Smart functionality rau analog khoom siv
Cov lus qhia thiab ceeb toom rau kev teeb tsa thiab siv

CEEB TOOM THIAB KEV TIV THAIV

• CEEB TOOM! - Phau ntawv no muaj cov lus qhia tseem ceeb thiab cov lus ceeb toom rau kev nyab xeeb ntawm tus kheej. Ua tib zoo nyeem txhua ntu ntawm phau ntawv no. Yog tias tsis ntseeg, ncua kev teeb tsa tam sim ntawd thiab hu rau Nice Technical Assistance.
• CEEB TOOM! - Cov lus qhia tseem ceeb: khaws phau ntawv no rau hauv qhov chaw muaj kev nyab xeeb kom muaj kev saib xyuas cov khoom thiab pov tseg yav tom ntej.
• CEEB TOOM! - Txhua qhov kev teeb tsa thiab kev sib txuas yuav tsum tau ua tshwj xeeb los ntawm cov neeg ua haujlwm tsim nyog thiab cov neeg txawj ntse nrog lub tsev txiav tawm ntawm lub zog hluav taws xob.
• CEEB TOOM! - Kev siv lwm yam tshaj li qhov tau teev tseg hauv no lossis hauv ib puag ncig ib puag ncig uas tsis yog cov uas tau teev tseg hauv phau ntawv no yuav raug suav tias yog qhov tsis raug thiab raug txwv nruj heev!
• Cov khoom ntim cov ntaub ntawv yuav tsum muab pov tseg kom ua raws li cov cai hauv zos.
• Tsis txhob siv cov kev hloov kho rau ib feem ntawm lub cuab yeej. Kev khiav hauj lwm tshaj li qhov tau teev tseg tsuas yog ua rau muaj kev ua haujlwm tsis zoo. Cov chaw tsim khoom tsis kam lees txhua qhov kev lav phib xaub rau kev puas tsuaj los ntawm kev hloov kho me ntsis rau cov khoom.
• Tsis txhob tso lub cuab yeej ze rau qhov chaw ntawm cov cua sov thiab tsis txhob tso cov nplaim liab qab. Cov kev ua no yuav ua rau cov khoom puas thiab ua rau
  tsis ua haujlwm.
• Cov khoom no tsis yog npaj rau kev siv los ntawm tib neeg (xws li menyuam yaus) uas muaj peev xwm txo qis lub cev, kev hnov ​​​​lus lossis lub hlwb lossis cov uas tsis muaj kev paub dhau los thiab kev paub, tshwj tsis yog lawv tau txais kev saib xyuas lossis kev qhia txog kev siv cov khoom los ntawm ib tus neeg ua haujlwm rau lawv txoj kev nyab xeeb.
• Cov cuab yeej yog powered nrog ib tug ruaj ntseg voltage. Txawm li cas los xij, tus neeg siv yuav tsum tau ceev faj lossis yuav tsum tau muab lub installation rau ib tus neeg tsim nyog.
• Txuas tsuas yog raws li ib qho ntawm cov duab qhia hauv phau ntawv. Kev sib txuas tsis raug yuav ua rau muaj kev pheej hmoo rau kev noj qab haus huv, lub neej lossis khoom puas tsuaj.
• Cov cuab yeej tsim los rau kev teeb tsa hauv phab ntsa hloov lub thawv ntawm qhov tob tsis tsawg dua 60mm. Lub thawv hloov thiab cov khoom siv hluav taws xob yuav tsum ua raws li cov qauv kev nyab xeeb hauv tebchaws.
• Tsis txhob tso cov khoom no rau cov dej noo, dej lossis lwm yam kua.
• Cov khoom no yog tsim los siv sab hauv tsev nkaus xwb. Tsis txhob siv sab nraud!
• Cov khoom no tsis yog khoom ua si. Cia kom deb ntawm menyuam yaus thiab tsiaj txhu!

KHOOM PLIG

Smart-Control tso cai rau txhim khu kev ua haujlwm ntawm cov xaim hluav taws xob thiab lwm yam khoom siv los ntawm kev ntxiv Z-Wave™ kev sib txuas lus network.
Koj tuaj yeem txuas binary sensors, analog sensors, DS18B20 kub sensors lossis DHT22 av noo thiab kub sensor los qhia lawv cov kev nyeem rau Z-Wave maub los. Nws tseem tuaj yeem tswj cov khoom siv los ntawm kev qhib / kaw cov ntaub ntawv tawm ntawm nws tus kheej ntawm cov khoom siv.
Cov yam ntxwv tseem ceeb

• Tso cai rau kev sib txuas sensors:
  » 6 DS18B20 sensors,
  » 1 DHT sensor,
  » 2 2-xaim analog sensor,
  » 2 3-xaim analog sensor,
  » 2 binary sensors.
• Built-in kub sensor.
• Txhawb Z-Wave™ network Security Hom: S0 nrog AES-128 encryption thiab S2 Authenticated nrog PRNG-raws li encryption.
• Ua haujlwm raws li Z-Wave teeb liab repeater (tag nrho cov khoom siv tsis siv roj teeb ua haujlwm hauv lub network yuav ua raws li cov neeg siv rov ua kom muaj kev ntseeg siab ntawm lub network).
• Tej zaum yuav siv tag nrho cov khoom siv tau ntawv pov thawj nrog Z-Wave Plus ™ ntawv pov thawj thiab yuav tsum tau sib haum nrog cov khoom siv ntawd tsim los ntawm lwm cov tuam ntxhab.

Smart-Control yog ib qho khoom siv tau zoo Z-Wave Plus™.
Cov cuab yeej no tuaj yeem siv nrog txhua yam khoom siv tau lees paub nrog daim ntawv pov thawj Z-Wave Plus thiab yuav tsum tau sib xws nrog cov khoom siv uas tsim los ntawm lwm cov tuam ntxhab. Tag nrho cov khoom siv tsis siv roj teeb ua haujlwm hauv lub network yuav ua raws li cov neeg siv rov ua kom muaj kev ntseeg siab ntawm lub network. Cov cuab yeej yog kev ruaj ntseg Enabled Z-Wave Plus cov khoom thiab ib qho kev ruaj ntseg Enabled Z-Wave Controller yuav tsum tau siv nyob rau hauv thiaj li yuav siv tag nrho cov khoom. Cov cuab yeej txhawb nqa Z-Wave network Kev Nyab Xeeb Hom: S0 nrog AES-128 encryption thiab S2
Authenticated nrog PRNG-raws li encryption.

INSTALLATION

Kev txuas lub cuab yeej ua ib yam tsis sib haum nrog phau ntawv no yuav ua rau muaj kev pheej hmoo rau kev noj qab haus huv, lub neej lossis khoom puas tsuaj.

• Txuas tsuas yog raws li ib qho ntawm cov duab kos,
• Cov cuab yeej siv nrog kev ruaj ntseg voltage; Txawm li cas los xij, tus neeg siv yuav tsum tau ceev faj ntxiv los yog yuav tsum muab lub installation rau ib tus neeg tsim nyog,
• Tsis txhob txuas cov khoom siv uas tsis ua raws li cov lus qhia tshwj xeeb,
• Tsis txhob txuas lwm yam sensors dua li DS18B20 lossis DHT22 rau SP thiab SD terminals,
• Tsis txhob txuas cov sensors rau SP thiab SD terminals nrog cov xov hlau ntev dua 3 meters,
• Tsis txhob thauj cov khoom tawm nrog qhov tam sim no tshaj 150mA,
• Txhua lub cuab yeej txuas nrog yuav tsum ua raws li cov qauv kev nyab xeeb,
• Cov kab tsis siv yuav tsum tau sab laug insulated.

Cov lus qhia rau kev teeb tsa lub kav hlau txais xov:

• Nrhiav tus kav hlau txais xov kom deb ntawm cov hlau ntau li ntau tau (txuas cov xov hlau, lub nplhaib bracket, thiab lwm yam) txhawm rau tiv thaiv kev cuam tshuam,
• Hlau qhov chaw nyob rau hauv ib ncig ntawm lub kav hlau txais xov ncaj qha (xws li dej ntws cov thawv hlau, hlau qhov rooj thav ntawv) tuaj yeem cuam tshuam cov teeb liab txais tos!
• Tsis txhob txiav los yog luv lub kav hlau txais xov - nws qhov ntev yog zoo kawg nkaus haum rau lub band uas lub kaw lus ua haujlwm.
• Xyuas kom tseeb tias tsis muaj ib feem ntawm tus kav hlau txais xov sticks tawm ntawm phab ntsa hloov lub thawv.

3.1 - Cov lus ceeb toom rau cov duab kos
ANT (dub) – kav hlau txais xov
GND (xiav) - av conductor
SD (dawb) - teeb liab tus neeg xyuas pib rau DS18B20 lossis DHT22 sensor
SP (xim av) - fais fab mov conductor rau DS18B20 lossis DHT22 sensor (3.3V)
IN2 (ntsuab) – input no. 2
IN1 (daj) – input no. 1
GND (xiav) - av conductor
P (liab) - fais fab mov conductor
OUT1 - tso zis tsis muaj. 1 muab mus rau cov tswv yim IN1
OUT2 - tso zis tsis muaj. 2 muab mus rau cov tswv yim IN2
B - khawm kev pabcuam (siv ntxiv / tshem tawm lub cuab yeej)

3.2 - Kev sib txuas nrog kab tswb

1. Tua lub tswb system.
2. Txuas nrog ib qho ntawm cov duab hauv qab no:
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Npaj cov cuab yeej thiab nws cov kav hlau txais xov hauv tsev.
5. Fais fab lub cuab yeej.
6. Ntxiv cov cuab yeej rau Z-Wave network.
7. Hloov cov nqi ntawm cov parameter:
   • Txuas rau IN1:
   » Nquag kaw: hloov parameter 20 rau 0
   » Nquag qhib: hloov parameter 20 rau 1
   • Txuas rau IN2:
   » Nquag kaw: hloov parameter 21 rau 0
   » Nquag qhib: hloov parameter 21 rau 1

3.3 - Kev sib txuas nrog DS18B20
Lub DS18B20 sensor yuav yooj yim ntsia tau rau txhua qhov chaw uas yuav tsum tau ntsuas qhov kub thiab txias. Yog tias ua raws li kev tiv thaiv kev tiv thaiv zoo, lub sensor yuav siv tau rau hauv qhov chaw ntub dej lossis hauv qab dej, nws tuaj yeem muab tso rau hauv pob zeb lossis tso rau hauv pem teb. Koj tuaj yeem txuas mus txog 6 DS18B20 sensors nyob rau hauv parallel rau SP-SD terminals.

1. Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.

3.4 - Kev sib txuas nrog DHT22
Lub DHT22 sensor tuaj yeem ntsia tau yooj yim nyob qhov twg qhov av noo thiab ntsuas kub xav tau.
Koj tuaj yeem txuas tsuas yog 1 DHT22 sensor rau TP-TD terminals.

1.  Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.

3.5 - Kev sib txuas nrog 2-xaim 0-10V sensor
Lub 2-xaim analog sensor yuav tsum rub-up resistor.
Koj tuaj yeem txuas mus txog 2 analog sensors rau IN1 / IN2 terminals.
Cov khoom siv 12V yuav tsum muaj rau cov hom sensors no.

1. Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.
6. Hloov cov nqi ntawm cov parameter:
   • Txuas nrog IN1: hloov parameter 20 mus rau 5
   • Txuas nrog IN2: hloov parameter 21 mus rau 5

3.6 - Kev sib txuas nrog 3-xaim 0-10V sensor
Koj tuaj yeem txuas mus txog 2 analog sensors IN1 / IN2 terminals.

1. Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.
6. Hloov cov nqi ntawm cov parameter:
   • Txuas nrog IN1: hloov parameter 20 mus rau 4
   • Txuas nrog IN2: hloov parameter 21 mus rau 4

3.7 - Kev sib txuas nrog binary sensor
Koj txuas ib txwm qhib lossis ib txwm binary sensors rau IN1 / IN2 terminals.

1. Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.
6. Hloov cov nqi ntawm cov parameter:
   • Txuas rau IN1:
   » Nquag kaw: hloov parameter 20 rau 0
   » Nquag qhib: hloov parameter 20 rau 1
   • Txuas rau IN2:
   » Nquag kaw: hloov parameter 21 rau 0
   » Nquag qhib: hloov parameter 21 rau 1

3.8 - Kev sib txuas nrog khawm
Koj tuaj yeem txuas monostable lossis bistable keyboards rau IN1 / IN2 terminals kom qhib qhov chaw.

1. Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3.  Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.
6. Hloov cov nqi ntawm cov parameter:

• Txuas rau IN1:
  » Monostable: hloov parameter 20 rau 2
  » Bistable: hloov parameter 20 rau 3
• Txuas rau IN2:
  » Monostable: hloov parameter 21 rau 2
  » Bistable: hloov parameter 21 rau 3

3.9 - Kev sib txuas nrog lub qhov rooj qhib
Smart-Control tuaj yeem txuas nrog cov khoom siv sib txawv los tswj lawv. Hauv no example nws txuas nrog lub qhov rooj qhib nrog impulse input (txhua qhov impulse yuav pib thiab nres lub rooj vag lub cev muaj zog, hloov pauv qhib / kaw)

1.  Disconnect hwj chim.
2. Txuas raws li daim duab ntawm sab xis.
3. Txheeb xyuas qhov tseeb ntawm kev sib txuas.
4. Fais fab lub cuab yeej.
5. Ntxiv cov cuab yeej rau Z-Wave network.
6. Hloov cov nqi ntawm cov parameter:

• Txuas rau IN1 thiab OUT1:
  » Hloov parameter 20 mus rau 2 (monostable khawm)
  » Hloov parameter 156 rau 1 (0.1s)
• Txuas rau IN2 thiab OUT2:
  » Hloov parameter 21 mus rau 2 (monostable khawm)
  » Hloov parameter 157 rau 1 (0.1s)

NTXIV LUB CHAW UA HAUJ LWM

• Tag Nrho DSK code tam sim no tsuas yog nyob rau ntawm lub thawv, nco ntsoov khaws nws lossis luam cov lej.
• Thaum muaj teeb meem nrog kev ntxiv cov khoom siv, thov rov qab kho lub ntaus ntawv thiab rov ua qhov txheej txheem ntxiv.

Ntxiv (Inclusion) - Z-Wave ntaus ntawv hom kev kawm, tso cai rau ntxiv cov cuab yeej rau Z-Wave network uas twb muaj lawm.

4.1 – Ntxiv manually
Txhawm rau ntxiv cov cuab yeej rau Z-Wave network manually:

1.  Fais fab lub cuab yeej.
2. Teem lub ntsiab tswj hwm rau hauv (Kev Ruaj Ntseg / tsis-Kev Ruaj Ntseg) ntxiv hom (saib phau ntawv tswj hwm).
3.  Ceev ceev, triple nyem khawm ntawm lub cuab yeej vaj tsev lossis hloov txuas nrog IN1 lossis IN2.
4. Yog tias koj ntxiv rau hauv Kev Ruaj Ntseg S2 Authenticated, luam theej duab DSK QR code lossis sau tus lej 5 tus lej PIN (daim ntawv lo rau hauv qab ntawm lub thawv).
5. LED yuav pib ntsais daj, tos kom muaj txheej txheem xaus.
6. Kev ua tiav ntxiv yuav raug lees paub los ntawm Z-Wave tus tswj hwm cov lus.

4.2 - Ntxiv siv SmartStart
SmartStart enabled cov khoom tuaj yeem muab ntxiv rau hauv Z-Wave network los ntawm kev luam theej duab Z-Wave QR Code tam sim no ntawm cov khoom nrog tus maub los muab SmartStart suav nrog. SmartStart cov khoom yuav raug ntxiv rau hauv 10 feeb ntawm kev hloov pauv hauv lub network.
Txhawm rau ntxiv cov cuab yeej rau Z-Wave network siv SmartStart:

1. Teeb tus maub los tseem ceeb hauv Kev Ruaj Ntseg S2 Authenticated ntxiv hom (saib tus maub los phau ntawv).
2. Luam theej duab DSK QR code lossis sau tus lej 5 tus lej PIN (daim ntawv lo rau hauv qab ntawm lub thawv).
3. Fais fab lub cuab yeej.
4. LED yuav pib ntsais daj, tos kom muaj txheej txheem xaus.
5. Kev ua tiav ntxiv yuav raug lees paub los ntawm Z-Wave maub los cov lus

ROV QHOV TSEEB

Tshem tawm (Exclusion) - Z-Wave ntaus ntawv hom kev kawm, tso cai tshem tawm cov cuab yeej ntawm Z-Wave network uas twb muaj lawm.
Txhawm rau tshem tawm cov cuab yeej ntawm Z-Wave network:

1.  Fais fab lub cuab yeej.
2. Teem lub ntsiab tswj rau hauv kev rho tawm hom (saib cov maub los ntawm phau ntawv).
3. Ceev ceev, triple nyem khawm ntawm lub cuab yeej vaj tsev lossis hloov txuas nrog IN1 lossis IN2.
4. LED yuav pib blinking daj, tos rau qhov kev tshem tawm tag mus.
5. Kev tshem tawm ua tiav yuav raug lees paub los ntawm Z-Wave maub los cov lus.

Nco tseg:

• Tshem tawm cov cuab yeej rov qab tag nrho cov kev tsis raug ntawm lub cuab yeej, tab sis tsis rov pib dua cov ntaub ntawv ntsuas hluav taws xob.
• Kev tshem tawm siv kev sib txuas nrog IN1 lossis IN2 tsuas yog ua haujlwm yog tias parameter 20 (IN1) lossis 21 (IN2) yog teem rau 2 lossis 3 thiab parameter 40 (IN1) lossis 41 (IN2) tsis tso cai xa cov scenes rau triple click.

Kev ua haujlwm ntawm lub cuab yeej

6.1 - Tswj cov zis
Nws muaj peev xwm tswj tau cov zis nrog cov inputs lossis nrog B-khawm:

• ib zaug nias – hloov OUT1 tso zis
• ob npaug nias – hloov OUT2 tso zis

6.2 – Visual indications
Teeb built-in LED qhia cov xwm txheej ntaus ntawv tam sim no.
Tom qab ua kom lub zog:

• Ntsuab - ntaus ntawv ntxiv rau Z-Wave network (tsis muaj kev ruaj ntseg S2 Authenticated)
• Magenta - ntaus ntawv ntxiv rau Z-Wave network (nrog Kev Ruaj Ntseg S2 Authenticated)
• Liab - ntaus ntawv tsis ntxiv rau Z-Wave network

Hloov tshiab:

• Blinking cyan – hloov tshiab nyob rau hauv kev kawm
• Ntsuab - hloov tshiab ua tiav (ntxiv yam tsis muaj Kev Ruaj Ntseg S2 Authenticated)
• Magenta - hloov tshiab ua tiav (ntxiv nrog Kev Ruaj Ntseg S2 Authenticated)
• Liab – hloov tshiab tsis ua tiav

Ntawv qhia zaub mov:

• 3 ntsuab blinks - nkag mus rau hauv cov ntawv qhia zaub mov (ntxiv yam tsis muaj kev ruaj ntseg S2 Authenticated)
• 3 magenta blinks - nkag mus rau hauv cov ntawv qhia zaub mov (ntxiv nrog Kev Ruaj Ntseg S2 Authenticated)
• 3 liab blinks - nkag mus rau hauv cov ntawv qhia zaub mov (tsis ntxiv rau Z-Wave network)
• Magenta - ntau yam kev xeem
• Yellow - rov pib dua

6.3 - Ntawv qhia zaub mov
Cov ntawv qhia zaub mov tso cai ua Z-Wave network ua. Txhawm rau siv cov ntawv qhia zaub mov:

1. Nias thiab tuav lub pob kom nkag mus rau hauv cov ntawv qhia zaub mov, ntaus ntawv blinks rau lub teeb liab ntxiv cov xwm txheej (saib 7.2 - Kev pom pom).
2. Tso lub khawm thaum ntaus ntawv teeb liab xav tau txoj hauj lwm nrog xim:
   • MAGENTA – pib xeem ntau yam
   • YELLOW – pib dua lub cuab yeej
3.  Ceev nrooj nyem lub pob kom paub meej tias.

6.4 - Rov pib dua rau lub Hoobkas ua ntej
Cov txheej txheem rov tso cai tso cai los kho cov cuab yeej rov qab rau nws lub Hoobkas chaw, uas txhais tau tias tag nrho cov ntaub ntawv hais txog Z-Wave tus maub los thiab tus neeg siv teeb tsa yuav raug muab lwv.
Nco tseg. Rov pib dua lub cuab yeej tsis yog txoj kev pom zoo ntawm kev tshem tawm cov cuab yeej ntawm Z-Wave network. Siv cov txheej txheem rov pib dua tsuas yog tias tus maub los rimary ploj lawm lossis ua haujlwm tsis tau. Qee qhov kev tshem tawm cov cuab yeej tuaj yeem ua tiav los ntawm cov txheej txheem ntawm kev tshem tawm tau piav qhia.

1. Nias thiab tuav lub pob kom nkag mus rau cov ntawv qhia zaub mov.
2. Tso khawm thaum lub cuab yeej ci daj.
3. Ceev nrooj nyem lub pob kom paub meej tias.
4. Tom qab ob peb lub vib nas this, lub cuab yeej yuav rov pib dua, uas tau teeb liab nrog cov xim liab.

Z-WAVE RANGE TEST

Cov cuab yeej muaj ib tug ua nyob rau hauv Z-Wave network main controller's range tester.

• Txhawm rau ua kom Z-Wave ntau qhov ntsuas tau, cov cuab yeej yuav tsum tau ntxiv rau Z-Wave maub los. Kev ntsuam xyuas tuaj yeem ntxhov siab rau lub network, yog li nws raug pom zoo kom ua qhov kev sim tsuas yog tshwj xeeb.

Txhawm rau kuaj lub ntsiab tswj qhov ntau:

1. Nias thiab tuav lub pob kom nkag mus rau cov ntawv qhia zaub mov.
2.  Tso khawm thaum lub cuab yeej glows magenta.
3. Ceev nrooj nyem lub pob kom paub meej tias.
4. Qhov taw qhia pom yuav qhia txog Z-Wave network qhov ntau yam (ntau hom kev taw qhia tau piav qhia hauv qab no).
5. Txhawm rau tawm Z-Wave ntau yam kev xeem, nias lub pob luv luv.

Z-Wave range tester signaling hom:

• Qhov taw qhia pom pom pom ntsuab - lub cuab yeej sim tsim kev sib txuas lus ncaj qha nrog tus tswj hwm lub ntsiab. Yog tias qhov kev sim sib txuas lus ncaj qha tsis ua tiav, lub cuab yeej yuav sim tsim kev sib txuas lus, los ntawm lwm cov qauv, uas yuav raug teeb liab los ntawm qhov pom qhov taw qhia pom daj.
• Qhov taw qhia pom qhov ci ntsuab - lub cuab yeej sib txuas lus nrog lub ntsiab tswj ncaj qha.
• Qhov taw qhia pom pom daj daj - lub cuab yeej sim tsim kom muaj kev sib txuas lus nrog lub ntsiab tswj los ntawm lwm cov modules (repeaters).
• Qhov taw qhia pom lub ntsej muag daj - lub cuab yeej sib txuas lus nrog lub ntsiab tswj los ntawm lwm cov modules. Tom qab 2 vib nas this, lub cuab yeej yuav rov ua dua los tsim kev sib txuas lus ncaj qha nrog tus tswj hwm lub ntsiab, uas yuav raug teeb liab nrog qhov taw qhia pom pom pom ntsuab.
• Qhov taw qhia pom pom pom violet - lub cuab yeej sib txuas lus ntawm qhov siab tshaj plaws ntawm Z-Wave network. Yog tias kev sib txuas ua pov thawj tiav nws yuav raug lees paub nrog lub ntsej muag daj. Nws tsis pom zoo kom siv lub cuab yeej ntawm qhov txwv ntau.
• Qhov taw qhia pom qhov ci liab - lub cuab yeej tsis tuaj yeem txuas mus rau lub ntsiab tswj ncaj qha lossis los ntawm lwm lub Z-Wave network ntaus ntawv (repeater).

Nco tseg. Hom kev sib txuas lus ntawm lub cuab yeej tuaj yeem hloov pauv ntawm kev ncaj qha thiab ib qho uas siv txoj kev, tshwj xeeb tshaj yog tias lub cuab yeej nyob ntawm qhov txwv ntawm qhov ncaj qha.

ACTIVATING SCENES

Lub cuab yeej tuaj yeem qhib qhov xwm txheej hauv Z-Wave maub los los ntawm kev xa qhov chaw ID thiab tus cwj pwm ntawm kev ua tshwj xeeb siv Central Scene Command Class.
Txhawm rau kom qhov kev ua haujlwm no ua haujlwm txuas monostable lossis bistable hloov mus rau IN1 lossis IN2 cov tswv yim thiab teeb tsa qhov ntsuas 20 (IN1) lossis 21 (IN2) rau 2 lossis 3.
Los ntawm lub neej ntawd scenes tsis tau qhib, teem tsis pub dhau 40 thiab 41 kom pab kom scene ua kom tau xaiv.

Table A1 - Kev ua kom qhib qhov chaw
Hloov	Kev ua	Daim duab ID	Yam ntxwv
Hloov txuas nrog IN1 davhlau ya nyob twg	Hloov nyem ib zaug	1	Nyem 1 zaug
	Hloov nias ob zaug	1	Nyem 2 zaug
	Hloov clicked peb *	1	Nyem 3 zaug
	Hloov tuav **	1	Yuam Sij Los Txog Cia
	Hloov tso tawm **	1	Tseem Ceeb Tso Tawm
Hloov txuas nrog IN2 davhlau ya nyob twg	Hloov nyem ib zaug	2	Nyem 1 zaug
	Hloov nias ob zaug	2	Nyem 2 zaug
	Hloov clicked peb *	2	Nyem 3 zaug
	Hloov tuav **	2	Yuam Sij Los Txog Cia
	Hloov tso tawm **	2	Tseem Ceeb Tso Tawm

* Ua kom muaj peb zaug clicks yuav tsis tso cai tshem tawm siv lub davhlau ya nyob twg input.
** Tsis muaj rau toggle keyboards.

ASSOCIATIONS

Kev koom tes (txuas cov khoom siv) - kev tswj ncaj qha ntawm lwm yam khoom siv hauv Z-Wave system network xws li Dimmer, Relay Hloov, Cov Menyuam Shutter lossis scene (tej zaum yuav tswj tau los ntawm Z-Wave maub los). Lub koom haum ua kom muaj kev hloov pauv ncaj qha ntawm kev tswj cov lus txib ntawm cov khoom siv, yog ua yam tsis muaj kev koom tes ntawm tus tswj hwm lub ntsiab thiab yuav tsum muaj cov cuab yeej cuam tshuam rau hauv qhov ncaj qha.
Cov cuab yeej muab kev koom tes ntawm 3 pab pawg:
1 pawg koom haum - "Lifeline" qhia txog cov xwm txheej ntawm cov cuab yeej thiab tso cai rau kev tso cai rau ib qho khoom siv nkaus xwb (tus tswj hwm tseem ceeb los ntawm lub neej ntawd).
Pab pawg thib 2 - "On/Off (IN1)" raug xa mus rau IN1 input davhlau ya nyob twg (siv Basic command class).
Pab pawg thib 3 - "On/Off (IN2)" raug xa mus rau IN2 input davhlau ya nyob twg (siv Basic command class).
Cov cuab yeej hauv pab pawg thib 2 thiab thib 3 tso cai rau tswj 5 cov khoom siv tsis tu ncua lossis ntau cov khoom siv hauv ib pawg koom haum, tshwj tsis yog "LifeLine" uas tau tshwj tseg rau tus tswj hwm nkaus xwb thiab yog li tsuas yog 1 node tuaj yeem raug xa mus.

Z-WAVE SPECIFICATION

Table A2 – Txhawb Cov Lus Qhia
	Lus txib	Version		ruaj ntseg
1.	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]	V2
2.	COMMAND_CLASS_SWITCH_BINARY [0x25]	V1		YOG
3.	COMMAND_CLASS_ASSOCIATION [0x85]	V2		YOG
4.	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]	V3		YOG
5.	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]	V2		YOG
6.	COMMAND_CLASS_TRANSPORT_SERVICE [0x55]	V2
7.	COMMAND_CLASS_VERSION [0x86]	V2		YOG
8.	COMMAND_CLASS_MANUFACTURER_SPECIFIC [0x72]	V2		YOG
9.	COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A]	V1		YOG
10.	COMMAND_CLASS_POWERLEVEL [0x73]	V1		YOG
11.	COMMAND_CLASS_SECURITY [0x98]	V1
12.	COMMAND_CLASS_SECURITY_2 [0x9F]	V1
13.	COMMAND_CLASS_CENTRAL_SCENE [0x5B]		V3	YOG
14.	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]		v 11	YOG
15.	COMMAND_CLASS_MULTI_CHANNEL [0x60]		V4	YOG
16.	COMMAND_CLASS_CONFIGURATION [0x70]		V1	YOG
17.	COMMAND_CLASS_CRC_16_ENCAP [0x56]		V1
18.	COMMAND_CLASS_NOTIFICATION [0x71]		V8	YOG
19.	COMMAND_CLASS_PROTECTION [0x75]		V2	YOG
20.	COMMAND_CLASS_FIRMWARE_UPDATE_MD [0x7A]		V4	YOG
21.	COMMAND_CLASS_SUPERVISION [0x6C]		V1
22.	COMMAND_CLASS_APPLICATION_STATUS [0x22]		V1
23.	COMMAND_CLASS_BASIC [0x20]		V1	YOG

Table A3 – Multichannel Command Class
MULTICHANNEL CC
ROOT (Endpoint 1)
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_NOTIFICATION
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_NOTIFICATION_SENSOR
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Tswv yim 1 – Ceeb toom
Qhov kawg 2
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_NOTIFICATION
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_NOTIFICATION_SENSOR
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Tswv yim 2 – Ceeb toom

Qhov kawg 3
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_MULTILEVEL
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Analog tswv yim 1 - Voltage Qib
Qhov kawg 4
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_MULTILEVEL
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Analog tswv yim 2 - Voltage Qib
Qhov kawg 5
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SWITCH_BINARY
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_POWER_SWITCH_BINARY
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_SWITCH_BINARY [0x25]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_PROTECTION [0x75]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Rau cov zis 1

Qhov kawg 6
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SWITCH_BINARY
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_POWER_SWITCH_BINARY
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_SWITCH_BINARY [0x25]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_PROTECTION [0x75]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Rau cov zis 2
Qhov kawg 7
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_MULTILEVEL
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Kub-sab hauv sensor
Endpoint 8-13 (thaum DS18S20 sensors txuas)
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_MULTILEVEL
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Kub - sab nraud sensor DS18B20 Tsis muaj 1-6

Endpoint 8 (thaum DHT22 sensor txuas)
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_MULTILEVEL
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
Cov Chav Kawm	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Kub - sab nraud sensor DHT22
Endpoint 9 (thaum DHT22 sensor txuas)
Chav kawm dav dav ntawm Cov Ntaus	GENERIC_TYPE_SENSOR_MULTILEVEL
Cov cuab yeej tshwj xeeb	SPECIFIC_TYPE_ROUTING_SENSOR_MULTILEVEL
	COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
	COMMAND_CLASS_ASSOCIATION [0x85]
	COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
	COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
	COMMAND_CLASS_NOTIFICATION [0x71]
	COMMAND_CLASS_SENSOR_MULTILEVEL [0x31]
	COMMAND_CLASS_SUPERVISION [0x6C]
	COMMAND_CLASS_APPLICATION_STATUS [0x22]
	COMMAND_CLASS_SECURITY [0x98]
	COMMAND_CLASS_SECURITY_2 [0x9F]
Kev piav qhia	Humidity - Sab nraud sensor DHT22

Cov cuab yeej siv Daim Ntawv Ceeb Toom Chav Kawm kom tshaj tawm cov xwm txheej sib txawv rau tus tswj hwm ("Lifeline" pawg):

Table A4 – Ceeb Toom Command Class
ROOT (Endpoint 1)
Kev ceeb toom hom	Kev tshwm sim
Tsev Security [0x07]	Kev nkag mus tsis paub qhov chaw [0x02]
Qhov kawg 2
Kev ceeb toom hom	Kev tshwm sim
Tsev Security [0x07]	Kev nkag mus tsis paub qhov chaw [0x02]
Qhov kawg 7
Kev ceeb toom hom	Kev tshwm sim	Event/State Param- eter
System [0x09]	Kev kho vajtse tsis ua haujlwm nrog cov tuam txhab tsim khoom tsis ua haujlwm code [0x03]	Cov cuab yeej overheat [0x03]
Endpoint 8-13
Kev ceeb toom hom	Kev tshwm sim
System [0x09]	Qhov system hardware tsis ua haujlwm [0x01]

Protection Command Class tso cai rau kev tiv thaiv hauv zos lossis chaw taws teeb tswj ntawm cov khoom tawm.

Table A5 - Kev Tiv Thaiv CC:
Hom	Xeev	Kev piav qhia	Lus qhia
Hauv zos	0	Kev Tiv Thaiv Tsis Tau - Cov cuab yeej tsis raug tiv thaiv, thiab yuav ua haujlwm ib txwm dhau ntawm tus neeg siv interface.	Inputs txuas nrog outputs.
Hauv zos	2	Tsis muaj kev ua haujlwm tau - lub xeev ntawm cov zis tsis tuaj yeem hloov pauv los ntawm B-khawm lossis cov khoom siv sib txuas	Inputs disconnected los ntawm outputs.
RF	0	Tsis muaj kev tiv thaiv - Lub cuab yeej txais thiab teb rau tag nrho RF Commands.	Cov zis tuaj yeem tswj tau ntawm Z-Wave.
RF	1	Tsis muaj RF tswj - hais kom ua chav kawm theem pib thiab hloov binary raug tsis lees paub, txhua lwm chav kawm yuav raug daws	Cov zis tsis tuaj yeem tswj tau ntawm Z-Wave.

Table A6 – Assocation group maping
Hauv paus	Endpoint	Koom haum pab pawg hauv qhov kawg
Koom Haum Pab Pawg 2	Qhov kawg 1	Koom Haum Pab Pawg 2
Koom Haum Pab Pawg 3	Qhov kawg 2	Koom Haum Pab Pawg 2

Table A7 – Basic commands mapping
txib	Hauv paus	Cov Kawg
		1-2 : kuv	3-4 : kuv	5-6 : kuv	7-13 : kuv
Basic Set	= EP1	Daim ntawv thov raug tso tseg	Daim ntawv thov raug tso tseg	Hloov Binary Teeb	Daim ntawv thov raug tso tseg
Basic Tau	= EP1	Ceeb Toom Tau	Sensor Multi-level Tau	Hloov Binary Tau	Sensor Multi-level Tau
Daim Ntawv Qhia Yooj Yim	= EP1	Kev ceeb toom Qhia	Sensor Multi-level Report	Hloov binary Report	Sensor Multi-level Report

Table A8 – Lwm yam Command Class maps
Lus txib	Root mapped rau
Multilevel Sensor ntau	Qhov kawg 7
Binary Hloov	Qhov kawg 5
Kev tiv thaiv	Qhov kawg 5

ADVANCED PARAMETERS

Cov cuab yeej tso cai hloov kho nws txoj kev ua haujlwm rau cov neeg siv cov kev xav tau siv siv tsis dhau.
Lub chaw tuaj yeem hloov kho ntawm Z-Wave tus maub los uas lub tshuab txuas ntxiv. Txoj kev ntawm kev kho lawv tej zaum yuav txawv nyob ntawm tus maub los.
Ntau yam ntawm cov tsis muaj feem cuam tshuam tsuas yog rau cov tswv yim kev ua haujlwm tshwj xeeb (tsis muaj 20 thiab 21), sab laj cov lus hauv qab no:

Table A9 – Parameter dependency – Parameter 20
Parameter 20	ib 40	ib 47	ib 49	ib 150	ib 152	ib 63	ib 64
0 los yog 1		✓	✓	✓	✓
2 los yog 3	✓					✓	✓
4 los yog 5						✓	✓

Table A10 – Parameter dependency – Parameter 21
Parameter 21	ib 41	ib 52	ib 54	ib 151	ib 153	ib 63	ib 64
0 los yog 1		✓	✓	✓	✓
2 los yog 3	✓
4 los yog 5						✓	✓

Table A11 – Smart-Control – Muaj tsis muaj
Parameter:	20. Cov tswv yim 1 - hom kev ua haujlwm
Nqe lus piav qhia:	Qhov kev ntsuas no tso cai rau xaiv hom 1st input (IN1). Hloov nws nyob ntawm cov khoom siv txuas nrog.
Muaj chaw:	0 - Nquag kaw lub tswb tawm tswv yim (Kev Ceeb Toom) 1 - Nquag qhib lub tswb tawm tswv yim (Kev Ceeb Toom) 2 - khawm Monostable (Central Scene) 3 – Bistable khawm (Central Scene) 4 - Analog input yam tsis muaj kev rub tawm sab hauv (Sensor Multilevel) 5 - Analog input nrog sab hauv rub-up (Sensor Multilevel)
Default setting:	2 (monostable khawm)			Parameter loj:			1 [byte]
Parameter:	21. Cov tswv yim 2 - hom kev ua haujlwm
Nqe lus piav qhia:	Qhov parameter no tso cai rau xaiv hom 2nd input (IN2). Hloov nws nyob ntawm cov khoom siv txuas nrog.
Muaj chaw:	0 - Nquag kaw lub tswb tawm tswv yim (Kev Ceeb Toom CC) 1 - Nquag qhib lub tswb tawm tswv yim (Kev Ceeb Toom CC) 2 - khawm Monostable (Central Scene CC) 3 - Bistable khawm (Central Scene CC) 4 - Analog input yam tsis muaj kev rub tawm sab hauv (Sensor Multilevel CC) 5 - Analog input nrog sab hauv rub-up (Sensor Multilevel CC)
Default setting:	2 (monostable khawm)			Parameter loj:			1 [byte]
Parameter:	24. Inputs taw qhia
Nqe lus piav qhia:	Qhov kev ntsuas no tso cai rau thim rov qab ua haujlwm ntawm IN1 thiab IN2 inputs yam tsis hloov cov xaim. Siv nyob rau hauv rooj plaub uas tsis raug xaim.
Muaj chaw:	0 - default (IN1 - 1st input, IN2 - 2nd input) 1 - thim rov qab (IN1 - 2nd input, IN2 - 1st input)
Default setting:	0			Parameter loj:			1 [byte]
Parameter:	25. Outputs orientation
Nqe lus piav qhia:	Qhov kev ntsuas no tso cai rau kev thim rov qab ntawm OUT1 thiab OUT2 inputs yam tsis hloov cov xaim. Siv nyob rau hauv cov ntaub ntawv tsis raug.
Muaj chaw:	0 – default (OUT1 – 1st output, OUT2 – 2nd output) 1 - thim rov qab (OUT1 - 2nd tso zis, OUT2 - 1st tso zis)
Default setting:	0			Parameter loj:			1 [byte]
Parameter:	40. Tswv yim 1 – xa scenes
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tias qhov kev ua twg ua rau xa qhov chaw ID thiab tus cwj pwm muab rau lawv (saib 9: Ua kom muaj zog scenes). Parameter muaj feem cuam tshuam tsuas yog parameter 20 yog teem rau 2 lossis 3.
Muaj chaw:	1 – Ntsiab nias 1 zaug 2 – Ntsiab nias 2 zaug 4 - Ntsiab nias 3 zaug 8 - Tus yuam sij tuav cia thiab qhov tseem ceeb tso tawm
Default setting:	0 (tsis muaj scenes xa)					Parameter loj:		1 [byte]
Parameter:	41. Tswv yim 2 – xa scenes
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tias qhov kev ua twg ua rau xa qhov chaw ID thiab tus cwj pwm muab rau lawv (saib 9: Ua kom muaj zog scenes). Parameter muaj feem cuam tshuam tsuas yog parameter 21 yog teem rau 2 lossis 3.
Muaj chaw:	1 – Ntsiab nias 1 zaug 2 – Ntsiab nias 2 zaug 4 - Ntsiab nias 3 zaug 8 - Tus yuam sij tuav cia thiab qhov tseem ceeb tso tawm
Default setting:	0 (tsis muaj scenes xa)					Parameter loj:		1 [byte]
Parameter:	47. Cov tswv yim 1 – tus nqi xa mus rau pawg koom haum thib 2 thaum qhib
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau hais tias tus nqi xa mus rau cov khoom siv hauv 2nd koom nrog pab pawg thaum IN1 cov tswv yim tshwm sim (siv Basic Command Class). Parameter muaj feem cuam tshuam tsuas yog parameter 20 yog teem rau 0 lossis 1 (alarm hom).
Muaj chaw:	0-255 : kuv
Default setting:	255					Parameter loj:		2 [bytes]
Parameter:	49. Input 1 – tus nqi xa mus rau 2nd koom haum pab pawg thaum deactivated
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tias tus nqi xa mus rau cov khoom siv hauv 2nd koom nrog pab pawg thaum IN1 input yog deactivated (siv Basic Command Class). Parameter muaj feem cuam tshuam tsuas yog parameter 20 yog teem rau 0 lossis 1 (alarm hom).
Muaj chaw:	0-255 : kuv
Default setting:	0					Parameter loj:		2 [bytes]
Parameter:	52. Cov tswv yim 2 – tus nqi xa mus rau pawg 3rd koom haum thaum qhib
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tus nqi xa mus rau cov khoom siv hauv pawg 3rd koom haum thaum IN2 cov tswv yim tshwm sim (siv Basic Command Class). Parameter muaj feem cuam tshuam tsuas yog parameter 21 yog teem rau 0 lossis 1 (alarm hom).
Muaj chaw:	0-255 : kuv
Default setting:	255					Parameter loj:		2 [bytes]
Parameter:	54. Cov tswv yim 2 – tus nqi xa mus rau 3rd koom haum pab pawg thaum deactivated
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tias tus nqi xa mus rau cov khoom siv hauv 3rd koom haum pab pawg thaum IN2 input yog deactivated (siv Basic Command Class). Parameter muaj feem cuam tshuam tsuas yog parameter 21 yog teem rau 0 lossis 1 (alarm hom).
Muaj chaw:	0-255 : kuv
Default setting:	10					Parameter loj:		1 [byte]
Parameter:	150. Tswv yim 1 – rhiab heev
Nqe lus piav qhia:	Qhov no parameter txhais lub sij hawm inertia ntawm IN1 input nyob rau hauv lub tswb hom. Kho qhov ntsuas no txhawm rau tiv thaiv bouncing lossis teeb liab cuam tshuam. Parameter muaj feem cuam tshuam tsuas yog parameter 20 yog teem rau 0 lossis 1 (alarm hom).
Muaj chaw:	1-100 (10ms-1000ms, 10ms kauj ruam)
Default setting:	600 (10 feeb)					Parameter loj:		2 [bytes]
Parameter:	151. Tswv yim 2 – rhiab heev
Nqe lus piav qhia:	Qhov no parameter txhais lub sij hawm inertia ntawm IN2 input nyob rau hauv lub tswb hom. Kho qhov ntsuas no txhawm rau tiv thaiv bouncing lossis teeb liab cuam tshuam. Parameter muaj feem cuam tshuam tsuas yog parameter 21 yog teem rau 0 lossis 1 (alarm hom).
Muaj chaw:	1-100 (10ms-1000ms, 10ms kauj ruam)
Default setting:	10 (100ms)					Parameter loj:		1 [byte]
Parameter:	152. Input 1 – ncua lub tswb ceeb toom
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tias ncua sijhawm ntxiv ntawm kev tshem tawm lub tswb ntawm IN1 cov tswv yim. Parameter muaj feem cuam tshuam tsuas yog parameter 20 yog teem rau 0 lossis 1 (alarm mode).
Muaj chaw:	0 - tsis muaj ncua 1-3600 s., kuv
Default setting:	0 (tsis muaj ncua)					Parameter loj:		2 [bytes]
Parameter:	153. Input 2 – ncua lub tswb ceeb toom
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau tias ncua sijhawm ntxiv ntawm kev tshem tawm lub tswb ntawm IN2 cov tswv yim. Parameter muaj feem cuam tshuam tsuas yog parameter 21 yog teem rau 0 lossis 1 (alarm mode).
Muaj chaw:	0 - tsis muaj ncua 0-3600 s., kuv
Default setting:	0 (tsis muaj ncua)				Parameter loj:		2 [bytes]
Parameter:	154. Tso zis 1 - logic ntawm kev ua haujlwm
Nqe lus piav qhia:	Qhov kev ntsuas no txhais cov ntsiab lus ntawm OUT1 tso zis ua haujlwm.
Muaj chaw:	0 - kev sib cuag ib txwm qhib / kaw thaum ua haujlwm 1 - kev sib cuag ib txwm raug kaw / qhib thaum ua haujlwm
Default setting:	0 (tsis muaj)				Parameter loj:		1 [byte]
Parameter:	155. Tso zis 2 - logic ntawm kev ua haujlwm
Nqe lus piav qhia:	Qhov kev ntsuas no txhais cov ntsiab lus ntawm OUT2 tso zis ua haujlwm.
Muaj chaw:	0 - kev sib cuag ib txwm qhib / kaw thaum ua haujlwm 1 - kev sib cuag ib txwm raug kaw / qhib thaum ua haujlwm
Default setting:	0 (tsis muaj)				Parameter loj:		1 [byte]
Parameter:	156. Tso zis 1 – auto off
Nqe lus piav qhia:	Qhov kev ntsuas no txhais lub sijhawm tom qab uas OUT1 yuav raug txiav tawm.
Muaj chaw:	0 - auto off disabled 1-27000 (0.1s-45min, 0.1s kauj ruam)
Default setting:	0 (Auto Off Disabled)				Parameter loj:		2 [bytes]
Parameter:	157. Tso zis 2 – auto off
Nqe lus piav qhia:	Qhov kev ntsuas no txhais lub sijhawm tom qab uas OUT2 yuav raug txiav tawm.
Muaj chaw:	0 - auto off disabled 1-27000 (0.1s-45min, 0.1s kauj ruam)
Default setting:	0 (Auto Off Disabled)				Parameter loj:		2 [bytes]
Parameter:	63. Analog inputs – hloov me ntsis rau qhia
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau qhov kev hloov pauv tsawg (los ntawm qhov kawg tshaj tawm) ntawm tus nqi analog input uas ua rau xa daim ntawv tshaj tawm tshiab. Parameter tsuas yog cuam tshuam rau cov khoom siv analog (parameter 20 lossis 21 teem rau 4 lossis 5). Kev teeb tsa tus nqi siab dhau yuav ua rau tsis muaj ntawv ceeb toom xa mus.
Muaj chaw:	0 – qhia txog kev hloov tsis tau 1-100 (0.1-10V, 0.1V kauj ruam)
Default setting:	5 hli (0.5V)				Parameter loj:		1 [byte]
Parameter:	64. Analog inputs – cov lus ceeb toom raws sij hawm
Nqe lus piav qhia:	Qhov no parameter txhais lub sij hawm qhia txog tus nqi analog inputs. Cov ntawv ceeb toom ib ntus yog ywj siab los ntawm kev hloov pauv hauv tus nqi (parameter 63). Parameter tsuas yog cuam tshuam rau cov khoom siv analog (parameter 20 lossis 21 teem rau 4 lossis 5).
Muaj chaw:	0 - Cov ntawv ceeb toom ib ntus raug kaw 30-32400 (30-32400s) – qhia ncua sij hawm
Default setting:	0 (cov ntawv ceeb toom ib ntus tsis ua haujlwm)				Parameter loj:		2 [bytes]
Parameter:	65. Internal kub sensor – hloov me ntsis rau qhia
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau qhov kev hloov pauv tsawg kawg (los ntawm qhov kawg tshaj tawm) ntawm qhov ntsuas kub ntawm qhov ntsuas kub sab hauv uas ua rau xa tsab ntawv ceeb toom tshiab.
Muaj chaw:	0 – qhia txog kev hloov tsis tau 1-255 (0.1-25.5 ° C)
Default setting:	5 (0.5 ° C)				Parameter loj:		2 [bytes]
Parameter:	66. Internal kub sensor – raws sij hawm qhia
Nqe lus piav qhia:	Qhov no parameter txhais lub sij hawm qhia txog qhov kub thiab txias sensor tus nqi. Cov ntawv ceeb toom ib ntus yog ywj siab los ntawm kev hloov pauv ntawm tus nqi (parameter 65).
Muaj chaw:	0 - Cov ntawv ceeb toom tsis siv sijhawm 60-32400 (60s-9 teev)
Default setting:	0 (cov ntawv ceeb toom ib ntus tsis ua haujlwm)	Parameter loj:	2 [bytes]
Parameter:	67. Sab nraud sensors – hloov me ntsis rau qhia
Nqe lus piav qhia:	Qhov kev ntsuas no txhais tau qhov kev hloov pauv tsawg (los ntawm qhov kawg tshaj tawm) ntawm cov khoom siv sab nraud (DS18B20 lossis DHT22) uas ua rau xa tsab ntawv ceeb toom tshiab. Parameter tsuas yog cuam tshuam rau kev sib txuas DS18B20 lossis DHT22 sensors.
Muaj chaw:	0 – qhia txog kev hloov tsis tau 1-255 (0.1-25.5 units, 0.1)
Default setting:	5 (0.5 units)	Parameter loj:	2 [bytes]
Parameter:	68. Sab nraud sensors - cov lus ceeb toom raws sij hawm
Nqe lus piav qhia:	Qhov no parameter txhais lub sij hawm qhia txog tus nqi analog inputs. Cov ntawv ceeb toom ib ntus yog ywj siab los ntawm kev hloov pauv hauv tus nqi (parameter 67). Parameter tsuas yog cuam tshuam rau kev sib txuas DS18B20 lossis DHT22 sensors.
Muaj chaw:	0 - Cov ntawv ceeb toom tsis siv sijhawm 60-32400 (60s-9 teev)
Default setting:	0 (cov ntawv ceeb toom ib ntus tsis ua haujlwm)	Parameter loj:	2 [bytes]

TECHNICAL SPECIFICATIONS

Cov khoom Smart-Control yog tsim los ntawm Nice SpA (TV). Lus Ceeb Toom: - Tag nrho cov kev qhia tshwj xeeb uas tau teev tseg hauv ntu no xa mus rau qhov ntsuas kub ntawm 20 ° C (± 5 ° C) - Zoo SpA muaj cai thov kev hloov kho rau cov khoom txhua lub sijhawm thaum pom tias tsim nyog, thaum tuav cov haujlwm zoo ib yam thiab xav siv.

Ntse-Control
Fais fab mov	9-30V DC ± 10%
Cov tswv yim	2 0-10V lossis digital inputs. 1 serial 1-wire input
Cov zis	2 muaj peev xwm-pub dawb tawm
Txhawb digital sensors	6 DS18B20 los yog 1 DHT22
Maximum tam sim no ntawm cov zis	150 mA
Qhov siab tshaj plaws voltage ntawm outputs	30V DC / 20V AC ± 5%
Built-in kub sensor ntsuas ntau yam	-55 ° C - 126 ° C
Ua haujlwm kub	0-40 ° C
Qhov ntev (Qhov ntev x Dav x Qhov siab)	29 x 18 x 13 mm (1.14 "x 0.71" x 0.51")

• Xov tooj cua zaus ntawm ib tus neeg yuav tsum yog tib yam li koj tus Z-Wave xws li. Txheeb xyuas cov ntaub ntawv ntawm lub thawv lossis sab laj nrog koj tus neeg muag yog tias koj tsis paub meej.

Xov tooj cua transceiver
Xov tooj cua raws tu qauv	Z-Wave (500 series nti)
Zaus band	868.4 lossis 869.8 MHz EU 921.4 lossis 919.8 MHz ANZ
Transceiver ntau yam	txog li 50m tawm sab nraud mus txog 40m sab hauv tsev (nyob ntawm qhov chaw thiab lub tsev tsim qauv)
Max. xa lub zog	EIRP max. 7dbm ua

(*) Lub transceiver ntau yam muaj kev cuam tshuam los ntawm lwm yam khoom siv ua haujlwm ntawm tib zaus nrog kev sib kis tas mus li, xws li lub tswb thiab lub mloog pob ntseg uas cuam tshuam nrog lub chaw tswj hwm transceiver.

PRODUCT DISPOSAL

Cov khoom no yog ib feem tseem ceeb ntawm automation thiab yog li ntawd yuav tsum tau muab pov tseg ua ke nrog rau tom kawg.
Raws li nyob rau hauv installation, kuj nyob rau thaum xaus ntawm lub neej ntawm cov khoom, lub disassembly thiab scrapping ua hauj lwm yuav tsum tau ua los ntawm cov neeg ua hauj lwm tsim nyog. Cov khoom no yog tsim los ntawm ntau yam khoom siv, qee qhov tuaj yeem rov ua dua thaum lwm tus yuav tsum tau muab pov tseg. Nrhiav cov ntaub ntawv ntawm cov khoom siv rov ua dua tshiab thiab pov tseg uas pom los ntawm cov cai hauv zos hauv koj cheeb tsam rau cov khoom lag luam no. Ceev faj! - qee qhov ntawm cov khoom yuav muaj cov pa phem lossis cov khoom phom sij uas, yog tias muab pov tseg rau hauv ib puag ncig,
tej zaum yuav ua rau muaj kev puas tsuaj loj rau ib puag ncig lossis kev noj qab haus huv ntawm lub cev.
Raws li tau hais los ntawm lub cim ib sab, kev pov tseg ntawm cov khoom no hauv cov khoom pov tseg hauv tsev yog txwv nruj. Cais cov khoom pov tseg rau hauv pawg rau kev pov tseg, raws li txoj hauv kev pom los ntawm txoj cai tam sim no hauv koj cheeb tsam, lossis xa cov khoom xa rov qab mus rau tus neeg muag khoom thaum yuav khoom tshiab.
Ceev faj! - Kev cai lij choj hauv zos tuaj yeem pom tias yuav raug nplua loj nyob rau hauv qhov xwm txheej ntawm kev ua phem pov tseg ntawm cov khoom no.

DAIM NTAWV THOV KEV PAB CUAM

Ntawm no, Nice SpA, tshaj tawm tias cov khoom siv xov tooj cua hom Smart-Control yog ua raws li Cov Lus Qhia 2014/53/EU.
Cov ntawv sau tag nrho ntawm EU tshaj tawm txog kev ua raws li muaj nyob rau ntawm qhov chaw nyob hauv internet hauv qab no: http://www.niceforyou.com/en/support

Nyob zoo SpA
Oderzo TV Italia
info@niceforyou.com
www.niceforyou.com
IS0846A00EN_15-03-2022

Cov ntaub ntawv / Cov ntaub ntawv

Zoo Smart-Control Smart Functionalities rau Analog Devices [ua pdf] Phau ntawv qhia Smart-Control Smart Functionalities To Analog Devices, Smart-Control, Ntse Functionalities To Analog Devices, Functionalities To Analog Devices, Analog Devices, Devices

Cov ntaub ntawv

• Cov neeg siv phau ntawv