Bayanin samfur

Abubuwan Uni-I/OTM dangi ne na na'urori masu shigar da bayanai / fitarwa waɗanda suka dace da dandalin sarrafa UniStreamTM. Za a iya amfani da su tare da masu kula da CPU da masu kula da HMI don samar da duk-in-daya Mai sarrafa dabaru (PLC). Modulolin da ake samu sune UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, da UID-0016T. Ana iya sauke ƙayyadaddun fasaha daga Unitronics website.

Shigarwa
Don shigar da kayan aikin Uni-I/OTM:

1. A bayan kowane UniStreamTM HMI Panel wanda ya ƙunshi CPU-for-Panel.
2. A kan hanyar dogo ta DIN, ta amfani da Kit ɗin Faɗaɗɗen Gida.

Matsakaicin adadin samfuran Uni-I/OTM waɗanda za a iya haɗa su da mai sarrafa CPU guda ɗaya yana iyakance. Don ƙarin cikakkun bayanai, da fatan za a koma zuwa ƙayyadaddun takaddun na UniStreamTM CPU ko kowane kayan Faɗawa na Gida mai dacewa.

Kafin Ka Fara
Kafin shigar da na'urar, mai sakawa dole ne:

• Karanta kuma ku fahimci jagorar mai amfani.
• Tabbatar da abinda ke cikin kit.

Bukatun zaɓin shigarwa
Idan kana shigar da tsarin Uni-I/O™ akan:

• Ƙungiyar UniStream™ HMI; Dole ne kwamitin ya ƙunshi CPU-don-Panel, wanda aka shigar bisa ga jagorar shigarwa na CPU-don-Panel.
• A DIN-rail; Dole ne ku yi amfani da Kit ɗin Faɗawa Na Gida, wanda ake samu ta tsari daban, don haɗa samfuran Uni-I/O™ akan layin dogo na UniStream™ zuwa tsarin sarrafa UniStream™.

Lokacin da ɗaya daga cikin alamomin masu biyowa suka bayyana, karanta haɗin gwiwa bayani a hankali:

Alama	Ma'ana	Bayani
	hadari	Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya.
	Gargadi	Hatsarin da aka gano na iya haifar da asarar ta jiki da ta dukiya.
Tsanaki	Tsanaki	Yi amfani da hankali.

• Duk examples da zane-zane an yi nufin su taimaka fahimta, kuma ba su da garantin aiki. Unitronics ba ta karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
• Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.
• ƙwararrun ma'aikata kawai ya kamata a shigar da wannan samfurin.
• Rashin bin ƙa'idodin tsaro masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya.
  Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini.
  Kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli
Lokacin shigar da kayan aikin Uni-I/OTM, la'akari da mai zuwa:

• Samun iska: Ana buƙatar 10mm (0.4) na sarari tsakanin saman na'urar / gefuna na ƙasa da bangon shinge.
• Kada a sanyawa a cikin wuraren da ke da ƙura mai ƙura ko ƙura, gurɓataccen iska ko mai ƙonewa, danshi ko ruwan sama, zafi mai wuce kima, girgiza ta yau da kullun ko firgita, daidai da ƙa'idodi da iyakoki da aka bayar a cikin takaddar ƙayyadaddun samfurin.
• Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
• Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Abubuwan da ke cikin Kit

• 1 Uni-I/OTM module
• 4 I/O tasha tubalan (2 baki da 2 launin toka)
• 1 DIN-rail shirye-shiryen bidiyo

Tsarin Uni-I/O™

1	DIN-rail shirye-shiryen bidiyo	Bayar da goyan bayan jiki don CPU da kayayyaki. Akwai shirye-shiryen bidiyo guda biyu: ɗaya a saman (an nuna), ɗaya a ƙasa (ba a nuna ba).
2	Ni / Os	Abubuwan haɗin I/O
3
4	Bas na I/O - Hagu	Haɗin Hagu
5	Kulle Mai Haɗin Bas	Zamar da Makullin Haɗin Bus zuwa hagu, don haɗa na'urar Uni-I/O™ ta hanyar lantarki zuwa CPU ko module ɗin da ke kusa.
6	I/O Bas - Dama	Mai Haɗin Gefen Dama, an yi jigilar kaya a rufe. Bar rufe lokacin da ba a amfani da shi.
	Murfin Haɗin Bas
7	Ni / Os	Abubuwan haɗin I/O
8

9	LEDs I/O	Green LEDs
10
11	Matsayin LED	Tricolor LED, Green/Ja/Orange

12	Ƙofar Module	An yi jigilar kaya an lulluɓe da tef ɗin kariya don hana kofa kofa. Cire tef yayin shigarwa.
13	Matsakaicin ramuka	Kunna panel-hawan; rami diamita: 4mm (0.15").

NOTE :Duba takardar ƙayyadaddun module don alamun LED.

Game da I/O Bus Connectors
Masu haɗin Bus na I/O suna ba da wuraren haɗin jiki da na lantarki tsakanin kayayyaki. Ana jigilar mai haɗawa da murfin kariya, yana kare mai haɗawa daga tarkace, lalacewa, da ESD. Bus na I/O - Hagu (# 4 a cikin zane) ana iya haɗa shi zuwa ko dai CPU-for-Panel, tsarin sadarwa na Uni-COM™, zuwa wani tsarin Uni-I/O ™ ko zuwa Ƙarshen Rukunin Ƙarshen Fadada Gida. Bas ɗin I/O - Dama (#6 a cikin zane) ana iya haɗa shi zuwa wani tsarin I/O, ko zuwa Rukunin Tushe na Kit ɗin Faɗawar Gida.
Tsanaki:Idan tsarin I/O yana ƙarshe a cikin tsarin, kuma babu abin da za a haɗa shi da shi, kar a cire murfin Haɗin Bus ɗin sa.

Shigarwa

• Kashe wutar tsarin kafin haɗi ko cire haɗin kowane kayayyaki ko na'urori.
• Yi amfani da matakan da suka dace don hana Electro-Static Discharge (ESD).

Shigar da Module Uni-I/O™ akan UniStream™ HMI Panel
NOTE: Tsarin nau'in dogo na DIN a bayan kwamitin yana ba da goyan bayan jiki don ƙirar Uni-I/O™.

1. Bincika sashin da zaku haɗa tsarin Uni-I/O™ don tabbatar da cewa ba a rufe Haɗin Bus ɗin sa. Idan tsarin Uni-I/O™ zai zama na ƙarshe a cikin tsarin, kar a cire murfin mai Haɗin Bus ɗin sa na I/O - Dama.
2. Bude ƙofar Uni-I/O™ module kuma riƙe shi kamar yadda aka nuna a hoton da ke biye.
3. Yi amfani da manyan ramummuka na sama da na ƙasa (harshe & tsagi) don zamewa Uni-I/O™ module zuwa wuri.
4. Tabbatar cewa shirye-shiryen bidiyo na DIN-dogon da ke sama da kasa na tsarin Uni-I/O™ sun tsinci kan DIN-dogon.
5. Zamar da Makullin Haɗin Bus har zuwa hagu kamar yadda aka nuna a hoton da ke gaba.
6. Idan akwai rigar tsarin da ke hannun dama, kammala haɗin gwiwa ta hanyar zamewa makullin Haɗin Bus na sashin da ke kusa zuwa hagu.
7. Idan tsarin shine na ƙarshe a cikin daidaitawa, bar mai haɗin bas na I/O an rufe shi.

Cire Module

1. Kashe wutar tsarin.
2. Cire haɗin tashoshin I/O (#2,3,7,8 a cikin zane).
3. Cire haɗin tsarin Uni-I/O™ daga raka'o'in da ke kusa: zame Makullin Haɗin Bus ɗin sa zuwa dama. Idan akwai naúrar da ke hannun dama, zame mukullin wannan tsarin zuwa dama shima.
4. A kan tsarin Uni-I/O™, ja babban shirin DIN-dogon sama da shirin ƙasa.
5. Bude kofar tsarin Uni-I/O™ kuma ka rike shi da yatsu biyu kamar yadda aka nuna a cikin adadi a shafi na 3; sannan a janye shi daga inda yake.

Shigar da kayan aikin Uni-I/O™ akan hanyar dogo ta DIN
Don hawa kayayyaki akan DIN-rail, bi matakai 1-7 a Shigar da Module Uni-I/O™ akan UniStream™ HMI Panel a shafi na 3. Domin haɗa na'urorin zuwa mai sarrafa UniStream™, dole ne ka yi amfani da Kit ɗin Faɗawa Gida. Ana samun waɗannan kayan aikin tare da ba tare da samar da wutar lantarki ba, kuma tare da igiyoyi masu tsayi daban-daban. Don cikakkun bayanai, da fatan za a koma zuwa jagorar shigarwa na Kit ɗin Faɗawar Gida mai dacewa.

Modulolin Lambobi
Kuna iya ƙididdige ƙididdiga don dalilai na tunani. An samar da saitin lambobi 20 tare da kowane CPU-for-Panel; yi amfani da waɗannan lambobi don ƙididdige samfuran.

• Saitin ya ƙunshi lambobi da lambobi marasa komai kamar yadda aka nuna a adadi na hagu.
• Sanya su a kan kayayyaki kamar yadda aka nuna a cikin adadi a dama.

Farashin UL

Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
Samfura masu zuwa: UIA-0006, UID-0808R, UID-W1616R, UIS-WCB1 an jera UL don Wurare masu haɗari.
Samfura masu zuwa: UIA-0006, UIA-0402N, UIA-0402NL, UIA-0800N, UID-0016R,
UID-0016RL,UID-0016T,UID-0808R,UID-0808RL,UID-0808T,UID-0808THS,UID-0808THSL UIS-0808PTKN, UIS-1600PTN, UIS-1600TC, UIS-WCB1616, UIS-WCB1616 sune UL da aka jera don Wuri na Musamman.

Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki

• Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wuraren da ba masu haɗari kawai.
• Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
• GARGADI: Hatsarin fashewa-Masanin abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
• HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• Fitarwa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, UID-0016T Jagora 

Waya

• An tsara wannan kayan aikin don yin aiki kawai a SELV/PELV/Class 2/ Iyakantaccen Wutar Wuta.
• Duk kayan wutar lantarki a cikin tsarin dole ne su haɗa da rufi biyu. Dole ne a ƙididdige abubuwan samar da wutar lantarki azaman SELV/PELV/Class 2/Iyakantaccen Ƙarfi.
• Kar a haɗa siginar 'Neutral' ko 'Layi' na 110/220VAC zuwa wurin 0V na na'urar.
• Kar a taɓa wayoyi masu rai.
• Duk ayyukan wayoyi yakamata a yi su yayin da wuta ke KASHE.
• Yi amfani da kariya ta yau da kullun, kamar fuse ko mai watsewa da'ira, don guje wa wuce gona da iri a cikin tashar samar da kayayyaki na Uni-I/O™.
• Ba za a haɗa wuraren da ba a yi amfani da su ba (sai dai idan an ƙayyade). Yin watsi da wannan umarnin na iya lalata na'urar.
•  Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.

Tsanaki

• Don guje wa lalata waya, yi amfani da matsakaicin karfin juyi na 0.5 N·m (5 kgf·cm).
• Kada a yi amfani da gwano, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Tsarin Waya
Yi amfani da crimp tashoshi don wayoyi; amfani da 26-12 AWG waya (0.13 mm2 -3.31 mm2).

1. Cire waya zuwa tsayin 7± 0.5mm (0.250-0.300 inci).
2. Cire tashar zuwa mafi girman matsayi kafin saka waya.
3. Saka waya gaba daya a cikin tashar don tabbatar da haɗin kai mai kyau.
4. Maƙarƙashiya don kiyaye waya daga ja kyauta.

Uni-I/O™ Abubuwan Haɗin Module
Duk zane-zane na wayoyi da umarni a cikin wannan takarda suna komawa zuwa wuraren haɗin I/O na nau'ikan nau'ikan daban-daban. An tsara waɗannan a rukuni huɗu na maki bakwai kowanne, kamar yadda aka nuna a cikin alkalumman da ke ƙasa.

Ka'idojin Waya
Domin tabbatar da cewa na'urar za ta yi aiki yadda ya kamata da kuma guje wa tsangwama na lantarki:

• Yi amfani da kabad ɗin ƙarfe. Tabbatar cewa majalisar ministoci da kofofinta suna da ƙasa yadda ya kamata.
• Yi amfani da wayoyi waɗanda girmansu ya dace don kaya.
• Hanya kowace siginar I/O tare da keɓewar waya ta gama gari. Haɗa wayoyi gama-gari a maki na gama-gari (CM) a tsarin I/O.
• Kai ɗaya haɗa kowane maki 0V a cikin tsarin zuwa tashar wutar lantarki ta 0V.
• Kowane mutum yana haɗa kowane ma'anar ƙasa mai aiki ( ) zuwa ƙasan tsarin
  (zai fi dacewa zuwa chassis na karfe). Yi amfani da wayoyi mafi guntu kuma mafi kauri mai yuwuwa: ƙasa da 1m (3.3') tsayi, ƙaramin kauri 14 AWG (2 mm2).
• Haɗa wutar lantarki 0V zuwa ƙasa na tsarin.

NOTE: Don cikakkun bayanai, koma zuwa daftarin Jagororin Waya Waya, wanda ke cikin Laburaren Fasaha a cikin Unitronics' website.

Wayar da abubuwan shigarwa: UID-0808R, UID-0808T, UID-1600

UID-0808R
An tsara abubuwan shigar cikin ƙungiyoyi biyu keɓance:

UID-0808T

• I0-I3 raba gama gari CM0
• I4-I7 raba gama gari CM1

Bayanan Bayani na UID-1600
An tsara abubuwan shigar cikin ƙungiyoyi huɗu keɓance:

• I0-I3 raba gama gari CM0
• I4-I7 raba gama gari CM1
• I8-I11 raba gama gari CM2
• I12-I15 raba gama gari CM3

Kowace rukunin shigarwa ana iya haɗa shi azaman nutse ko tushe. Waya kowace ƙungiya bisa ga alkalumman da ke ƙasa.

NOTE

• Yi amfani da na'urar shigar da sink don haɗa na'urar samowa (pnp).
• Yi amfani da hanyar shigar da wayoyi don haɗa na'urar nutsewa (npn).

Yin Wayar da Abubuwan Shiga UID-0808THS
An tsara abubuwan shigar cikin ƙungiyoyi biyu keɓance:

• I0-I3 raba gama gari CM0
• I4-I7 raba gama gari CM1

Ana iya haɗa kowane rukuni azaman nutse ko tushe. Ana iya daidaita abubuwan shigar da I0, I1, I4, da I5 azaman abubuwan shigar da dijital na yau da kullun ko azaman abubuwan shigar da sauri waɗanda zasu iya karɓar siginar bugun bugun jini mai girma daga na'urori masu auna firikwensin ko na'ura mai shinge.

• Abubuwan shigarwa I2, I3, I6 da I7 na iya aiki azaman abubuwan shigar da dijital na yau da kullun.

Hanyoyin Shigar da Babban Gudu
Masu zuwa sune ayyukan fil daban-daban don tashoshi masu saurin gudu:

	Channel 1			Channel 2
	I0	I1		I4	I5
Yankin huɗu	Mataki A	Lokaci B		Mataki A	Lokaci B
Pulse/Direction	Pulse	Hanyar		Pulse	Hanyar

NOTE

• An saita yanayin shigarwa duka ta hanyar wayoyi da software.
• Lokacin haɗa hanyoyin bugun bugun jini ba tare da siginar shugabanci ba, bar fil ɗin ba a haɗa shi ba. Lura cewa a cikin wannan saitin, ba za a iya amfani da fil ɗin jagora azaman shigarwar al'ada ba.

NOTE

• Yi amfani da na'urar shigar da sink don haɗa na'urar samowa (pnp).
• Yi amfani da hanyar shigar da wayoyi don haɗa na'urar nutsewa (npn).

Abubuwan Waya Relay: UID-0808R, UID-0016R
Fitar da wutar lantarki
Abubuwan da ake fitarwa na relay suna buƙatar samar da wutar lantarki na 24VDC na waje. Haɗa tashoshi na 24V da 0V kamar yadda aka nuna a hoton da ke ƙasa.

• Don guje wa haɗarin gobara ko lalacewar dukiya, koyaushe yi amfani da ƙayyadaddun tushe na yanzu ko haɗa na'ura mai iyakancewa na yanzu a jere tare da lambobin sadarwa na relay.
• Dole ne a haɗa 0V na module ɗin zuwa 0V na HMI Panel. Yin watsi da wannan umarnin na iya lalata na'urar.
• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage bayani dalla-dalla na samar da wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

UID-0808R

An tsara abubuwan da aka fitar zuwa ƙungiyoyi biyu keɓe:

• O0-O3 suna raba gama gari CM2
• O4-O7 suna raba gama gari CM3

UID-0016R
An tsara abubuwan da aka fitar zuwa ƙungiyoyi huɗu keɓance:

• O0-O3 suna raba gama gari CM0
• O4-O7 suna raba gama gari CM1
• O8-O11 suna raba gama gari CM2
• O12-O15 suna raba gama gari CM3

Yi waya da kowane rukuni bisa ga adadi mai rakiyar.

Ƙara tsawon rayuwar sadarwa
Don ƙara tsawon rayuwar lambobin sadarwa da kuma kare tsarin daga yuwuwar lalacewa ta hanyar juyawa EMF, haɗa:

• da clamping diode a layi daya tare da kowane inductive DC lodi.
• da'irar RC snubber a layi daya tare da kowane nauyin AC inductive.

Fitar Wutar Lantarki na Waya: UID-0808T, UID-0016T
Fitar da wutar lantarki
Yin amfani da kowane ɗayan abubuwan da ake fitarwa yana buƙatar samar da wutar lantarki ta 24VDC ta waje kamar yadda aka nuna a cikin adadi mai rakiyar.

• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Abubuwan da aka fitar
Haɗa tashoshi na 24V da 0V kamar yadda aka nuna a hoton da ke gaba.

UID-0808T
O0-O7 rabo gama gari 0V

UID-0016T
O0-O15 rabo gama gari 0V

Wayar da Wutar Lantarki ta UID-0808THS Output 

• Amfani da kowane ɗayan abubuwan da aka fitar yana buƙatar samar da wutar lantarki ta 24VDC na waje kamar yadda yake a cikin adadi mai rakiyar.
• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Abubuwan da aka fitar 

• Haɗa na'urar ƙayyadaddun ƙayyadaddun halin yanzu a cikin jerin tare da abubuwan O0 da O1. Abubuwan da aka fitar O2 zuwa O7 suna da kariya ta gajeriyar kewayawa.
• Ana iya daidaita abubuwan da aka fitar O0 da O1 a matsayin ko dai na yau da kullun na dijital ko azaman babban abin fitarwa na PWM.
• Ana iya daidaita abubuwan da aka fitar O4 da O5 azaman ko dai na yau da kullun na dijital ko azaman abubuwan PWM na yau da kullun.

Koma takardar ƙayyadaddun bayanai don cikakkun bayanai game da nau'ikan fitarwa na PWM.

• Abubuwan da aka fitar O2, O3, O6 da O7 na iya aiki kawai azaman kayan aikin dijital na yau da kullun.
• Masu zuwa sune ayyukan fil daban-daban don tashoshin PWM:

	Channel 1			Channel 2
	O0	O1		O4	O5
PWM, fitarwa ɗaya	PWM	Digital Digital		PWM	Digital Digital
PWM, fitarwa biyu	PWM	PWM		PWM	PWM

Fitar PWM Mai Girma
Yi amfani da kebul mai kariya don yin wayan O0 ko O1 lokacin da aka saita su don aiki azaman fitowar PWM Mai Girma.

Tsanaki 

• Idan Abubuwan O0 da O1 za su yi aiki azaman abubuwan fitar da sauri, haɗa su ta amfani da CM2. Kar a haɗa CM2 zuwa tsarin 0V.

Girman

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci janye kowane daga cikinsu. da forgoing daga kasuwa. Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanin da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin. Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izini na farko ba. na Unitronics ko wani ɓangare na uku wanda zai iya mallake su

Uni-I/O™ dangi ne na kayan shigar da kayan sarrafawa/fitarwa waɗanda suka dace da dandalin sarrafa UniStream™.
Wannan jagorar tana ba da bayanan shigarwa na asali don UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, da UID-0016T kayayyaki. Ana iya sauke ƙayyadaddun fasaha daga Unitronics website. Dandalin UniStream™ ya ƙunshi masu kula da CPU, bangarorin HMI, da na'urorin I/O na gida waɗanda ke haɗuwa tare don samar da mai sarrafa dabaru na gaba ɗaya (PLC).

Shigar da kayan aikin Uni-I/O™: 

• A bayan kowane UniStream™ HMI Panel wanda ya ƙunshi CPU-for-Panel.
• A kan hanyar dogo ta DIN, ta amfani da Kit ɗin Faɗaɗɗen Gida.

Matsakaicin adadin abubuwan Uni-I/O™ waɗanda za a iya haɗa su da mai sarrafa CPU guda ɗaya yana iyakance. Don cikakkun bayanai, da fatan za a koma zuwa ƙayyadaddun takaddun UniStream™ CPU ko kowane kayan Faɗawa na Gida mai dacewa.