.calcert.com
sales@calcert.com

Amaxwebhu / Izibonelelo

FLOWLINE LC92 Series Remote Level Isolation Controller [pdf] Incwadi Yomyalelo LC90, LC92 Series Remote Level Isolation Controller, LC92 Series, Remote Level Isolation Controller, Level Isolation Controller, Isolation Controller, Controller

Iimbekiselo

• Incwadi yokusebenzisa