Smart functionality ka analọg ngwaọrụ
Ntuziaka na ịdọ aka ná ntị maka nrụnye na ojiji

ỊDỌ AKA NA NTỊ

• Kpachara anya! – Akwụkwọ ntuziaka a nwere ntuziaka dị mkpa na ịdọ aka ná ntị maka nchekwa nkeonwe. Jiri nlezianya gụọ akụkụ niile nke akwụkwọ ntuziaka a. Ọ bụrụ na ị na-enwe obi abụọ, kwụsịtụ echichi ozugbo wee kpọtụrụ Nice Technical Assistance.
• Kpachara anya! - Ntuziaka dị mkpa: dobe akwụkwọ ntuziaka a n'ebe nchekwa iji mee ka usoro nhazi na mkpofu ngwaahịa dị n'ọdịnihu.
• Kpachara anya! - A ghaghị ịrụ ọrụ nrụnye na njikọ niile naanị site n'aka ndị ọrụ tozuru oke na ndị nwere nkà na unit kwụsịrị na ọkụ eletrik.
• Kpachara anya! - Iji ọ bụla ọzọ karịa nke akọwapụtara ebe a ma ọ bụ na ọnọdụ gburugburu ebe obibi na-abụghị nke ekwuru n'akwụkwọ ntuziaka a, a ga-ewere ya dị ka ihe na-ekwesịghị ekwesị ma bụrụkwa nke amachibidoro!
• A ga -etufu ihe nkwakọ ngwaahịa ngwaahịa a na nrube isi n'iwu obodo.
• Ejila mgbanwe ọ bụla na ngwaọrụ ọ bụla. Ịrụ ọrụ ndị ọzọ karịa nke akọwapụtara nwere ike bute naanị malfunctions. Onye nrụpụta na -agbada ibu ọrụ niile maka mmebi butere mgbanwe na -adịte aka na ngwaahịa a.
• Edokwala ngwaọrụ ahụ nso n'ebe ikpo ọkụ na-ekpo ọkụ ma ghara ikpughe n'ọkụ gba ọtọ. Omume ndị a nwere ike imebi ngwaahịa na kpatara ya
  nsogbu.
• Emebeghi ngwaahịa a maka ndị mmadụ (gụnyere ụmụaka) nwere ike anụ ahụ, mmetụta uche ma ọ bụ nke enweghị ahụmahụ na amamihe, ma ọ bụrụ na enyereghị ha nlekọta ma ọ bụ ntụziaka gbasara iji ngwaahịa ahụ site n'aka onye na-ahụ maka nchekwa ha.
• Ejikwa vol echekwabara kwadoro ngwaọrụ atage. Ka o sina dị, onye ọrụ kwesịrị ịkpachara anya ma ọ bụ nyefee onye ruru eru itinye ya.
• Jikọọ naanị dị ka otu n'ime eserese ndị ewepụtara na ntuziaka. Njikọ na-ezighi ezi nwere ike ibute ihe egwu na ahụike, ndụ ma ọ bụ ihe onwunwe.
• Emebere ngwaọrụ ahụ maka ntinye na igbe ngbanwe mgbidi na-erughị 60mm. Igbe ngbanwe na njikọ ọkụ eletrik ga-ekwenyerịrị na ụkpụrụ nchekwa obodo dị mkpa.
• Ewepụla ngwaahịa a na mmiri, mmiri ma ọ bụ mmiri mmiri ndị ọzọ.
• Emebere ngwaahịa a maka naanị ime ụlọ. Ejila n'èzí!
• Ngwaahịa a abụghị ihe egwuregwu ụmụaka. Wepụ ụmụaka na anụmanụ!

Nkọwapụta ngwaahịa

Smart-Control na-enye ohere ịkwalite arụmọrụ nke ihe mmetụta wired na ngwaọrụ ndị ọzọ site na ịgbakwunye nzikọrịta ozi netwọk Z-Wave™.
Ị nwere ike ijikọ ọnụọgụ ọnụọgụ abụọ, sensọ analọg, DS18B20 okpomọkụ sensọ ma ọ bụ DHT22 iru mmiri na ihe mmetụta okpomọkụ iji kọọ ọgụgụ ha na njikwa Z-Wave. Ọ nwekwara ike ijikwa ngwaọrụ site na imeghe/imechi kọntaktị mmepụta na-adabereghị na ntinye.
Isi atụmatụ

• Na-enye ohere ijikọ sensọ:
  » 6 DS18B20 sensọ,
  » 1 DHT ihe mmetụta,
  » 2 2-waya ihe mmetụta analọgụ,
  » 2 3-waya ihe mmetụta analọgụ,
  » 2 ọnụọgụ abụọ.
• Ihe mmetụta okpomọkụ arụnyere n'ime ya.
• Na-akwado ụdị nchekwa netwọkụ Z-Wave™: S0 nwere izo ya ezo AES-128 yana S2 enwetara ya na nzuzo dabere na PRNG.
• Na-arụ ọrụ dị ka ihe nkwugharị mgbama Z-Wave (ngwaọrụ niile anaghị arụ ọrụ batrị n'ime netwọkụ ahụ ga-arụ ọrụ dị ka ndị na-emegharị ihe iji bulie ntụkwasị obi nke netwọkụ ahụ).
• Enwere ike iji ya na ngwaọrụ niile enwetara asambodo Z-Wave Plus™ na kwesịrị dakọtara na ụdị ngwaọrụ ndị nrụpụta ndị ọzọ mepụtara.

Smart-Control bụ ngwaọrụ Z-Wave Plus™ dakọtara nke ọma.
Enwere ike iji ngwaọrụ a yana ngwaọrụ niile ejiri asambodo Z-Wave Plus nweta ma kwekọọ na ụdị ngwaọrụ ndị nrụpụta ndị ọzọ mepụtara. Ngwa niile anaghị arụ ọrụ batrị n'ime netwọkụ ahụ ga-arụ ọrụ dị ka ndị na-emegharịgharị iji mee ka ntụkwasị obi nke netwọk ahụ dịkwuo elu. Ngwa a bụ ngwaahịa Z-Wave Plus nchekwa akwadoro yana njikwa Z-Wave akwadoro ga-enwerịrị ike ijikwa ngwaahịa ahụ nke ọma. Ngwaọrụ na-akwado ụdị nchekwa netwọk Z-Wave: S0 nwere nzuzo AES-128 na S2.
Emere ya site na izo ya ezo PRNG.

Ịwụnye

Ijikọ ngwaọrụ n'ụzọ na-ekwekọghị na ntuziaka a nwere ike bute ihe egwu na ahụike, ndụ ma ọ bụ ihe onwunwe.

• Jikọọ naanị dịka otu eserese ahụ si dị,
• Eji vol echekwabara kwadoro ngwaọrụ atage; ka o sina dị, onye ọrụ kwesịrị ịkpachara anya ma ọ bụ nyefee onye ruru eru nrụnye,
• Ejikọla ngwaọrụ ndị na-adabaghị na nkọwapụta,
• Ejikọla sensọ ndị ọzọ karịa DS18B20 ma ọ bụ DHT22 na ọdụ SP na SD,
• Ejikọla sensọ na ọdụ SP na SD nwere waya karịrị mita 3,
• Ejila ihe dị ugbu a gafere ihe karịrị 150mA,
• Ngwa ọ bụla ejikọrọ kwesịrị ịkwado ụkpụrụ nchekwa dị mkpa,
• Ekwesịrị ịhapụ ahịrị ejighi mma.

Ndụmọdụ maka ịhazi antenna:

• Chọta antenna ka ọ dị anya site na ihe ọla dị ka o kwere mee (ijikọ wires, mgbanaka akara, wdg) iji gbochie ndabichi,
• Igwe igwe na-adị n'akụkụ antenna ahụ ozugbo (dịka igbe igwe etinyere, okpokolo agba ígwè) nwere ike imebi nnabata mgbaama!
• Ebipụla ma ọ bụ belata antenna - ogologo ya dabara nke ọma na eriri nke sistemụ na-arụ ọrụ.
• Jide n'aka na ọ dịghị akụkụ nke antenna na-apụ na igbe mgba ọkụ mgbidi.

3.1 - ndetu maka eserese
ANT (nwa) - antenna
GND (acha anụnụ anụnụ) - onye nduzi ala
SD (ọcha) - onye na-eduzi mgbaàmà maka DS18B20 ma ọ bụ DHT22 sensọ
SP (aja aja) - onye na-enye ọkụ eletrik maka DS18B20 ma ọ bụ DHT22 sensọ (3.3V)
IN2 (akwụkwọ ndụ akwụkwọ ndụ) – ntinye mba. 2
IN1 (edo edo) - ntinye mba. 1
GND (acha anụnụ anụnụ) - onye nduzi ala
P (red) - onye na-enye ọkụ eletrik
OUT1 - mmepụta mba. 1 ekenyere itinye IN1
OUT2 - mmepụta mba. 2 ekenyere itinye IN2
B - bọtịnụ ọrụ (a na-eji gbakwunye / wepụ ngwaọrụ ahụ)

3.2 - Njikọ na akara mkpu

1. Gbanyụọ usoro mkpu.
2. Jikọọ na otu n'ime eserese dị n'okpuru:
3. Nyochaa izi ezi nke njikọ.
4. Hazie ngwaọrụ na antenna ya n'ime ụlọ.
5. Kwado ngwaọrụ ahụ.
6. Tinye ngwaọrụ na netwọk Z-Wave.
7. Gbanwee ụkpụrụ nke parampat:
   • Ejikọrọ na IN1:
   » Na-adịkarị nso: gbanwee oke 20 ka ọ bụrụ 0
   » Ọ na-emepe emepe: gbanwee oke 20 gaa na 1
   • Ejikọrọ na IN2:
   » Na-adịkarị nso: gbanwee oke 21 ka ọ bụrụ 0
   » Ọ na-emepe emepe: gbanwee oke 21 gaa na 1

3.3 - Njikọ na DS18B20
Enwere ike itinye ihe mmetụta DS18B20 n'ụzọ dị mfe ebe ọ bụla achọrọ nha okpomọkụ. Ọ bụrụ na emere usoro nchekwa kwesịrị ekwesị, enwere ike iji ihe mmetụta na gburugburu iru mmiri ma ọ bụ n'okpuru mmiri, enwere ike itinye ya na kọmpụta ma ọ bụ tinye ya n'okpuru ala. Ị nwere ike jikọọ ruo 6 DS18B20 sensọ n'otu aka ahụ na ọnụ SP-SD.

1. Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3. Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.

3.4 - Njikọ na DHT22
Enwere ike itinye ihe mmetụta DHT22 n'ụzọ dị mfe ebe ọ bụla achọrọ nha iru mmiri na okpomọkụ.
Ị nwere ike jikọọ naanị 1 DHT22 sensọ na ọdụ TP-TD.

1.  Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3. Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.

3.5 - Njikọ na 2-waya 0-10V sensọ
Ihe mmetụta analọgụ 2-waya chọrọ ihe mgbochi ndọpụta.
Ị nwere ike jikọọ ihe ruru 2 analog sensọ na IN1/IN2 ọnụ.
A chọrọ ọkọnọ 12V maka ụdị sensọ ndị a.

1. Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3. Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.
6. Gbanwee ụkpụrụ nke parampat:
   • Ejikọrọ na IN1: gbanwee oke 20 gaa na 5
   • Ejikọrọ na IN2: gbanwee oke 21 gaa na 5

3.6 - Njikọ na 3-waya 0-10V sensọ
Ị nwere ike ijikọ ihe ruru 2 ihe mmetụta analọgụ IN1/IN2 ọnụ.

1. Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3. Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.
6. Gbanwee ụkpụrụ nke parampat:
   • Ejikọrọ na IN1: gbanwee oke 20 gaa na 4
   • Ejikọrọ na IN2: gbanwee oke 21 gaa na 4

3.7 - Njikọ na ọnụọgụ ọnụọgụ abụọ
Ị jikọọ sensọ ọnụọgụ abụọ mepere emepe ma ọ bụ na-ejikarị na ọdụ IN1/IN2.

1. Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3. Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.
6. Gbanwee ụkpụrụ nke parampat:
   • Ejikọrọ na IN1:
   » Na-adịkarị nso: gbanwee oke 20 ka ọ bụrụ 0
   » Ọ na-emepe emepe: gbanwee oke 20 gaa na 1
   • Ejikọrọ na IN2:
   » Na-adịkarị nso: gbanwee oke 21 ka ọ bụrụ 0
   » Ọ na-emepe emepe: gbanwee oke 21 gaa na 1

3.8 - Njikọ na bọtịnụ
Ị nwere ike jikọọ monostable ma ọ bụ bistable switches na IN1/IN2 ọnụ iji mee ka ihe nkiri rụọ ọrụ.

1. Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3.  Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.
6. Gbanwee ụkpụrụ nke parampat:

• Ejikọrọ na IN1:
  » Monostable: gbanwee oke 20 gaa na 2
  » Bistable: gbanwee oke 20 gaa na 3
• Ejikọrọ na IN2:
  » Monostable: gbanwee oke 21 gaa na 2
  » Bistable: gbanwee oke 21 gaa na 3

3.9 - Njikọ na oghere ọnụ ụzọ ámá
Enwere ike jikọọ Smart-Control na ngwaọrụ dị iche iche iji jikwaa ha. Na nke a exampọ na-ejikọta ya na oghere ọnụ ụzọ na ntinye mkpali (mmetụta ọ bụla ga-amalite ma kwụsị moto ọnụ ụzọ ámá, na-emeghe ọzọ / mechie)

1.  Kwupu ike.
2. Jikọọ dị ka eserese dị n'aka nri.
3. Nyochaa izi ezi nke njikọ.
4. Kwado ngwaọrụ ahụ.
5. Tinye ngwaọrụ na netwọk Z-Wave.
6. Gbanwee ụkpụrụ nke parampat:

• Jikọọ na IN1 na OUT1:
  » Gbanwee oke 20 ka ọ bụrụ 2 (bọtịnụ nwere ike ime)
  » Gbanwee oke 156 ka ọ bụrụ 1 (0.1s)
• Jikọọ na IN2 na OUT2:
  » Gbanwee oke 21 ka ọ bụrụ 2 (bọtịnụ nwere ike ime)
  » Gbanwee oke 157 ka ọ bụrụ 1 (0.1s)

Ịgbakwunye ngwaọrụ

• Koodu DSK zuru ezu dị naanị na igbe ahụ, jide n'aka na idobe ya ma ọ bụ detuo koodu ahụ.
• N'ihe banyere nsogbu na itinye ngwaọrụ ahụ, biko tọgharịa ngwaọrụ ma megharịa usoro mgbakwunye.

Na-agbakwụnye (Ntinye) - Ọnọdụ mmụta ngwaọrụ Z-Wave, na-enye ohere ịgbakwunye ngwaọrụ na netwọk Z-Wave dị.

4.1 - Na-agbakwunye aka
Iji aka tinye ngwaọrụ na netwọk Z-Wave na aka:

1.  Kwado ngwaọrụ ahụ.
2. Tọọ isi njikwa na (Security/non-Security Mode) tinye mode (lee akwụkwọ ntuziaka onye njikwa).
3.  Ngwa ngwa, bọtịnụ pịa okpukpu atọ na ụlọ ngwaọrụ ma ọ bụ gbanwee jikọọ na IN1 ma ọ bụ IN2.
4. Ọ bụrụ na ị na-agbakwunye na Nchekwa S2 Authenticated, nyochaa koodu DSK QR ma ọ bụ tinye koodu PIN 5-nọmba (akara n'okpuru igbe).
5. LED ga-amalite ịcha edo edo, chere ka usoro mgbakwunye ahụ kwụsị.
6. Mgbakwunye na-aga nke ọma ga-akwado ozi onye njikwa Z-Wave.

4.2 - Na-agbakwụnye site na iji SmartStart
Enwere ike ịgbakwunye ngwaahịa enyere SmartStart n'ime netwọkụ Z-Wave site na inyocha koodu Z-Wave QR dị na ngwaahịa ahụ yana onye njikwa na-enye nsonye SmartStart. A ga-agbakwunye ngwaahịa SmartStart na-akpaghị aka n'ime nkeji iri agbanyere n'ime netwọkụ.
Iji SmartStart tinye ngwaọrụ na netwọk Z-Wave:

1. Tọọ isi njikwa na Nchekwa S2 Ụdị mgbakwunye agbakwunyere (lee akwụkwọ ntuziaka onye njikwa).
2. Nyochaa koodu QR DSK ma ọ bụ tinye koodu PIN nke nwere ọnụọgụ 5 (akara dị n'okpuru igbe).
3. Kwado ngwaọrụ ahụ.
4. LED ga-amalite ịcha edo edo, chere ka usoro mgbakwunye ahụ kwụsị.
5. A ga-akwado mgbakwunye ga-aga nke ọma site na ozi onye njikwa Z-Wave

Iwepu ngwaọrụ

Iwepu (wepu) - Ọnọdụ mmụta ngwaọrụ Z-Wave, na-enye ohere iwepu ngwaọrụ na netwọkụ Z-Wave dị ugbu a.
Iji wepu ngwaọrụ site na netwọk Z-Wave:

1.  Kwado ngwaọrụ ahụ.
2. Debe onye isi n'ime ọnọdụ wepụ (lee akwụkwọ ntuziaka onye njikwa).
3. Ngwa ngwa, bọtịnụ pịa okpukpu atọ na ụlọ ngwaọrụ ma ọ bụ gbanwee jikọọ na IN1 ma ọ bụ IN2.
4. LED ga-amalite ịcha odo odo, chere ka usoro iwepụ ya kwụsị.
5. A ga-akwado iwepụ nke ọma site na ozi onye njikwa Z-Wave.

ndetu:

• Iwepụ ngwaọrụ ahụ na-eweghachi parampat niile nke ngwaọrụ ahụ, mana ọ naghị emegharị data nleta ike.
• Iwepu iji ngbanwe ejikọrọ na IN1 ma ọ bụ IN2 na-arụ ọrụ naanị ma ọ bụrụ na edobere paramita 20 (IN1) ma ọ bụ 21 (IN2) na 2 ma ọ bụ 3 na oke 40 (IN1) ma ọ bụ 41 (IN2) anaghị ekwe ka izipu ihe nkiri maka ịpị ugboro atọ.

NA-arụ ọrụ ngwaọrụ

6.1 - Ịchịkwa mmepụta
Enwere ike iji ntinye ma ọ bụ bọtịnụ B jikwaa nsonaazụ:

• otu ọpịpị - gbanwee mmepụta OUT1
• Pịa ugboro abụọ - gbanwee mmepụta OUT2

6.2 - Ihe ngosi anya
Igwe ọkụ ọkụ arụnyere na-egosi ọkwa ngwaọrụ ugbu a.
Mgbe ikenye ngwaọrụ ahụ ike:

• Green - ngwaọrụ agbakwunyere na netwọkụ Z-Wave (na-enweghị Nchekwa S2)
• Magenta – ngwaọrụ agbakwunyere na netwọkụ Z-Wave (ya na Nchekwa S2 kwadoro)
• Uhie – etinyeghị ngwaọrụ na netwọk Z-Wave

Mmelite:

• cyan na-egbuke egbuke - mmelite na-aga n'ihu
• Green - mmelite gara nke ọma (agbakwunyere na-enweghị Nchekwa S2)
• Magenta - mmelite gara nke ọma (agbakwunyere ya na Nchekwa S2 Authenticated)
• Uhie - mmelite agaghị aga nke ọma

NchNhr:

• 3 blinks akwụkwọ ndụ akwụkwọ ndụ - na-abanye na menu (agbakwunyere na-enweghị Nchekwa S2)
• 3 magenta blinks – na-abanye na menu (agbakwunyere na Nchekwa S2 Authenticated)
• 3 blinks na-acha uhie uhie - na-abanye na menu (anaghị etinye ya na netwọkụ Z-Wave)
• Magenta – nso ule
• Yellow - nrụpụta

6.3 - NchNhr
NchNhr na-enye ohere ịme omume netwọkụ Z-Wave. Ka ị na-eji menu:

1. Pịa ma jide bọtịnụ ka ịbanye n'ime menu, ngwaọrụ na-egbuke egbuke ka ọ bụrụ ọkwa agbakwunye (lee 7.2 - egosi anya).
2. Hapụ bọtịnụ ahụ mgbe ngwaọrụ gosipụtara ọnọdụ achọrọ yana agba:
   • MAGENTA – nnwale nso nso
   • odo odo – tọgharịa ngwaọrụ
3.  Ngwa ngwa pịa bọtịnụ iji gosi.

6.4 - Ịtọgharịa na ndabara ụlọ ọrụ
Usoro nrụpụta na-enye ohere iweghachi ngwaọrụ ahụ na ntọala ụlọ ọrụ ya, nke pụtara na a ga-ehichapụ ozi niile gbasara njikwa Z-Wave na nhazi onye ọrụ.
Rịba ama. Ịtọgharịa ngwaọrụ abụghị ụzọ akwadoro isi wepụ ngwaọrụ na netwọk Z-Wave. Jiri usoro ntọgharị naanị ma ọ bụrụ na onye na-ahụ maka rimary adịghị ma ọ bụ enweghị ike ịrụ ọrụ. Enwere ike nweta ụfọdụ iwepụ ngwaọrụ site na usoro iwepụ nke akọwara.

1. Pịa ma jide bọtịnụ ka ịbanye menu.
2. Bọtịnụ mwepụta mgbe ngwaọrụ na-enwu edo edo.
3. Ngwa ngwa pịa bọtịnụ iji gosi.
4. Mgbe sekọnd ole na ole gachara ngwaọrụ a ga-amalitegharị, nke ejiri agba uhie gosi akara.

Nnwale ebili mmiri Z-ebili mmiri

Ngwaọrụ arụnyere n'ime ihe nleba anya nke netwọkụ Z-Wave.

• Iji mee ka nnwale oke Z-Wave nwee ike, a ga-agbakwunye ngwaọrụ ahụ na njikwa Z-Wave. Nnwale nwere ike imesi netwọk ahụ ike, ya mere a na-atụ aro ka ịme ule ahụ naanị n'ọnọdụ pụrụ iche.

Iji nwalee oke onye njikwa:

1. Pịa ma jide bọtịnụ ka ịbanye menu.
2.  bọtịnụ mwepụta mgbe ngwaọrụ na-egbuke egbuke magenta.
3. Ngwa ngwa pịa bọtịnụ iji gosi.
4. Ihe ngosi a na-ahụ anya ga-egosi oke netwọkụ Z-Wave (ụdị akara ngosi akọwapụtara n'okpuru).
5. Ka ịpụ apụ ule nso Z-Wave, pịa bọtịnụ obere oge.

Ụdị akara ngosi Z-Wave:

• Ihe ngosi a na-ahụ anya na-agbapụta akwụkwọ ndụ akwụkwọ ndụ - ngwaọrụ ahụ na-anwa ịmepụta nkwurịta okwu na onye njikwa isi. Ọ bụrụ na mbọ nkwurịta okwu ozugbo ada ada, ngwaọrụ ahụ ga-anwa ịmepụta nzikọrịta ozi emebi emebi, site na modul ndị ọzọ, nke a ga-egosipụta site na ihe ngosi anya na-agba odo.
• Ihe ngosi a na-ahụ anya na-acha akwụkwọ ndụ akwụkwọ ndụ - ngwaọrụ na-agwa onye njikwa isi okwu ozugbo.
• Ngosipụta anya na-agba agba odo - ngwaọrụ ahụ na-anwa ịmepụta nkwurịta okwu mebiri emebi na onye njikwa isi site na modul ndị ọzọ (ndị na-emegharị).
• Ihe ngosi anya na-acha odo odo - ngwaọrụ na-ekwurịta okwu na onye njikwa isi site na modul ndị ọzọ. Mgbe sekọnd 2 gachara ngwaọrụ ahụ ga-agbalikwa ịmalite nzikọrịta ozi na onye njikwa isi, nke a ga-eji akara ngosi na-agba akwụkwọ ndụ akwụkwọ ndụ.
• Ihe ngosi a na-ahụ anya na-akụ violet - ngwaọrụ ahụ na-akpakọrịta n'ebe kacha dị anya nke netwọkụ Z-Wave. Ọ bụrụ na njikọ ahụ ga-aga nke ọma, a ga-eji ọkụ na-acha odo odo kwado ya. A naghị atụ aro ka iji ngwaọrụ na oke oke.
• Ihe ngosi a na-ahụ anya na-acha uhie uhie - ngwaọrụ enweghị ike ijikọ na onye njikwa ozugbo ma ọ bụ site na ngwaọrụ netwọk Z-Wave ọzọ (na-emegharị).

Rịba ama. Ụdị nzikọrịta ozi nke ngwaọrụ nwere ike ịgbanwe n'etiti ozugbo na otu na-eji routing, karịsịa ma ọ bụrụ na ngwaọrụ dị na njedebe nke oke.

Ebe ngosi ọkụ

Ngwaọrụ ahụ nwere ike ịgbalite ihe onyonyo na njikwa Z-Wave site na izipu NJ ọnọdụ yana njirimara otu ihe na-eji Central Scene Command Class.
Ka ọrụ a wee rụọ ọrụ jikọọ monostable ma ọ bụ bistable mgbanwe na ntinye IN1 ma ọ bụ IN2 wee tọọ oke 20 (IN1) ma ọ bụ 21 (IN2) gaa na 2 ma ọ bụ 3.
Site na ndabara ọnọdụ anaghị arụ ọrụ, tọọ paramita 40 na 41 iji mee ka mmalite ọnọdụ ọnọdụ maka omume ahọpụtara.

Tebụl A1 - Omume na-eme ka ihe nkiri rụọ ọrụ
Gbanwee	Omume	NJ ngosi	Njirimara
Gbanwee jikọọ na ọdụ IN1	Gbanwee pịa otu ugboro	1	Etinyere igodo otu ugboro
	Gbanwee pịa ugboro abụọ	1	Etinyere igodo ugboro 2
	Gbanwee pịa ugboro atọ*	1	Etinyere igodo ugboro 3
	Ejidere ngbanwe**	1	Ejidere igodo
	Mgbanwe ewepụtara**	1	Ewepụtara igodo
Gbanwee jikọọ na ọdụ IN2	Gbanwee pịa otu ugboro	2	Etinyere igodo otu ugboro
	Gbanwee pịa ugboro abụọ	2	Etinyere igodo ugboro 2
	Gbanwee pịa ugboro atọ*	2	Etinyere igodo ugboro 3
	Ejidere ngbanwe**	2	Ejidere igodo
	Mgbanwe ewepụtara**	2	Ewepụtara igodo

* Ịgbanye ọpịpị ugboro atọ ga-anabata iwepụ site na iji ọdụ ntinye.
** Ọ dịghị maka mgbanwe mgbanwe.

NSỌP .R.

Njikọ (ngwaọrụ njikọ) - njikwa ngwa ngwa nke ngwaọrụ ndị ọzọ n'ime netwọkụ sistemụ Z-Wave dịka Dimmer, Relay Switch, Roller Shutter ma ọ bụ ọnọdụ (enwere ike ịchịkwa naanị site na njikwa Z-Wave). Njikọ na-eme ka ịnyefe iwu njikwa ozugbo n'etiti ngwaọrụ, a na-eme ya na-enweghị ikere òkè nke onye njikwa na-achọ ka ngwaọrụ jikọtara ya na nso nso.
Ngwa ahụ na-enye njikọ nke otu abụọ:
Otu mkpakọrịta 1st – “Lifeline” na-akọ ọkwa ngwaọrụ ma na-enye ohere ikenye naanị otu ngwaọrụ (onye njikwa na ndabara).
Otu mkpakọrịta nke abụọ - "Gbanye / Gbanyụọ (IN2)" ka ekenye ya na ntinye ntinye IN1 (na-eji klas iwu Basic).
Otu mkpakọrịta nke atọ - "Gbanye / Gbanyụọ (IN3)" ka ekenye ya na ntinye ntinye IN2 (na-eji klas iwu Basic).
Ngwa dị na 2nd na 3rd otu na-enye ohere ijikwa ngwaọrụ 5 mgbe niile ma ọ bụ multichannel maka otu mkpakọrịta, ma e wezụga "LifeLine" nke edobere naanị maka onye na-ahụ maka njikwa na ya mere naanị 1 node nwere ike inye.

Nkọwapụta Z-WAVE

Tebụl A2 - Klas Iwu kwadoro
	Klas Iwu	Ụdị		Chekwaa
1.	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]	V2
2.	COMMAND_CLASS_SWITCH_BINARY [0x25]	V1		EE
3.	COMMAND_CLASS_ASSOCIATION [0x85]	V2		EE
4.	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]	V3		EE
5.	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]	V2		EE
6.	COMMAND_CLASS_TRANSPORT_SERVICE [0x55]	V2
7.	COMMAND_CLASS_VERSION [0x86]	V2		EE
8.	COMMAND_CLASS_MANUFACTURER_SPECIFIC [0x72]	V2		EE
9.	COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A]	V1		EE
10.	COMMAND_CLASS_POWERLEVEL [0x73]	V1		EE
11.	COMMAND_CLASS_SECURITY [0x98]	V1
12.	COMMAND_CLASS_SECURITY_2 [0x9F]	V1
13.	COMMAND_CLASS_CENTRAL_SCENE [0x5B]		V3	EE
14.	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]		V11	EE
15.	COMMAND_CLASS_MULTI_CHANNEL [0x60]		V4	EE
16.	COMMAND_CLASS_CONFIGURATION [0x70]		V1	EE
17.	COMMAND_CLASS_CRC_16_ENCAP [0x56]		V1
18.	COMMAND_CLASS_NOTIFICATION [0x71]		V8	EE
19.	COMMAND_CLASS_PROTECTION [0x75]		V2	EE
20.	COMMAND_CLASS_FIRMWARE_UPDATE_MD [0x7A]		V4	EE
21.	COMMAND_CLASS_SUPERVISION [0x6C]		V1
22.	COMMAND_CLASS_APPLICATION_STATUS [0x22]		V1
23.	COMMAND_CLASS_BASIC [0x20]		V1	EE

Tebụl A3 - Klas Iwu Multichannel
MULTICHANNEL CC
Mkpọrọgwụ (Nkwụsị 1)
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_NOTIFICATION
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_NOTIFICATION_SENSOR
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Ntinye 1 - ngosi
Ngwụcha 2
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_NOTIFICATION
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_NOTIFICATION_SENSOR
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Ntinye 2 - ngosi

Ngwụcha 3
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_MULTILEVEL
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Ntinye Analog 1 – Voltage Ọkwa
Ngwụcha 4
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_MULTILEVEL
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Ntinye Analog 2 – Voltage Ọkwa
Ngwụcha 5
Klas Generic Ngwaọrụ	GENERIC_TYPE_SWITCH_BINARY
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_POWER_SWITCH_BINARY
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_SWITCH_BINARY [0x25]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_PROTECTION [0x75]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Mmepụta 1

Ngwụcha 6
Klas Generic Ngwaọrụ	GENERIC_TYPE_SWITCH_BINARY
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_POWER_SWITCH_BINARY
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_SWITCH_BINARY [0x25]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_PROTECTION [0x75]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Mmepụta 2
Ngwụcha 7
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_MULTILEVEL
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Okpomọkụ - ihe mmetụta dị n'ime
Ebe njedebe 8-13 (mgbe ejiri DS18S20 sensọ)
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_MULTILEVEL
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Okpomọkụ – ihe mmetụta mpụga DS18B20 No 1-6

Ebe njedebe 8 (mgbe ejikọrọ DHT22 sensọ)
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_MULTILEVEL
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Klas iwu	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Okpomọkụ - ihe mmetụta mpụga DHT22
Ebe njedebe 9 (mgbe ejikọrọ DHT22 sensọ)
Klas Generic Ngwaọrụ	GENERIC_TYPE_SENSOR_MULTILEVEL
Klas Ngwaọrụ akọwapụtara	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Nkọwa	Iru mmiri - ihe mmetụta mpụga DHT22

Ngwa ahụ na-eji Klasị Iwu ngosi iji kọọ ihe omume dị iche iche n'aka onye njikwa (otu "Lifeline"):

Tebụl A4 - Klas Iwu ngosi
Mkpọrọgwụ (Nkwụsị 1)
Ụdị ọkwa	Ihe omume
Nchebe ụlọ [0x07]	Ebe Amaghị Mwabata [0x02]
Ngwụcha 2
Ụdị ọkwa	Ihe omume
Nchebe ụlọ [0x07]	Ebe Amaghị Mwabata [0x02]
Ngwụcha 7
Ụdị ọkwa	Ihe omume	Omume/State Param-eter
Sistemu [0x09]	Ọdịda ngwaike sistemụ nwere koodu ọdịda nke onye nrụpụta [0x03]	Okpomọkụ ngwaọrụ [0x03]
Ọgwụgwụ 8-13
Ụdị ọkwa	Ihe omume
Sistemu [0x09]	Ọdịda ngwaike sistemụ [0x01]

Klas nchekwa nchekwa na-enye ohere igbochi njikwa mpaghara ma ọ bụ n'ime anya nke nsonaazụ.

Tebụl A5 - Nchedo CC:
Ụdị	Steeti	Nkọwa	Ndumodu
Mpaghara	0	Edobeghi nchekwa - Echekwaghị ngwaọrụ a, enwere ike ijikwa ya nke ọma site na interface onye ọrụ.	Ntinye na ntinye ejikọrọ.
Mpaghara	2	Enweghị ọrụ ọ bụla ga - ekwe omume - enweghị ike ịgbanwe ọnọdụ mmepụta site na bọtịnụ B ma ọ bụ ntinye kwekọrọ	Akwụsịla ntinye na ntinye.
RF	0	Enweghị nchekwa - Ngwaọrụ na-anabata ma zaghachi Iwu RF niile.	Enwere ike ijikwa nsonaazụ site na Z-Wave.
RF	1	Enweghị njikwa RF - klaasị isi na ọnụọgụ ọnụọgụ ajụ, klaasị ọ bụla ọzọ ga-edozi	Enweghị ike ijikwa mmepụta site na Z-Wave.

Tebụl A6 - Maapụ otu mkpakọrịta
Mgbọrọgwụ	Ebe njedebe	Otu mkpakọrịta na njedebe
Otu otu 2	Ngwụcha 1	Otu otu 2
Otu otu 3	Ngwụcha 2	Otu otu 2

Tebụl A7 – Isi iwu maapụ
Iwu	Mgbọrọgwụ	Njedebe
		1-2	3-4	5-6	7-13
Ntọala ntọala	= EP1	Ajuju ngwa	Ajuju ngwa	Gbanwee ọnụọgụ ọnụọgụ abụọ	Ajuju ngwa
Nweta isi	= EP1	Nweta ọkwa	Ihe mmetụta Multi-ọkwa Nweta	Gbanwee ọnụọgụ abụọ Get	Ihe mmetụta Multi-ọkwa Nweta
Akụkọ bụ isi	= EP1	ngosi Akuko	Akụkọ ihe mmetụta ọtụtụ ọkwa	Gbanwee akụkọ ọnụọgụ abụọ	Akụkọ ihe mmetụta ọtụtụ ọkwa

Tebụl A8 - Maapụ klaasị ndị ọzọ
Klas Iwu	Edebere mgbọrọgwụ na
Sensọ Multilevel	Ngwụcha 7
Mgbanwe ọnụọgụ abụọ	Ngwụcha 5
Nchedo	Ngwụcha 5

NDỤMỌDỤ NKE ALA

Ngwaọrụ na-enye ohere iji hazie ọrụ ya na mkpa onye ọrụ site na iji paramita nhazi.
Enwere ike ịhazi ntọala ahụ site na njikwa Z-Wave nke etinyere ngwaọrụ ahụ. Ụzọ edozi ha nwere ike ịdị iche dabere na njikwa.
Ọtụtụ n'ime paramita ahụ dabara naanị maka ụdị ntinye arụ ọrụ akọwapụtara (nkeji 20 na 21), lelee tebụl dị n'okpuru:

Tebụl A9 - Ndabere n'usoro - Oke 20
Ihe 20	Nọmba 40	Nọmba 47	Nọmba 49	Nọmba 150	Nọmba 152	Nọmba 63	Nọmba 64
0 ma ọ bụ 1		✓	✓	✓	✓
2 ma ọ bụ 3	✓					✓	✓
4 ma ọ bụ 5						✓	✓

Tebụl A10 - Ndabere n'usoro - Oke 21
Ihe 21	Nọmba 41	Nọmba 52	Nọmba 54	Nọmba 151	Nọmba 153	Nọmba 63	Nọmba 64
0 ma ọ bụ 1		✓	✓	✓	✓
2 ma ọ bụ 3	✓
4 ma ọ bụ 5						✓	✓

Tebụl A11 - Smart-Control - Parampat dị
Oke:	20. Ntinye 1 - ọnọdụ ọrụ
Nkọwa:	Oke a na-enye ohere ịhọrọ ụdị ntinye nke mbụ (IN1). Gbanwee ya dabere na ngwaọrụ ejikọrọ.
Ntọala dị:	0 - Ntinye oti mkpu na-emechi emechi (Ọmamọkwa) 1 - Ntinye oti mkpu na-emepe nke ọma (Ọmamọkwa) 2 - bọtịnụ Monostable (Ebe etiti) 3 - bọtịnụ Bistable (Ihe ngosi etiti) 4 - Ntinye Analog na-enweghị ndọpụta n'ime (Sensor Multilevel) 5 - Ntinye Analog na ntinye n'ime (Sensor Multilevel)
Ntọala izizi:	2 (bọtịnụ na-enweghị ike)			Oke nha:			1 [byte]
Oke:	21. Ntinye 2 - ọnọdụ ọrụ
Nkọwa:	Oke a na-enye ohere ịhọrọ ụdị ntinye nke abụọ (IN2). Gbanwee ya dabere na ngwaọrụ ejikọrọ.
Ntọala dị:	0 - Ntinye oti mkpu nke emechiri emechi (Ọma Ọmụma CC) 1 - Ntinye oti mkpu na-emepe nke ọma (Ọkwa CC) 2 - bọtịnụ Monostable (Central Scene CC) 3 - bọtịnụ Bistable (Central Scene CC) 4 - Ntinye Analog na-enweghị ndọpụta n'ime (Sensor Multilevel CC) 5 - Ntinye Analog na ntinye n'ime (Sensor Multilevel CC)
Ntọala izizi:	2 (bọtịnụ na-enweghị ike)			Oke nha:			1 [byte]
Oke:	24. Ntinye nghazi
Nkọwa:	Oke a na-enye ohere ịtụgharị ọrụ ntinye IN1 na IN2 na-agbanweghị wiring. Jiri ma ọ bụrụ na ejiri eriri na-ezighi ezi.
Ntọala dị:	0 - ndabara (ntinye IN1-1st, IN2-2nd ntinye) 1 - tụgharịa (ntinye IN1 - 2nd, IN2 - 1st)
Ntọala izizi:	0			Oke nha:			1 [byte]
Oke:	25. Mpụtara nghazi
Nkọwa:	Oke a na-enye ohere ịtụgharị ọrụ ntinye OUT1 na OUT2 na-agbanweghị wiring. Jiri ma ọ bụrụ na ị nwere eriri na-ezighi ezi.
Ntọala dị:	0 - ndabara (OUT1 - 1st mmepụta, OUT2 - 2nd mmepụta) 1 - tụgharịa (OUT1 - 2nd mmepụta, OUT2 - 1st mmepụta)
Ntọala izizi:	0			Oke nha:			1 [byte]
Oke:	40. Ntinye 1 - ihe nkiri zitere
Nkọwa:	Oke a na-akọwapụta omume na-ebute izipu NJ ọnọdụ yana njirimara ekenyere ha (lee 9: Na-arụ ọrụ). ihe nkiri). Parameter dị mkpa naanị ma ọ bụrụ na edobere oke 20 ka ọ bụrụ 2 ma ọ bụ 3.
Ntọala dị:	1 - Apịara igodo 1 oge 2 – Pịa igodo ugboro 2 4 – Pịa igodo ugboro 3 8 - Jide igodo wee wepụta igodo
Ntọala izizi:	0 (enweghị ihe nkiri ezitere)					Oke nha:		1 [byte]
Oke:	41. Ntinye 2 - ihe nkiri zitere
Nkọwa:	Oke a na-akọwapụta omume na-ebute izipu NJ ọnọdụ yana njirimara ekenyere ha (lee 9: Na-arụ ọrụ). ihe nkiri). Parameter dị mkpa naanị ma ọ bụrụ na edobere oke 21 ka ọ bụrụ 2 ma ọ bụ 3.
Ntọala dị:	1 - Apịara igodo 1 oge 2 – Pịa igodo ugboro 2 4 – Pịa igodo ugboro 3 8 - Jide igodo wee wepụta igodo
Ntọala izizi:	0 (enweghị ihe nkiri ezitere)					Oke nha:		1 [byte]
Oke:	47. Ntinye 1 - uru ezigara na otu mkpakọrịta nke abụọ mgbe arụ ọrụ
Nkọwa:	Oke a na-akọwa uru ezigara na ngwaọrụ na otu mkpakọrịta nke abụọ mgbe etinyere ntinye IN2 (iji Basic Klas Iwu). Parameter dị mkpa naanị ma ọ bụrụ na atọrọ paramita 20 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	0-255
Ntọala izizi:	255					Oke nha:		2 [bytes]
Oke:	49. Ntinye 1 - uru ezigara na otu mkpakọrịta nke abụọ mgbe agbanyụrụ ya
Nkọwa:	Oke a na-akọwa uru ezigara na ngwaọrụ dị na otu mkpakọrịta nke abụọ mgbe agbanyụrụ ntinye IN2 (iji Basic). Klas Iwu). Parameter dị mkpa naanị ma ọ bụrụ na atọrọ paramita 20 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	0-255
Ntọala izizi:	0					Oke nha:		2 [bytes]
Oke:	52. Ntinye 2 - uru ezigara na otu mkpakọrịta nke atọ mgbe arụ ọrụ
Nkọwa:	Oke a na-akọwa uru ezigara na ngwaọrụ dị na otu mkpakọrịta nke atọ mgbe etinyere ntinye IN3 (iji Basic Klas Iwu). Parameter dị mkpa naanị ma ọ bụrụ na atọrọ paramita 21 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	0-255
Ntọala izizi:	255					Oke nha:		2 [bytes]
Oke:	54. Ntinye 2 - uru ezigara na otu mkpakọrịta nke atọ mgbe ọ kwụsịrị
Nkọwa:	Oke a na-akọwa uru ezigara na ngwaọrụ na otu mkpakọrịta nke atọ mgbe etinyere IN3 (na-eji Basic). Klas Iwu). Parameter dị mkpa naanị ma ọ bụrụ na atọrọ paramita 21 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	0-255
Ntọala izizi:	10					Oke nha:		1 [byte]
Oke:	150. Ntinye 1 - uche
Nkọwa:	Oke a na-akọwapụta oge inertia nke ntinye IN1 na ụdị mkpu. Gbanwee oke a ka ọ ghara ịfegharị ma ọ bụ mgbagha mgbaama. Parameter dị mkpa naanị ma ọ bụrụ na atọrọ paramita 20 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	1-100 (10ms-1000ms, 10ms nzọụkwụ)
Ntọala izizi:	600 (nkeji 10)					Oke nha:		2 [bytes]
Oke:	151. Ntinye 2 - uche
Nkọwa:	Oke a na-akọwapụta oge inertia nke ntinye IN2 na ụdị mkpu. Gbanwee oke a ka ọ ghara ịfegharị ma ọ bụ mgbagha mgbaama. Parameter dị mkpa naanị ma ọ bụrụ na atọrọ paramita 21 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	1-100 (10ms-1000ms, 10ms nzọụkwụ)
Ntọala izizi:	10 (100ms)					Oke nha:		1 [byte]
Oke:	152. Ntinye 1 - igbu oge nke kagbuo mkpu
Nkọwa:	Oke a na-akọwapụta igbu oge ọzọ nke ịkagbu mkpu na ntinye IN1. Parameter dị mkpa naanị ma ọ bụrụ na edobere paramita 20 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	0 - enweghị oge 1-3600s
Ntọala izizi:	0 (anaghị egbu oge)					Oke nha:		2 [bytes]
Oke:	153. Ntinye 2 - igbu oge nke kagbuo mkpu
Nkọwa:	Oke a na-akọwapụta igbu oge ọzọ nke ịkagbu mkpu na ntinye IN2. Parameter dị mkpa naanị ma ọ bụrụ na edobere paramita 21 na 0 ma ọ bụ 1 (ụdị mkpu).
Ntọala dị:	0 - enweghị oge 0-3600s
Ntọala izizi:	0 (anaghị egbu oge)				Oke nha:		2 [bytes]
Oke:	154. Mmepụta 1 - mgbagha arụ ọrụ
Nkọwa:	Oke a na-akọwapụta mgbagha nke ọrụ mmepụta OUT1.
Ntọala dị:	0 - kọntaktị na-emeghe / mechie mgbe ọ na-arụ ọrụ 1 - kọntaktị na-emechi / mepee mgbe ọ na-arụ ọrụ
Ntọala izizi:	0 (Mba)				Oke nha:		1 [byte]
Oke:	155. Mmepụta 2 - mgbagha arụ ọrụ
Nkọwa:	Oke a na-akọwapụta mgbagha nke ọrụ mmepụta OUT2.
Ntọala dị:	0 - kọntaktị na-emeghe / mechie mgbe ọ na-arụ ọrụ 1 - kọntaktị na-emechi / mepee mgbe ọ na-arụ ọrụ
Ntọala izizi:	0 (Mba)				Oke nha:		1 [byte]
Oke:	156. Mpụta 1 - akpaaka kwụsịrị
Nkọwa:	Oke a na-akọwa oge mgbe OUT1 ga-agbanyụọ ozugbo.
Ntọala dị:	0 - gbanyụọ akpaaka 1-27000 (0.1s-45min, 0.1s nzọụkwụ)
Ntọala izizi:	0 (gbanyụrụ akpaghị aka)				Oke nha:		2 [bytes]
Oke:	157. Mpụta 2 - akpaaka kwụsịrị
Nkọwa:	Oke a na-akọwa oge mgbe OUT2 ga-agbanyụọ ozugbo.
Ntọala dị:	0 - gbanyụọ akpaaka 1-27000 (0.1s-45min, 0.1s nzọụkwụ)
Ntọala izizi:	0 (gbanyụrụ akpaghị aka)				Oke nha:		2 [bytes]
Oke:	63. Ntinye Analog - obere mgbanwe maka ịkọ akụkọ
Nkọwa:	Oke a na-akọwapụta ntakịrị mgbanwe (site na nke ikpeazụ kọrọ) nke uru ntinye analọgụ nke na-ebute izipu akụkọ ọhụrụ. Paramita dị mkpa naanị maka ntinye analọgụ (parameter 20 ma ọ bụ 21 ka edobere na 4 ma ọ bụ 5). Ịtọlite ​​uru dị oke elu nwere ike ịkpata enweghị izipu akụkọ.
Ntọala dị:	0 - agbanyụrụ mkpesa banyere mgbanwe 1-100 (0.1-10V, 0.1V nzọụkwụ)
Ntọala izizi:	5 (0.5V)				Oke nha:		1 [byte]
Oke:	64. Ntinye Analog - akụkọ oge
Nkọwa:	Oke a na-akọwa oge mkpesa nke uru ntinye analọgụ. Akụkọ nke oge na-adabere na mgbanwe na uru (parameter 63). Paramita dị mkpa naanị maka ntinye analọgụ (parameter 20 ma ọ bụ 21 ka edobere na 4 ma ọ bụ 5).
Ntọala dị:	0 - agbanyụrụ akụkọ kwa oge 30-32400 (30-32400s) - oge mkpesa
Ntọala izizi:	0 (agbanyụrụ akụkọ oge ọ bụla)				Oke nha:		2 [bytes]
Oke:	65. Ihe mmetụta okpomọkụ dị n'ime - obere mgbanwe na-akọ
Nkọwa:	Oke a na-akọwapụta ntakịrị mgbanwe (site na nke ikpeazụ a kọrọ) nke uru ihe mmetụta okpomọkụ dị n'ime nke na-ebute izipu akụkọ ọhụrụ.
Ntọala dị:	0 - agbanyụrụ mkpesa banyere mgbanwe 1-255 (0.1-25.5 Celsius)
Ntọala izizi:	5 (0.5°C)				Oke nha:		2 [bytes]
Oke:	66. Ihe mmetụta okpomọkụ dị n'ime - akụkọ oge
Nkọwa:	Oke a na-akọwa oge mkpesa nke uru ihe mmetụta okpomọkụ dị n'ime. Akụkọ oge ọ bụla nwere onwe site na mgbanwe na uru (parameter 65).
Ntọala dị:	0 - agbanyụrụ akụkọ oge 60-32400 (60s-9h)
Ntọala izizi:	0 (agbanyụrụ akụkọ oge ọ bụla)	Oke nha:	2 [bytes]
Oke:	67. Ihe mmetụta mpụga - obere mgbanwe maka ịkọ akụkọ
Nkọwa:	Oke a na-akọwapụta ntakịrị mgbanwe (site na nke ikpeazụ kọrọ) nke ụkpụrụ mmetụta mpụga (DS18B20 ma ọ bụ DHT22) nke na-ebute izipu akụkọ ọhụrụ. Parameter dị mkpa naanị maka sensọ DS18B20 ma ọ bụ DHT22 ejikọrọ.
Ntọala dị:	0 - agbanyụrụ mkpesa banyere mgbanwe 1-255 (0.1-25.5 nkeji, 0.1)
Ntọala izizi:	5 (0.5 nkeji)	Oke nha:	2 [bytes]
Oke:	68. Ihe mmetụta mpụga - akụkọ oge
Nkọwa:	Oke a na-akọwa oge mkpesa nke uru ntinye analọgụ. Akụkọ nke oge na-adabere na mgbanwe na uru (parameter 67). Parameter dị mkpa naanị maka sensọ DS18B20 ma ọ bụ DHT22 ejikọrọ.
Ntọala dị:	0 - agbanyụrụ akụkọ oge 60-32400 (60s-9h)
Ntọala izizi:	0 (agbanyụrụ akụkọ oge ọ bụla)	Oke nha:	2 [bytes]

Nkọwapụta nka nka

Ngwa Smart-Control bụ nke Nice SpA (TV) mepụtara. Ịdọ aka ná ntị: - Nkọwa teknụzụ niile ekwuru na ngalaba a na-ezo aka na ọnọdụ okpomọkụ nke 20 °C (± 5 °C) - Nice SpA nwere ikike itinye mgbanwe na ngwaahịa ahụ n'oge ọ bụla echere na ọ dị mkpa, ebe ọ na-ejigide otu ọrụ na ezubere iji.

Smart-njikwa
Ịnye ọkụ	9-30V DC ± 10%
Ntinye	2 0-10V ma ọ bụ ntinye dijitalụ. Ntinye 1 serial 1-waya
Nsonaazụ	Mpụta 2 na-enweghị ike
Ihe mmetụta dijitalụ akwadoro	6 DS18B20 ma ọ bụ 1 DHT22
Nke kachasị ugbu a na ntinye	150mA
Oke voltage na mmepụta	30V DC / 20V AC ± 5%
Oke ihe mmetụta okpomọkụ arụnyere n'ime ya	-55 Celsius C -126 Celsius
Ọnọdụ okpomọkụ na-arụ ọrụ	0-40 Celsius C
Akụkụ ( Ogologo x obosara x ịdị elu)	29 x 18 x 13 mm (1.14" x 0.71" x 0.51")

• Ugboro redio nke ngwaọrụ ọ bụla ga-abụrịrị otu ihe njikwa Z-Wave gị. Lelee ozi dị na igbe ma ọ bụ kpọtụrụ onye na-ere gị ma ọ bụrụ na ịmaghị.

Mgbanwe redio
Usoro redio	Z-Wave (500 usoro mgbawa)
Ugboro ugboro	868.4 ma ọ bụ 869.8 MHz EU 921.4 ma ọ bụ 919.8 MHz ANZ
Oke transceiver	ruo 50m n’èzí ruo 40m n’ime ụlọ (dabere na ala na nhazi ụlọ)
Oke. nyefee ike	Ọnụahịa kasị elu nke EIRP. 7dBm

(*) Ngwaọrụ ndị ọzọ na-arụ ọrụ n'otu oge na mgbasa ozi na-aga n'ihu na-emetụta oke transceiver, dị ka mkpu na ekweisi redio nke na-egbochi transceiver unit njikwa.

Mkpofu ngwaahịa

Ngwaahịa a bụ akụkụ dị mkpa nke akpaaka ya mere a ga-atụfu ya na nke ikpeazụ.
Dị ka ọ dị na nrụnye, nakwa na njedebe nke ndụ ngwaahịa, ndị ọrụ ruru eru ga-arụrịrị ọrụ mkposa na mkpochapụ. A na-eji ụdị ihe dị iche iche mee ngwaahịa a, ụfọdụ n'ime ha nwere ike ịmegharị ebe ndị ọzọ ga-ehichapụ. Chọọ ozi na sistemu mkpụgharị na mkpofu nke iwu mpaghara na mpaghara gị tụrụ anya maka udi ngwaahịa a. Kpachara anya! - akụkụ ụfọdụ nke ngwaahịa ahụ nwere ike ịnwe ihe ndị na-emerụ emerụ ma ọ bụ ihe ize ndụ nke, ọ bụrụ na etinye ya na gburugburu ebe obibi,
nwere ike imebi gburugburu ebe obibi ma ọ bụ ahụike anụ ahụ.
Dị ka akara n'akụkụ gosiri, a machibidoro ikpofu ngwaahịa a na mkpofu ụlọ. Kewaa ihe mkpofu ahụ n'ụdị maka mkpofu, dabere na usoro iwu dị ugbu a na mpaghara gị, ma ọ bụ weghachi ngwaahịa ahụ n'aka onye na-ere ahịa mgbe ịzụrụ ụdị ọhụrụ.
Kpachara anya! - Iwu mpaghara nwere ike ịtụpụta nnukwu ntaramahụhụ ma ọ bụrụ na ejiri mkpofu ngwaahịa a.

Nkwuwapụta nke ndabara

N'ebe a, Nice SpA, na-ekwupụta na ụdị akụrụngwa redio bụ Smart-Control dabara na ntuziaka 2014/53/EU.
Ederede n'uju nke nkwupụta nkwenye EU dị na adreesị ịntanetị a: http://www.niceforyou.com/en/support

Ọmarịcha SpA
Oderzo TV Italy
info@niceforyou.com
www.niceforyou.com
IS0846A00EN_15-03-2022

Akwụkwọ / akụrụngwa

Ọmarịcha Smart-Control Smart arụrụ arụrụ na ngwaọrụ Analog [pdf] Akwụkwọ ntuziaka Smart-Control Smart arụrụ ọrụ na ngwaọrụ Analog, Smart-Control, Smart Functionalities to Analog Devices, Ọrụ maka Ngwa Analog, Ngwa Analog, Ngwaọrụ

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ