Lisebelisoa tse bohlale ho analog lisebelisoa
Litaelo le litemoso bakeng sa ho kenya le ho sebelisa
LITEMOSO LE TLHOKOMELISO KAKARETSO
- TLHOKOMELO! – Bukana ena e na le litaelo tsa bohlokoa le litemoso bakeng sa polokeho ea motho. Bala ka hloko likarolo tsohle tsa bukana ena. Haeba u na le pelaelo, emisa ho kenya hang-hang 'me u ikopanye le Nice Technical Assistance.
- TLHOKOMELO! – Litaelo tsa bohlokoa: boloka bukana ena sebakeng se bolokehileng ho thusa ho hlokomela le ho lahla sehlahisoa nakong e tlang.
- TLHOKOMELO! - Ts'ebetso eohle ea ho kenya le ho hokahanya e tlameha ho etsoa ka mokhoa o ikhethileng ke basebetsi ba tšoanelehang le ba nang le boiphihlelo ba nang le yuniti e khaotsoeng phepelong ea motlakase e kholo.
- TLHOKOMELO! - Tšebeliso efe kapa efe ntle le e boletsoeng mona kapa maemong a tikoloho ntle le e boletsoeng bukeng ena e tla nkuoa e sa nepahala ebile e hanetsoe ka tieo!
- Lisebelisoa tsa liphutheloana tsa sehlahisoa li tlameha ho lahloa ka tatellano e phethahetseng le melaoana ea lehae.
- Le ka mohla u se ke ua sebelisa liphetoho karolong efe kapa efe ea sesebelisoa. Ts'ebetso ntle le tse boletsoeng li ka baka mathata. Moetsi o hana mekoloto eohle ea tšenyo e bakiloeng ke liphetoho tsa nakoana ho sehlahisoa.
- Le ka mohla u se ke ua beha sesebelisoa haufi le mehloli ea mocheso 'me le ka mohla u se ke ua pepesehela malakabe a hlobotseng. Liketso tsena li ka senya sehlahisoa le ho baka
ho se sebetse hantle. - Sehlahisoa sena ha sea rereloa ho sebelisoa ke batho (ho kenyeletsoa bana) ba nang le matla a fokotsehileng a ’mele, a kutlo kapa a kelello kapa ba hlokang phihlelo le tsebo, ntle le haeba ba filoe tlhokomelo kapa taelo mabapi le tšebeliso ea sehlahisoa ke motho ea ikarabellang bakeng sa polokeho ea bona.
- Sesebelisoa se tsamaisoa ka molumo o sireletsehileng oa voltage. Leha ho le joalo, mosebelisi o lokela ho ba hlokolosi kapa a laele ho kenya motho ea tšoanelehang.
- Hokela feela ho latela e 'ngoe ea litšoantšo tse hlahisitsoeng bukeng ea tataiso. Khokahano e fosahetseng e ka baka kotsi bophelong, bophelo kapa tšenyo ea thepa.
- Sesebelisoa se etselitsoe ho kenngoa ka lebokoseng la switjha la lebota la botebo eseng ka tlase ho 60mm. Lebokose la switjha le lihokelo tsa motlakase li tlameha ho tsamaellana le litekanyetso tse amehang tsa polokeho ea naha.
- Se ke oa pepesetsa sehlahisoa sena mongobo, metsi kapa maro a mang.
- Sehlahisoa sena se etselitsoe tšebeliso ea ka tlung feela. U se ke ua sebelisa ka ntle!
- Sehlahisoa sena ha se papali. Ipolokele hole le bana le liphoofolo!
TLHALOSO EA SEHLAHISOA
Smart-Control e lumella ho ntlafatsa ts'ebetso ea li-sensor tse nang le marang-rang le lisebelisoa tse ling ka ho eketsa puisano ea marang-rang ea Z-Wave™.
O ka hokahanya li-sensor tsa binary, li-analog sensors, li-sensor tsa mocheso tsa DS18B20 kapa mongobo oa DHT22 le sensor ea mocheso ho tlaleha ho bala ha tsona ho molaoli oa Z-Wave. E ka boela ea laola lisebelisoa ka ho bula / ho koala mabitso a tsoang ntle le lisebelisoa.
Lintlha tse ka sehloohong
- E lumella ho hokahanya li-sensor:
» 6 DS18B20 lisensara,
» 1 DHT sensor,
» 2 2-wire analog sensor,
» 2 3-wire analog sensor,
» 2 li-sensor tsa binary. - Sensor ea mocheso o hahelletsoeng.
- E ts'ehetsa Mekhoa ea Ts'ireletso ea marang-rang ea Z-Wave™: S0 e nang le encryption ea AES-128 le S2 E netefalitsoeng ka encryption e thehiloeng ho PRNG.
- E sebetsa joalo ka sebui se pheta-phetoang sa Z-Wave (lisebelisoa tsohle tse se nang betri ka har'a marang-rang li tla sebetsa joalo ka li pheta-pheta ho eketsa ts'epo ea marang-rang).
- E ka sebelisoa le lisebelisoa tsohle tse netefalitsoeng ka setifikeiti sa Z-Wave Plus ™ mme e lokela ho tsamaellana le lisebelisoa tse joalo tse hlahisoang ke baetsi ba bang.
Smart-Control ke sesebelisoa se lumellanang ka botlalo sa Z-Wave Plus™.
Sesebelisoa sena se ka sebelisoa le lisebelisoa tsohle tse netefalitsoeng ka setifikeiti sa Z-Wave Plus 'me se lokela ho lumellana le lisebelisoa tse joalo tse hlahisoang ke bahlahisi ba bang. Lisebelisoa tsohle tse se nang betri ka har'a marang-rang li tla sebetsa e le li pheta-pheta ho eketsa ho tšepahala ha marang-rang. Sesebelisoa ke sehlahisoa sa Ts'ireletso se Nolofalitsoeng sa Z-Wave Plus 'me Setsi sa Ts'ireletso se Nolofalitsoeng sa Z-Wave se tlameha ho sebelisoa molemong oa ho sebelisa sehlahisoa ka botlalo. Sesebelisoa se tšehetsa Mekhoa ea Ts'ireletso ea marang-rang ea Z-Wave: S0 e nang le encryption ea AES-128 le S2
E netefalitsoe ka encryption e thehiloeng ho PRNG.
KEKETSO
Ho hokela sesebelisoa ka tsela e sa lumellaneng le bukana ena ho ka baka kotsi bophelong, bophelo kapa tšenyo ea thepa.
- Hokela feela ho latela e 'ngoe ea litšoantšo,
- Sesebelisoa se tsamaisoa ka matla a sireletsehileng a voltage; leha ho le joalo, mosebelisi o lokela ho ba hlokolosi haholo kapa a laele ho kenya motho ea tšoanelehang,
- Se ke oa hokela lisebelisoa tse sa tsamaellaneng le litlhaloso,
- Se ke oa hokela li-sensor tse ling ho feta DS18B20 kapa DHT22 ho li-terminals tsa SP le SD,
- Se ke oa hokela li-sensor ho li-terminals tsa SP le SD tse nang le likhoele tse telele ho feta limithara tse 3,
- Se ke oa kenya lisebelisoa tsa sesebelisoa ka motlakase o fetang 150mA,
- Sesebediswa se seng le se seng se hoketsweng se lokela ho tsamaelana le ditekanyetso tse amehang tsa polokeho,
- Mehala e sa sebelisoeng e lokela ho tloheloa e sirelelitsoe.
Litlhahiso tsa ho hlophisa antenna:
- Fumana antenna hole le likarolo tsa tšepe kamoo ho ka khonehang (lithapo tse hokahanyang, mehele ea bracket, joalo-joalo) ho thibela litšitiso,
- Libaka tsa tšepe tse haufi le lenakana (mohlala, mabokose a tšepe a phahamisitsoeng, liforeimi tsa mamati a tšepe) li ka senya kamohelo ea matšoao!
- U se ke ua khaola kapa ua khutsufatsa antenna - bolelele ba eona bo lumellana ka ho phethahetseng le sehlopha seo tsamaiso e sebetsang ho sona.
- Etsa bonnete ba hore ha ho karolo ea antenna e khomarelang leboteng la switch switch.
3.1 – Lintlha tsa litšoantšo
ANT (e ntšo) - antenna
GND (blue) - mokhanni oa fatše
SD (e tšoeu) - sekontiri sa pontšo bakeng sa DS18B20 kapa DHT22 sensor
SP (sootho) - motlakase oa motlakase bakeng sa DS18B20 kapa DHT22 sensor (3.3V)
IN2 (botala) - ho kenya nomoro. 2
IN1 (mosehla) - ho kenya nomoro. 1
GND (blue) - mokhanni oa fatše
P (e khubelu) - motlakase oa motlakase
OUT1 - tlhahiso ea no. 1 e abetsoe ho kenya IN1
OUT2 - tlhahiso ea no. 2 e abetsoe ho kenya IN2
B - konopo ea tšebeletso (e sebelisetsoang ho eketsa / ho tlosa sesebelisoa)
3.2 - Ho hokahana le mohala oa alamo
- Tima tsamaiso ea alamo.
- Ikopanye le e 'ngoe ea litšoantšo tse ka tlase:
- Netefatsa ho nepahala ha khokahano.
- Lokisetsa sesebelisoa le antenna ea sona ka tlung.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
- Fetola boleng ba liparamente:
• E hokahane le IN1:
»Ka tloaelo koala: fetola parameter 20 ho 0
» Ka tloaelo e buloa: fetola parameter 20 ho isa ho 1
• E hokahane le IN2:
»Ka tloaelo koala: fetola parameter 21 ho 0
» Ka tloaelo e buloa: fetola parameter 21 ho isa ho 1
3.3 - Khokahano le DS18B20
Sensor ea DS18B20 e ka kenngoa habonolo kae kapa kae moo ho hlokahalang litekanyo tse nepahetseng haholo tsa mocheso. Haeba mehato e nepahetseng ea tšireletso e etsoa, sensor e ka sebelisoa libakeng tse mongobo kapa tlas'a metsi, e ka kenngoa ka konkreite kapa ea behoa tlas'a fatše. O ka hokela lisensara tse fihlang ho tse 6 tsa DS18B20 ka ho bapa le li-terminals tsa SP-SD.
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
3.4 - Khokahano le DHT22
Sensor ea DHT22 e ka kenngoa habonolo kae kapa kae moo ho hlokahalang litekanyo tsa mongobo le mocheso.
O ka hokela sensor ea 1 DHT22 feela ho li-terminals tsa TP-TD.
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
3.5 - Khokahano e nang le sensor ea 2-terata 0-10V
Sensor ea analog ea terata e 2 e hloka mohanyetsi oa ho hula.
O ka hokela lisensara tse 2 tsa analoge ho li-terminal tsa IN1/IN2.
Phepelo ea 12V ea hlokahala bakeng sa mefuta ena ea li-sensor.
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
- Fetola boleng ba liparamente:
• Hokahane le IN1: fetola paramethara 20 ho isa ho 5
• Hokahane le IN2: fetola paramethara 21 ho isa ho 5
3.6 - Khokahano e nang le sensor ea 3-terata 0-10V
O ka hokela liteishene tse 2 tsa analoge tsa IN1/IN2.
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
- Fetola boleng ba liparamente:
• Hokahane le IN1: fetola paramethara 20 ho isa ho 4
• Hokahane le IN2: fetola paramethara 21 ho isa ho 4
3.7 - Khokahano le sensor ea binary
U hokela li-sensor tse buloang hangata kapa ka tloaelo ho li-terminals tsa IN1/IN2.
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
- Fetola boleng ba liparamente:
• E hokahane le IN1:
»Ka tloaelo koala: fetola parameter 20 ho 0
» Ka tloaelo e buloa: fetola parameter 20 ho isa ho 1
• E hokahane le IN2:
»Ka tloaelo koala: fetola parameter 21 ho 0
» Ka tloaelo e buloa: fetola parameter 21 ho isa ho 1
3.8 - Ho hokela le konopo
O ka hokela li-switch tse tšoarellang kapa tse bistable ho li-terminals tsa IN1/IN2 ho kenya liketsahalo.
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
- Fetola boleng ba liparamente:
- E hokahane le IN1:
»Monostable: fetola parameter 20 ho isa ho 2
»Bistable: fetola paramente 20 ho isa ho 3 - E hokahane le IN2:
»Monostable: fetola parameter 21 ho isa ho 2
»Bistable: fetola paramente 21 ho isa ho 3
3.9 - Ho hokahana le opener ea heke
Smart-Control e ka hokahana le lisebelisoa tse fapaneng ho li laola. Ho sena mohlalaampe hokahane le opener ea heke ka ho kenya letsoho (tšusumetso e 'ngoe le e' ngoe e tla qala ebe e emisa enjene ea heke, ho bula / ho koala ka tsela e fapaneng)
- Hakolla motlakase.
- Hokela ho ea ka setšoantšo se ka ho le letona.
- Netefatsa ho nepahala ha khokahano.
- Matla sesebelisoa.
- Kenya sesebelisoa ho marang-rang a Z-Wave.
- Fetola boleng ba liparamente:
- E hokahane le IN1 le OUT1:
» Fetola paramethara ea 20 ho isa ho 2 (konopo e le 'ngoe)
» Fetola paramethara 156 ho isa ho 1 (0.1s) - E hokahane le IN2 le OUT2:
» Fetola paramethara ea 21 ho isa ho 2 (konopo e le 'ngoe)
» Fetola paramethara 157 ho isa ho 1 (0.1s)
EKETSANG MOSEBETSI
- Khoutu e felletseng ea DSK e fumaneha feela ka lebokoseng, etsa bonnete ba hore oa e boloka kapa ua kopitsa khoutu.
- Haeba ho na le mathata ka ho eketsa sesebelisoa, ka kopo, seta sesebelisoa hape 'me u phete mokhoa oa ho eketsa.
Ho eketsa (Kenyelletso) - Mokhoa oa ho ithuta oa sesebelisoa sa Z-Wave, o lumellang ho eketsa sesebelisoa ho marang-rang a teng a Z-Wave.
4.1 - Ho eketsa ka letsoho
Ho eketsa sesebelisoa ho netweke ea Z-Wave ka letsoho:
- Matla sesebelisoa.
- Seta molaoli ea ka sehloohong ho (Security / non-Security Mode) eketsa mokhoa (bona bukana ea molaoli).
- Ka potlako, tobetsa habeli konopo ntlong ea sesebelisoa kapa switjha e hoketsoeng ho IN1 kapa IN2.
- Haeba o eketsa ho Security S2 E netefalitsoeng, hlahloba khoutu ea DSK QR kapa kenya PIN khoutu ea linomoro tse 5 (leibole e botlaaseng ba lebokose).
- LED e tla qala ho benya bosehla, emela hore ts'ebetso e eketsoang e fele.
- Keketso e atlehileng e tla netefatsoa ke molaetsa oa molaoli oa Z-Wave.
4.2 - Ho eketsa ka ho sebelisa SmartStart
Lihlahisoa tse lumelletsoeng tsa SmartStart li ka kenyelletsoa marang-rang a Z-Wave ka ho lekola Khoutu ea Z-Wave QR e teng sehlahisoa le molaoli ea fanang ka kenyelletso ea SmartStart. Sehlahisoa sa SmartStart se tla eketsoa ka boiketsetso nakong ea metsotso e 10 ho buloa lenaneng la marang-rang.
Ho eketsa sesebelisoa ho netweke ea Z-Wave u sebelisa SmartStart:
- Beha molaoli ea ka sehloohong ho Security S2 Authenticated add mode (sheba bukana ea molaoli).
- Hlakola khoutu ea QR ea DSK kapa kenya PIN khoutu ea linomoro tse 5 (leibole botlaaseng ba lebokose).
- Matla sesebelisoa.
- LED e tla qala ho benya bosehla, emela hore ts'ebetso e eketsoang e fele.
- Keketso e atlehileng e tla netefatsoa ke molaetsa oa molaoli oa Z-Wave
TS'ELISO SETS'OANE
Ho tlosa (kantle ho) - Mokhoa oa ho ithuta oa sesebelisoa sa Z-Wave, o lumellang ho tlosa sesebelisoa ho netweke e teng ea Z-Wave.
Ho tlosa sesebelisoa marangrang a Z-Wave:
- Matla sesebelisoa.
- Seta molaoli ea ka sehloohong hore a tlose mokhoa (sheba buka ea molaoli).
- Ka potlako, tobetsa habeli konopo ntlong ea sesebelisoa kapa switjha e hoketsoeng ho IN1 kapa IN2.
- LED e tla qala ho benya bosehla, emela hore ts'ebetso ea ho tlosa e fele.
- Ho tlosa ka katleho ho tla netefatsoa ke molaetsa oa molaoli oa Z-Wave.
Lintlha:
- Ho tlosa sesebelisoa ho khutlisa li-parameter tsohle tsa kamehla tsa sesebelisoa, empa ha ho retele data ea metering ea matla.
- Ho tlosa o sebelisa switjha e hoketsoeng ho IN1 kapa IN2 e sebetsa hafeela paramethara 20 (IN1) kapa 21 (IN2) e behiloe ho 2 kapa 3 mme paramethara 40 (IN1) kapa 41 (IN2) ha e lumelle ho romella litšoantšo ka makhetlo a mararo.
TS'EBELETSO SETS'OANE
6.1 - Ho laola liphetho
Hoa khoneha ho laola liphetho ka lintho tse kenang kapa ka konopo ea B:
- tobetsa hanngoe - switjha tlhahiso ea OUT1
- tobetsa habeli - switjha tlhahiso ea OUT2
6.2 - Lipontšo tse bonoang
Leseli le kentsoeng ka har'a LED le bonts'a boemo ba hajoale ba sesebelisoa
Kamora ho matlafatsa sesebelisoa:
- Botala - sesebelisoa se kenyellelitsoeng marang-rang a Z-Wave (ntle le Security S2 e netefalitsoeng)
- Magenta - sesebelisoa se kenyellelitsoeng marang-rang a Z-Wave (ka Ts'ireletso ea S2 e netefalitsoeng)
- Khubelu - sesebelisoa se sa eketsoang marang-rang a Z-Wave
Nchafatso:
- cyan e benyang - ntlafatso e ntse e tsoela pele
- Green - ntjhafatso e atlehile (e kenyellelitsoe ntle le Ts'ireletso ea S2 e netefalitsoeng)
- Magenta - ntjhafatso e atlehile (e kenyellelitsoe ka Security S2 E netefalitsoeng)
- Khubelu - ntlafatso ha ea atleha
Lenane:
- Ho panya ha 3 - ho kenya menu (e kenyellelitsoe ntle le Ts'ireletso ea S2 e netefalitsoeng)
- 3 magenta a panya - ho kenya menu (e kenyellelitsoeng ka Security S2 E netefalitsoeng)
- Lipanya tse 3 tse khubelu - ho kenya menu (e sa eketsoa ho netweke ea Z-Wave)
- Magenta - tlhahlobo ea mefuta
- Yellow - seta bocha
6.3 - Menyu
Menu e u lumella ho etsa liketso tsa marang-rang tsa Z-Wave. Ho sebelisa menu:
- Tobetsa o hatelle konopo ho kenya menu, sesebelisoa se panya ho bontša boemo ba ho eketsa (sheba 7.2 – Lipontšo tse bonoang).
- Hlakola konopo ha sesebelisoa se bontša sebaka seo u se batlang ka 'mala:
• MAGENTA – qala tlhahlobo ea sebaka
• TŠEHLA – seta sesebediswa botjha - Tobetsa konopo kapele ho netefatsa.
6.4 – Ho seta botjha ho ditafole tsa feme
Tsamaiso ea Reset e lumella ho khutlisetsa sesebelisoa maemong a eona a feme, ho bolelang hore tlhaiso-leseling e mabapi le molaoli oa Z-Wave le phetolo ea mosebelisi e tla hlakoloa.
Hlokomela. Ho tsosolosa sesebelisoa hase mokhoa o khothalletsoang oa ho tlosa sesebelisoa ho tloha marang-rang a Z-Wave. Sebelisa mokhoa oa ho reset hafeela selaoli sa rimary se le sieo kapa se sa sebetse. Ho tlosoa ha sesebelisoa ho itseng ho ka finyelloa ka mokhoa oa ho tlosa o hlalositsoeng.
- Tobetsa o hatelle konopo ho kenya menu.
- Konopo ea ho lokolla ha sesebelisoa se khanya ka mosehla.
- Tobetsa konopo kapele ho netefatsa.
- Ka mor'a metsotsoana e seng mekae sesebelisoa se tla tsosolosoa, se ngotsoeng ka 'mala o mofubelu.
Z-MAQHUBU RANGE TEKO
Sesebelisoa se na le tlhahlobo e ka sehloohong ea taolo ea marang-rang ea Z-Wave.
- Ho etsa hore tlhahlobo ea mefuta ea Z-Wave e khonehe, sesebelisoa se tlameha ho eketsoa ho molaoli oa Z-Wave. Tlhahlobo e ka 'na ea hatisa marang-rang, kahoo ho kgothaletswa ho etsa tlhahlobo feela maemong a khethehileng.
Ho leka mefuta e mengata ea molaoli:
- Tobetsa o hatelle konopo ho kenya menu.
- Konopo ea ho lokolla ha sesebelisoa se khanya magenta.
- Tobetsa konopo kapele ho netefatsa.
- Ponahalo e bonts'ang e tla bonts'a mefuta ea marang-rang ea Z-Wave (mefuta e fapaneng ea lipontšo e hlalositsoeng ka tlase).
- Ho tsoa tekong ea mefuta ea Z-Wave, tobetsa konopo hakhutšoanyane.
Mefuta ea tlhahlobo ea mefuta ea Z-Wave:
- Pontšo ea pono e phunyang botala - sesebelisoa se leka ho theha puisano e tobileng le molaoli ea ka sehloohong. Haeba teko ea puisano e tobileng e hlōleha, sesebelisoa se tla leka ho theha puisano e tsamaisoang, ka li-module tse ling, tse tla bontšoa ke pontšo ea pono e phunyeletsang mosehla.
- Pontšo e bonahalang e khanyang botala - sesebelisoa se buisana le molaoli ea ka sehloohong ka ho toba.
- Ponahalo e bonts'ang pulsing yellow - sesebelisoa se leka ho theha puisano e tsamaisoang le molaoli ea ka sehloohong ka li-module tse ling (li-repeaters).
- Pontšo e bonahalang e khanyang mosehla - sesebelisoa se buisana le molaoli ea ka sehloohong ka li-module tse ling. Ka mor'a metsotsoana ea 2 sesebelisoa se tla leka hape ho theha puisano e tobileng le molaoli ea ka sehloohong, e tla bontšoa ka pontšo ea pono e phunyang botala.
- Visual indicator pulsing violet - sesebelisoa se buisana sebakeng se seholo sa marang-rang a Z-Wave. Haeba khokahano e atleha e tla netefatsoa ka khanya e mosehla. Ha ho kgothaletswe ho sebedisa sesebediswa ka tekanyo e fetelletseng.
- Pontšo e bonahalang e khanyang bofubelu - sesebelisoa ha se khone ho hokahanya le molaoli ea ka sehloohong ka ho toba kapa ka sesebelisoa se seng sa marang-rang sa Z-Wave (mopea-pheta).
Hlokomela. Mokhoa oa puisano oa sesebelisoa o ka 'na oa fetoha pakeng tsa ho toba le o mong o sebelisa litsela, haholo-holo haeba sesebelisoa se le moeling oa sebaka se tobileng.
TS'ELISO TS'OANELO
Sesebelisoa se ka kenya tšebetsong lits'oants'o ho molaoli oa Z-Wave ka ho romella ID ea ketsahalo le tšobotsi ea ketso e itseng e sebelisa Central Scene Command Class.
E le hore ts'ebetso ena e sebetse, hokela sesebelisoa sa monostable kapa bistable ho IN1 kapa IN2, ebe u beha parameter 20 (IN1) kapa 21 (IN2) ho isa ho 2 kapa 3.
Ka mokhoa oa kamehla ha o sebetse, beha liparamente 40 le 41 ho nolofalletsa ketsahalo bakeng sa liketso tse khethiloeng.
| Letlapa la A1 - Liketsahalo tse kenyang tšebetsong liketsahalo | |||
| Fetoha | Ketso | Sebaka sa ID | Tšobotsi |
|
Fetolela ho terminal ea IN1 |
Switjha e tobetse hang | 1 | Konopo e tobetse 1 nako |
| Switch e tobetse habeli | 1 | Konopo e tobetse makhetlo a 2 | |
| Switjha e tobetse hararo* | 1 | Konopo e tobetse makhetlo a 3 | |
| Switjha e tshwerwe** | 1 | Senotlolo se Tšoaretsoeng Tlase | |
| Phetoho e lokollotsoe** | 1 | Senotlolo se Lokollotsoe | |
|
Fetolela ho terminal ea IN2 |
Switjha e tobetse hang | 2 | Konopo e tobetse 1 nako |
| Switch e tobetse habeli | 2 | Konopo e tobetse makhetlo a 2 | |
| Switjha e tobetse hararo* | 2 | Konopo e tobetse makhetlo a 3 | |
| Switjha e tshwerwe** | 2 | Senotlolo se Tšoaretsoeng Tlase | |
| Phetoho e lokollotsoe** | 2 | Senotlolo se Lokollotsoe | |
* Ho kenya tshebetsong ho penya hararo ho ke ke ha dumella ho tlosa o sebedisa terminal ya ho kenya.
** Ha e fumanehe bakeng sa ho fetola li-switches.
MAHLOMOLA
Mokhatlo (lisebelisoa tse hokahanyang) - taolo e tobileng ea lisebelisoa tse ling ka har'a marang-rang a tsamaiso ea Z-Wave mohlala Dimmer, Relay Switch, Roller Shutter kapa scene (e ka laoloa feela ka molaoli oa Z-Wave). Mokhatlo o tiisa hore ho fetisoa ka ho toba ha litaelo tsa taolo pakeng tsa lisebelisoa, ho etsoa ntle le ho kenya letsoho ha molaoli ea ka sehloohong 'me ho hloka hore sesebelisoa se amanang le sona se be sebakeng se tobileng.
Sesebelisoa se fana ka mokhatlo oa lihlopha tse 3:
Sehlopha sa 1 sa mokhatlo - "Lifeline" e tlaleha boemo ba sesebelisoa mme e lumella ho fana ka sesebelisoa se le seng feela (taolo ea mantlha ka boiketsetso).
Sehlopha sa bobeli sa mokhatlo - "On/Off (IN2)" e abetsoe ho terminal ea ho kenya IN1 (e sebelisa sehlopha sa litaelo tsa motheo).
Sehlopha sa 3 sa mokhatlo - "On/Off (IN2)" e abetsoe ho terminal ea ho kenya IN2 (e sebelisa sehlopha sa litaelo tsa mantlha).
Sesebelisoa sa sehlopha sa 2nd le 3rd se lumella ho laola lisebelisoa tsa 5 tse tloaelehileng kapa tse ngata ka sehlopha sa mokhatlo, ntle le "LifeLine" e boloketsoeng feela molaoli 'me kahoo node ea 1 feela e ka abeloa.
LIEKETSO Z-WAVE
| Letlapa la A2 - Lihlopha tsa Taelo tse Tšehetsoeng | ||||
| Sehlopha sa Taelo | Phetolelo | Sireletsehile | ||
| 1. | COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] | V2 | ||
| 2. | COMMAND_CLASS_SWITCH_BINARY [0x25] | V1 | EE | |
| 3. | COMMAND_CLASS_ASSOCIATION [0x85] | V2 | EE | |
| 4. | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | V3 | EE | |
|
5. |
COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] |
V2 |
EE |
|
| 6. | COMMAND_CLASS_TRANSPORT_SERVICE [0x55] | V2 | ||
| 7. | COMMAND_CLASS_VERSION [0x86] | V2 | EE | |
|
8. |
COMMAND_CLASS_MANUFACTURER_SPECIFIC [0x72] |
V2 |
EE |
|
| 9. | COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A] |
V1 |
EE |
|
| 10. | COMMAND_CLASS_POWERLEVEL [0x73] | V1 | EE | |
| 11. | COMMAND_CLASS_SECURITY [0x98] | V1 | ||
| 12. | COMMAND_CLASS_SECURITY_2 [0x9F] | V1 | ||
| 13. | COMMAND_CLASS_CENTRAL_SCENE [0x5B] | V3 | EE | |
| 14. | COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | V11 | EE | |
| 15. | COMMAND_CLASS_MULTI_CHANNEL [0x60] | V4 | EE | |
| 16. | COMMAND_CLASS_CONFIGURATION [0x70] | V1 | EE | |
| 17. | COMMAND_CLASS_CRC_16_ENCAP [0x56] | V1 | ||
| 18. | COMMAND_CLASS_NOTIFICATION [0x71] | V8 | EE | |
| 19. | COMMAND_CLASS_PROTECTION [0x75] | V2 | EE | |
| 20. | COMMAND_CLASS_FIRMWARE_UPDATE_MD [0x7A] |
V4 |
EE |
|
| 21. | COMMAND_CLASS_SUPERVISION [0x6C] | V1 | ||
| 22. | COMMAND_CLASS_APPLICATION_STATUS [0x22] | V1 | ||
| 23. | COMMAND_CLASS_BASIC [0x20] | V1 | EE | |
| Letlapa la A3 - Sehlopha sa Taelo ea Multichannel | |
| MOLILOENG CC | |
| ROOT (Qetellong ea 1) | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_NOTIFICATION |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_NOTIFICATION_SENSOR |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_NOTIFICATION [0x71] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Kenyelletso 1 – Tsebiso |
| Qetellong 2 | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_NOTIFICATION |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_NOTIFICATION_SENSOR |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_NOTIFICATION [0x71] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Kenyelletso 2 – Tsebiso |
| Qetellong 3 | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_MULTILEVEL |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Kenyelletso ea Analog 1 - MoqtagLevel |
| Qetellong 4 | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_MULTILEVEL |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Kenyelletso ea Analog 2 - MoqtagLevel |
| Qetellong 5 | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SWITCH_BINARY |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_POWER_SWITCH_BINARY |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_SWITCH_BINARY [0x25] | |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_PROTECTION [0x75] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Sephetho sa 1 |
| Qetellong 6 | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SWITCH_BINARY |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_POWER_SWITCH_BINARY |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_SWITCH_BINARY [0x25] | |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_PROTECTION [0x75] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Sephetho sa 2 |
| Qetellong 7 | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_MULTILEVEL |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_NOTIFICATION [0x71] | |
| COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Mocheso - sensor ea ka hare |
| Endpoint 8-13 (ha li-sensor tsa DS18S20 li hokahane) | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_MULTILEVEL |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_NOTIFICATION [0x71] | |
| COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Mocheso - kutlo ea ka ntle DS18B20 No 1-6 |
| Endpoint 8 (ha sensor ea DHT22 e hokahane) | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_MULTILEVEL |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL |
|
Litlelase tsa Taelo |
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_NOTIFICATION [0x71] | |
| COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Mocheso - sensor ea kantle DHT22 |
| Endpoint 9 (ha sensor ea DHT22 e hokahane) | |
| Sehlopha sa Sesebelisoa sa Generic | GENERIC_TYPE_SENSOR_MULTILEVEL |
| Sehlopha se khethehileng sa lisebelisoa | SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL |
| COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E] | |
| COMMAND_CLASS_ASSOCIATION [0x85] | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E] | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59] | |
| COMMAND_CLASS_NOTIFICATION [0x71] | |
| COMMAND_CLASS_SENSOR_MULTILEVEL [0x31] | |
| COMMAND_CLASS_SUPERVISION [0x6C] | |
| COMMAND_CLASS_APPLICATION_STATUS [0x22] | |
| COMMAND_CLASS_SECURITY [0x98] | |
| COMMAND_CLASS_SECURITY_2 [0x9F] | |
| Tlhaloso | Mongobo - sensor ea kantle ea DHT22 |
Sesebelisoa se sebelisa Notification Command Class ho tlaleha liketsahalo tse fapaneng ho molaoli (sehlopha sa "Lifeline"):
| Letlapa la A4 - Sehlopha sa Taelo ea Tsebiso | ||
| ROOT (Qetellong ea 1) | ||
| Mofuta oa Tsebiso | Ketsahalo | |
| Tshireletso ya Lapeng [0x07] | Sebaka sa Kenyelletso se sa Tsejoeng [0x02] | |
| Qetellong 2 | ||
| Mofuta oa Tsebiso | Ketsahalo | |
| Tshireletso ya Lapeng [0x07] | Sebaka sa Kenyelletso se sa Tsejoeng [0x02] | |
| Qetellong 7 | ||
| Mofuta oa Tsebiso | Ketsahalo | Ketsahalo /State Parameter |
| Sistimi [0x09] | Ho hloleha ha lisebelisoa tsa sistimi e nang le khoutu e hlolehileng ea moetsi [0x03] | Mocheso o Feteletseng oa Sesebelisoa [0x03] |
| Qetello ea 8-13 | ||
| Mofuta oa Tsebiso | Ketsahalo | |
| Sistimi [0x09] | Ho hloleha ha lisebelisoa tsa sistimi [0x01] | |
Sehlopha sa Taelo ea Ts'ireletso se lumella ho thibela taolo ea lehae kapa e hole ea liphetho.
| Letlapa la A5 - Ts'ireletso CC: | |||
| Mofuta | Naha | Tlhaloso | Tlhahiso |
|
Sebakeng |
0 |
Ha e itšireletse - Sesebelisoa ha sea sireletsoa, 'me se ka sebetsoa ka tloaelo ka sehokelo sa mosebelisi. |
Lintho tse kenang tse amanang le liphetho. |
|
Sebakeng |
2 |
Ha ho ts'ebetso e ka khonehang - boemo ba tlhahiso bo ke ke ba fetoloa ka konopo ea B kapa Kenyeletso e tsamaisanang le eona |
Lintho tse kentsoeng li khaotsoe ho tsoa ho liphetho. |
|
RF |
0 |
E sa sireletsoeng - Sesebelisoa se amohela le ho arabela Litaelo tsohle tsa RF. |
Liphetho li ka laoloa ka Z-Wave. |
|
RF |
1 |
Ha ho taolo ea RF - taelo ea mantlha ea sehlopha sa taelo le switch binary e hanngoe, sehlopha se seng le se seng sa taelo se tla sebetsoa |
Liphetho ha li khone ho laoloa ka Z-Wave. |
| Letlapa la A6 - Ho etsa 'mapa oa lihlopha tsa mokhatlo | ||
| Motso | Qetello | Sehlopha sa mokhatlo qetellong- ntlha |
| Sehlopha sa 2 sa Mokhatlo | Qetellong 1 | Sehlopha sa 2 sa Mokhatlo |
| Sehlopha sa 3 sa Mokhatlo | Qetellong 2 | Sehlopha sa 2 sa Mokhatlo |
| Letlapa la A7 – Litaelo tsa motheo tsa ho etsa limmapa | |||||
|
Taelo |
Motso |
Lintlha tsa ho qetela |
|||
|
1-2 |
3-4 |
5-6 |
7-13 |
||
|
Basic Set |
= EP1 |
Kopo e Hanohile |
Kopo e Hanohile |
Fetola Binary Set |
Kopo e Hanohile |
|
Fumana Basic |
= EP1 |
Tsebiso Fumana |
Sensor Multi-level Fumana |
Fetola Binary Fumana |
Sensor Multi-level Fumana |
|
Tlaleho ea Motheo |
= EP1 |
Tsebiso Tlaleho |
Sensor Multi-level Report |
Fetola Binary Report |
Sensor Multi-level Report |
| Letlapa la A8 - Limmapa tse ling tsa Sehlopha sa Taelo | |
| Sehlopha sa Taelo | Motso 'mapa ho |
| Sensor Multilevel | Qetellong 7 |
| Phetoho ea Binary | Qetellong 5 |
| Tshireletso | Qetellong 5 |
TS'OANELO MPHATO
Sesebelisoa se lumella ho fetola ts'ebetso ea sona ho latela litlhoko tsa mosebelisi ho sebelisoa mekhahlelo e ka lokisoang.
Litlhophiso li ka fetoloa ka molaoli oa Z-Wave moo sesebelisoa se eketsoang. Mokhoa oa ho li fetola o ka fapana ho latela molaoli.
Likarolo tse ngata li sebetsa feela bakeng sa mekhoa e itseng ea ho kenya (mekhahlelo ea 20 le ea 21), sheba litafole tse ka tlase:
| Letlapa la A9 - Ho itšetleha ka Parameter - Paramethara 20 | |||||||
| Paramethara 20 | No. 40 | No. 47 | No. 49 | No. 150 | No. 152 | No. 63 | No. 64 |
| 0 kapa 1 | ✓ | ✓ | ✓ | ✓ | |||
| 2 kapa 3 | ✓ | ✓ | ✓ | ||||
| 4 kapa 5 | ✓ | ✓ | |||||
| Letlapa la A10 - Ho itšetleha ka Parameter - Paramethara 21 | |||||||
| Paramethara 21 | No. 41 | No. 52 | No. 54 | No. 151 | No. 153 | No. 63 | No. 64 |
| 0 kapa 1 | ✓ | ✓ | ✓ | ✓ | |||
| 2 kapa 3 | ✓ | ||||||
| 4 kapa 5 | ✓ | ✓ | |||||
| Tafole ea A11 - Smart-Control - Liparamente tse teng | ||||||||
| Paramethara: | 20. Kenyeletso 1 – mokgwa wa tshebetso | |||||||
| Tlhaloso: | Paramethara ena e u lumella ho khetha mokhoa oa 1st input (IN1). E fetole ho latela sesebelisoa se hoketsoeng. | |||||||
| Litlhophiso tse fumanehang: | 0 - Ho kenya alamo e tloaelehileng e koetsoeng (Tsebiso) 1 - Ka tloaelo ho kenya alamo e bulehileng (Tsebiso) 2 - konopo ea Monostable (Bohareng Scene)
3 - konopo ea Bistable (Bohareng Scene) 4 - Kenyelletso ea Analog ntle le ho hula ka hare (Sensor Multilevel) 5 - Kenyelletso ea Analog ka ho hula ka hare (Sensor Multilevel) |
|||||||
| Litlhophiso tsa kamehla: | 2 (konopo ea monostable) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 21. Kenyeletso 2 – mokgwa wa tshebetso | |||||||
| Tlhaloso: | Paramethara ena e u lumella ho khetha mokhoa oa 2nd input (IN2). E fetole ho latela sesebelisoa se hoketsoeng. | |||||||
| Litlhophiso tse fumanehang: | 0 - Ho kenya alamo e tloaelehileng e koetsoeng (Notification CC) 1 - Ka tloaelo ho kenya alamo e bulehileng (Notification CC) 2 - konopo ea Monostable (Central Scene CC)
3 - konopo ea Bistable (Central Scene CC) 4 - Kenyelletso ea Analog ntle le ho hula ka hare (Sensor Multilevel CC) 5 - Kenyelletso ea Analog ka ho hula ka hare (Sensor Multilevel CC) |
|||||||
| Litlhophiso tsa kamehla: | 2 (konopo ea monostable) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 24. Maikutlo a ho kenya | |||||||
| Tlhaloso: | Paramethara ena e lumella ho khutlisa ts'ebetso ea lintlha tsa IN1 le IN2 ntle le ho fetola mohala. Sebelisa ha ho na le lithapo tse fosahetseng. | |||||||
| Litlhophiso tse fumanehang: | 0 – ya kamehla (IN1 – 1st input, IN2 – 2nd input)
1 - e khutlisitsoe morao (IN1 - 2nd input, IN2 - 1st input) |
|||||||
| Litlhophiso tsa kamehla: | 0 | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 25. Maikutlo a liphetho | |||||||
| Tlhaloso: | Paramethara ena e lumella ho khutlisa ts'ebetso ea OUT1 le OUT2 ntle le ho fetola mohala. Sebelisa tabeng ea wiring e fosahetseng. | |||||||
| Litlhophiso tse fumanehang: | 0 - ea kamehla (OUT1 - 1st tlhahiso, OUT2 - 2nd tlhahiso)
1 - e khutlisitsoe morao (OUT1 - 2nd output, OUT2 - 1st output) |
|||||||
| Litlhophiso tsa kamehla: | 0 | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 40. Kenyelletso 1 - litšoantšo tse rometsoeng | |||||||
| Tlhaloso: | Paramethara ena e hlalosa hore na ke liketso life tse fellang ka ho romela ID ea ketsahalo le tšobotsi eo ba e abetsoeng (sheba 9: Ho kenya tšebetsong
litšoantšo). Paramethara e sebetsa feela haeba parameter 20 e behiloe ho 2 kapa 3. |
|||||||
| Litlhophiso tse fumanehang: | 1 – Konopo e tobetse hang
2 – Senotlolo se tobetse makhetlo a 2 4 – Senotlolo se tobetse makhetlo a 3 8 – Konopo tobetsa mme konopo e lokollwe |
|||||||
| Litlhophiso tsa kamehla: | 0 (ha ho litšoantšo tse rometsoeng) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 41. Kenyelletso 2 - litšoantšo tse rometsoeng | |||||||
| Tlhaloso: | Paramethara ena e hlalosa hore na ke liketso life tse fellang ka ho romela ID ea ketsahalo le tšobotsi eo ba e abetsoeng (sheba 9: Ho kenya tšebetsong
litšoantšo). Paramethara e sebetsa feela haeba parameter 21 e behiloe ho 2 kapa 3. |
|||||||
| Litlhophiso tse fumanehang: | 1 – Konopo e tobetse hang
2 – Senotlolo se tobetse makhetlo a 2 4 – Senotlolo se tobetse makhetlo a 3 8 – Konopo tobetsa mme konopo e lokollwe |
|||||||
| Litlhophiso tsa kamehla: | 0 (ha ho litšoantšo tse rometsoeng) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 47. Kenyelletso 1 - boleng bo rometsoeng ho sehlopha sa 2 sa mokhatlo ha se kentsoe | |||||||
| Tlhaloso: | Paramethara ena e hlalosa boleng bo rometsoeng ho lisebelisoa tsa sehlopha sa bobeli sa mokhatlo ha ho kenya IN2 (ho sebelisoa Basic.
Sehlopha sa Taelo). Paramethara e bohlokoa ha feela paramethara 20 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). |
|||||||
| Litlhophiso tse fumanehang: | 0-255 | |||||||
| Litlhophiso tsa kamehla: | 255 | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 49. Kenyelletso 1 - boleng bo rometsoeng ho sehlopha sa 2 sa mokhatlo ha se koetsoe | |||||||
| Tlhaloso: | Paramethara ena e hlalosa boleng bo rometsoeng ho lisebelisoa tsa sehlopha sa bobeli sa mokhatlo ha IN2 e koetsoe (ho sebelisoa Basic.
Sehlopha sa Taelo). Paramethara e bohlokoa ha feela paramethara 20 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). |
|||||||
| Litlhophiso tse fumanehang: | 0-255 | |||||||
| Litlhophiso tsa kamehla: | 0 | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 52. Kenyelletso 2 - boleng bo rometsoeng ho sehlopha sa 3rd sa mokhatlo ha se kentsoe | |||||||
| Tlhaloso: | Paramethara ena e hlalosa boleng bo rometsoeng ho lisebelisoa tsa sehlopha sa 3rd sa mokhatlo ha ho kenya IN2 (ho sebelisoa Basic.
Sehlopha sa Taelo). Paramethara e bohlokoa ha feela paramethara 21 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). |
|||||||
| Litlhophiso tse fumanehang: | 0-255 | |||||||
| Litlhophiso tsa kamehla: | 255 | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 54. Kenyelletso 2 - boleng bo rometsoeng ho sehlopha sa 3rd sa mokhatlo ha se koetsoe | |||||||
| Tlhaloso: | Paramethara ena e hlalosa boleng bo rometsoeng ho lisebelisoa tsa sehlopha sa 3 sa mokhatlo ha ho kenya IN2 ho koetsoe (ho sebelisoa Basic.
Sehlopha sa Taelo). Paramethara e bohlokoa ha feela paramethara 21 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). |
|||||||
| Litlhophiso tse fumanehang: | 0-255 | |||||||
| Litlhophiso tsa kamehla: | 10 | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 150. Kenyelletso 1 - kutloisiso | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako ea inertia ea ho kenya IN1 ka mekhoa ea alamo. Fetola paramethara ena ho thibela bouncing kapa
tšitiso ea pontšo. Paramethara e bohlokoa ha feela paramethara 20 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). |
|||||||
| Litlhophiso tse fumanehang: | 1-100 (10ms-1000ms, 10ms mohato) | |||||||
| Litlhophiso tsa kamehla: | 600 (10 mets) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 151. Kenyelletso 2 - kutloisiso | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako ea inertia ea ho kenya IN2 ka mekhoa ea alamo. Fetola paramethara ena ho thibela bouncing kapa
tšitiso ea pontšo. Paramethara e bohlokoa ha feela paramethara 21 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). |
|||||||
| Litlhophiso tse fumanehang: | 1-100 (10ms-1000ms, 10ms mohato) | |||||||
| Litlhophiso tsa kamehla: | 10 (100ms) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 152. Kenyeletso 1 - tieho ea ho hlakoloa ha alamo | |||||||
| Tlhaloso: | Paramethara ena e hlalosa tieho e eketsehileng ea ho hlakola alamo ka ho kenya IN1. Paramethara e bohlokoa ha feela paramethara 20 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). | |||||||
| Litlhophiso tse fumanehang: | 0 - ha ho tieho
1-3600s |
|||||||
| Litlhophiso tsa kamehla: | 0 (ha ho tieho) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 153. Kenyeletso 2 - tieho ea ho hlakoloa ha alamo | |||||||
| Tlhaloso: | Paramethara ena e hlalosa tieho e eketsehileng ea ho hlakola alamo ka ho kenya IN2. Paramethara e bohlokoa ha feela paramethara 21 e setetsoe ho 0 kapa 1 (mokhoa oa alamo). | |||||||
| Litlhophiso tse fumanehang: | 0 - ha ho tieho
0-3600s |
|||||||
| Litlhophiso tsa kamehla: | 0 (ha ho tieho) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 154. Sephetho sa 1 - logic ea ts'ebetso | |||||||
| Tlhaloso: | Paramethara ena e hlalosa logic ea ts'ebetso ea tlhahiso ea OUT1. | |||||||
| Litlhophiso tse fumanehang: | 0 – Mabitso a tlwaetse ho bulwa/kwalwa ha a sebetsa
1 – mabitso a tlwaelehileng a kwalwa/a buleha ha a sebetsa |
|||||||
| Litlhophiso tsa kamehla: | 0 (NO) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 155. Sephetho sa 2 - logic ea ts'ebetso | |||||||
| Tlhaloso: | Paramethara ena e hlalosa logic ea ts'ebetso ea tlhahiso ea OUT2. | |||||||
| Litlhophiso tse fumanehang: | 0 – Mabitso a tlwaetse ho bulwa/kwalwa ha a sebetsa
1 – mabitso a tlwaelehileng a kwalwa/a buleha ha a sebetsa |
|||||||
| Litlhophiso tsa kamehla: | 0 (NO) | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 156. Output 1 – auto off | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako eo ka mor'a moo OUT1 e tla tima ka bo eona. | |||||||
| Litlhophiso tse fumanehang: | 0 - ho tima ka bohona
1-27000 (0.1s-45min, 0.1s mohato) |
|||||||
| Litlhophiso tsa kamehla: | 0 (e koetsoe ka bo eona) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 157. Output 2 – auto off | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako eo ka mor'a moo OUT2 e tla tima ka bo eona. | |||||||
| Litlhophiso tse fumanehang: | 0 - ho tima ka bohona
1-27000 (0.1s-45min, 0.1s mohato) |
|||||||
| Litlhophiso tsa kamehla: | 0 (e koetsoe ka bo eona) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 63. Lisebelisoa tsa analog - phetoho e fokolang ea ho tlaleha | |||||||
| Tlhaloso: | Paramethara ena e hlalosa phetoho e fokolang (ho tloha ho tlaleho ea ho qetela) ea boleng ba tlhahiso ea analog e fellang ka ho romela tlaleho e ncha. Paramethara e sebetsa feela bakeng sa lisebelisoa tsa analoge (paramethara 20 kapa 21 e behiloeng ho 4 kapa 5). Ho beha boleng bo holimo haholo ho ka etsa hore ho se romeloe litlaleho. | |||||||
| Litlhophiso tse fumanehang: | 0 - tlaleho ea phetoho e holofetse
1-100 (0.1-10V, 0.1V mohato) |
|||||||
| Litlhophiso tsa kamehla: | EA-5-0.5V | Boholo ba paramethara: | 1 [byte] | |||||
| Paramethara: | 64. Lisebelisoa tsa analog - litlaleho tsa nako le nako | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako ea tlaleho ea boleng ba lisebelisoa tsa analog. Litlaleho tsa nako le nako ha li na liphetoho
ka boleng (parameter 63). Paramethara e sebetsa feela bakeng sa lisebelisoa tsa analoge (paramethara 20 kapa 21 e behiloeng ho 4 kapa 5). |
|||||||
| Litlhophiso tse fumanehang: | 0 - litlaleho tsa nako le nako li koetsoe
30-32400 (30-32400s) - nako ea tlaleho |
|||||||
| Litlhophiso tsa kamehla: | 0 (litlaleho tsa nako le nako li koetsoe) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 65. Sensor ea mocheso oa ka hare - phetoho e fokolang ea ho tlaleha | |||||||
| Tlhaloso: | Paramethara ena e hlalosa phetoho e fokolang (ho tloha ho ea ho qetela e tlalehiloeng) ea boleng ba sensor ea mocheso ea ka hare e fellang ka
ho romela tlaleho e ncha. |
|||||||
| Litlhophiso tse fumanehang: | 0 - tlaleho ea phetoho e holofetse
1-255 (0.1-25.5°C) |
|||||||
| Litlhophiso tsa kamehla: | 5 (0.5°C) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 66. Sensor ea mocheso oa ka hare - litlaleho tsa nako le nako | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako ea tlaleho ea boleng ba sensor ea mocheso ka hare. Litlaleho tsa nako le nako li ikemetse
ho tloha liphetohong tsa boleng (parameter 65). |
|||||||
| Litlhophiso tse fumanehang: | 0 - litlaleho tsa nako le nako li koetsoe
60-32400 (60s-9h) |
|||||||
| Litlhophiso tsa kamehla: | 0 (litlaleho tsa nako le nako li koetsoe) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 67. Li-sensor tsa ka ntle - phetoho e fokolang ea ho tlaleha | |||||||
| Tlhaloso: | Paramethara ena e hlalosa phetoho e nyane (ho tloha ho e tlalehiloeng ho qetela) ea boleng ba li-sensor tsa kantle (DS18B20 kapa DHT22)
seo se fella ka ho romela tlaleho e ncha. Paramethara e sebetsa feela bakeng sa lisensara tse hokahantsoeng tsa DS18B20 kapa DHT22. |
|||||||
| Litlhophiso tse fumanehang: | 0 - tlaleho ea phetoho e holofetse
1-255 (0.1-25.5 diyuniti, 0.1) |
|||||||
| Litlhophiso tsa kamehla: | 5 (0.5 diyuniti) | Boholo ba paramethara: | 2 [byte] | |||||
| Paramethara: | 68. Li-sensor tsa ka ntle - litlaleho tsa nako le nako | |||||||
| Tlhaloso: | Paramethara ena e hlalosa nako ea tlaleho ea boleng ba lisebelisoa tsa analog. Litlaleho tsa nako le nako ha li na liphetoho
ka boleng (parameter 67). Paramethara e sebetsa feela bakeng sa lisensara tse hokahantsoeng tsa DS18B20 kapa DHT22. |
|||||||
| Litlhophiso tse fumanehang: | 0 - litlaleho tsa nako le nako li koetsoe
60-32400 (60s-9h) |
|||||||
| Litlhophiso tsa kamehla: | 0 (litlaleho tsa nako le nako li koetsoe) | Boholo ba paramethara: | 2 [byte] | |||||
LIEKETSENG MOKHOPO
Sehlahisoa sa Smart-Control se hlahisoa ke Nice SpA (TV). Litemoso: - Litlhaloso tsohle tsa tekheniki tse boletsoeng karolong ena li bua ka mocheso o teng oa 20 °C (± 5 °C) - Nice SpA e na le tokelo ea ho etsa liphetoho sehlahisoa ka nako efe kapa efe ha ho bonahala ho hlokahala, ha e ntse e boloka ts'ebetso e ts'oanang. tshebediso e reriloeng.
| Smart-Taolo | |
| Phepelo ea motlakase | 9-30V DC ±10% |
| Lintho tse kenang | 2 0-10V kapa lisebelisoa tsa digital. 1 serial 1-terata e kentsoeng |
| Litholoana | Liphetho tse 2 tse se nang monyetla |
| Li-sensor tsa dijithale tse tšehelitsoeng | 6 DS18B20 kapa 1 DHT22 |
| Boholo ba hona joale ho lihlahisoa | 150mA |
| Boholo voltage ka lihlahisoa | 30V DC / 20V AC ±5% |
| Sebaka sa tekanyo ea tekanyo ea mocheso oa mocheso o hahiloeng | -55 ° C – 126 ° C |
| Mocheso oa ho sebetsa | 0–40°C |
| Litekanyo
(Bolelele x bophara x, x Bophahamo) |
29 x 18 x 13 limilimithara
(1.14" x 0.71" x 0.51") |
- Maqhubu a radio a sesebelisoa ka seng a tlameha ho ts'oana le molaoli oa hau oa Z-Wave. Lekola tlhahisoleseling lebokoseng kapa o botse morekisi oa hau haeba o sa tsebe hantle.
| Transceiver ea seea-le-moea | |
| Radio protocol | Z-Wave (500 series chip) |
| Sehlopha sa maqhubu | 868.4 kapa 869.8 MHz EU
921.4 kapa 919.8 MHz ANZ |
| Sebaka sa li-transceiver | ho fihlela 50m kantle ho fihlela 40m ka tlung
(ho ipapisitse le sebaka le sebopeho sa moaho) |
| Max. fetisa matla | EIRP boholo. 7dBm |
(*) Lebelo la li-transceiver le susumetsoa ka matla ke lisebelisoa tse ling tse sebetsang ka lebelo le ts'oanang le phetisetso e tsoelang pele, joalo ka li-alarm le li-headphones tsa seea-le-moea tse sitisang transceiver ea unit ea taolo.
TLHOKOMELO HLAHANG
Sehlahisoa sena ke karolo ea bohlokoa ea othomathike mme ka hona e tlameha ho lahloa hammoho le ea morao-rao.
Joalo ka ts'ebetsong, hape qetellong ea bophelo ba sehlahisoa, ts'ebetso ea ho qhaqholla le ho hlakola e tlameha ho etsoa ke basebetsi ba tšoanelehang. Sehlahisoa sena se entsoe ka mefuta e fapaneng ea lisebelisoa, tse ling tsa tsona li ka sebelisoa hape ha tse ling li tlameha ho hlakoloa. Batla tlhahisoleseling mabapi le litsamaiso tsa ho sebelisa hape le ho lahla tse lebelletsoeng ke melao ea lehae sebakeng sa heno bakeng sa sehlopha sena sa lihlahisoa. Tlhokomeliso! - likarolo tse ling tsa sehlahisoa li ka ba le lintho tse silafatsang kapa tse kotsi tseo, haeba li lahleloa tikolohong,
e ka baka tshenyo e kgolo tikolohong kapa bophelong bo botle ba mmele.
Joalokaha ho bontšitsoe ke letšoao ka thōko, ho lahla sehlahisoa sena ka litšila tsa malapeng ho thibetsoe ka thata. Arola litšila ka mekhahlelo bakeng sa ho lahla, ho latela mekhoa e lebelletsoeng ke molao oa hajoale sebakeng sa heno, kapa khutlisetsa sehlahisoa ho morekisi ha u reka mofuta o mocha.
Tlhokomeliso! - melao ea lehae e ka fana ka maikutlo a likotlo tse tebileng ha ho ka ba le ho lahla sehlahisoa sena hampe.
PHALALATSO TUMELO
Mona, Nice SpA, e phatlalatsa hore mofuta oa lisebelisoa tsa seea-le-moea Smart-Control o lumellana le Directive 2014/53/EU.
Mongolo o felletseng oa phatlalatso ea EU ea tumellano e fumaneha atereseng e latelang ea inthanete: http://www.niceforyou.com/en/support
E ntle SpA
Oderzo TV Italia
info@niceforyou.com
www.mellatooui.com
IS0846A00EN_15-03-2022
Litokomane / Lisebelisoa
 |
Mesebetsi e Ntle ea Smart-Control Smart Ho Lisebelisoa tsa Analog [pdf] Buka ea Taelo Smart-Control Smart Functionalities To Analog Devices, Smart-Control, Smart Functionalities To Analog Devices, Mesebetsi ho Lisebelisoa tsa Analog, Lisebelisoa tsa Analog, Lisebelisoa |