Ulwazi Lomkhiqizo

Amamojula e-Uni-I/OTM awumndeni wamamojula Okokufaka/Okukhiphayo ahambisana neplathifomu yokulawula ye-UniStreamTM. Angasetshenziswa ngokuhambisana nezilawuli ze-CPU namaphaneli e-HMI ukuze akhe i-All-in-one Programmable Logic Controller (PLC). Amamojula atholakalayo yi-UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, kanye ne-UID-0016T. Imininingwane yobuchwepheshe ingalandwa ku-Unitronics webindawo.

Ukufakwa
Ukufaka amamojula we-Uni-I/OTM:

1. Ngemuva kwanoma iyiphi Iphaneli ye-UniStreamTM HMI ehlanganisa i-CPU-for-Panel.
2. Kuloliwe we-DIN, usebenzisa Ikhithi Yokwandisa Yasendaweni.

Inombolo enkulu yamamojula e-Uni-I/OTM angaxhunywa kusilawuli se-CPU esisodwa anomkhawulo. Ukuze uthole imininingwane eyengeziwe, sicela ubheke amashidi ezicaciso we-UniStreamTM CPU noma imaphi amaKhithi Okwandisa Wendawo afanelekile.

Ngaphambi kokuthi Uqale
Ngaphambi kokufaka idivayisi, isifaki kufanele:

• Funda futhi uqonde incwadi yomsebenzisi.
• Qinisekisa okuqukethwe kwekhithi.

Izidingo zenketho yokufaka
Uma ufaka imojuli ye-Uni-I/O™ ku:

• Iphaneli ye-HMI ye-UniStream™; Iphaneli kufanele ibe ne-CPU-for-Panel, efakwe ngokuya ngomhlahlandlela wokufaka we-CPU-for-Panel.
• I-DIN-isitimela; kufanele usebenzise Ikhithi Yokwandisa Yasendaweni, etholakala nge-oda elihlukile, ukuze uhlanganise amamojula e-Uni-I/O™ ku-DIN-rail ibe isistimu yokulawula ye-UniStream™.

Uma kuvela noma yiziphi izimpawu ezilandelayo, funda okuhlobene ulwazi ngokucophelela:

Uphawu	Incazelo	Incazelo
	Ingozi	Ingozi ekhonjiwe idala ukulimala ngokomzimba kanye nempahla.
	Isexwayiso	Ingozi ekhonjiwe ingadala umonakalo emzimbeni kanye nempahla.
Isexwayiso	Isexwayiso	Qaphela.

• Konke exampi-les nemidwebo kuhloswe ngayo ukusiza ukuqonda, futhi akuqinisekisi ukusebenza. I-Unitronics ayiwamukeli umthwalo wemfanelo wokusetshenziswa kwangempela kwalo mkhiqizo ngokusekelwe kulawa exampLes.
• Sicela ulahle lo mkhiqizo ngokuya ngamazinga nemithetho kazwelonke yendawo nekazwelonke.
• Lo mkhiqizo kufanele ufakwe kuphela izisebenzi eziqeqeshiwe.
• Ukwehluleka ukuthobela izinkombandlela zokuphepha ezifanele kungabangela ukulimala okukhulu noma ukulimala kwempahla.
  Ungazami ukusebenzisa le divayisi ngemingcele eyeqa amazinga avunyelwe.
  Ungaxhumeki/unqamule idivayisi uma amandla avuliwe.

Ukucatshangelwa Kwemvelo
Lapho ufaka amamojula we-Uni-I/OTM, cabanga nge okulandelayo:

• Ukungenisa umoya: Kudingeka isikhala esingu-10mm (0.4) phakathi kwamaphethelo aphezulu/aphansi wedivayisi kanye nezindonga zendawo ebiyelwe.
• Ungafaki ezindaweni ezinothuli oluningi noma oluguquguqukayo, igesi ebolayo noma evuthayo, umswakama noma imvula, ukushisa okweqile, ukushaqeka komthelela ovamile noma ukudlidliza okukhulu, ngokuvumelana nezindinganiso nemikhawulo enikezwe eshidini lemininingwane yobuchwepheshe yomkhiqizo.
• Ungawabeki emanzini noma uvumele amanzi avuzele eyunithi.
• Ungavumeli imfucumfucu iwele ngaphakathi kweyunithi phakathi nokufakwa.
• Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.

Okuqukethwe Kwekhithi

• 1 Imojuli ye-Uni-I/OTM
• Amabhulokhi wetheminali angu-4 we-I/O (2 omnyama no-2 okumpunga)
• 1 iziqeshana ze-DIN-rail

Uni-I/O™ Umdwebo

1	Iziqeshana ze-DIN-rail	Nikeza ukwesekwa ngokomzimba kwe-CPU namamojula. Kuneziqeshana ezimbili: esisodwa phezulu (esibonisiwe), esinye singezansi (asikhonjiswa).
2	Mina / Os	I/O izindawo zokuxhuma
3
4	I/O Ibhasi – Kwesobunxele	Isixhumi sohlangothi lwesobunxele
5	Ilokhi Yesixhumi Sebhasi	Shelelezisa Ilokhi Yesixhumi Sebhasi kwesokunxele, ukuze uxhume ngogesi imojuli ye-Uni-I/O™ ku-CPU noma imojuli eseduze.
6	I/O Ibhasi – Kwesokudla	Isixhumi Sangakwesokudla, sithunyelwe simboziwe. Shiya umboziwe uma ungasetshenziswa.
	Ikhava Yesixhumi Sebhasi
7	Mina / Os	I/O izindawo zokuxhuma
8

9	Ama-LED we-I/O	Ama-LED aluhlaza
10
11	Isimo se-LED	I-Tricolor LED, Okuluhlaza/Obomvu/Owolintshi

12	Umnyango wemojuli	Ithunyelwa imbozwe ngeteyiphu yokuvikela ukuvikela umnyango ukuthi ungaklwebheki. Susa itheyiphu ngesikhathi sokufakwa.
13	Izikulufa izimbobo	Nika amandla ukukhweza iphaneli; ububanzi bembobo: 4mm (0.15”).

QAPHELA :Bheka ishidi lokucaciswa kwemojuli yezinkomba ze-LED.

Mayelana Nezixhumi Zebhasi ze-I/O
Izixhumi ze-I/O Bus zihlinzeka ngezindawo zokuxhuma ezingokwenyama nezikagesi phakathi kwamamojula. Isixhumi sithunyelwa simbozwe isembozo sokuzivikela, sivikela isixhumi emfucumfucwini, emonakalweni, kanye ne-ESD. I-I/O Bus – Kwesokunxele (#4 emdwebeni) ingaxhunywa ku-CPU-for-Panel, imojula ye-Uni-COM™ Communication, kwenye imojuli ye-Uni-I/O™ noma Iyunithi Yokuphela Yendawo. Ikhithi Yokunweba. I-I/O Bus – Right (#6 emdwebeni) ingaxhunywa kwenye imojuli ye-I/O, noma ku-Base Unit Yekhithi Yokwandisa Yasendaweni.
Isexwayiso :Uma imojula ye-I/O itholakala ekugcineni ekucushweni, futhi akukho okumele kuxhunywe kuyo, ungayisusi Ikhava yayo Yesixhumi Sebhasi.

Ukufakwa

• Vala amandla esistimu ngaphambi kokuxhuma noma ukunqamula noma imaphi amamojula noma amadivayisi.
• Sebenzisa izinyathelo ezifanele zokuvikela ukukhishwa kwe-Electro-Static Discharge (ESD).

Ukufaka i-Uni-I/O™ Module kuphaneli ye-UniStream™ HMI
QAPHELA: Isakhiwo sohlobo lwe-DIN-rail ngemuva kwephaneli sihlinzeka ngokusekelwa ngokomzimba kwemojuli ye-Uni-I/O™.

1. Hlola iyunithi ozoxhuma kuyo imojuli ye-Uni-I/O™ ukuze uqinisekise ukuthi Isixhumi sayo Sebhasi asimboziwe. Uma imojuli ye-Uni-I/O™ kuzoba ngeyokugcina ekucushweni, ungasusi ikhava yesixhumi sayo se-I/O Sebhasi – Kwesokudla.
2. Vula umnyango wemojuli ye-Uni-I/O™ bese uyibamba njengoba kukhonjisiwe emfanekisweni ohambisana nalesi sihloko.
3. Sebenzisa amahubhu angenhla naphansi (ulimi & groove) ukuze usheleleze imojuli ye-Uni-I/O™ endaweni.
4. Qinisekisa ukuthi iziqeshana ze-DIN-rail ezitholakala phezulu naphansi kwemojuli ye-Uni-I/O™ zingene ku-DIN-rail.
5. Shelelezisa Ilokhi Yesixhumi Sebhasi uye kwesokunxele njengoba kubonisiwe emfanekisweni ohambisana nalesi sihloko.
6. Uma isivele ikhona imojuli etholakala kwesokudla sayo, qedela ukuxhuma ngokuslayida ilokhi Yesixhumi Sebhasi seyunithi eseduze kwesokunxele.
7. Uma imojuli ingeyokugcina ekucushweni, shiya isixhumi sebhasi se-I/O simboziwe.

Ukukhipha Imojuli

1. Vala amandla esistimu.
2. Nqamula amatheminali e-I/O (#2,3,7,8 kumdwebo).
3. Nqamula imojuli ye-Uni-I/O™ kumayunithi ancikene: slayida i-Bus Connector Lock yayo kwesokudla. Uma kukhona iyunithi etholakala kwesokudla sayo, slayida ilokhi yale mojula kwesokudla futhi.
4. Kumojula ye-Uni-I/O™, donsela isiqeshana esiphezulu se-DIN-rail phezulu nesiqeshana esingezansi phansi.
5. Vula umnyango wemojula ye-Uni-I/O™ bese uyibamba ngeminwe emibili njengoba kukhonjisiwe emfanekisweni osekhasini lesi-3; bese uyidonsa ngokucophelela endaweni yayo.

Ifaka amamojula e-Uni-I/O™ ku-DIN-rail
Ukukhweza amamojula ku-DIN-rail, landela izinyathelo 1-7 Ekufakeni Imojula ye-Uni-I/O™ kuphaneli ye-UniStream™ HMI ekhasini 3. Ukuze uxhume amamojula kusilawuli se-UniStream™, kufanele usebenzise Ikhithi Yokwandisa Yasendaweni. Lawa makhithi atholakala ngamandla nangenawo, futhi anezintambo ezinobude obuhlukene. Ukuze uthole ulwazi oluphelele, sicela ubheke umhlahlandlela wokufaka wekhithi yokwandisa yasendaweni efanele.

Amamojula Okufaka izinombolo
Ungafaka izinombolo zamamojula ngezinjongo zereferensi. Isethi yezitikha ezingu-20 inikezwa nge-CPU-for-Panel ngayinye; sebenzisa lezi zitikha ukuze ufake izinombolo kumamojula.

• Isethi iqukethe izitika ezinezinombolo nezingenalutho njengoba kukhonjisiwe emfanekisweni ongakwesokunxele.
• Wabeke kumamojula njengoba kukhonjisiwe emfanekisweni ongakwesokudla.

Ukuhambisana kwe-UL

Isigaba esilandelayo sihambisana nemikhiqizo ye-Unitronics esohlwini lwe-UL.
Amamodeli alandelayo: I-UIA-0006, UID-0808R, UID-W1616R, UIS-WCB1 ifakwe kuhlu lwezindawo ezinobungozi.
Amamodeli alandelayo: UIA-0006, UIA-0402N, UIA-0402NL, UIA-0800N,UID-0016R,
UID-0016RL,UID-0016T,UID-0808R,UID-0808RL,UID-0808T,UID-0808THS, UID-0808THSL, UID-0808TL, UID-1600, UID-1600L, UID-1616WID-WID1616 I-04PTKN, UIS-04PTN, UIS-08TC, UIS-WCB1, UIS-WCB2 zifakwe kuhlu lwe-UL Lendawo Ejwayelekile.

Izilinganiso ze-UL, Izilawuli Ezihlelekayo ezizosetshenziswa Ezindaweni Eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D
Lawa manothi okukhishwa ahlobene nayo yonke imikhiqizo ye-Unitronics enezimpawu ze-UL ezisetshenziselwa ukumaka imikhiqizo egunyazwe ukusetshenziswa ezindaweni eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D.

Isexwayiso

• Lo mshini ulungele ukusetshenziswa Ekilasini I, Isigaba 2, Amaqembu A, B, C kanye no-D, noma ezindaweni ezingezona eziyingozi kuphela.
• Izintambo zokufaka nokuphumayo kufanele zihambisane nezindlela zokufaka izintambo zeSigaba I, isigaba 2 futhi ngokuhambisana negunya elinegunya.
• ISEXWAYISO: Ingozi Yokuqhuma—ukushintshanisa izingxenye kungase kukhinyabeze ukufaneleka Kwekilasi I, Isigaba 2.
• INGOZI YOKUQHUBEKA - Ungaxhumi noma unqamule amathuluzi ngaphandle uma ugesi ucishiwe noma indawo yaziwa ngokuthi ayinayo ingozi.
• Ukuchayeka kwamanye amakhemikhali kungase kuthuntubeze izici zokuvala zezinto ezisetshenziswa ku-Relay.
• Lo mshini kufanele ufakwe kusetshenziswa izindlela zokufaka izintambo njengoba kudingeka ku-Class I, Division 2 ngokwe-NEC kanye/noma i-CEC.

UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, UID-0016T Umhlahlandlela 

Izintambo

• Lesi sixhobo siklanyelwe ukusebenza kuphela ezindaweni ze-SELV/PELV/Class 2/Limited Power.
• Zonke izinto ezinikezwa amandla ohlelweni kufanele zifake ukufakwa kabili. Okuphumayo kokuphakelwa kwamandla kumele kukalwe njengokuthi SELV/PELV/Class 2/Limited Power.
• Ungaxhumi isignali 'Yokumaphakathi' noma 'Yomugqa' ye-110/220VAC kuphoyinti ledivayisi le-0V.
• Ungazithinti izintambo ezibukhoma.
• Yonke imisebenzi yokufaka izintambo kufanele yenziwe ngenkathi amandla EVALIWE.
• Sebenzisa ukuvikela okudlulele, okufana ne-fuse noma i-circuit breaker, ukugwema ama-currents amaningi embobeni yokunikezela yemojuli ye-Uni-I/O™.
• Amaphoyinti angasetshenzisiwe akufanele axhunywe (ngaphandle uma kucaciswe ngenye indlela). Ukuziba lesi siqondiso kungase kulimaze idivayisi.
•  Hlola kabili zonke izintambo ngaphambi kokuvula ugesi.

Isexwayiso

• Ukuze ugweme ukulimaza ucingo, sebenzisa i-torque engu-0.5 N·m (5 kgf·cm).
• Ungasebenzisi ithini, i-solder, nanoma iyiphi into ocingweni olukhumuliwe olungase lunqamuke umucu wocingo.
• Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.

Inqubo yokufaka izintambo
Sebenzisa amatheminali e-crimp ukwenza izintambo; sebenzisa intambo engu-26-12 AWG (0.13 mm2 –3.31 mm2).

1. Hlikihla ucingo lube ubude obungu-7±0.5mm (0.250–0.300 amayintshi).
2. Khipha itheminali endaweni yayo ebanzi kakhulu ngaphambi kokufaka intambo.
3. Faka intambo ngokuphelele kutheminali ukuze uqinisekise uxhumano olufanele.
4. Qinisa ngokwanele ukugcina intambo ingadonsi mahhala.

Amaphuzu Wokuxhuma Wemojuli ye-Uni-I/O™
Yonke imidwebo yezintambo nemiyalo kulo mbhalo ibhekisela ezindaweni zokuxhuma ze-I/O zamamojula ahlukene. Lawa ahlelwe ngamaqembu amane anamaphuzu ayisikhombisa ngalinye, njengoba kuboniswe emibalweni engezansi.

Imihlahlandlela yezintambo
Ukuze uqinisekise ukuthi idivayisi izosebenza kahle futhi igweme ukuphazamiseka kwe-electromagnetic:

• Sebenzisa ikhabethe lensimbi. Qinisekisa ukuthi ikhabethe neminyango yalo kufakwe udaka ngendlela efanele.
• Sebenzisa izintambo ezinobukhulu obufanele bomthwalo.
• Hambisa isignali ngayinye ye-I/O ngentambo yayo evamile ezinikele. Xhuma izintambo ezivamile kumaphoyinti azo avamile (CM) kumojuli ye-I/O.
• Ngamunye xhuma iphoyinti elingu-0V kusistimu kutheminali engu-0V kagesi.
• Ngamunye xhuma iphoyinti lomhlaba elisebenzayo ( ) nomhlaba wesistimu
  (okungcono ku-chassis yekhabhinethi yensimbi). Sebenzisa izintambo ezimfishane neziwugqinsi ngangokunokwenzeka: ngaphansi kuka-1m (3.3') ubude, ubukhulu obuncane obungu-14 AWG (2 mm2).
• Xhuma ugesi ongu-0V emhlabeni wesistimu.

QAPHELA: Ukuze uthole ulwazi oluningiliziwe, bheka idokhumenti Iziqondiso Zezintambo Zesistimu, ezitholakala Kumtapo Wezincwadi Wezobuchwepheshe ku-Unitronics' webindawo.

Ukuhlanganisa Okokufaka: UID-0808R, UID-0808T, UID-1600

I-UID-0808R
Okufakiwe kuhlelwe ngamaqembu amabili angawodwa:

I-UID-0808T

• I-I0-I3 yabelana nge-CM0 evamile
• I-I4-I7 yabelana nge-CM1 evamile

UID-1600
Okokufaka kuhlelwe ngamaqembu amane angawodwa:

• I-I0-I3 yabelana nge-CM0 evamile
• I-I4-I7 yabelana nge-CM1 evamile
• I-I8-I11 yabelana nge-CM2 evamile
• I-I12-I15 yabelana nge-CM3 evamile

Iqembu ngalinye lokufakwayo lingase libe nentambo njengosinki noma umthombo. Faka ucingo eqenjini ngalinye ngokwezibalo ezingezansi.

QAPHELA

• Sebenzisa izintambo zokufaka zikasinki ukuze uxhume idivayisi ye-sourcing (pnp).
• Sebenzisa izintambo zokufaka zomthombo ukuze uxhume idivayisi ezikayo (npn).

Ifaka izintambo Okokufaka UID-0808THS
Okufakiwe kuhlelwe ngamaqembu amabili angawodwa:

• I-I0-I3 yabelana nge-CM0 evamile
• I-I4-I7 yabelana nge-CM1 evamile

Iqembu ngalinye lingase libe nezintambo njengosinki noma umthombo. Okokufaka i-I0, i-I1, i-I4, ne-I5 ingalungiselelwa njengokufakwayo okujwayelekile kwedijithali noma okokufaka kwesivinini esiphezulu okungathola amasignali we-pulse yesivinini esiphezulu avela kuzinzwa noma izifaki khodi ze-shaft.

• Okokufaka kwe-I2, i-I3, i-I6 ne-I7 kungasebenza kuphela njengokufakwayo okujwayelekile kwedijithali.

Izindlela Zokufaka Ezisheshayo
Okulandelayo yimisebenzi yamaphinikhodi ehlukene yamashaneli anesivinini esikhulu:

	Isiteshi 1			Isiteshi 2
	I0	I1		I4	I5
I-quadrature	Isigaba A	Isigaba B		Isigaba A	Isigaba B
I-Pulse/Direction	I-Pulse	Isiqondiso		I-Pulse	Isiqondiso

QAPHELA

• Amamodi okokufaka asethwa kokubili ngezintambo nesofthiwe.
• Uma uxhuma imithombo ye-pulse ngaphandle kwesignali yesiqondiso, shiya iphinikhodi yesiqondisindlela ingaxhunyiwe. Qaphela ukuthi kulokhu kucushwa, iphinikhodi yesikhombisi ayikwazi ukusetshenziswa njengokufaka okuvamile.

QAPHELA

• Sebenzisa izintambo zokufaka zikasinki ukuze uxhume idivayisi ye-sourcing (pnp).
• Sebenzisa izintambo zokufaka zomthombo ukuze uxhume idivayisi ezikayo (npn).

I-Wiring Relay Outputs: UID-0808R, UID-0016R
Ukunikezwa kwamandla okukhiphayo
Okuphumayo kwe-relay kudinga ukunikezwa kwamandla kwangaphandle kwe-24VDC. Xhuma amatheminali angu-24V kanye ne-0V njengoba kukhonjisiwe esithombeni esingezansi.

• Ukuze ugweme ingcuphe yomlilo noma yokulimala kwempahla, sebenzisa umthombo wamanje okhawulelwe njalo noma xhuma idivayisi yamanje ekhawulelayo ochungechungeni noxhumana nabo abadluliswayo.
• I-0V yemojula kufanele ixhunywe ku-0V Yephaneli ye-HMI. Ukuziba lesi siqondiso kungase kulimaze idivayisi.
• Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma imojuli ekunikezeni amandla okulawulwayo.

I-UID-0808R

Imiphumela ihlelwe ngamaqembu amabili angawodwa:

• I-O0-O3 yabelana nge-CM2 evamile
• I-O4-O7 yabelana nge-CM3 evamile

I-UID-0016R
Okuphumayo kuhlelwe ngamaqembu amane angawodwa:

• I-O0-O3 yabelana nge-CM0 evamile
• I-O4-O7 yabelana nge-CM1 evamile
• I-O8-O11 yabelana nge-CM2 evamile
• I-O12-O15 yabelana nge-CM3 evamile

Faka iqembu ngocingo ngokwesibalo esihambisana naso.

Ukwandisa ubude besikhathi sokuxhumana
Ukwandisa ubude besikhathi sokuphila koxhumana nabo abadluliswayo futhi uvikele imojuli emonakalweni ongase ube khona ngokuhlehla kwe-EMF, xhuma:

• a clamping diode ngokuhambisana nomthwalo ngamunye we-DC ongenisayo.
• isekethe ye-RC snubber ngokuhambisana nomthwalo ngamunye we-AC ongenisayo.

I-Wiring Transistor Outputs: UID-0808T, UID-0016T
Ukunikezwa kwamandla okukhiphayo
Ukusetshenziswa kwanoma yikuphi ukuphuma kudinga ukunikezwa kwamandla kwangaphandle kwe-24VDC njengoba kukhonjisiwe esithombeni esihambisana nalesi sihloko.

• Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma idivayisi ekunikezeni amandla okulawulwayo.

Imiphumela
Xhuma amatheminali angu-24V kanye ne-0V njengoba kuboniswe esithombeni esihambisana nalesi sihloko.

I-UID-0808T
I-O0-O7 yabelana ngembuyiselo evamile engu-0V

I-UID-0016T
I-O0-O15 yabelana ngembuyiselo evamile engu-0V

Ifaka izintambo kokuphumayo kwe-UID-0808THS Ukunikezwa kwamandla okukhiphayo 

• Ukusetshenziswa kwanoma yikuphi okuphumayo kudinga ukuphakelwa kukagesi kwangaphandle kwe-24VDC njengasesithombeni esihambisana nalesi sihloko.
• Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma idivayisi ekunikezeni amandla okulawulwayo.

Imiphumela 

• Xhuma idivayisi yamanje ekhawulelayo ochungechungeni olunemiphumela ethi O0 ne-O1. Okukhiphayo O2 kuya ku-O7 kuvikelwe ngesiyingi esifushane.
• Imiphumela ye-O0 ne-O1 ingahlelwa njengemiphumela evamile yedijithali noma njengemiphumela ye-PWM enesivinini esikhulu.
• Okukhiphayo i-O4 ne-O5 ingacushwa njengemiphumela evamile yedijithali noma njengemiphumela evamile ye-PWM.

Bheka ishidi lemininingwane ukuze uthole imininingwane enemininingwane mayelana nezinhlobo zokuphuma kwe-PWM.

• Okukhiphayo O2, O3, O6 kanye ne-O7 kungasebenza kuphela njengemiphumela evamile yedijithali.
• Okulandelayo yimisebenzi yamaphinikhodi ehlukene yeziteshi ze-PWM:

	Isiteshi 1			Isiteshi 2
	O0	O1		O4	O5
PWM, okukhiphayo okukodwa	I-PWM	Idijithali evamile		I-PWM	Idijithali evamile
I-PWM, imiphumela emibili	I-PWM	I-PWM		I-PWM	I-PWM

Isivinini esiphezulu se-PWM Outputs
Sebenzisa ikhebuli evikelekile ekufakeni izintambo i-O0 noma i-O1 uma isethwe ukuthi isebenze njengokuphumayo kwe-High Speed ​​PWM.

Isexwayiso 

• Uma Okuphumayo O0 kanye ne-O1 kuzosebenza njengokuphumayo kwesivinini esikhulu, kuxhume usebenzisa i-CM2. Ungaxhumi i-CM2 kusistimu engu-0V.

Usayizi

Ulwazi olukulo mbhalo lubonisa imikhiqizo ngosuku lokuphrinta. I-Unitronics igodla ilungelo, kuncike kuyo yonke imithetho esebenzayo, nganoma yisiphi isikhathi, ngokubona kwayo kuphela, futhi ngaphandle kwesaziso, lokuyeka noma ukushintsha izici, imiklamo, izinto zokwakha kanye neminye imininingwane yemikhiqizo yayo, kanye nokuhoxisa unomphela noma okwesikhashana noma yikuphi abashiye emakethe. Lonke ulwazi olukule dokhumenti lunikezwa “njengoba lunjalo” ngaphandle kwewaranti yanoma yiluphi uhlobo, evezwayo noma eshiwo, kuhlanganisa kodwa kungagcini kunoma yiziphi iziqinisekiso ezisikiselwayo zokuthengiselana, ukufaneleka kwenjongo ethile, noma ukungaphuli umthetho. I-Unitronics ayithwesi icala ngamaphutha noma ukweqiwa kolwazi olwethulwe kulo mbhalo. Akukho mcimbi lapho i-Unitronics izobophezeleka khona nganoma yimuphi umonakalo okhethekile, wengozi, ongaqondile noma umphumela wanoma yiluphi uhlobo, noma yimuphi umonakalo ovela ngenxa noma ohlobene nokusetshenziswa noma ukwenziwa kwalolu lwazi. Amagama okuhweba, izimpawu zokuhweba, amalogo kanye nezimpawu zesevisi ezivezwe kulo mbhalo, kuhlanganisa nokwakheka kwazo, kuyimpahla ye-Unitronics (1989) (R”G) Ltd. noma ezinye izinkampani zangaphandle futhi awuvunyelwe ukuzisebenzisa ngaphandle kwemvume ebhalwe ngaphambili. ze-Unitronics noma umuntu wesithathu ongase abe ngabanikazi bazo

I-Uni-I/O™ iwumndeni wamamojula Okokufaka/Okukhiphayo ahambisana nenkundla yokulawula ye-UniStream™.
Lo mhlahlandlela uhlinzeka ngolwazi oluyisisekelo lokufakwa kwamamojula e-UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, kanye ne-UID-0016T. Imininingwane yobuchwepheshe ingalandwa ku-Unitronics webindawo. Inkundla ye-UniStream™ ihlanganisa abalawuli be-CPU, amaphaneli e-HMI, namamojula endawo e-I/O ahlanganayo akhe i-All-in-one Programmable Logic Controller (PLC).

Faka amamojula e-Uni-I/O™: 

• Ngemuva kwanoma iyiphi Iphaneli ye-UniStream™ HMI ehlanganisa i-CPU-for-Panel.
• Kuloliwe we-DIN, usebenzisa Ikhithi Yokwandisa Yasendaweni.

Inombolo enkulu yamamojula e-Uni-I/O™ angaxhunywa kusilawuli se-CPU esisodwa anomkhawulo. Ukuze uthole imininingwane, sicela ubheke amashidi acacisiwe we-UniStream™ CPU noma imaphi amakhithi Asendaweni Abalulekile Okwandisa.